Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Pattada - N690Co & G10 - PRIVATE COLLECTION - C204GP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionType of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC204GP-CP -
Spyderco - Lil' Matriarch - Serrated Black FRN - PRIVATE COLLECTION - C162SBK - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, packaging slightly damaged
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: EDC / RescueProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 70g.
Closure: Back Lock
Clip: stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -C126SBK-CP -
MKM - Isonzo Clip Point by Vox - M390 & Marble Carbon Fiber - FX03M-3CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-3CM -
MKM - Isonzo Hawkbill by Vox - M390 & Marble Carbon Fiber - FX03M-1CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-1CM -
MKM - Isonzo Cleaver by Vox - M390 & Marble Carbon Fiber - FX03M-2CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-2CM -
MKM - Vincent by Vox - Top Shield N690Co & Black G10 - VCN-GBB - knife
The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is BOHLER N690Co with black Black Top Shield cover and G10 handle for the best possible grip.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: G10, with embedded stainless steel liners and anodized aluminum spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 100g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX VoxnaesMK-VCN-GBB -
MKM - Flame Light by Zieba - M390 & Green Micarta - FL02L-GC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-GC -
MKM - Flame Light by Zieba - M390 & Black Micarta - FL02L-BC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-BC -
MKM - Goccia Flipper by Jens Anso - Dark Stonewashed Titanium - MK-GC-TDSW - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, Water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade Treatment: Dark Stonewashed
Handle: Dark Stonewashed Titanium with anodized titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 135g.
Closure: LinerLock
Clip: anodized titanium, deep pocket, removable
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-TDSW -
MKM - Goccia Flipper by Jens Anso - Bronze Titanium - MK-GC-TBR - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, the water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: satin finish
Handle: Bronze anodized titanium with stonewashed titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 135g.
Closure: LinerLock
Clip: stonewashed titanium, deep pocket, removable
Scabbard: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-TBR -
MKM - Goccia Flipper by Jens Anso - Black G10 - MK-GC-GBK - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, the water, which in 1453 moved the hammers to forge the first blades and that has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: satin finish
Handle: G10, with stainless steel embedded liners and anodized titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total lenght: 200mm.
Thickness when closed: 15mm
Weight: 110g.
Closure: LinerLock
Clip: anodized titanium, deep pocket, removable
Sheath: Nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-GBK -
MKM - Goccia Flipper by Jens Anso - Green Canvas Micarta - MK-GC-GC - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, Water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: Satin finish
Handle: Micarta, with stainless steel embedded liners and titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 110g.
Closure: LinerLock
Clip: Titanium, deep pocket, removable
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-GC -
MKM & Fox - Isonzo Clip Green by Vox - MK-FX03-3PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: N690Co 59 / 60HRC stainless steel
Blade treatment: Black Idroglider
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PGO -
MKM & Fox - Isonzo Clip Gray by Vox - MK-FX03-3PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690Co 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PGY -
MKM & Fox - Isonzo Cleaver Green by Vox - MK-FX03-2PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Black Idroglider
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PGO -
MKM & Fox - Isonzo Cleaver Gray by Vox - MK-FX03-2PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PGY -
MKM & Fox - Isonzo Hawkbill Gray by Vox - MK-FX03-1PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports / TacticalType of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PGY -
MKM & Fox - Isonzo Hawkbill Green by Vox - MK-FX03-1PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports / TacticalType of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Black
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PGO -
Spyderco - Emphasis - C245GP - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 91mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 211mm.
Weight: 147g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C245GP -
Spyderco - Insistent - C246GP - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 63mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 155mm.
