Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Destinazione d'uso: Neck Knife

Tipo di produzione: Industriale
Paese di produzione: Maniago, Italia, by Fox Cutlery
Lama: acciaio inox N690Co
Trattamento lama: Black Cerakote
Impugnatura: acciaio inox N690Co
Lunghezza lama: 40mm.
Spessore lama: 3.8mm.
Lunghezza totale: 138mm.
Peso: 30g.
Fodero: Da collo, in Kydex, compatibile con sistemi di aggancio UltiClip (non compresi, acquistabili separatamente)
Confezione: Scatola di cartone con loghi Bastinelli Knives
Note: Prodotto in Italia da Fox Cutlery

Blade: Full tang carbon steel
Conformation: Dui Chirra
Kauri: covered
Aunlo-Bal: -
Handle: wood
Blade length: 310mm.
Blade thickness: 6.5mm.
Total length: 435mm.
Karda: -
Chakmak: -
Weight: 760g.
Sheath: in wood and leather
Notes: Original Nepalese knife entirely handmade

Intended use: Tactical

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 66mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 184mm.
Closed thickness: 15mm.
Weight: 102g.
Opening: Emerson Wave type system
Washers: Brass
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Packing: Cardboard box with Bastinelli Knives logos
Notes: Doug Marcaida and Funker Tactical - Produced by Fox FKMD

Natural stone for sharpening, oil, type Arkansas Translucent Ultrafine

Made in USA, Made of Novaculite of the highest quality and cleverly cut at the artisan level, it guarantees very high performances both in sharpening and polishing. Contained in a practical wooden box, it is not fastened or glued and is inserted into a comfortable silicone non-slip support.

Ideal for rewinding of free razors or for cleaning blades.

Dimensions: 15 x 5 x 1.17 cm.
Quality level: Very high

Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood
Finishes: Brass
Blade length: 250 mm.
Blade thickness: 10 mm.
Total length: 380 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 468g. (602g with scabbard)
Sheath: in leather and wood
Notes: Original Nepalese knife entirely handmade

Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.

Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmade

THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.

Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.

THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mm

Type: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber support

THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.

Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.

THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mm

Type: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber support

THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.

Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.

THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mm

Type: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber support

THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.

Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.

THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mm

Type: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber support

THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.

Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.

THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mm

Type: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber support

THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.

Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.

THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mm

Type: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber support

Natural stone for sharpening, oil, type Arkansas Translucent Ultrafine

Made in USA, Made of Novaculite of the highest quality and cleverly cut at the artisan level, it guarantees very high performances both in sharpening and polishing. Contained in a practical wooden box, it is not fastened or glued and is inserted into a comfortable silicone non-slip support.

Ideal for rewinding of free razors or for cleaning blades.

Dimensions: 20 x 5 x 1.17 cm.
Quality level: Very high

Intended use: Tactical

Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade treatment: Darkwashed
Handle: Titanium Darkwashed
Blade Length: 100mm.
Blade thickness: 3mm.
Closed length: 125mm.
Overall length: 218mm.
Closed thickness: 14mm.
Weight: 160g.
Opening: carson pinball system
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: deep pocket, removable and reversible stainless steel
Packing: Cardboard box with Bastinelli Knives logos
Notes: Rear fender - Produced by Lion Steel

Intended use: Tactical

Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade treatment: Darkwashed
Handle: G10 and Titanium Darkwashed
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 200mm.
Closed thickness: 13mm.
Weight: 117g.
Opening: thumbstood ambidestro
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: deep pocket, removable and reversible stainless steel
Packing: Cardboard box with Bastinelli Knives logos
Notes: Glass Breaker - Produced by Lion Steel

Intended use: Tactical

Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: G10 and anodized titanium
Blade Length: 85mm.
Blade thickness: 3.5mm.
Closed length: 115mm.
Total length: 195mm.
Closed thickness: 14mm.
Weight: 99g.
Opening: thumbstood ambidestro
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: Stainless steel removable
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Lion Steel

Intended use: Tactical

Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: G10 and Titanium
Blade Length: 120mm.
Blade thickness: 5mm.
Closed length: 160mm.
Total Length: 270mm.
Closed thickness: 14mm.
Weight: 236g.
Opening: removable thumbnail, ambidextrous
Washers: Teflon
Closure: Framelock with additional Rotoblock security system
Clip: Stainless steel removable
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Lion Steel

Intended use: Tactical

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 66mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 184mm.
Closed thickness: 15mm.
Weight: 102g.
Opening: Emerson Wave type system
Washers: Brass
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Packing: Cardboard box with Bastinelli Knives logos
Notes: Doug Marcaida and Funker Tactical - Produced by Fox FKMD

Intended use: Tactical / CQC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: Stone Washed
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMD

Intended use: Tactical / CQC

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: PVD
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMD

Use target: neck knife

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Stone Washed
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMD

Use target: neck knife

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Black Cerakote
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMD

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Manicure: wood
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9.4 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 110 mm.
Weight: 426g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la main

Blade: Carbon Steel
Handle: horn
Blade length: 225 mm.
Blade Thickness: 10 mm.
Overall length: 350 mm.
Weight: without covers g. 375 - g with sheath. 504
Sheath: leather and wood, handmade
Notes: every knife and 'entirely handmade in Nepal and also includes two small knives.

