Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fallkniven - F1 Pro Knife Survival Kit - USED - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory
Intended Use: Hiking / All round utilityBlade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather caseF-F1PRO-CP -
Fallkniven - F1 Wolf - VG-10W Laminated and Leather Sheath - knife
New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.
Intended use: tactical/military/huntingBlade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995.F-F1LW -
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmax -
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmax -
Fallkniven - FDC - Double sharpener - diamond (25 microns) and ceramic (9 microns) - sharpening accessory
Support with two different bars, one in ceramic and one in diamond.
The yellow diamond sharpening stone (25 microns) is used to make a fine sharpening, with the white ceramic stone (9 microns) the edge of the knife is polished in order to obtain a razor-sharp edge.
For cleaning, use some dish soap and hot water.
Dimensions of the diamond / ceramic part:
10 cm x 2 cm
Total size open with plastic handle:
22 cm
Closed size:
12 cm x 3 cm
Weight: 65 gr
F-FDC -
Fallkniven - FDD - Double diamond sharpener - 25 and 44 microns - sharpening accessory
Diamond sharpening with two different sharpening grits.
The yellow surface consists of titanium and aluminum nitride which greatly prolongs the life of the sharpener. The rough side (44 microns) is used to recover more damaged cutting edges, while the fine side (25 microns) is used for precision sharpening.
For cleaning, use dish soap and warm water.
Like all diamond sharpeners, this whetstone is a little rough at first, but gets smoother after a period of use.
Dimensions of the diamond part:
10 cm x 2 cmTotal open size with plastic handle:
22 cmClosed size:
12 cm x 3 cm
Weight: 67 grF-FDD -
Fallkniven - PXLey Folding Knife - Elmax - Elforyn - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Elforyn with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steelF-PXLey -
Fallkniven - PXLbl Folding Knife - Elmax - Black Micarta - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steelF-PXLbm -
Fallkniven - P3Gic Folding Knife - Desert Ironwood - knife
Intended use: sporting
Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -F-P3Gic -
Fallkniven - RL1EY - Elforyn - Folding Knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010.
Intended use: collectible/sporty
Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon
Notes: -F-RL1EY -
Fallkniven - RL1di knife - Desert Ironwood - knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.
Intended use: collection / sports
Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:F-RL1DI -
Fallkniven - Taiga Forester - TF1 - SanMai CoS Steel - Desert Ironwood - knife
Intended Use: Hiking / Hunting / Collection
Production type: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade Treatment: Satin finish
Handle: Desert Ironwood
Blade Length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 230g.
Sheath: zytel
Notes: -F-TF1Z -
Fallkniven - Taiga Forester - TF2 - SanMai CoS Steel - thermorun - knife
Intended use: Hiking / Hunting
Type of production: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 185g.
Scabbard: zytel
Notes: -F-TF2Z -
Fallkniven - Taiga Hunter knife - TH - SanMai CoS Steel - thermorun - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.If you look at function and most value for money, the rubber-handle Taiga blades should be preferred. Regardless of the weather and wind, the rubber handle gives a really good grip and when it comes to the steel properties they are of course as good as the knives with wooden handles.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -F-TH2Z -
Fallkniven - Taiga knife SK2L - SanMai CoS Steel - ironwood - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.As shown in the design, TH1 is a handmade knife with a handle in the very exclusive desert ironwood (lat. Olneya tesota). This species is not listed in CITES Annexes or the IUCN Red List of Endangered Species and is therefore legal to use. Like all natural materials, it varies in texture and color, making each knife an individual creation. A beautifully veined pattern may look attractive but a straight, patterned handle is actually stronger. Desert ironwood, which grows in the southwestern United States, has a somewhat peculiar quality – it is heavier than water, its density is 1.2 kg/dm³ which means it will sink. If you want to maintain or even increase the luster in the wood, treat it with log oil, furniture oil, bench oil or other type of wood oil containing linseed oil. The fact that the blade goes full width through the handle (so-called full tang blade) results in a very strong and reliable construction and gives a comfortable weight to the knife.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -F-TH1Z -
Fallkniven - Embla knife SK2L - SanMai CoS Steel - ironwood - knife
Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -F-SK2L -
Fallkniven - S1x Survival Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1X -
Fallkniven - S1xb Survival Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1XB -
Fallkniven - MB - Modern Bowie - Satin SanMai CoS - knife
Destination of use: Hiking / Hunting
Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box, ABS sealed cushion with fallkniven logos, Fallkniven DC4 sharpening stone with leather caseF-MB -
Fallkniven - Erna SK18 - BBQ Chef 18cm - professional kitchen knife
Recommended use: Barbecue, Vegetable, Raw Meat, Fish
Steel: Stainless Laminate CoS 60 HRC
Production Lama Japan
Overall length: 292mm.
