Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Wander Tactical - Godfather Bowie Custom Edition - Ice Brush & Micarta Green - knife
Use: Heavy Duty / Collection
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Ice Brush
Handle: Micarta
Blade Length: 237mm.
Blade thickness: 6.5mm.
Total length: 390mm.
Balance: backward
Weight: 690g.
Sheath: leather
Packaging: certificate of guarantee and authenticity
Notes: special edition, with bowie-style bladeWT-GF-BIBG -
Wander Tactical - Barracuda Compound - Raw & Black Micarta - handmade knife
Use: EDC / Light Utility / All Round
Type of production: Handmade
Country of Production: Italy
Blade: integral, D2 steel at 59/61HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Balance: backward
Weight: 214g.
Sheath: made of Kydex, thermoformed, with tek-lok type attachment
Packaging: certificate of guarantee and authenticity
Notes: Each knife is unique and handcraftedWT-BAR-CRB -
Conaz Consigli Scarperia - Zuava knife 16 cm raw ox horn 50307 - knife
Intended use: sporting/collection
Type of production: artisan
Blade production: Italy
Blade: Stainless steel X50CrMoV15
Blade treatment: -
Handle: Raw ox horn
Blade length: 70mm.
Blade thickness: 1,6mm.
Length closed: 90mm.
Total length: 160mm.
Weight: 53g.
Closure: without blade lock
Packaging: cardboard box
Sheath: -Craftsmanship is beautiful because it is varied
The colours of the materials from which the handicrafts are made may vary from those shown in the pictures.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: that's the beauty of fine materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: that's the beauty of fine workmanship. Combine all this and you have a product that is always different and unique. And always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.
50307 -
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife
This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.
Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs
Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm50075 -
Conaz Consigli Scarperia - Fiorentino Bovino knife cm 24 - 50018 - knife
Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 148g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.R-FIC24 -
Consigli Scarperia - Calabrese in bovine R-CAC20 - knife
A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip50004 -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 17cm - 53161 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 34g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53161 -
Conaz Consigli Scarperia - Pattada Brotzu raw mutton 22cm PBM22G - knife
Pattada Brotzu raw mutton 22cm PBM22G - knife
Typical folding knife craftsmanship Sardinian manufactured by Conaz ScarperiaBlade: stainless steel 420
Handle: raw mutton
Blade length: 90mm.
Overall length: 215mm.
Weight: 64g.WARNING: these are natural material, the color of the horn may be different from the one in the picture.
PBM22G -
Conaz Consigli Scarperia - Zuava knife 19 cm raw ox horn 50309 - knife
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ox horn
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 190mm.
Weight: 79g.
Closing: without blade lock
Packaging: cardboard box
Sheath: -
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50309 -
Conaz Consigli Scarperia - Mugello 16 cm horn cattle raw E-CMC16G - knife
Mugello 16 cm horn cattle raw E-CMC16G - knife
Blade: 420 stainless steel
Handle: raw beef
Blade length: 75mm.
Overall length: 165mm.
Weight: 39g.
Closed Length: 90mm.
CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.50306 -
Conaz Consigli Scarperia - Ghiandina 16 cm horn cattle raw E-GHC16G - knife
Ghiandina 16 cm horn cattle raw E-GHC16G - knife
Blade: 420 stainless steel
Handle: raw beef
Blade length: 70mm.
Overall length: 160mm.
Weight: 36g.
Closed Length: 90mm.
CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.50308 -
Conaz Consigli Scarperia - Arbus knife - Arburese Bovine Blonde Horn 20cm - 53021 - knife
Characteristic Sardinian knife, typical of the Arbus area, blade with a characteristic bellied shape, very suitable for leather.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 15mm.
Total length: 205mm.
Weight: 73g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53017B -
Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife
Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50002 -
Conaz Consigli Scarperia - Pattada Brotzu knife bovine horn 22cm - 53142 - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by the Scarperia Consigli company.
The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition.
Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 120mm.
Total length: 215mm.