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: Wood
Finishes: Brass
Blade length: 270 mm.
Blade Thickness: 10 mm.
Overall length: 400 mm.
Karda: 105 mm.
Chakmak: 105 mm.
Weight: 434g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by hand

Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la main

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: engraved patterns in black and gold with a drawing of a sun
Handle: Wood
Finishes: Brass
Blade length: 225 mm.
Blade Thickness: 8.5 mm.
Overall length: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 350g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by hand

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Covered
Aunlo-Bal: -
Handle: Wood
Blade length: 230mm.
Blade Thickness: 11mm.
Overall length: 395mm.
Karda: horn length. tot. 12mm.
Chakmak: horn length. tot. 12mm.
Weight: 690g.
Sheath: wood and leather
Notes: Nepalese original knife made entirely by hand

Kukri Artisan - Panawal horn - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade thickness: 9mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 482g.
Sheath: wood and leather
Notes: Original Nepalese knife made entirely by hand

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade Thickness: 8mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 434g.
Sheath: wood and leather decorated
Notes: Knife Original Nepalese entirely handmade - 7 accessories included in the sheath

Kukri Artisan - Dhankute Silver - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and silver
Blade length: 320mm.
Blade Thickness: 10mm.
Overall length: 440mm.
Karda: length. tot. 6.3mm.
Chakmak: length. tot. 6.3mm.
Weight: ì (774g. Sheath)
Sheath: horn and Nepalese symbols silver
Notes: Original Nepalese knife made entirely by hand

Kukri Artisan - Dhankute 11 "horn - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and brass
Blade length: 220mm.
Blade Thickness: 8mm.
Overall length: 340mm.
Karda: horn length. tot. 65mm.
Chakmak: horn length. tot. 65mm.
Weight: 434g.
Sheath: Nepalese brass horn with symbols
Notes: Original Nepalese knife made entirely by hand

Lama: Acciaio al carbonio
Conformazione: Lama full tang
Kauri: Scoperto
Aunlo-Bal: singola linea nera incisa
Manicatura: Corno nero di bufalo 
Finiture: -
Lunghezza lama: 250 mm.
Spessore della lama: 6 mm.
Lunghezza totale: 375 mm.
Peso: 680g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano

Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.

Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmade

Kukri Artisan - Ceremonial Long Aluminum 027 - knife

Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Kukri Artisan - Ceremonial Long Aluminum 027 - knife

Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Use: Tactical / EDC

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Texas Tea
Handle: Titanium brushed
Blade length: 76mm.
Blade thickness: 4.7mm.
Overall length: 190mm.
Thickness when folded: 12mm.
Balancing: -
Weight: 115g.
Lock: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Specimen edition liminata individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: DLC
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Use: Tactical / EDC

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: Titanium brushed
Blade length: 76mm.
Blade thickness: 4.7mm.
Overall length: 190mm.
Thickness when folded: 12mm.
Balancing: -
Weight: 115g.
Lock: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Specimen edition liminata individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-154CM
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 16.5mm.
Balancing: -
Weight: 284g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CTS-BD4P
Treatment Lama: Texas Tea
Handle: G-10
Blade length: 76mm.
Blade thickness: 5mm.
Total Length: 19.6mm.
Thick when closed: 13mm.
Balancing: -
Weight: 181g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical / EDC

Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-154CM
Treatment Lama: Limo Tint Full Black
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical / Neck

Type of production: Industrial
Production Blade: 100% USA
Blade: Titanium Beta
Treatment Blade: -
Handle: -
Blade length: 50mm.
Blade thickness: 4mm.
Total length: 76mm.
Thick when closed: -
Balancing: -
Weight: 18g.
Closure: -
Clip: -
Sheath: Kydex, thermoformed vacuum neck
Packaging: Cardboard box with logos Quartermaster
Notes: -

Intended use: Tactical

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless Steel sintered CTS-BD4P
Treatment Blade: Texas Tea
Handle: G-10
Blade length: 89mm.
Blade thickness: 5mm.
Overall length: 241mm.
Thick when closed: 13mm.
Balancing: -
Weight: 213g.
Lock: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless Steel sintered CPM-154CM
Treatment Blade: Texas Tea
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 279mm.
Thick when closed: 19mm.
Balancing: -
Weight: 329g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless Steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 279mm.
Thick when closed: 19mm.
Balancing: -
Weight: 329g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered Carpenter CTS BD-4P Alloy
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 267mm.
Thick when closed: -
Balancing: -
Weight: 275g.
Closure: -
Clip: -
Sheath: Kydex Ghost transparent, thermoformed vacuum, fixed with Malice Clips, MOLLE compatible
Packaging: Cardboard box with logos Quartermaster
Note: Specimen liminata edition individually numbered on the blade and box