Blade length: 180mm.
Blade thickness: 2.5mm.
Type of sharpening: flat
Type of construction: laminated with riveted handle
Handle: birch burl
Maintenance: not dishwasher safe
Packaging: bag with zip in leather and leather sheath marked FallknivenF-SK18 -
Fallkniven - FS3 FlipStone - Affiatore Ceramic and Diamond Pocket
Stone pocket , for sharpening , with a side ceramic 1 micron ( grain 15000 ) and with one side to the diamond 25 micron ( 600 grit ) . It has the shape of a folding knife , with quick-release mechanism with safety lock to prevent accidental opening . The closure is done by pressing and releasing the button opening .
Never before has it been so nice sharpen your knife! Not only does the new FlipStone is fun to hold and handle, but these stones for sharpening ceramic and diamond are able to create an incredible on any kind of knife sharpening .
The side of the diamond has a treatment TAN ( Alumina Titanium Nitride ) while the ceramic side is made from synthetic sapphires . Both materials are extremely durable and long lasting and come in 8 and 10 hardness on the Mohs scale ; both are able to remain perfect and long lasting , so as to ensure the best possible result , also of special steels or sintered with extremely high hardness .
The stones are joined together using special adhesives 3M and can not be separated in any way . They can be used dry or with a little water and soap or acuqa to keep the surfaces clean. If at first glance there may appear to be excessively rough , do not worry gradually become smooth with use and will improve more and more as the years to come.
Stone Size : 25x65 mm .
Open length : 165 mm.
Closed length : 98 mm .
Handle: Zytel
Accompanied by spacers, spring replacement and a handy wrench to unscrew the handles . Weights and dimensions, ideal to take with you on a trip if for quick but effective sharpening .
Quality level : HighF-FS3 -
Fallkniven - DC521 - Whetstone to Diamond and Ceramic
Sharpening stone benches, with side diamond medium-grained and fine-grained ceramic side.
Dimensions of 55mm in width, 210mm in length and 6mm in thickness
Great for sharpening knives and kitchen knives sports a high level: the diamond allows a quick sharpening, suitable for everyday use on sports knives and hiking, while the ceramic allows you to work slowly ensuring a finish more accurate, especially on kitchen knives.
F-DC521 -
Fallkniven - A1 BLK - knife
Intended Use: Tactical / Military
Blade: full tang stainless steel San-Mai VG-10/420J2 59HRC coated black Ceracoat 8H
Handle: Kraton
Blade length: 160mm.
Blade thickness: 6mm.
Length closed:-mm.
Total length: 280mm.
Balance: advanced to 0.5cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Zytel tactical
Notes:F-A1BLZ -
Fallkniven - A1 Zytel knife - coltello
Destinazione d'uso: sportivo/caccia/militare
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC
Manicatura: Kraton
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 280mm.
Bilanciatura: avanzata a 0.5cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in zytel
Note:F-A1Z -
Fallkniven - A2 - knife
Survival knife - News from the Swedish company larger than the A1 model.
Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.
- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheathF-A2 -
Fallkniven - DC3 - Affiatore Ceramica e Diamante - coltello
Pietra a secco per affilatura con un lato in ceramica grana 6000 e con un lato al diamante da 25 micron (grana 600) a grana fine. Dimensioni di 25x75 mm.
E' accompagnata da un comodo e robusto astuccio in cuoio nero ed è l'ideale per peso e dimensione da portare sempre con se in escursione per rapide ma efficaci affilature da campo.
Livello qualitativo: ottimoF-DC3 -
Fallkniven - DC4 - Sharpener Ceramic and Diamond - Stone
Dry stone for sharpening ceramic grain with one hand and with one side to the 6000 diamond 25 micron (600 grit) to fine-grained. Size of 32x100 mm.
And 'accompanied by a convenient and robust black leather case and is the ideal size and weight to carry always with you on a hike to quick but effective sharpening field.
Quality: very good
F-DC4 -
Fallkniven - F1 BLK - knife
Intended Use: Tactical / Military / Hunting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2 with black Teflon coating
Handle: It Thermorun
Blade length: 105mm.
Blade Thickness: 4.5mm.
Closed Length: - mm.
Total length: 215mm.
Balance: back to 2.5 cm from the lower branch of the guard
Weight: 150g.
Closing: -
Clip: -
Sheath: Kydex
Notes: knife official Swedish Air Force pilots since 1995F-F1BL -
Fallkniven - NL1 - Thor - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 254mm.
