Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
MKM - Hero Knife by T. Rumici - Titanium and Carbon Fiber - PRIVATE COLLECTION - MK HR-CFT - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased.
* Condition: overall in good condition
* Commercially available
* Sharpening: factory sharpened
* Marks on blade: none
* Marks on handle: small marks on titanium head.
* Box: cardboard box with MKM Maniago Knife Makers logos.
* Scabbard: synthetic pouch with zipper closure and belt loop.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratoryIntended Use: Sporting
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic material pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-AP-HR-CFT -
MKM - Isonzo Clip Point by Vox - M390 & Marble Carbon Fiber - FX03M-3CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-3CM -
MKM - Isonzo Hawkbill by Vox - M390 & Marble Carbon Fiber - FX03M-1CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-1CM -
MKM - Isonzo Cleaver by Vox - M390 & Marble Carbon Fiber - FX03M-2CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-2CM -
MKM - Flame Light by Zieba - M390 & Green Micarta - FL02L-GC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-GC -
MKM - Miura - M390 Button Lock - Titanium Blue - MI-TBL - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-TBL -
MKM - Hero by Tommaso Rumici - M390, Titanium and G10 Black - MK-HR-GTBK - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: G10 grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-GTBK -
MKM - Hero by Tommaso Rumici - M390, Titanium and Micarta Natural - MK-HR-NCT - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-NCT -
MKM & Mercury - Makro 2 Knife Sheepsfoot By Vox - Black G10 - MK-MA02-GBK - Sporting Knife
Intended use: Neck Knife / Sporty
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: G10
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 77g.
Scabbard: Black leather sheath, for neck, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA02-GBK -
MKM - Flame Light by Zieba - M390 & Black Micarta - FL02L-BC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-BC -
MKM & Mercury - Makro 1 knife Drop by Vox - Natural Micarta - MK MA01-NC - sports knife
Intended use: Sports
Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: Natural Micarta
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 67g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA01-NC -
MKM & Mercury - Makro 1 knife Drop by Vox - Black G10 - MK MA01-GBK - sports knife
Intended use: Sports
Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: G10
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA01-GBK -
MKM - Maximo Flipper Knife Design by Bob Terzuola - Black Micarta - MK-MM-BCT - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Sheath: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-BCT -
MKM - Maximo Flipper Design by Bob Terzuola - Green Micarta - MK-MM-GCT - folding knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Closure: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-GCT -
MKM - Maximo Flipper Knife Design by Bob Terzuola - Titanium - MK-MM-T - folding knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: Titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 134g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-T -
MKM - Goccia Flipper by Jens Anso - Dark Stonewashed Titanium - MK-GC-TDSW - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, Water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade Treatment: Dark Stonewashed
Handle: Dark Stonewashed Titanium with anodized titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 135g.
Closure: LinerLock
Clip: anodized titanium, deep pocket, removable
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-TDSW -
MKM - Goccia Flipper by Jens Anso - Bronze Titanium - MK-GC-TBR - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, the water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: satin finish
Handle: Bronze anodized titanium with stonewashed titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 135g.
Closure: LinerLock
Clip: stonewashed titanium, deep pocket, removable
Scabbard: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-TBR -
MKM - Goccia Flipper by Jens Anso - Black G10 - MK-GC-GBK - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, the water, which in 1453 moved the hammers to forge the first blades and that has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: satin finish
Handle: G10, with stainless steel embedded liners and anodized titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total lenght: 200mm.
Thickness when closed: 15mm
Weight: 110g.
Closure: LinerLock
Clip: anodized titanium, deep pocket, removable
Sheath: Nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-GBK -
MKM - Goccia Flipper by Jens Anso - Green Canvas Micarta - MK-GC-GC - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, Water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: Satin finish
Handle: Micarta, with stainless steel embedded liners and titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 110g.
Closure: LinerLock
Clip: Titanium, deep pocket, removable
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-GC -
MKM - Edge - SlipJoint by Graciut - Titanium Bronze - MKEG-TBR - knife
Intended Use: Sporty / Gentleman / EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade Treatment: Satin
Handle: Titanium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 72g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)MK-EG-TBR -
MKM - Edge - SlipJoint by Graciut - Aluminium Green - MKEG-AGR - knife
Intended Use: Sporty / Gentleman / EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Aluminium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 53g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)MK-EG-AGR -
MKM - Edge - SlipJoint by Graciut - Aluminium Black - MKEG-ABK - knife
Intended Use: Sporty / Gentleman / EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: Satin
Handle: Aluminium
Blade length: 76mm.