Weight: 62g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53142 -
Conaz Consigli Scarperia - Pattada Brotzu knife ox horn - 53143 - 24cm - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 76g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53143 -
Wander Tactical - Haast Eagle 2.0 knife - Compound Raw D2 & Brown Micarta - handmade knife
Intended Use: Multirole / Utility
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade finish: Raw, with compound type sharpening
Handle: Micarta
Blade length: 150mm.
Blade thickness: 5mm.
Total length: 295mm.
Balance: advanced
Weight: 395g.
Sheath: thermoformed Kydex with multi-position belt loop, MOLLE compatible
Packaging: polypropylene case with Wander Tactical logos and certificate of authenticity signed and dated
Notes: Particular unique specimen with compound type sharpeningWT-HE2-CORBM -
Wander Tactical - Haast Eagle 2.0 - Dark Washed Compound & Black Micarta - knife
Intended Use: Multirole / Utility
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Dark Washed, with compound type sharpening
Handle: Micarta
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 295mm.
Balance: advanced
Weight: 395g.
Sheath: made of thermoformed Kydex
Packaging: bulk knife inserted in its own sheath, hand-filled warranty certificate
Notes: Each knife is unique and handcraftedWT-HE2-DWBM -
Wander Tactical - Godfather - Stone Edge & Brown Micarta - knife
Type of production: Artisan
Country of manufacture: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Stone Edge
Handle: Micarta
Blade Length: 240mm.
Blade thickness: 6.5mm.
Total length: 403mm.
Balance: backward
Weight: 740g.
Sheath: made of thermoformed kydex
Packaging: bulk knife inserted in its own sheath, warranty certificate filled in by hand
Notes: Each knife is unique and handcraftedWT-GF-SEBM -
Wander Tactical - Godfather - Black Blood Blade & Black Micarta - knife
Type of production: custom made
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Black Blood
Handle: Micarta
Blade Length: 240mm.
Blade thickness: 6.5mm.
Total length: 403mm.
Balance: backward
Weight: 740g.
Sheath: made of thermoformed kydex
Packaging: bulk knife inserted in its own sheath, warranty certificate
Notes: Each knife is unique and handcraftedWT-GF-BB-B2 -
Wander Tactical - Explorer - Raw & Green Micarta - custom made knife
Intended Use: Light Utility
Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 107mm.
Blade thickness: 4mm.
Total length: 234mm.
Balance: backward
Weight: 214g.
Sheath: made of thermoformed kydex, with M.O.L.L.E. compatible belt loop.
Packaging: accompanied by certificate of guarantee and authenticity,
Notes: handcrafted knifeWT-EX-RGM -
Wander Tactical - Scrambler Compound - Black Raw & Green Micarta - custom made knife
Use: Light Utility / All Round
Type of production: Handcrafted
Country of Production: Italy
Blade: integral, D2 steel at 59/61HRC
Blade treatment: Black Raw
Handle: Micarta
Blade Length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balance: backward
Weight: 200g.
Sheath: made of Kydex, thermoformed
Packaging: accompanied by certificate of guarantee and authenticity
Notes: handcrafted knifeWT-SCR-BRC -
Wander Tactical - Scrambler - Clip Point Black Raw Finish - custom made knife
Use: Light Utility / All Round
Type of production: Handcrafted
Country of Production: Italy
Blade: integral, D2 steel at 59/61HRC
Blade treatment: Black Raw
Handle: Micarta
Blade Length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balance: backward
Weight: 200g.
Sheath: made of Kydex, thermoformed
Packaging: accompanied by certificate of guarantee and authenticity
Notes: handcrafted knifeWT-SCR-BCL -
Wander Tactical - Godfather - Comix Limited Edition - handcrafted knife
Exclusive knife in entirely handcrafted "Comix" coloration, part of a batch of products made especially for the Atlanta 2023 Blade Show.
"Comix" type coloring refers to a coloring technique used in comic books and illustrations that is inspired by the style of traditional comic books. This style of coloring often features flat, bright colors with sharp edges between different shades. Some hallmarks of comix-type coloring include:
Flat backgrounds: Areas of solid color are applied without shading or complex tonal gradations. This gives a more "clean" and stylized look to the image.
Sharp edges: The borders between different shades of color are often marked by black or dark contour lines. These lines define the boundaries of the various elements in the image and accentuate the contrast between the different colors.