Intended use: Tactical / EDC

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Texas Tea Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 50mm.
Blade thickness: 5mm.
Overall length: 152mm.
Thick when closed: 13mm.
Balancing: -
Weight: 148g.
Lock: Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical / EDC

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 50mm.
Blade thickness: 5mm.
Overall length: 152mm.
Thick when closed: 13mm.
Balancing: -
Weight: 148g.
Lock: Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical / EDC

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical / EDC

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical / EDC

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Texas Tea Stone Washed
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Intended use: Tactical / EDC

Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Texas Tea Stone Washed
Handle: G-10
Blade length: 65mm.
Blade thickness: 5mm.
Overall length: 150mm.
Thick when closed: 17mm.
Balancing: -
Weight: 147g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box

Kukri - World War II Gurkha

Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).

Lama: Acciaio al carbonio
Manicatura: Legno - ATTENZIONE, trattandosi di un prodotto artigianale la colorazione del manico può variare rispetto al modello fotografato
Lunghezza lama: 250 mm.
Spessore della lama: 11 mm.
Lunghezza totale: 405 mm.
Peso: -- g.
Fodero: in cuoio con trattamento camouflage e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.

Blade: carbon steel
Structure: Dui Chirra
Kauri: uncovered
Handle: carved wood
Finishing: brass
Blade Length: 210 mm.
Blade Thickness: 8 mm.
Total Length: 310 mm.
Karda: 75 mm.
Chakmak: 75 mm.
Weight: 186g.
Sheath: leather and brass
Notes: original nepalese knife, totally handmade 

The symbolic meaning of love knife, so you call the knife produced specifically to be exchanged between engaged, is twofold: - given to man symbolizes the incitement to the courage, virility, to prevail in the social context - given the woman takes the significance of accepting the commitment to defend their honor and the faith given to the blood. For both finally assume the archaic ritual significance to sanction the signing of a contract not yet institutionalized.

The handle is decorated with classic "dice eyes" that are meant to turn the knife in a valuable amulet against the evil eye. After marriage these knives were usually hung on the wall above the bed.

Blade: Stainless Steel 420
Handle: white deer with .925 silver and onyx stones set
Blade length: 105m.
Blade Thickness: 25mm.
Closed Length: 134mm
Overall length: 240mm.
Weight: 102g.

Kukri - Gurkha Army

Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).

Blade: Carbon steel
Manicure: black polished horn
Blade length: 265 mm.
Blade thickness: 10 mm.
Total length: 390 mm.
Weight: g.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.

NOTA: Trattandosi di prodotti artigianali, i prodotti a nostra disposizione potrebbero lievemente differire dal punto di vista estetico rispetto a quello presente in foto

Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: Scoperto
Aunlo-Bal: motivi incisi in nero e oro con un disegno di un sole
Manicatura: Corno nero di bufalo lucidato ed inciso
Finiture: Ottone
Lunghezza lama: 205 mm.
Spessore della lama: 8.5 mm.
Lunghezza totale: 320 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Peso: 350g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano

Blade: carbon steel
Structure: Dui Chirra
Kauri: uncovered
Handle: carved wood
Finishing: brass
Blade Length: 210 mm.
Blade Thickness: 8 mm.
Total Length: 310 mm.
Karda: 75 mm.
Chakmak: 75 mm.
Weight: 186g.
Sheath: leather and brass
Notes: original nepalese knife, totally handmade 

Lama: Acciaio al carbonio completamente incisa con motivi di draghi (attenzione: possono variare rispetto a quanto visualizzato in foto)
Conformazione: Dui Chirra
Kauri: Scoperto
Aunlo-Bal: -
Manicatura: Legno inciso
Finiture: Ottone
Lunghezza lama: 455 mm.
Spessore della lama: 12 mm.
Lunghezza totale: 630 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Peso: 1275g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano

Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: Coperto
Aunlo-Bal: Motivi incisi neri e dorati con una stella a 5 punte
Manicatura: corno
Finiture: Ottone
Lunghezza lama: 325 mm.
Spessore della lama: 11 mm.
Lunghezza totale: 470 mm.
Karda: 115 mm.
Chakmak: 115 mm.
Peso: 562g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano

Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: coperto
Aunlo-Bal: disegno inciso nero e oro
Manicatura: legno e ottone
Lunghezza lama: 260mm.
Spessore della lama: 11mm.
Lunghezza totale: 400mm.
Karda: lungh. tot. 55mm.
Chakmak: lungh. tot. 55mm.
Peso: 414g. (574g. con fodero)
Fodero: in ottone e legno
Note: Coltello originale nepalese interamente realizzato a mano