Blade thickness: 2.5mm.
Length closed: 102mm.
Total lenght: 174mm.
Thickness when closed: 12mm.
Weight: 53g.
Opening: two hands
Washers: Brass
Closure: Slip Joint
Clip: -
Scabbard: leather, with belt loop with magnetic release
Package: Cardboard box with logos MKM Maniago Knife Makers
Notes: Design by Bruno Bruna Graciut, Master CIC (Italian Knife Makers Guild)MK-EG-ABK -
MKM - Flame by Zieba - M390 PVD & Red Lava Fat Carbon - FL02-FCLTD - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Bohler M390 stainless steel
Blade finish: Black PVD
Handle: Titanium PVD and Fat Carbon Red Lava
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 61g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Frame Lock
Clip: PVD stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02-FCLTD -
MKM & Viper - Timavo Flipper by Vox - Green Micarta - VP02-GC - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel and Green Canvas Micarta
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 110g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-GC -
MKM - Arvenis knife - Carbon and Titanium - MK FX01-MCT - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: front of marbled carbon fiber with titanium insert Gr. 5 Ti6AI4V, rear in titanium Gr. 5 Ti6Al4V, all worked in 3D
Blade length: 84mm.
Total length: 203mm.
Blade thickness: 4mm.
Weight: 112g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Knife manufactured by ViperMK-FX01-MCT -
MKM - Clap by Bob Terzuola - titanium and G10 - MKLS01-GTBK - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: black G10 grips and titanium braces
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-GTBK -
MKM - Raut by Burnley - Green G10 - MKVP01-GBGR - knife
Folding knife made by Viper, with BÖHLER M390 MICROCLEAN steel blade, stonewash finish, Fliipper opening system, rotation mechanism with ball bearings. Hybrid locking system, hidden and elegant like a liner lock and at the same time thick and resistant as a frame lock. Titanium spacer and stainless steel screws.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Stonewashed
Handle: G10 and Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 13.3mm.
Weight: 130g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Sub FrameLock
Clip: titanium, removable
Sheath: nylon pouch with zip and belt loops
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by ViperMK-VP01-GBGR -
MKM - Hero Knife by T. Rumici - Titanium and Marbled Carbon Fiber - MK HR-CFT - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-CFT -
MKM - Miura - M390 Button Lock - Titanium Total Black - MI-TDSW - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade Finish: Black PVD Stonewashed
Handle: Titanium Gr. 5 Ti6AI4V Black PVD Stonewashed with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-TDSW -
MKM - Miura - M390 Button Lock - Titanium Bronze - MI-TBR - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-TBR -
MKM - Miura - M390 Button Lock - Titanium Grey - MI-T - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-T -
MKM - Hero by Tommaso Rumici - M390, Titanium and Green Micarta - MK-HR-GCT - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-GCT -
MKM & Mercury - Makro 1 knife Drop by Vox - Naked - MK MA01-N - sports knife
Intended use: Sporty
Type of production: Industrial by Mercury
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: Naked
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 48g.
Sheath: Black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA01-N -
MKM & Mercury - Makro 2 knife Sheepsfoot by Vox - Natural Micarta - MK MA02-NC - sports knife
Intended use: Sporty
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: Natural Micarta
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 66g.
Sheath: Black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA02-NC -
MKM & Mercury - Makro 2 knife Sheepsfoot by Vox - Naked - MK MA02-N - sports knife
Intended use: Sports
Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: Naked
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 50g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA02-N -
MKM & Mercury - Mikro 2 by Vox - Natural Micarta - MK MR02-NC - neck knife
Intended Use: Neck Knife / Sporty
Production type: Industrial by Mercury
Country of Production: Maniago - Italy
Blade: Full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: Micarta
Blade length: 50mm.
Total lenght: 110mm.
Blade thickness: 4mm.
Weight: 40g.
Scabbard: Black leather scabbard, for neck, with magnetic retention button.
Package: Cardboard box with MKM Maniago Knife Makers logos.
