Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Intended Use: sports

Type of production: industrial
Production Blade: taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 150mm.
Blade Thickness: 4mm.
Length closed: 183mm.
Total length: 330mm.
Balance: -
Weight: 206g.
Lock: Liner Lock
Clip: removable stainless steel
Sheath: -
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available Discontinued since 2003
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, some signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: Yes
* Checked and certified by our internal laboratory

Intended use: Sporting

Type of production: industrial
Blade: ATS-55 stainless steel
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 50mm.
Blade thickness: 1.9mm.
Length closed: 70mm.
Total length: 118mm.
Weight: 36g.
Closure: Liner Lock
Clip: Removable, stainless steel
Notes: Version remained in production from approximately 1997 to 2003 - example withdrawn from a private collection, overall in very good condition.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

SERIAL NUMBER 0231

* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Limited series, discontinued
* Sharpening: Factory
* Marks on blade: Slight, uneven treatment in places (factory, not due to wear)
* Marks on handle: No
* Box: Present and original, WITH AUTOGRAPH SIGNATURE OF LYNN THOMPSON
* Scabbard: Not present
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratory

Intended use: Sporting/EDC

Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel Carpenter CTS XHP Alloy 59/60HRC
Blade treatment: DLC
Handle: Griv-Ex
Blade length: 135mm.
Blade thickness: 3.6mm.
Length closed: 170mm.
Total length: 304mm.
Weight: 208g.
Closure: Back Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition (serial no. 0231) with signature of "Lynn C. Thompson" laser engraved on the blade and in pen on the packaging

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratory

Intended use: Sporting / Utility

Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -

For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.

The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle. 

The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.

The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.

Intended Use: Sporting/EDC

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN 59/60HRC
Blade Treatment: Satin finish
Handle: Aluminum T6061 mirror polished with G10 inserts
Blade length: 89mm.
Blade thickness: 3.8mm.
Length closed: 120mm.
Total length: 209mm.
Weight: 125g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: Stainless steel, removable
Package: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition of only 3500 pieces with signature of "Lynn C. Thompson" laser engraved on the blade and pencilled on the product packaging.

FROM COLD STEEL WEBSITE

The Oyabun Limited is a high-end collector's version of our Oyabun. It shares features in common with the standard model in terms of functionality and appearance, but differs greatly in the materials used in its construction. It also has the value of being a collectible keepsake as only 3500 were produced. Each one is serially numbered and each box will be personally signed by Lynn C. Thompson himself! The blade's fine S35VN steel is an expensive powder coated steel that is heat treated to Rc 59-60 and hardened to sub zero. It has been given an attractive two-tone finish on the blade planes and a high satin polish on the blade bevels. Notably, the handle frame is milled from two solid billets of 6061 aluminum to create the bolster and pommel, which has been given a beautiful mirror polished finish. The handle also features CNC-machined G-10 plates with a diamond checkerboard pattern for a good, secure grip.

"I like flashy knives and when they are limited collector's editions with serial numbers made from high quality materials, I like them even more. That's why I think you'll like our Oyabun Limited. Only 3500 pieces will be made. All individually serial numbered with 6061 aluminum frames, CNC machined handles that are completely checkered just like my much original and a two-tone polished S35VN blade! And best of all, all this splendor and high performance is backed by our state-of-the-art leaf spring lock and secondary safety, so you know it won't bend on your hand. Now you have a knife that is worth every penny asked (just compare) and has tremendous appeal/appreciation from collectors!!!" - Lynn Thompson

Intended Use: Collection / Tactical

Production Type: Industrial
Country of Production: USA
Blade: Carbon steel CPM-M4
Blade Finish: Black DLC
Handle: Natural G-10
Blade Length: 102mm.
Blade thickness: 3.3mm.
Length closed 140mm.
Total lenght: 241mm.
Thickness when closed: 15mm.
Weight: 122g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: limited edition made in February 2019 exclusively for a US retailer - discontinued, sold out and unobtainable - Direct link to manufacturer's datasheet: https://www.spyderco.com/catalog/details/C36GM4BK/1210 

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Teflon coating
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 16mm.
Weight: 105g.
Closure: Liner Lock
Clip: Removable, multi-position, Teflon coated stainless steel
Packaging: cardboard box with Spyderco logos
Note: -

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Taiwan
Blade: 4033 stainless steel
Blade treatment: Satin finish
Handle: Zy-Ex
Blade length: 92mm.
Blade thickness: 3.3mm.
Length closed: 122mm.
Total length: 212mm.
Thick when closed: 14mm.
Weight: 120g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: stainless steel, removable
Packaging: cardboard box with Cold Steel logos
Notes: opening system by carson flipper system - Design by Wes Crawford

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: CTS-BD1 stainless steel
Blade treatment: Satin
Handle: FRN Fiberglass Reinforced Nylon with stainless steel liner
Blade length: 33mm.
Blade thickness: 3mm.
Length closed: 57mm.
Total length: 90mm.
Thick when closed: 6.8mm
Weight: 34g.
Closure: Liner Lock
Clip: -
Packaging: Cardboard box with Spyderco logos
Notes: Design by Darriel Caston

Logan is not a common liner, but hides an epic revolution in the constructive concept!

Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.