Blade Thickness: 7mm.
Length closed:-mm.
Total length: 385mm.
Balance: advanced to 3.5 cm. the branch of lower guard
Weight: 520g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL1 -
Fallkniven - NL2 - Odin - knife
The Fallkniven Odin (first in importance among the Celtic gods) is the second model after Thor in order of size, the beautiful Northern Light series.
The knife is handmade using only top quality materials.Intended Use: collection / Survival
Type of production: Industrial
Production Blade: Japan
Blade: VG10 (HRC 59)
Treatment Lama: -
Handle material: Polymer
Blade length: 200mm.
Blade thickness: 6.5 mm.
Length closed: -
Total length: 325mm.
Thick when closed: -
Balance: -
Weight: 380g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:F-NL2 -
Fallkniven - NL3 - Njord - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 150mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 268mm.
Balance: advanced to 0.5 cm. the branch of lower guard
Weight: 280g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL3 -
Fallkniven - NL4 - Frey - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 244mm.
Balance: backward to 1 cm. the branch of lower guard
Weight: 190g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL4 -
Fallkniven - NL5 - Idun - knife
Fallkniven Sweden - Idun (Celtic god of fertility and youth) is a very compact with excellent finishes, perfect for use of hunting - The knife is handmade using only top quality materials
Intended Use: collection / Survival
Type of production: Industrial
Production Blade: Japan
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 170g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:F-NL5 -
Fallkniven - NL5cx - Idun Damasco - coltello
Destinazione d'uso: collezione/caccia
Tipo di produzione: industriale
Lama: in acciaio damasco "Cowry-X" 64HRC
(3%C 20%Cr 1%Mo 0.3%V)
Trattamento Lama: -
Manicatura: anelli di cuoio con guardia e cap in nickel silver
Lunghezza lama: 100mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Bilanciatura: -
Peso: 180g.
Chiusura: -
Clip: -
Fodero: cucito a mano, in cuoio
Note: -F-NL5CX -
Fallkniven - PHK - knife
Intended Use: Sport / Hunting
Type of production: Industrial
Production Blade: Japan
Blade: 3G stainless steel, three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Blade:
Handle: Thermorun And with stainless guard
Blade length: 127mm.
Blade thickness: 5mm.
Length closed -
Total length: 240mm.
Thick when closed: -
Balance: backward, to 1.5cm from the guard
Weight: 194g.
closing time:
Clip: -
Sheath: Zytel
Packaging: cardboard box with logos Fallkniven
Note: Each piece is numberedF-PHK -
Fallkniven - S1 knife Black Zytel - coltello
Destinazione d'uso: sportivo/caccia/militare
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC con rivestimento nero CeraCoat 8H
Manicatura: Thermorun E
Lunghezza lama: 130mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 247mm.
Bilanciatura: in corrispondenza del ramo di guardia inferiore
Peso: 190g.
Chiusura: -
Clip: -
Fodero: Zytel
Note:F-S1BLZ -
Fallkniven - S1 Zytel - knife
Intended Use: Sport / Hunting / Military
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: It Thermorun
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 247mm.
Balance: at the lower branch of the guard
Weight: 190g.
Closing: -
Clip: -
Sheath: Zytel
Notes:F-S1Z -
Fallkniven - SK1 Jarl Betulla - fodero in cuoio - coltello
Destinazione d'uso: Caccia
Tipo di produzione: industriale
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Trattamento Lama: -
Produzione Lama: Giappone
Manicatura: Legno di Betulla
Lunghezza lama: 100mm.
Spessore della lama: 4,5mm.
Lunghezza totale: 210mm.
Bilanciatura: arretrato di 1 cm dal ramo di guardia
Peso: 134g.
Fodero: Cuoio
Note: -F-SK1 -
Fallkniven - SK3 Juni Birch - leather sheath - knife
Intended Use: Hunting
Type of production: industrial
Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Lama: -
Production Blade: Japan
Handle: Birch Wood
Blade length: 69mm.
Blade Thickness: 3mm.
Total length: 145mm.
Balance: backlog of 1 cm from the branch guard
Weight: 54g.
Sheath: Leather
Notes: -F-SK3 -
Fallkniven - TK3ic knife - Cocobolo - coltello
Fallkniven Tre Kronor TK3
La linea "Tre Kronor" fonde le più moderne tecnologie martensitiche con le antiche radici della famiglia reale svedese.
Questi coltelli, infatti, sono gli unici a potersi fregiare del simbolo reale delle tre corone poste sulla lama e sulla splendida confezione in legno che contiene il coltello ed il fodero.