Notes: Design by Jesper VoxnaesMK-MR02-NC -
MKM & Mercury - Mikro 2 by Vox - Black G10 - MK MR02-GBK - neck knife
Intended Use: Neck Knife / Sporty
Production type: Industrial by Mercury
Country of Production: Maniago - Italy
Blade: Full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: G10
Blade length: 50mm.
Total lenght: 110mm.
Blade thickness: 4mm.
Weight: 40g.
Scabbard: Black leather scabbard, for neck, with magnetic retention button.
Package: Cardboard box with MKM Maniago Knife Makers logos.
Notes: Design by Jesper VoxnaesMK-MR02-GBK -
MKM & Mercury - Mikro 1by Vox - Green Micarta - MK MR01-GC - neck knife
Intended Use: Neck Knife / Sporty
Production type: Industrial by Mercury
Country of Production: Maniago - Italy
Blade: Full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: Micarta
Blade length: 50mm.
Total lenght: 110mm.
Blade thickness: 4mm.
Weight: 40g.
Scabbard: Black leather scabbard, for neck, with magnetic retention button.
Package: Cardboard box with MKM Maniago Knife Makers logos.
Notes: Design by Jesper VoxnaesMK-MR01-GC -
MKM & Mercury - Mikro 1 by Vox - Black G10 - MK MR01-GBK - neck knife
Intended Use: Neck Knife / Sporty
Production type: Industrial by Mercury
Country of Production: Maniago - Italy
Blade: Full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: G10
Blade length: 50mm.
Total lenght: 110mm.
Blade thickness: 4mm.
Weight: 40g.
Scabbard: Black leather scabbard, for neck, with magnetic retaining button.
Package: Cardboard box with MKM Maniago Knife Makers logos.
Notes: Design by Jesper VoxnaesMK-MR01-GBK -
MKM - Root Knife by Ansø - Black Aluminum - MKRT-A - knife
Intended use: Sportsman / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: Aluminum
Blade length: 70mm.
Blade thickness: 2.5mm.
Closed length: 95mm.
Total length: 165mm.
Thick when closed: 11mm.
Weight: 62g.
Opening: two-handed
Washers: PTFE
Closure: Slip Joint
Clip: absent
Sheath: in leather with belt loop
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Note: -MK-RT-A -
MKM - Flame By Zieba - M390 & Green Micarta - FL02-GCT - Knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Titanium and Canvas Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 59g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02-GCT -
MKM & Mercury - Cellina Slipjoint by Burnley - Titanium and Micarta - MKMY02-GCT - knife
Folding knife made by Mercury, with BÖHLER M390 MICROCLEAN steel blade, satin finish, two-hand opening with eyelet, rotation mechanism with PTFE washers, slip joint system without blade lock, stainless steel screws with ring nut on rotation pin in blue anodized titanium, stainless steel spring.
Intended use: Sportsman / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: Sandblasted titanium and Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 101mm.
Total length: 173mm.
Thick when closed: 11mm.
Weight: 73g.
Opening: two-handed
Washers: PTFE
Closure: Slip Joint
Clip: absent
Sheath: leather with belt loop
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Lucas Burnley - Knife produced by MercuryMKM-MY02-GCT -
MKM & Mercury - Cellina Slipjoint Knife by Burnley - Aluminum - MKMY02-A - knife
Folding knife made by Mercury, with BÖHLER M390 MICROCLEAN steel blade, satin finish, two-hand opening with eyelet, rotation mechanism with PTFE washers, slip joint system without blade lock, stainless steel screws with ring nut on rotation pin in blue anodized titanium, stainless steel spring.
Intended use: Sportsman / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: Aluminum
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 101mm.
Total length: 173mm.
Thick when closed: 11mm.
Weight: 53g.
Opening: two-handed
Washers: PTFE
Closure: Slip Joint
Clip: absent
Sheath: leather with belt loop
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Lucas Burnley - Knife produced by MercuryMKM-MY02-A -
MKM & Viper - Timavo Flipper by Vox - Black G10 - VP02-GBK - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Satin finish
Handle: Stainless steel and G10
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 111g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-GBK -
MKM & Viper - Timavo Flipper by Vox - Blackwashed Titanium - VP02-TDSW - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Blackwash
Handle: Titanium Gr. 5 Ti6AI4V Blackwashed
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium, machined from solid
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-TDSW -
MKM & LionSteel - Colvera Flipper by Vox - G10 Black and Titanium - LS02-GTBK - knife
Colvera is the stream that moves the hammers of the city of Maniago from the fifteenth century. A knife dedicated to the energy of our origins, which combines the sign of a wave with an archaic compact form. - Knife made by LionSteel
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 58 / 60HRC
Blade treatment: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D numerical control processing and G10
Blade length: 76mm.