Weight: 113g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C246GP -
MKM & Viper - Timavo Flipper by Vox - Green Micarta - VP02-GC - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel and Green Canvas Micarta
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 110g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-GC -
MKM - Isonzo Cleaver knife black by Vox - MK-FX03-2PBK - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PBK -
MKM - Isonzo Hawkbill knife black by Vox - MK-FX03-1PBK - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Black
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PBK -
MKM - Isonzo black clip point knife by Vox - MK-FX03-3PBK - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PBK -
MKM - Isonzo blue clip point knife by Vox - MK-FX03-3PBL - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PBL -
MKM - Clap by Bob Terzuola - titanium and G10 - MKLS01-GTBK - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: black G10 grips and titanium braces
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-GTBK -
Spyderco - Alcyone - C222GPGY - knife
Purpose of use: Sport
Type of production: Industrial
Country of production: China
Blade: stainless steel CTS-BD1
Blade Treatment: Satin
Handle: Stainless Steel and G-10
Blade Length: 74mm.
Blade thickness: 3mm.
Closed length: 105mm.
Overall length: 179mm.
Closed thickness: 16mm.
Weight: 93g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packing: cardboard box with Spyderco logos
Notes: -C222GPGY -
Spyderco - Efficient - C216G - knife
Intended use: Sports
Type of production: Industrial
Production Country: China
Blade: 8Cr13MoV Stainless Steel
Blade treatment: Satin finish
Handle: Stainless steel and G-10
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 104mm.
Overall length: 180mm.
Thick when closed: 16mm.
Balancing: -
Weight: 116g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -C216G -
Spyderco - Cat SC129GP - knife
Spyderco - Cat SC129GP - knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: Taiwan
Blade: stainless steel 440C
Treatment Lama: -
Handle: G10
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed Length: 90mm.
Overall length: 150mm.
Thick when closed: 9mm.
Balancing: -
Weight: 72g.
Lock: Liner Lock
Clip: yes
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -SC129GP -
Spyderco - Resilience - C142GP - knife
Intended use: Sport
Type of production: Industrial
Production Lama: China
Blade: 8Cr13MoV stainless steel
Treatment Blade: -
Handle: Stainless steel and G-10
Blade length: 108mm.
Blade thickness: 3mm.
Closed Length: 133mm.
Overall length: 238mm.
Thick when closed: 16mm.
Balancing: -
Weight: 154g.
Lock: Liner Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -C142GP -
Spyderco - Cat - Satin 440C & Schwarz G10 - SC129GP - PRIVATSAMMLUNG - Messer
MESSER AUS PRIVATER SAMMLUNG ENTNOMMEN
* Typ: Zuvor gekauft
* Zustand: Gebraucht, in gutem Zustand
* Kommerziell verfügbar: Erhältlich, aber mit verschiedenen Stählen
* Schärfung: Werkseitig geschärft
* Marks on blade: Keine
* Marks on handle: Some small signs of wear on G10
* Box: Vorhanden, aber leicht beschädigt
* Scheide: /
* Handbücher, Zertifikate und Garantien: /
* Geprüft und zertifiziert durch unser hauseigenes Labor
Verwendungszweck: Sporting/EDCProduktionsart: Industriell
Land der Herstellung: Taiwan
Klinge: 440C rostfreier Stahl
Klingenfinish: Satinierte Oberfläche
Griff: G10
Klingenlänge: 60mm.
Dicke der Klinge: 2,5 mm.
Länge geschlossen: 90mm.
Gesamtlänge: 150mm.
Dicke im geschlossenen Zustand: 9mm.
Gewicht: 72g.
Verschluss: Liner Lock
Clip: Abnehmbar und umkehrbar aus Edelstahl
Verpackung: Pappschachtel mit Spyderco-LogosSC129GP-CP -
Spyderco - Ambitious - C148GP - knife
Intended use: Sporting/EDC
Production type: Industrial
Blade production: China
Blade: Stainless steel 8Cr13Mov
Blade treatment: -
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 150mm.
Thickness when closed: 11mm.
Balance: -
Weight: 86g.
Closure: Liner Lock
Clip: Stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -C148GP -
Spyderco - Military Black Plain - C36GPBK - knife
Intended Use: Sporting/Tactical
Production type: Industrial
Blade production: U.S.A.
Blade: Stainless steel CPM 30SV
Blade Treatment: BodyCote black
Handle: G10
Blade length: 102mm.