Bright colors: In comix-type coloring, bright, saturated colors are often used to create visual impact. These colors can be used to distinguish characters or to emphasize certain elements of the image.
Simplified shading: Although comix-type coloring may include shadows and highlights to add depth, these are often simplified compared to other coloring techniques. Shadows may be represented by areas of darker color or simple lines or brush strokes.
Graphic effects: Some elements of graphic effects, such as dots or speed lines, can be used to accentuate action or movement in illustrations.
Production Type: Handcrafted
Blade Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: "Comix" coloring, entirely handmade and hand-painted
Handle: Micarta
Blade length: 240mm.
Blade thickness: 6.5mm.
Total length: 403mm.
Balance: backward
Weight: 740g.
Sheath: made of thermoformed kydex
Packaging: unpacked - supplied with certificate of originality and Wander Tactical warranty
Notes: This knife is part of an exclusive batch of knives made entirely by hand and customized one by one designed for the Atlanta 2023 Blade Show.WT-GF-CMX -
Wander Tactical - Scrambler Clip knife - Raw Finish & Brown Micarta - craft knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balancing: backward
Weight: 201g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings or usable as a neck knife
Packaging: -
Notes: unique knife with Clip point tip, handcraftedWT-SCR-CL-B -
Wander Tactical - Godfather Clip knife - Raw Finish & Brown Micarta - custom knife
Production Type: Artisan
Blade Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw Finish
Handle: Micarta
Blade Length: 243mm.
Blade thickness: 6mm.
Total length: 400mm.
Balance: backward
Weight: 662g.
Sheath: made of thermoformed kydex
Packaging: -
Notes: unique and handcrafted knifeWT-GF-RF-BM -
Wander Tactical - Dimorphodon Rambo knife - Black Blood & Black Micarta - Limited Edition
Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Black Blood dual tone
Handle: Micarta
Blade length: 198mm.
Blade thickness: 5mm.
Total length: 345mm.
Balancing: backward
Weight: 436g.
Sheath: in brown leather
Packaging: without packaging, supplied with its own certificate of authenticity
Notes: Dimorphodon with clip point tip and Rambo knife style blade - Limited Edition - Each knife is unique and handcraftedWT-DIM-RA-BB -
Wander Tactical - Lynx Clip Knife - Black Blood & Black Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Black Blood
Handle: Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 236mm.
Balancing: set back
Weight: 274g.
Sheath: in kydex
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differencesWT-LYC-BM -
Wander Tactical - Prototype - PRIVATE COLLECTION - SanMai V-Toku2 & Desert Paracord - custom knife
Absolutely like new - Comes from a private collection - Unique item made in 2020, prototype, does not correspond to any standard model of Wander Tactical production - Made entirely by hand.
Use: Collection / Utility / Hunting
Production type: Handcrafted
Country of Production: Italy
Blade: integral, japanese rolled steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade finish: satin finish
Handle: Paracord
Blade length: 90mm.
Blade thickness: 6.65mm.
Total length: 200mm.
Balance: backward
Weight: 180g.
Sheath: in kydex
Package: Certificate of authenticity
Notes: Unique piece of 2020 - Prototype: it doesn't correspond to any standard model of Wander Tactical production - Entirely hand made - Absolutely like new, coming from a private collection,Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Coltelleria Collini, we decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance. At the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.
As in the ancient swords of the Japanese Samurai.
The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals taken individually:
- Longer cutting edge life
thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For further information: collinisteel
WT-PRO-VT -
Wander Tactical - Special Commando knife - Brown Micarta - custom knife
special knife made by Wander Tactical in April 2021
Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique pieceWT-SC-BBM -
Wander Tactical - Special Commando knife - Brown Micarta - custom knife
special knife made by Wander Tactical in April 2021
Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique pieceWT-USC-BM -
Wander Tactical - Special Commando knife - Brown Micarta - custom knife
special knife made by Wander Tactical in April 2021
Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique pieceWT-SC-BM -
Wander Tactical - Drago The Beast knife - Raw Finish & Green Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 2430mm.
Blade thickness: 6.5mm.