L'acciaio laminato utilizzato è attualmente uno dei migliori acciai industriali in commercio ed è composto da una lamina interna in SGPS da polvere, acciaio già utilizzato per il modello U2, a 62HRC accopiato a due guancette esterne in VG2. I coltelli rivelano così eccezionali doti di taglio, penetrazione e tenuta del filo.
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Manicatura: Legno di Cocobolo
Lunghezza lama: 70 mm.
Spessore della lama: 2.5 mm.
Lunghezza totale: 165 mm.
Peso: 100 g.
Chiusura: Backlock
Fodero: Nero, in corduraF-TK3ic -
Fallkniven - FH9 Braun Micarta - Knife
Type of production: Industrial
Blade: 3G laminated steel three-layer (VG2 SGPS and "Super Gold Powder Stainless Steel" to 62 HRC)
Blade treatment: -
Production Lama: Sweden
Handle: Stainless Steel 420J2 and brown micarta
Blade length: 67mm.
Blade Thickness: 3mm.
Closed Length: 90mm.
Overall length: 157mm.
Weight: 90g.
Closing: Lockback
Clips: stainless steel
Notes: -F-FH9 -
Fallkniven - Phantom - Elmax & Desert Ironwood 40th Anniversary Set - Limited Edition - knife
Fällkniven AB celebrates its 40th anniversary in the international knife market with The Fällkniven Phantom model, a folding knife that is not only aesthetically appealing but also functional, with well-balanced proportions between handle and blade.
The blade uses advanced Swedish powdered steel (Elmax from Uddeholm), equipped with a convex edge for maximum performance. The handle is made of ironwood harvested in the southwestern United States, known for its density (1.2 kg/dm³) that makes it heavy and strong enough not to float.
The design of the Phantom follows the Scandinavian principle of "Form follows function," favoring clean, classic lines without superfluous details.
The Phantom comes in a gift box with a multifunctional leather case with a belt clip that can be worn either horizontally or vertically.
Intended use: sports/hunting/utility
Blade: 61/62HRC Elmax stainless steel, satin-finished, with convex sharpening
Handle: stainless steel and desert ironwood
Blade length: 73mm.
Blade thickness: 3mm.
Length when closed: 101mm.
Total length: 174mm.
Weight: 77g.
Locking system: Liner Lock
Sheath: leather, with metal clip
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard caseF-PHanniv -
Fallkniven - F1 Elmax - 40th Anniversary Set - Limited Edition - knife
Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.
The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.
Intended use: allrounder utilityBlade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpenerF-F1anniv -
Fallkniven - H1 Zytel - Elmax & Thermorun - Swedish hunting knife
The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.
The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!
Intended use: huntingType of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -F-H1zElmax -
Guardian Tactical Usa - Deltrix Tactical Folder knife - PRIVATE COLLECTION - CF DK - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to 2015
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: original, in cardboard with Guardian Tactical logos
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratory100% USA Guardian Tactical, an American company specializing in the design and manufacture of tactical knives. Guardian Tactical combines obsessive and partly artisan attention with the use of modern and technologically advanced machinery in order to obtain almost perfect products with extremely high quality performance.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: CPM-154CM stainless steel
Blade treatment: Dark StoneWash
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 225mm.
Thick when closed: 18mm
Balancing: -
Weight: 162g.
Closure: Frame Lock
Clip: removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Guardian Tactical logos
Design: -AP-DeltrixDK -
Fallkniven - R2 Scout Survival - Elmax - knife
Intended use: Hiking / Utility
Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex typeF-R2Z-Scout -
Fallkniven - A1xb Expedition Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -F-A1XB -
Fallkniven - A1x Expedition Knife - outdoor knife - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -F-A1X -
Guardian Tactical Usa - Helix Tactical Folder G10 OD Green - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-154CM
Treatment Lama: Stone Washed
Handle: G10 OD Green
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 135mm.
Overall length: 225mm.
Thick when closed: 18mm
Balancing: -
Weight: 170g.
Closure: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Guardian Tactical
Design: -GT-33211 -
RH Preyda - Arkansas Translucent Ultrafine - SMALL - Natural Stone to Sharpen
Natural stone for sharpening, oil, type Arkansas Translucent Ultrafine
Made in USA, Made of Novaculite of the highest quality and cleverly cut at the artisan level, it guarantees very high performances both in sharpening and polishing. Contained in a practical wooden box, it is not fastened or glued and is inserted into a comfortable silicone non-slip support.
Ideal for rewinding of free razors or for cleaning blades.
Dimensions: 15 x 5 x 1.17 cm.