Blade thickness: 3.3mm.
Length closed 140mm.
Total length: 241mm.
Thickness when closed: 15mm.
Balance: -
Weight: 122g.
Closure: Liner Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: cardboard box with Spyderco logos
Notes: -C36GPBK -
Spyderco - Military Plain knife - C36GPE knife
Intended use: Sport / Tactical
Type of production: Industrial
Blade Production: U.S.A.
Blade: CPM 30SV stainless steel
Blade treatment: -
Handle: G10
Blade length: 102mm.
Blade thickness: 3.3mm.
Closed length 140mm.
Total length: 241mm.
Closed thickness: 15mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: removable, in stainless steel
Scabbard: -
Packaging: cardboard box with Spyderco logos
Note: -3720PS -
Spyderco - Cricket Knife - C29BK - ATS-55 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available Discontinued since 2003
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, some signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: Yes
* Checked and certified by our internal laboratoryIntended use: Sporting
Type of production: industrial
Blade: ATS-55 stainless steel
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 50mm.
Blade thickness: 1.9mm.
Length closed: 70mm.
Total length: 118mm.
Weight: 36g.
Closure: Liner Lock
Clip: Removable, stainless steel
Notes: Version remained in production from approximately 1997 to 2003 - example withdrawn from a private collection, overall in very good condition.AP-C29BK -
Spyderco - Military - Natural G-10 & CPM-M4 Black DLC - Exclusive Edition - C36GM4BK - Knife
Intended Use: Collection / Tactical
Production Type: Industrial
Country of Production: USA
Blade: Carbon steel CPM-M4
Blade Finish: Black DLC
Handle: Natural G-10
Blade Length: 102mm.
Blade thickness: 3.3mm.
Length closed 140mm.
Total lenght: 241mm.
Thickness when closed: 15mm.
Weight: 122g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: limited edition made in February 2019 exclusively for a US retailer - discontinued, sold out and unobtainable - Direct link to manufacturer's datasheet: https://www.spyderco.com/catalog/details/C36GM4BK/1210C36GM4BK -
Spyderco - Tenacious Lightweight - Black Plain - C122PBBK - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Teflon coating
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 16mm.
Weight: 105g.
Closure: Liner Lock
Clip: Removable, multi-position, Teflon coated stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C122PBBK -
MKM & Viper - Timavo Flipper by Vox - Black G10 - VP02-GBK - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Satin finish
Handle: Stainless steel and G10
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 111g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-GBK -
MKM & Viper - Timavo Flipper by Vox - Blackwashed Titanium - VP02-TDSW - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Blackwash
Handle: Titanium Gr. 5 Ti6AI4V Blackwashed
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium, machined from solid
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-TDSW -
MKM - Arvenis knife - G10 and aluminum - MKFX01-MG-GY - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: black G10 grips
Blade length: 84mm.
Total length: 203mm.
Blade thickness: 4mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Knife manufactured by ViperFX01-MG-GY -
MKM - Clap by Bob Terzuola - olive wood - MK-LS01-O - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: olive wood grips
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 115g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-O -
MKM - Clap by Bob Terzuola - titanium and Santos wood - MKLS01-ST - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: Santos wood grips and titanium plates
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-ST -
MKM - Clap by Bob Terzuola - carbon fiber - MK-LS01-C - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: carbon fiber grips
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 107g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-C -
Spyderco - Squarehead Lightweight Black - C193PBK - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: CTS-BD1 stainless steel
Blade treatment: Satin
Handle: FRN Fiberglass Reinforced Nylon with stainless steel liner
Blade length: 33mm.
Blade thickness: 3mm.
Length closed: 57mm.
Total length: 90mm.
Thick when closed: 6.8mm
Weight: 34g.
Closure: Liner Lock
Clip: -
Packaging: Cardboard box with Spyderco logos
Notes: Design by Darriel CastonC193PBK -
Mercury - Logan Orange by Moreno Franzin - knife
Logan is not a common liner, but hides an epic revolution in the constructive concept!
Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.