Total length: 400mm.
Balancing: backward
Weight: 712g.
Sheath: in thermoformed kydex and leather
Packaging: -
Notes: exclusive model produced in just two pieces and handcraftedWT-DR-RM -
Wander Tactical - Prototype X-020 knife - Green paracord - custom knife
special prototype made by Wander Tactical in October 2020
Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: -
Handle: Green paracord
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 260mm.
Balancing: on the branch of gurdia
Weight: 201g.
Sheath: in kydex
Packaging: -
Notes: unique pieceWT-X020 -
Wander Tactical - Godfather knife - Marble & Black Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Marble
Handle: Micarta
Blade length: 240mm.
Blade thickness: 6.5mm.
Total length: 400mm.
Balancing: set back
Weight: 715g.
Sheath: in kydex
Packaging: -
Notes: GodFather modelWT-GF-M -
Wander Tactical - Tryceratops knife Clip Point - SanMai V-Toku2 & Black Micarta - custom knife
Japanese steel blends with Italian excellence
For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.
Tryceratops model .:
Use: Tactical / Utility
Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade finish: satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 130mm.
Balancing: set back
Weight: 188g.
Sheath: in kydex black
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-TRY-C-VT -
Wander Tactical - Godfather knife Tiger - Icebrush & Black Micarta - custom knife
Type of production: Artisan
Production Lama: Italy
Blade: 59 / 60HRC D2 steel
Blade treatment: Black Blood
Handle: Micarta
Blade length: 225mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: set back
Weight: 686g.
Sheath: in leather
Packaging: -
Notes: GodFather model with bowieWT-GF-T-CP -
Wander Tactical - Haast Eagle knife - SanMai V-Toku2 & Black Micarta - Unique piece
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
Haast Eagle model .: unique piece.
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 135mm.
Blade thickness: 6.5mm.
Total length: 285mm.
Balancing: backward
Weight: 378g.
Sheath: in black leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
Send feedback
History
Saved
CommunityWT-HE-VT2 -
Wander Tactical - Godfather knife - Bowie Iron Washed Custom Edition - knife
Type of production: Artisan
Lama production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Iron Washed
Handle: Micarta
Blade length: 225mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: set back
Weight: 686g.
Sheath: in leather
Packaging: -
Notes: GodFather Special Edition model with bowieWT-GF-BO -
Wander Tactical - Mini Bad Medicine knife - Satin & Green Paracord - Limited Edition
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in steel D2 at 59 / 61HRC
Blade treatment: -
Handle: Paracord
Blade length: 97mm.
Blade thickness: 6.5mm.
Total length: 204mm.
Balancing: set back
Weight: 170g.
Sheath: in Kydex, thermoformed, with tek-lok type connection
Package: -
Notes: Limited edition single pieceWT-MBM -
Wander Tactical - Godfather knife - Black Blood & Black Micarta - knife
Type of production: Artisan
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Black Blood
Handle: Micarta
Blade length: 225mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: set back
Weight: 686g.
Sheath: in leather
Package: -
Notes: GodFather model with bowieWT-GF-IB -
Wander Tactical - Haast - Satin SanMai CoS & Brown Micarta - craft knife
In collaboration with Wander Tactical, we have decided to offer their model TACTICO URO in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.
Use: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: in CoS SanMai steel 61.5 HRC
Lama treatment:
Handle: Micarta
Blade length: 135mm.
Blade thickness: 6.5mm.
Total length: 285mm.
Balancing: set back
Weight: 470g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.COS-HA-CB -
Conaz Consigli Scarperia - Hunchback Abruzzese Cattle knife 24cm - knife
This slender-shaped knife with a curved handle derives from ancient models used by the shepherds of Abruzzo. Its adoption in the repertoire of knives manufactured in Scarperia (where the particular crease of the handle earned it the name of "hunchback") dates back to the late nineteenth century and took place without flashy changes compared to the original type, equipped with a simple spring and one-piece bovine horn handle. This model is in horn tip.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 247mm.