Blade thickness: 4mm.
Total length: 179mm.
Thick when closed: 12mm.
Weight: 98g.
Closure: Frame Lock with steel leaf
Clip: titanium, machined from solid
Packaging: nylon pouch with zip and cardboard box with MKM logos Maniago Knife Makers
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-LS02-GTBK -
MKM & LionSteel - Colvera Flipper by Vox - Titanium Gray - LS02-T - knife
Colvera is the stream that moves the hammers of the city of Maniago from the fifteenth century. A knife dedicated to the energy of our origins, which combines the sign of a wave with an archaic compact form. - Knife made by LionSteel
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 58 / 60HRC
Blade treatment: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D numerical control machining
Blade length: 76mm.
Blade thickness: 4mm.
Total length: 179mm.
Thick when closed: 12mm.
Weight: 111g.
Closure: Frame Lock with steel leaf
Clip: titanium, machined from solid
Packaging: nylon pouch with zip and cardboard box with MKM logos Maniago Knife Makers
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-LS02-T -
MKM - Arvenis knife - G10 and aluminum - MKFX01-MG-GY - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: black G10 grips
Blade length: 84mm.
Total length: 203mm.
Blade thickness: 4mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Knife manufactured by ViperFX01-MG-GY -
MKM - Clap by Bob Terzuola - olive wood - MK-LS01-O - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: olive wood grips
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 115g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-O -
MKM - Clap by Bob Terzuola - titanium and Santos wood - MKLS01-ST - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: Santos wood grips and titanium plates
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-ST -
MKM - Clap by Bob Terzuola - carbon fiber - MK-LS01-C - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: carbon fiber grips
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 107g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-C -
MKM - Fara by Burnley - Titanium - MKMY01-T - knife
Folding knife made by Mercury, with BÖHLER M390 MICROCLEAN steel blade, satin finish, two-hand opening with fingernail, rotation mechanism with PTFE washers, slip joint system without blade lock, stainless steel screws with ring nut on rotation pin blue anodized titanium, stainless steel spring.
Intended use: Sports / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: Titanium
Blade length: 74mm.
Blade thickness: 2.5mm.
Length closed: 117mm.
Total length: 180mm.
Thick when closed: 11mm.
Weight: 90g.
Opening: two-handed
Washers: in steel
Closure: Joint Slip
Clip: -
Sheath: leather pocket with belt loop
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by MercuryMK-MY01-T -
MKM - Raut by Burnley - carbon fiber - MKVP01-CB - knife
Folding knife made by Viper, with BÖHLER M390 MICROCLEAN steel blade, stonewash finish, Fliipper opening system, rotation mechanism with ball bearings. Hybrid locking system, hidden and elegant like a liner lock and at the same time thick and resistant as a frame lock. Titanium spacer and stainless steel screws.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Stonewashed
Handle: carbon fiber and titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 13.3mm.
Weight: 130g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Sub FrameLock
Clip: titanium, removable
Sheath: nylon pouch with zip and belt loops
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by ViperMKVP01-CB -
MKM - Fara by Burnley - olive wood - MKMY01-O - knife
Folding knife made by Mercury, with BÖHLER M390 MICROCLEAN steel blade, satin finish, two-hand opening with fingernail, rotation mechanism with PTFE washers, slip joint system without blade lock, stainless steel screws with ring nut on rotation pin blue anodized titanium, stainless steel spring.
Intended use: Sports / Gentleman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: Titanium and Olive Wood
Blade length: 74mm.
Blade thickness: 2.5mm.
Length closed: 117mm.
Total length: 180mm.
Thick when closed: 11mm.
Weight: 90g.
Opening: two-handed
Washers: in steel
Closure: Joint Slip
Clip: -
Sheath: leather pocket with belt loop
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by MercuryMK-MY01-O