Purpose: Sportsman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno FranzinME-LOGOR€188.52Out of stock -
Spyderco - Polestar - C220GGY - knife
Intended use: Sports
Type of production: Industrial
Production Country: China
Blade: CTS-BD1 stainless steel
Blade treatment: Satin finish
Handle: Stainless steel and G-10
Blade length: 84mm.
Blade thickness: 3.2mm.
Closed Length: 115mm.
Overall length: 198mm.
Thick when closed: 16mm.
Weight: 111g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -C220GGY -
Spyderco - Rubicon 2 by Peter Carey - C187CFP2 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Country: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: Carbon fiber and laminate titanium liners with G10 and G10 in orange spacer
Blade length: 77mm.
Blade thickness: 3.5mm.
Closed Length: 111mm.
Overall length: 188mm.
Thick when closed: 13mm.
Weight: 116g.
Lock: Liner Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Peter Carey - opening via Carson Flipper system on ball bearingsC187CFP2 -
Spyderco - Tenacious - Green Black - C122GPBGR - knife
Intended use: Sport
Type of production: Industrial
Production Lama: China
Blade: 8Cr13MoV stainless steel
Treatment Blade: Teflon
Handle: Stainless steel and G-10
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Total length: 195mm.
Thick when closed: 16mm.
Balance: -
Weight: 116g.
Lock: Liner Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -C122GPBGR -
Spyderco - Military - Dark Blue CPM-S110V - C36GDBL - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of Origin: U.S.A.
Blade: stainless steel CPM S110V
Handle: G10
Blade length: 102mm.
Blade thickness: 3.7mm.
Length closed 140mm.
Overall length: 242mm.
Thick when closed: 15mm.
Weight: 122g.
Lock: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos12639 -
Spyderco - Positron by Brad Southard - C195CFP - knife
Intended use: Sports / Collection
Type of production: Industrial
Production Country: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Stonewashed
Handle: Carbon fiber with stainless steel liners drowned
Blade length: 77mm.
Blade thickness: 3mm.
Closed Length: 101mm.
Overall length: 178mm.
Thick when closed: 13mm.
Weight: 74g.
Lock: Liner Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Brad Southard - Opening on ball bearings - opening via Carson Flipper systemC195CFP -
Spyderco - Panchenko Roc Cleaver - C177GP - knife
Intended use: Sport / Collection
Type of production: Industrial
Country of production: Japan
Blade: Stainless Steel VG-10
Blade treatment: beaded blast
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Length closed: 119mm.
Overall length: 197mm.
Weight: 133g.
Locking system: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Design by Serge Panchenko12414 -
Spyderco - Schempp Bowie - C190CFP - knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Lama: Taiwan
Blade: Stainless steel CPM-S30V Steel Powder
Treatment Lama: -
Handle: Brass and Carbon Fiber
Blade length: 94mm.
Blade thickness: 2.5mm.
Closed Length: 120mm.
Overall length: 215mm.
Thick when closed: -
Balancing: -
Weight: 130g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: Design by Ed Schempp12287 -
Spyderco - Matriarch 2 - C12SBK2 - knife
Spyderco - Matriarch 2 - C12SBK2 - knife
Intended Use: EDC / Sports / Collection
Type of production: Industrial
Production Lama: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: FRN Black
Blade length: 90mm.
Blade thickness: 2mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 98g.
Closure: Back Lock
Clips: stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: -C12SBK2 -
Spyderco - Double Bevel by Bob Terzuola - C174GP - Knife
Intended Use: Sport / Outdoor
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: Black G-10
Blade length: 86mm.
Blade thickness: 3mm.
Closed Length: 106mm.
Overall length: 192mm.
Thick when closed: -
Balancing: -
Weight: 96g.