Weight: 107g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50024 -
Conza Consigli Scarperia - Maremmano knife 24cm Ox Horn - 50031 - knife
The first certain information on this knife dates back to 1848. A specimen, dated 1871, is kept in the State Archives of Florence, attached to the documents of a trial against a convicted person. The mark of a Scarperia manufacturer, Gustavo Buffi, is clearly visible on it, the shape of the blade is that with an angled back, also maintained in the twentieth century and present in the catalogs of various firms in Scarperia. The Maremmano is a horn tip model.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 120g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
R-MFC24 -
Consigli Scarperia - Napoletano in bovine R-NAC20 - knife
The "Neapolitan" old drives is a knife in horn tip elongated, suitable to cut the use of tip. It is not clear which of the knives of the traditional Neapolitan is inspired model of Scarperia. The general line is somewhat related to the "Maremma" in the form assumed in the Mugello, but with more slender proportions and read.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tipR-NAC20 -
Consigli Scarperia - Casertano in bovine R-CASC20 - knife
The most striking feature of this model is in the edge of the blade, a full right to the tip. The Casertano lent itself well to a variety of uses, thanks to the cutting edge straight that finishes in a very simply shaped handle. This solution was very appreciated in different times and places, even outside the area where it originated, as to be still widespread. The Caserta is a model in horn tip.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 70 gr.
Handle in horn tipR-CASC20 -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 20cm - 53162 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53162 -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 24cm - 53164 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 83g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53164 -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 27cm - 53165 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 110mm.
Blade thickness: 3mm.
Length closed: 145mm.
Total length: 265mm.
Weight: 102g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
PBM27G -
Consigli Scarperia - Zuava Cattle Polished R-ZXC19 - knife
Zuava Cattle Polished R-ZVC19 - knife
Traditional knife of Scarborough and is used in all of Tuscany to the first 800. He had an element of novelty, for its time: the metal frame inside the handle as well in traditional cattle.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 19 cm.
Weight 100 gr.R-ZXC19 -
Conaz Consigli Scarperia - Zuava ox horn - cm 19 - 50077 - knife
Traditional Scarperia knife and used throughout Tuscany until the early 1800s. It had an element of novelty, for the time: the metallic structure inside the handle as well as in the traditional bovine.
440 stainless steel blade.
Blade length 8 cm.
Blade thickness 3 mm.
Open length 19 cm.
Weight 100 gr.50077 -
Conaz Consigli Scarperia - 24cm ox horn Zuava with blade lock - 50079 - folding knife, made in Italy
Intended use: collection
Type of production: handmade
Country of Production: Scarperia - Italy
Blade: stainless steel X50CrMoV15
Blade finish: satin-finished
Handle: ox horn and brass
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Weight: 193g.
Closure: blade lock
Packaging: cardboard box with Consigli logos
Sheath: fabric pouch
Handicrafts are beautiful because they are varied!
The colors of the materials from which crafts are made may vary from those shown in the pictures.
Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.50079 -
Conaz Consigli Scarperia - Piemontese knife in polished ox - 50046 - knife
Made according to the ancient art of knives, the Piedmontese knife, typical of the Piedmont Region, retains its original sober line.
Solid and functional, the blade is in stainless steel and the handle is a monobloc made of bovine horn.Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 90mm.
Total length: 180mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
PIC-18 -
Conaz Consigli Scarperia - Fiorentino knife Engraved Silver Cattle 50017 - knife
The silver Fiorentino version has the same construction characteristics as the classic Fiorentino, but it is made with silver finishes, in the lily, in the band and in the rings worked by hand by skilled engravers. Horn tip model.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and Silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 76g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which our handcrafted products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
R-FIC20A -
Conaz Consigli Scarperia - Pattada knife Brotzu raw ram horn - 53037 - 22cm - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of ram's horn are affected by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 120mm.
Total length: 215mm.
Weight: 53g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53037 -
Conaz Consigli Scarperia - Pattada Brotzu knife ram horn - 53035 - 17cm - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of ram's horn are affected by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 70mm.
Blade thickness: 2mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 35g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53035 -
Conaz Consigli Scarperia - Arbus knife - Arburese Corone Montone 20cm - 53017 - knife
Characteristic Sardinian knife, typical of the Arbus area; with blade with a characteristic bellied shape, very suitable for leather. Traditional shapes and fine finishes.