Purpose: Sportsman / EDC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno Franzin

Intended use: Sports

Type of production: Industrial
Production Country: China
Blade: CTS-BD1 stainless steel
Blade treatment: Satin finish
Handle: Stainless steel and G-10
Blade length: 84mm.
Blade thickness: 3.2mm.
Closed Length: 115mm.
Overall length: 198mm.
Thick when closed: 16mm.
Weight: 111g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended use: Tactical / EDC

Type of production: Industrial
Production Country: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: Carbon fiber and laminate titanium liners with G10 and G10 in orange spacer
Blade length: 77mm.
Blade thickness: 3.5mm.
Closed Length: 111mm.
Overall length: 188mm.
Thick when closed: 13mm.
Weight: 116g.
Lock: Liner Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Peter Carey - opening via Carson Flipper system on ball bearings

Intended use: Sport

Type of production: Industrial
Production Lama: China
Blade: 8Cr13MoV stainless steel
Treatment Blade: Teflon
Handle: Stainless steel and G-10
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Total length: 195mm.
Thick when closed: 16mm.
Balance: -
Weight: 116g.
Lock: Liner Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: U.S.A.
Blade: stainless steel CPM S110V
Handle: G10
Blade length: 102mm.
Blade thickness: 3.7mm.
Length closed 140mm.
Overall length: 242mm.
Thick when closed: 15mm.
Weight: 122g.
Lock: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with stainless steel liners drowned
Blade length: 77mm.
Blade thickness: 3mm.
Closed Length: 101mm.
Overall length: 178mm.
Thick when closed: 13mm.
Weight: 74g.
Lock: Liner Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Brad Southard - Opening on ball bearings - opening via Carson Flipper system

Intended use: Sport / Collection

Type of production: Industrial
Country of production: Japan
Blade: Stainless Steel VG-10
Blade treatment: beaded blast
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Length closed: 119mm.
Overall length: 197mm.
Weight: 133g.
Locking system: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Design by Serge Panchenko

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama: Taiwan
Blade: Stainless steel CPM-S30V Steel Powder
Treatment Lama: -
Handle: Brass and Carbon Fiber
Blade length: 94mm.
Blade thickness: 2.5mm.
Closed Length: 120mm.
Overall length: 215mm.
Thick when closed: -
Balancing: -
Weight: 130g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: Design by Ed Schempp

Spyderco - Matriarch 2 - C12SBK2 - knife

Intended Use: EDC / Sports / Collection

Type of production: Industrial
Production Lama: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: FRN Black
Blade length: 90mm.
Blade thickness: 2mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 98g.
Closure: Back Lock
Clips: stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: -

Intended Use: Sport / Outdoor

Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: Black G-10
Blade length: 86mm.
Blade thickness: 3mm.
Closed Length: 106mm.
Overall length: 192mm.
Thick when closed: -
Balancing: -
Weight: 96g.
Lock: Liner Lock
Clip: Multiposition and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Bob Terzuola

Destinazione d'uso: Sportivo

Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: G10
Lunghezza lama: 87mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: 117mm.
Lunghezza totale: 207mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 142g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: Design by Pekka Tuominen

Destinazione d'uso: Sportivo

Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: In acciaio inox VG-10
Trattamento Lama: -
Manicatura: G10
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: 128mm.
Lunghezza totale: 217mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 123g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: Design by Bob Lum

Spyderco - Lil Matriarch knife - C162SBK - knife

Intended use: EDC / Sports
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Thick when closed: -
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
package:
Cardboard box with logos Spyderco
Notes: -

Spyderco - Air by Gayle Bradley - C159GF - knife

Intended use: EDC / Sports
Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless Steel CPM-M4
Treatment Lama: -
Handle: Titanium and Glass Fiber
Blade length: 65mm.
Blade thickness: 2.3mm.
Closed Length: 87mm.
Total length: 151mm.
Thick when closed: -
Balance: -
Weight: 37g.
Lock: Liner
Lock Clip: -
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Gayle Bradley

Spyderco - Memory Centofante Pin - C155TIP - knife

Intended Use: Sport / Collection
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10 Treatment
Blade: -
Handle: Titanium and Glass Fiber
Blade length: 77mm.
Blade thickness: 2.5mm.
Closed Length: 103mm.
Total length: 207mm.
Thick when closed: -
Balance: -
Weight: 88g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Jewel case with leatherette zip
Notes: a tribute to the late Frank Centofante

Spyderco - Starmate by Bob Terzuola - C55G - knife

Intended Use: Sports / Outdoors

Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: G-10 Black
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 126mm.
Total length: 221mm.
Thick when closed: -
Balance: -
Weight: 139g.
Lock: Liner Lock
Clip: Multiposition and removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Bob Terzuola

Intended use: Sport

Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: Tiger Stripe
Handle: Fiberglass
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Total length: 283mm.
Thick when closed: -
Balance: -
Weight: 86g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: Design by Bob Lum

Purpose: Sportsman / Collectibles

Type of production: Industrial
Country of Origin: Taiwan
Blade: Steel CPM-M4
Blade Treatment: Satin
Handle: Carbon Fiber and Rolled G10
Blade Length: 87mm.
Blade thickness: 3mm.
Closed length: 118mm.
Total length: 205mm.
Closed thickness: 13mm.
Weight: 144g.
Closure: Liner Lock
Clip: Stainless Steel
Packing: Carton box with Spyderco logos
Notes: Design by Gayle Bradley

Spyderco - Jens Anso Zulu - C145GP knife

Intended Use: Sport / Collection

Type of production: Industrial
Production Blade: Taiwan
Blade: stainless steel CPM-S30V
Treatment Lama: -
Handle: G-10
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: -
Total length: 175mm.
Thick when closed: 14mm.
Balance: -
Weight: 100g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Jens Anso

Intended Use: Sports

Type of production: Industrial
Blade production: China
Blade: Stainless steel 8Cr13MoV
Blade Treatment: -
Handle: Stainless steel and G-10
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 16mm.
Balance: -
Weight: 116g.
Closure: Liner Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -