Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Ontario Knife Company - Spec Plus SP-2 Survival Knife - 8680 - knife
Intended Use: Survival / Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder coating
Handle: kraton
Blade length: 140mm.
Blade thickness: 4.5mm.
Total length: 269mm.
Balancing: advanced
Weight: 255g.
Scabbard: Belt, nylon, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -ON8680 -
Ontario Knife Company - Bob Dozier Arrow Folder - 9100 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Stonewashed
Handle: G10
Blade length: 92mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 11.7mm.
Weight: 85g.
Opening: through thumbstood, from right-handed
Washers: teflon
Closure: liner lock
Clip: stainless steel, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Bob DozierON9100 -
Ontario Knife Company - Hunt Plus Skinner - 9716 - knife
Intended use: Hunting / Hiking
Type of production: Industrial
Country of production: USA
Blade: full tang in 440B stainless steel
Blade treatment: satin finish
Handle: in kraton
Blade length: 110mm.
Blade thickness: 4.7mm.
Total length: 230mm.
Balancing: slightly advanced
Weight: 160g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON9716 -
Ontario / Utilitac II - JPT-3S Drop by Joe Pardue - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: -
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Sports / EDC
Type of production: Industrial
Blade production: Taiwan
Blade: AUS-8 58HRC stainless steel
Blade Treatment: -
Handle: Zytel
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 205mm.
Closed thickness: 14mm.
Balancing: -
Weight: 152g.
Closure: Liner Lock
Clip: stainless steel
Sheath: -
Packaging: -
Notes: Design by Joe PardueAP-2798 -
Ontario Knife Company - Spec Plus SP-1 Combat Knife - 8679 - tactical knife
Intended Use: Tactical / Military
Production type: Industrial
Country of Production: USA
Blade: hidden tang in 1075 carbon steel
Blade treatment: powder coating
Handle: kraton
Blade length: 178mm.
Blade thickness: 4.5mm.
Total length: 308mm.
Balancing: advanced
Weight: 286g.
Scabbard: Belt, nylon, for vertical carrying.
Package: Cardboard box with OKC logos
Notes: -ON8679 -
Ontario Knife Company - MOD Mark 3 Navy Dive Knife - 6141 - knife
Intended Use: Multirole / Tactical
Production type: Industrial
Country of Production: USA
Blade: hidden tang in 1095 carbon steel
Blade treatment: Phosphated
Handle: Thermoplastic, with steel tang and guard
Blade length: 152mm.
Blade thickness: 4mm.
Total length: 282mm.
Balance: backward
Weight: 294g.
Scabbard: thermoplastic, with steel inner lock and Cordura back loop.
Package: Cardboard box with OKC logos
Notes: Knife produced and used for many decades by the U.S. naval forces.ON6141 -
Ontario Knife Company - Spec Plus SP-6 Fighting Knife - 8682 - tactical knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 330mm.
Balancing: on the guard branch
Weight: 323g.
Sheath: belt, in cordura and leather, vertical carry
Packaging: Cardboard box with OKC logos
Note: -ON8682 -
Ontario Knife Company - SP53 Bolo Knife - 8689 - knife
Designed by Dan Maragni, the Ontario SP53 Bolo Knife features a 25cm bolo-style blade made of 5160 steel with an epoxy powder coating. The Bolo SP53 knife comes complete with a MOLLE compatible black tactical sheath and is made in the USA.
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 Carbon Steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 257mm.
Blade thickness: 6.4mm.
Total length: 384mm.
Balancing: advanced
Weight: 940g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8689 -
Ontario Knife Company - SP24 USN-1 Survival Knife - 8688 - knife
The SP24 USN-1 survival knife is one of Ontario Knife Company's Spec Plus series models. Designed for military use but practical enough as a survival knife, camping knife or even hunting knife. In addition to the serrations on both sides, there is also a rope cutter on the blade of the knife. As with all Spec Plus, the SP24 USN-1 survival knife is made in the United States.
Intended use: Tactical / MilitaryType of production: Industrial
Country of production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder Coat
Handle: in kraton, with steel tang
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 245mm.
Balancing: 3cm back
Weight: 225g.
Sheath: nylon, modular, compatible with M.O.L.L.E.
Packaging: Cardboard box with OKC logos
Note:ON8688 -
Ontario Knife Company - Spec Plus SP5 Bowie Survival - 8681 - knife
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 250mm.
Blade thickness: 6mm.
Total length: 380mm.
Balancing: advanced
Weight: 425g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8681 -
Ontario Knife Company - Bob Dozier Black Arrow Folder knife - 9101 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: in tool steel D2
Blade treatment: Black
Handle: G10
Blade length: 92mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 11.7mm.
Weight: 85g.
Opening: by thumbstood, by right-handed
Washers: teflon
Closure: liner lock
Clip: in stainless steel, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Bob DozierO9101 -
Ontario Knife Company - Hunt Plus Drop Point - 9715 - knife
Intended use: Hunting / Hiking
Type of production: Industrial
Country of production: USA
Blade: full tang in 440B stainless steel
Blade treatment: satin finish
Handle: in kraton
Blade length: 110mm.
Blade thickness: 4.7mm.
Total length: 230mm.
Balancing: slightly advanced
Weight: 160g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON9715 -
Ontario Knife Company - Spec Plus Alpha Survival - 9710 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: phosphated
Handle: in kraton
Blade length: 135mm.
Blade thickness: 4.7mm.
Total length: 260mm.
Balancing: slightly advanced
Weight: 184g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON9710 -
Ontario Knife Company - FF6 Freedom Fighter - 8106 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: epoxy powders
Handle: in kraton, with tang and steel guard
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 330mm.
Balancing: on the guard branch
Weight: 368g.
Sheath: belt, in cordura and leather, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON8106 -
Ontario Knife Company - SP10 Raider Bowie - 8684 - knife
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton with steel guard
Blade length: 245mm.
Blade thickness: 6.8mm.
Total length: 380mm.
Balancing: advanced
Weight: 620g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8684 -
Ontario Knife Company - ASEK Survival System - 1400 - knife
ASEK KNIFE
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in kraton, with tang and steel guard
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 270mm.
Balancing: set back
Weight: 266g.
Sheath: nylon, modular, M.O.L.L.E compatible, with polypropylene interior and special compartment for the ASK Tool
Packaging: Cardboard box with OKC logos
Note: The survival system consists of a knife and an Asek Rescue Tool emergency toolASEK RESCUE TOOL
Blades: 420j2B stainless steel, HRC 54-56 hardness
Handle: aluminum
Total length: 170 mm
Notes: also equipped with a screwdriver / prybar and ceramic sharpenerON1400 -
Ontario Knife Company - SP8 Survival Machete - 8683 - knife
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 255mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: advanced
Weight: 642g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with Ontario Knife Company logos
Note: -ON8683 -
Ontario Knife Company - Chimera Plain Edge - 6517 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in rubber, with tang and steel guard
Blade length: 200mm.
Blade thickness: 5.2mm.
Total length: 345mm.
Balancing: set back
Weight: 424g.
Sheath: in polypropylene, modular, compatible with M.O.L.L.E., with integrated ceramic sharpener
Packaging: Cardboard box with OKC logos
Note: -ON6517 -
Kukri Artisan - Panawal wood - Nepalese knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Covered
Aunlo-Bal: -
Handle: Wood
Blade length: 230mm.
Blade Thickness: 11mm.
Overall length: 395mm.
Karda: horn length. tot. 12mm.
Chakmak: horn length. tot. 12mm.
Weight: 690g.
Sheath: wood and leather
Notes: Nepalese original knife made entirely by handPANA21 -
Kukri Artisan - Panawal horn - Nepalese knife
Kukri Artisan - Panawal horn - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade thickness: 9mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 482g.
Sheath: wood and leather
Notes: Original Nepalese knife made entirely by handPANA22 -
Kukri Artisan - Ganjawala multipurpose horn 18 - Nepali knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade Thickness: 8mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 434g.
Sheath: wood and leather decorated
Notes: Knife Original Nepalese entirely handmade - 7 accessories included in the sheathGAN18 -
Kukri Artisan - Dhankute 11 "horn - Nepalese knife
Kukri Artisan - Dhankute 11 "horn - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and brass
Blade length: 220mm.
Blade Thickness: 8mm.
Overall length: 340mm.
Karda: horn length. tot. 65mm.
Chakmak: horn length. tot. 65mm.
Weight: 434g.
Sheath: Nepalese brass horn with symbols
Notes: Original Nepalese knife made entirely by handDHAN11 -
Cesare Tonelli - RWL Steak Knife Black Micarta - custom knife
Intended use: Collection / Steak / Sports
Production Type: Handmade
Production Blade: Italy
Blade: Stainless steel RWL34 to 60HRC
Treatment Blade: Mirror Polishing
Handle material: Black Canvas Micarta with 416 stainless steel guard and passing
Blade length: 98mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 62g.
Sheath: handmade and hand-sewn, leather with python inserts
Notes: Handmaded by Cesare Tonelli, Maestro Coltellinanio CIC (Italian Knives Corporation)10150€204.10Out of stock -
Crafty Kukri - Jungle knife 001 - knife
Kukri - Gurkha Army
Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).
Blade: Carbon steel
Manicure: black polished horn
Blade length: 265 mm.
Blade thickness: 10 mm.
Total length: 390 mm.
Weight: g.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.3600 -
Kukri Artigianale - Chitlange corno 24 - coltello nepalese
Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: Coperto
Aunlo-Bal: Motivi incisi neri e dorati con una stella a 5 punte
Manicatura: corno
Finiture: Ottone
Lunghezza lama: 325 mm.
Spessore della lama: 11 mm.
Lunghezza totale: 470 mm.
Karda: 115 mm.
Chakmak: 115 mm.
Peso: 562g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano3606 -
Kukri Artigianale - Service 2 - coltello
Lama: Acciaio al carbonio
Conformazione: Lama piana
Kauri: Scoperto
Aunlo-Bal: singola linea nera incisa
Manicatura: Corno nero di bufalo inciso
Finiture: Ottone
Lunghezza lama: 260 mm.
Spessore della lama: max 10 mm.
Lunghezza totale: 395 mm.
Karda: 110 mm.
Chakmak: 100 mm.
Peso: 520 g.
Peso con fodero: 692 g.
Fodero: in legno e materiale plastico
Note: Coltello originale nepalese interamente realizzato a mano: le caratteristiche dei singoli pezzi possono quindi variare.3611-2 -
Kukri Artigianale - World War II Gurkha knife Horn - knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: single engraved, black line
Manicure: Black horned horn engraved and polished
Finishes: Brass
Blade length: 275 mm.
Blade thickness: 10 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 105 mm.
Weight: 505g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand3612 -
Kukri Crafts - Service 1 Nepal knife - knife
Blade: Carbon steel
Conformation: Flat blade
Kauri: Discovered
Aunlo-Bal: single black line engraved
Manicure: Black horn of polished and engraved buffalo
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9 mm.
Total length: 380 mm.
Karda: 120 mm.
Chakmak: 115 mm.
Weight: 490g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand3611 -
Ontario / Utilitac II - JPT-4R Tanto by Joe Pardue - coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: -
Manicatura: Zytel
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 200mm.
Spessore da chiuso: 14mm.
Bilanciatura: -
Peso: 158g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Utilitac II
Note: Design by Joe Pardue2797 -
Ontario Knife Company - 498 Marine Combat knife - knife
This knife is used exclusively by the United States Marine Corps and has been manufactured by the Ontario Knife Company for many years now.
Intended use: military / collection
Type of production: Industrial
Production Lama: America
Blade: 1095C carbon steel
Blade treatment: Phosphates
Handle: Painted leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 305mm.
Thick when closed: -
Balance: set back, at 1cm.
Weight: 284g.
Closing: -
Clip: -
Sheath: Black Leather
Packaging: transparent plastic bag
Note: -ON498 -
Ontario Knife Company - ASEK Rescue Strap Cutter Assembly - 1403 - multipurpose
Originally produced as an accessory to the ASEK survival knife series, this ASEK belt cutter is constructed of anodized aluminum. The ASEK Strap Cutter can also be considered a multi-tool thanks to the ceramic sharpener, the lanyard and the presence of a screwdriver. Click here for replacement blades for the ASEK Belt Cutter. The ASEK cutter blades are made in the USA.
Total length: 16.8 cm
Hardness: 55 HRC
Handle color black
Black blade color
Blade thickness: 0.064 cm
Blade material: 440 stainless steel
Blade length: 2.5 cmON1403