Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 10 left -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Brian Tighe and Friends - Tighe Fighter Large knife Blackwash Grey Aluminum Flipper - 1100-3BG - knife
Intended use: collection
Type of production: mid tech
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: Blackwash
Handle: Aluminum
Blade length: 94mm.
Blade thickness: 5mm.
Length closed: 130m.
Total length: 226mm.
Thick when closed: 16mm.
Weight: 128g.
Closing: Plunge Lock
Clip: in steel
Notes: numbered series
Packaging: in cardboard with Brian Tighe and Friends logos, Design by Brian Tighe, opening system on IKBS type ball bearings with Carson Flipper type openingBT-1100-3BG -
Brian Tighe and Friends - Tighe Fighter Large Fixed Carbon Fiber - 1104-1 - knife
Destination of use: collection
Type of production: mid tech / semi-custom
Country of production: USA
Blade: 154CM stainless steel
Blade treatment: Satin
Handle: Carbon fiber
Blade length: 124mm.
Blade thickness: 6.3mm.
Total length: 254mm.
Balancing: on the guard branch
Weight: 220g.
Sheath: Kydex
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe
Notes: numbered seriesBT1104-1 -
Brian Tighe and Friends - Tigers Fighter Large knife G10 Flipper - 1100-3 - knife
Destination of use: collection
Type of production: semi-custom
Lama production: USA
Blade: 154CM stainless steel
Lama treatment: Satin
Handle: G10
Blade length: 94mm.
Blade thickness: 5mm.
Length closed: 130m.
Total length: 226mm.
Thick when closed: 16mm.
Balancing: -
Weight: 134g.
Closing: Plunge Lock
Clip: in steel
Notes: numbered series
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe, opening system on ball bearings of type IKBS with Carson Flipper openingBT1100-3 -
Brian Tighe and Friends - Tighe Breaker Small Integral Pinball - 1202-1 - knife
Destination of use: collection
Type of production: semi-custom
Lama production: USA
Blade: CPM S30V stainless steel
Lama treatment: Satin
Handle: titanium
Blade length: 84mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 204mm.
Thick when closed: 12mm.
Balancing: -
Weight: 114g.
Closing: Plunge Lock
Clip: titanium
Notes: numbered series
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe, opening system on ball bearings of type IKBS with Carson Flipper openingBT1202-1 -
Mercury - Logan Orange by Moreno Franzin - knife
Logan is not a common liner, but hides an epic revolution in the constructive concept!
Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.
Purpose: Sportsman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno FranzinME-LOGOR€188.52Out of stock -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
Microtech - DOC Blue Satin - Death on Contact - 153-7BL - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione10838 -
Microtech - DOC Green Stone Washed - Death on Contact - 153-4GR - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione10837 -
Microtech - DOC Black Carbon Fiber - Death on Contact - 153-1T - knife
Microtech DOC Black - Death on Contact - Flipper Knife - Knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Black Coating
Handle: Aluminum 6061T6 Aeronautics and Carbon Fiber
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with logos Microtech
Design: Mick Strider and Anthony MarfioneMCT1531T -
Microtech - Metalmark - Black Serrated Titanium - 170-2
The Metalmark from Microtech has uniquely shaped handles that open to reveal a blade shape that simply flows. The channel handles are 6Al4V titanium, bead blast finished with Torx pivot screw adjustment and a spring loaded latch. The blade is 154-CM steel with a black finish. The build on the Metalmark balisong is solid. Specifications: Overall Length: 9.125" Blade Length: 3.875" Handle Material: 6Al4V Titanium Closed Length: 5.25" Weight: 6.0 oz.10051 -
Microtech - Metalmark - Satin Standard - 170-4
The Metalmark from Microtech has uniquely shaped handles that open to reveal a blade shape that simply flows. The channel handles are aluminum, black anodized with Torx pivot screw adjustment and a spring loaded latch. The blade is Elmax steel with a satin finish. The build on the Metalmark balisong is solid. Specifications: Overall Length: 9.125" Blade Length: 3.875" Blade Steel: Elmax Handle Material: 6061-T6 Aluminum Closed Length: 5.25" Weight: 4.8 oz.10050 -
Microtech - Metalmark - Silver Stonewash Standard - 170-10SI
The Metalmark from Microtech has uniquely shaped handles that open to reveal a blade shape that simply flows. The channel handles are aluminum, black anodized with Torx pivot screw adjustment and a spring loaded latch. The blade is 154-CM steel with a stonewash finish. The build on the Metalmark balisong is solid. Specifications: Overall Length: 9.125" Blade Length: 3.875" Blade Steel: 154-CM Handle Material: 6061-T6 Aluminum Closed Length: 5.25" Weight: 4.8 oz.10049 -