Quality level: Very highARK30062 -
Nepal kukri - Sirupate 15 - WITH ENGRAVING - wooden handle - Nepali Knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood
Finishes: Brass
Blade length: 250 mm.
Blade thickness: 10 mm.
Total length: 380 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 468g. (602g with scabbard)
Sheath: in leather and wood
Notes: Original Nepalese knife entirely handmadeSIRU-15-INCISO -
Artisan Kukri - Long 18 - WITH ENGRAVING - Nepalese knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmadeL18-INC -
RH Preyda - Arkansas Water Stone #6000/#1000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30946 -
RH Preyda - Arkansas Water Stone #8000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30934 -
RH Preyda - Arkansas Water Stone #6000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30933 -
RH Preyda - Arkansas Water Stone #3000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30932 -
RH Preyda - Arkansas Water Stone #1000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30931 -
RH Preyda - Arkansas Water Stone #400 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30930 -
RH Preyda - Arkansas Translucent Ultrafine - LARGE - Natural Stone to Sharpen
Natural stone for sharpening, oil, type Arkansas Translucent Ultrafine
Made in USA, Made of Novaculite of the highest quality and cleverly cut at the artisan level, it guarantees very high performances both in sharpening and polishing. Contained in a practical wooden box, it is not fastened or glued and is inserted into a comfortable silicone non-slip support.
Ideal for rewinding of free razors or for cleaning blades.
Dimensions: 20 x 5 x 1.17 cm.
Quality level: Very highARK30063 -
Guardian Tactical - Conix - G10 Blackwashed - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Blackwashed
Handle: G10 and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0006 serial number imprinted on the clipGT-81611 -
Guardian Tactical - Conix - G10 Stonewashed - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Stone Washed
Handle: G10 and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0019 serial number imprinted on the clipGT-81511 -
Guardian Tactical - Conix - Carbon Fiber Stonewashed - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Stone Washed
Handle: Carbon Fiber and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0027 serial number imprinted on the clipGT-82511 -
Guardian Tactical - Conix - Carbon Fiber Two Tone - knife
Intended use: Tactical / Collective
Type of production: Semi-Industrial
Country of Origin: Pennsylvania - USA
Blade: Stainless steel CPM-154CM
Blade Treatment: Dual Tone - Stone Washed + PVD
Handle: Carbon Fiber and Solid Aluminum
Blade Length: 90mm.
Blade thickness: 4mm.
Closed length: 121mm.
Overall length: 206mm.
Closure thickness: 16mm.
Weight: 132g.
Opening: Carson Flipper
Washers: steel, with ball bearings
Locking system: Sub Framelock in titanium
Clip: solid titanium, removable
Packing: Carton box with Guardian Tactical USA logos
Notes: Numbered edition with # 0024 serial number imprinted on the clipGT-82211 -
Nepal kukri - Sirupate 16 wooden handle - Knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Manicure: wood
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9.4 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 110 mm.
Weight: 426g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handne-siru-16 -
BenchMark - Training Bali - BM006 - Training knife
*** ATTENTION: THE PAYMENT OF THIS ARTICLE MAY NOT 'BE MADE WITH PAYPAL ***
Intended Use: Training
Type of production: Industrial
Country of Origin: USA
Blade: stainless steel 420
Blade treatment: -
Handle: Full steel washers steel
Blade length: 95mm.
Blade thickness: 2.5mm.
Closed Length: 130mm.
Overall length: 230mm.
Thick when closed: 7.5mm
Weight: 165g.
Closed: T-latch
Packaging: Cardboard box with BenchMark logos
Notes: solid, sturdy, with hinged and riveted handles on the blade, great for making trick since it has the same weight, mass and balance of a real knife.BE-BM006 -
Nepal kukri - Sirupate 17 wooden handle - knife
Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la mainne-siru17 -
Kukri nepal - Nepal Army 007 horn handle - knife
Blade: Carbon Steel
Handle: horn
Blade length: 225 mm.
Blade Thickness: 10 mm.
Overall length: 350 mm.
Weight: without covers g. 375 - g with sheath. 504
Sheath: leather and wood, handmade
Notes: every knife and 'entirely handmade in Nepal and also includes two small knives.ne-army-c -
Kukri nepal - Dhankute 16 wooden handle 010 - Knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: Wood
Finishes: Brass
Blade length: 270 mm.
Blade Thickness: 10 mm.
Overall length: 400 mm.
Karda: 105 mm.
Chakmak: 105 mm.
Weight: 434g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by handne-dhan16 -
Nepal kukri - Sirupate 15 wooden handle 009 - Knife
Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la mainne-sir-15