Lock: Liner Lock
Clip: Multiposition and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Bob Terzuola10871 -
Spyderco - Shempp Navaja - C147CFP - knife
First noted in 15th century Spain among Gypsies and Gitanos, the Navaja folding knife was used for work, utility and protection. They're shaped similarly to barbering razors or novacula, meaning razor in Spanish. Modern definition categorizes it as a modified clip-point with an unsharpened concave spine swedge. Unique to the Navaja is the Carraca or ratcheting sound produced when opening or closing the blade. It announces the knife's presence and is believed to raise anxiety and anticipation, deterring criminals. Ed Schempp's modernized Navaja has a carbon fiber handle, stainless steel bolsters, pocket clip and the Carraca (ratcheting sound), maintaining the mystique of the Navaja.
Features- 4-way Clip: Tip up/down, left/right hand
- Michael Walker LinerLock
- Spine & choil jimping
- Screw-together construction
- Full-length skeletonized internal liners
- Flat-ground blade
- Carbon fiber scales with bolster
Specifications- Blade Length: 3-7/8" (98 mm)
- Cutting Edge: 3-5/32" (80 mm)
- Closed Length: 4-3/4" (121 mm)
- Overall Length: 8-5/8" (219 mm)
- Steel: CPM-S30V Premium Stainless Steel
- Weight: 4.75 oz. (135 g)
- Edge: Plain
- Made in Taiwan
C147 -
Spyderco - Nilakka Folding Puukko by Pekka Tuominen - C164GBN
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: G10
Lunghezza lama: 87mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: 117mm.
Lunghezza totale: 207mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 142g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: Design by Pekka Tuominen10035 -
Spyderco - Bob Lum Large Chinese Folder - C143G coltello
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: In acciaio inox VG-10
Trattamento Lama: -
Manicatura: G10
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: 128mm.
Lunghezza totale: 217mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 123g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: Design by Bob Lum10034 -
Spyderco - Lil Matriarch coltello - C162SBK - coltello
Spyderco - Lil Matriarch knife - C162SBK - knife
Intended use: EDC / Sports
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Thick when closed: -
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
package:
Cardboard box with logos Spyderco
Notes: -11000 -
Spyderco - Air by Gayle Bradley - C159GF - knife
Spyderco - Air by Gayle Bradley - C159GF - knife
Intended use: EDC / Sports
Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless Steel CPM-M4
Treatment Lama: -
Handle: Titanium and Glass Fiber
Blade length: 65mm.
Blade thickness: 2.3mm.
Closed Length: 87mm.
Total length: 151mm.
Thick when closed: -
Balance: -
Weight: 37g.
Lock: Liner
Lock Clip: -
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Gayle Bradley10005 -
Spyderco - Memory Centofante Pin - C155TIP - knife
Spyderco - Memory Centofante Pin - C155TIP - knife
Intended Use: Sport / Collection
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10 Treatment
Blade: -
Handle: Titanium and Glass Fiber
Blade length: 77mm.
Blade thickness: 2.5mm.
Closed Length: 103mm.
Total length: 207mm.
Thick when closed: -
Balance: -
Weight: 88g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Jewel case with leatherette zip
Notes: a tribute to the late Frank Centofante3809 -
Spyderco - Starmate by Bob Terzuola - C55G - knife
Spyderco - Starmate by Bob Terzuola - C55G - knife
Intended Use: Sports / Outdoors
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: G-10 Black
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 126mm.
Total length: 221mm.
Thick when closed: -
Balance: -
Weight: 139g.
Lock: Liner Lock
Clip: Multiposition and removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Bob Terzuola3815 -
Spyderco - Barong by Ed Schempp - C124GPFG - coltello
Destinazione d'uso: sportivo/tattico
Tipo di produzione: industriale
Produzione Lama: Giappone
Lama: in acciaio inox VG-10
Manicatura: G10
Lunghezza lama: 100mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 125
Lunghezza totale: 225mm.
Bilanciatura: -
Peso: 120g.
Chiusura: liner Lock
Clip: in acciaio inox, amovibile e reversibile
Note: disegnato da Ed Schempp3735 -
Spyderco - Bob Lum Chinese Folder Glass Fiber Handle - C65CF
Intended use: Sport
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: Tiger Stripe
Handle: Fiberglass
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Total length: 283mm.