The shape reached today derives from ancient styles used in past times.
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 85mm.
Blade thickness: 2mm.
Length closed: 115mm.
Total length: 205mm.
Weight: 50g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53017M -
Conaz Consigli Scarperia - Maremmano Flat blade Olive - 50040 - knife
Knife in use for certain information until the first half of the 19th century in the Tuscan and Lazio Maremma.
Through finds from the criminological museum of Rome, he was seen among those knives handed over by the rioters of the penal baths of Civitavecchia to Cardinal Franco Pentini, in 1848, sent to put down a revolt.Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 205mm.
Weight: 56g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseThe craftsmanship is beautiful because it is varied
The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.50040 -
Conaz Consigli Scarperia - Senese knife polished bovine horn 50063 - knife
The name clearly indicates the area of origin, but this knife became part of Scarperia's production perhaps as early as the nineteenth century, taking over from an older model called "scimitar" due to the hollow shape of the back of the blade towards the tip.
The handle has no metal seals, apart from the tiny raperelle on which the three pins are pressed, is thinned at the end, making it particularly light, and is made of solid horn.Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 197mm.
Weight: 73g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
50063 -
Conaz Consigli Scarperia - Vernante Horn horn ox - 20 cm - 50073 - knife
Traditional knife produced by master cutlers in Scarperia, place where, since 1300, the craftsmanship of Italian knives continues.
Typical Piedmont knife, in use since the early 19th century also in Liguria. Originally from the village of Vernante (Cuneo).The 420 stainless steel blade can be scimitar or straight.
On the upper part of the heel there is always the characteristic appendix with the head of a nail which, by housing a socket in the handle, allows the blade to be held steady with the knifted thumb.
Used for all agricultural and domestic work and, for the particular sharpening, also for carving wood.
The cattlemen also used it as a surgical tool to carve the belly of cattle grazing, when too much wet grass was ingested causing excessive accumulation of gas.Total length: 200 mm
Blade length: 90mm
Handle: in full polished horn
Sharpened by hand2351 -
Conaz Consigli Scarperia - Zuava knife Buffalo horn "in the old way" 50091 - knife
Traditional Scarperia knife and used throughout Tuscany until the early 1800s.
It had an element of novelty, for the time: the metal structure inside the handle. As well as in the traditional bovine, Consiglio proposes it today also in buffalo and exotic woods.Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Buffalo horn
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 19mm.
Weight: 93g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50094 -
Conaz Consigli Scarperia - Zuava knife with Ox horn sundial - 50080 - knife
The version of the Zuava with sundial, very particular, carries on the blade the engraving of an ancient drawing of sundial, functioning. The hard is in brass.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 130mm.
Total length: 240mm.
Weight: 190g.
Closing: retention spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50080 -
Consigli Scarperia - Brotzu horn 27cm - knife
Brotzu horn 27cm - knife
Typical folding knife Sardinian handicraft produced by the firm of Scarborough Conaz
Blade: 420 stainless steel
Handle: horn
Blade length: 120mm.
Total length: 270mm.
Weight: 102g.WARNING: Since this is a natural material, the color of the horn may be different from the one in the picture.
7160 -
Consigli Scarperia - Fiorentino Buffalo Silver Engraved R-FIB20A - knife
Fiorentino Buffalo Silver Engraved R-FIB20A - knife
Craft knife regional product in Scarborough in use up to 800 in Tuscany.
The handle, in a single piece of horn, door foot in the characteristic ring round silver engraved.Blade of carbon steel
Blade length: 8.5 cm
Blade thickness: 2.5 mm
Length open: 20 cm
Weight: 78 gr0262 -
Consigli Scarperia - Pattada Brotzu horn 33cm - knife
Consigli Scarperia - Pattishall Brotzu horn 33cm - knife
Typical folding knife Sardinian handicraft produced by the firm of Scarborough Conaz
Blade: 420 stainless steel
Handle: horn
Blade length: 150mm.
Total length: 330mm.
Weight: 180g.WARNING: Since this is a natural material, the color of the horn may be different from the one in the picture.
7165