Microtech - Socom Delta - Tanto full Serrated - Black G-10 - 163-12 - coltello
The Microtech Socom Delta knife is the next generation of this classic folder and the winner of the "American Made Knife of the Year" at the 2012 BLADE Show. The Socom Delta features Microtech's titanium sub-lock tab and G10 composite handles, 3D machined with a subtle yet effective texture. The handle has bead blast finished hardware, pocket clip and a titanium back-strap with lanyard hole. Torx T30 pivot adjustment screw. This Socom Delta has a Tanto blade of S35VN steel with a bead blast finish and a partially serrated edge. The blade is deployed with ambidextrous thumb studs. The fit and finish of the Socom Delta Tanto is excellent, just as you'd expect from Microtech. Specifications: Overall Length: 9" Blade Length: 4" Cutting Edge: 3.75" Blade Steel: S35VN Blade Finish: Bead Blast Blade Edge: Partially Serrated Handle Material: Black G10 Closed Length: 5" Weight: 4.6 oz. Made in the USA10043 -
Microtech - Socom Elite - Tanto Plain Satin - Green Alluminum and Carbon Fiber - 161-4GR - coltello
The Socom Elite M/A knife from Microtech has been reintroduced as a 2011 model. This is a manual action liner lock folder. It features a stonewash finished S35-VN stainless steel tanto blade and dual thumb studs. The green anodized 6061-T6 aluminum handle has carbon fiber inserts. The Socom Elite knife includes a glass breaker and tip-down carry pocket clip. This Socom Elite features a free floating lock and ceramic race bearing system! Specifications: Overall Length: 9.2" Blade Length: 4" Closed Length: 5.2" Weight: 4.6 oz.10042 -
Mercury - Combat Black - knife
Mercury - Combat Black - knife
Blade: Integral stainless steel Z50CD15
Total length: 22.5 cm.
Blade length: 12 cm.
Blade thickness: 4 mm.
Handle thickness: 12 mm
Handle Length: 9 cm.
Weight: 160 gr.
Sheath: Black leather2368€72.95Out of stock -
Mercury - Dragon - Knife
Mercury - Dragon - Knife
Integral stainless steel blade Z50CD15
Total length: 22.5 cm.
Blade length: 12 cm.
Blade thickness: 4 mm.Handle thickness: 12 mm
Handle Length: 9 mm
Sheath: Black leatherProduction: Italy
2369€61.48Out of stock -
Microtech - Select Black Fire - Carbon Fiber Inserts - knife
Microtech's Select-Fire is their 2011 offering in the D/A (Dual Action) market. While there are numerous Dual Action offerings among manufacturers, this design won the Most Innovative award at the 2011 Blade Show. This model features a button for automatic deployment of the side opening blade, a large liner lock, oversized thumb stud for manual deployement, index choil for higher grip allowing precision cutting, anti-slip thumb grooves, and a pocket clip. Microtech's Select-Fire comes with a tool to lock the knife's automatic capability rendering it a manual only operating knife.
Dimensions
Blade Steel: Sheath: S35-VN
Blade Length: 3.73 inches
Overall Length: 8.9 inches (approx)
Handle Material: 6061-T6 AL w/ CF inlays
Glassbreaker: Tip-Up
Pocket Clip: Yes5656B -
Microtech - SF M / A Stone Washed - knife
Microtech - SF M / A Stone Washed - knife
Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Blade treatment: Stone Washed
Handle: Aluminium 6061T6 Aviation and Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 140mm.
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 145g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with Microtech logos
Notes: Awarded to Blade Awards 2011 as the most Innovative Design5656S -
Microtech - Socom Elite Black - 160-1 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio CPM-S35VN
Manicatura: Alluminio aueronautico 6061T6 e fibra di carbonio
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5654 -
Microtech - Socom Elite Black Tan - 160-1 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio CPM-S35VN
Manicatura: Alluminio aueronautico 6061T6 e fibra di carbonio
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5654D -
Microtech - Socom Elite Satin Serrated - 160-05 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio inox CPM-20CV
Manicatura: Alluminio aueronautico 6061T6 ed inserti antiscivolo
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5653 -
Microtech - Socom Elite Tan Satin - 160-10 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio inox CPM-20CV
Manicatura: Alluminio aueronautico 6061T6 ed inserti antiscivolo
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5653D