Thick when closed: -
Balance: -
Weight: 86g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: Design by Bob Lum3753 -
Spyderco - Breeden Rescue Pin - C139GP coltello
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: G-10
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 113mm.
Lunghezza totale: 200mm.
Bilanciatura: -
Peso: 126g.
Chiusura: Liner Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: design by Jason Breeden3760 -
Spyderco - Des Horn - C153GP - coltello
Destinazione d'uso: Sportivo / Collezione
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: G-10
Lunghezza lama: 79mm.
Spessore lama: 3mm.
Lunghezza chiuso: 105mm.
Lunghezza totale: 183mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 56g.
Chiusura: Liner Lock
Clip: Amovibile, in acciaio inox
Fodero: -
Confezione: Scatola di cartone con loghi Spyderco
Note: Design by Des Horn3798 -
Spyderco - Gayle Bradley Carbon Fiber - C134CFP - knife
Purpose: Sportsman / Collectibles
Type of production: Industrial
Country of Origin: Taiwan
Blade: Steel CPM-M4
Blade Treatment: Satin
Handle: Carbon Fiber and Rolled G10
Blade Length: 87mm.
Blade thickness: 3mm.
Closed length: 118mm.
Total length: 205mm.
Closed thickness: 13mm.
Weight: 144g.
Closure: Liner Lock
Clip: Stainless Steel
Packing: Carton box with Spyderco logos
Notes: Design by Gayle Bradley3754 -
Spyderco - Jens Anso Zulu - C145GP knife
Spyderco - Jens Anso Zulu - C145GP knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Blade: Taiwan
Blade: stainless steel CPM-S30V
Treatment Lama: -
Handle: G-10
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: -
Total length: 175mm.
Thick when closed: 14mm.
Balance: -
Weight: 100g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Jens Anso3756 -
Spyderco - Kuhkri by Ed Schempp - coltello
Destinazione d'uso: sportivo/tattico
Tipo di produzione: industriale
Produzione Lama: Giappone
Lama: in acciaio inox VG-10
Manicatura: G10
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 110
Lunghezza totale: 195mm.
Bilanciatura: -
Peso: 92g.
Chiusura: liner Lock
Clip: in acciaio inox, amovibile e reversibile
Note: disegnato da Ed Schempp3728 -
Spyderco - Military Black Serrated - C36GPSBK coltello
Destinazione d'uso: Sportivo/Tattico
Tipo di produzione: Industriale
Produzione Lama: U.S.A.
Lama: in acciaio inox CPM 30SV
Trattamento Lama: BodyCote nero
Manicatura: G10
Lunghezza lama: 102mm.
Spessore lama: 3.3mm.
Lunghezza chiuso 140mm.
Lunghezza totale: 241mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 122g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: -3720S -
Spyderco - Military Camo Plain - SC36GPCM coltello
Destinazione d'uso: Sportivo/Tattico
Tipo di produzione: Industriale
Produzione Lama: U.S.A.
Lama: in acciaio inox CPM 30SV
Manicatura: G10 camo
Lunghezza lama: 102mm.
Spessore lama: 3.3mm.
Lunghezza chiuso 140mm.
Lunghezza totale: 241mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 122g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: -3794 -
Spyderco - Rock Lobster - C126GPFG coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: In acciaio inox VG-10 58HRC
Trattamento Lama: -
Manicatura: G-10 con liners interni in acciaio inox
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: 124mm.
Lunghezza totale: 215mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 30g.
Chiusura: Liner Lock
Clip: amovibile e reversibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: Design by Jens Anso3738 -
Spyderco - Sage 1 Knife - Carbon Fiber - C123CFP coltello
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox CPM S30V
Trattamento Lama:
Manicatura: fibra di carbonio
Lunghezza lama: 77mm.
Spessore lama: 2.7mm.
Lunghezza chiuso 114mm.
Lunghezza totale: 181mm.
Spessore da chiuso: 17mm.
Bilanciatura: -
Peso: 92g.
Chiusura: Liner Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: -3717