Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.

Blade: ZDP-189 stainless steel at 66.7HRC
Handle: anodized titanium and Dark Matter Gold carbon fiber
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 138g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Accompanied by warranty certificate with full technical specifications

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory



The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.


The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.

Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.

Intended Use: Collection/Sportsman

Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpening

Fans and collectors of the Osborne family, one of Benchmade's most iconic models, will notice the classic inverted blade shape paired with a brand new pattern on the Damasteel® blade. Called Ægir ™, the motif is inspired by Norse mythology and takes design cues from the Baltic Sea. The new design has carbon "Arctic Storm" grips with flowing blue accents and gold-plated floating rear spacers that give this limited edition Osborne a cool look, like the icy waters off the Swedish coast. This one of a kind knife completes the 940 Osborne family with an eye-catching style to augment the EDC collection.

Intended use: Collection / EDC

Type of production: Industrial
Country of production: USA
Blade: Damasteel steel
Blade finish: Damascus
Handle: Arctic Storm Fat Carbon w / Aqua Anodized Bolsters
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed Length: 97.5mm.
Total length: 172mm.
Thick when closed: 10mm.
Weight: 63g.
Closure: AXIS Lock
Clip: Removable and reversible, in stainless steel
Packaging: "Gold Class" cardboard box with Benchmade logos
Notes: Limited Edition 2022, each piece is numbered on the blade

Intended use: Tactical / Collection

Type of production: Industrial
Country of production: USA
Blade: Reverse Tanto in CPM-S90V steel (59-61 HRC)
Blade finish: DLC
Handle: DLC Titanium
Blade length: 86mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 200mm.
Thick when closed: 10.4mm
Weight: 95g.
Closure: AXIS Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: design by Osborne - Limited Edition 2000 pieces

Intended use: Tactical

Type of production: Industrial
Blade production: USA
Blade: Reverse Tanto in CPM-S90V steel (59-61 HRC)
Blade treatment: -
Handle: Titanium
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 200mm.
Thick when closed: 10.4mm
Balancing: -
Weight: 95g.
Closing: AXIS Lock
Clip: Removable and reversible, in stainless steel
Sheath: -
Packaging: Cardboard box with Benchmade logos
Notes: design by Osborne - Limited Edition 2000 pieces

Gold Edition 2019 Benchmade - Special edition of the Griptilian limited to 200 pieces

Intended use: Collection

Blade: custom Damasteel Fjåril (Swedish for butterfly) Pattern
Country of production: USA
Handle: Gray / blue G10
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 205mm.
Weight: 118g.
Closure: Axis Lock
Clip: removable and reversible in stainless steel
Sheath: -
Packaging: cardboard box with Benchmade logos
Notes: Design by Mel Pardue

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 028 - Date of production April 23, 2019

Intended use: Collection

Type of production: Industrial
Country of production: USA
Blade: Damasteel stainless steel dam 58 / 60HRC with pattern of Munin type
Blade treatment: -
Handle: in carbon fiber "ghost"; blue C-Tek insert; blue anodised titanium spacers; screws with PVD treatment
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thick when closed: 10.5mm.
Weight: 59g.
Closure: AXIS Lock
Clip: Removable and reversible, in stainless steel
Sheath: Black fabric bag with golden Benchmade logos
Packaging: "Gold Class" cardboard box with Benchmade logos - Black casket with rubber finish and Benchmade logos in gold color - Certificate of guarantee and authenticity
Notes: Limited Edition 2019 - each piece is numbered on the blade, box and certificates

Intended use: Collection

Type of production: Industrial
Lama production: USA
Blade: damascus inox by Damasteel with Loki design
Blade treatment: -
Handle: marbled carbon fiber with mother-of-pearl inserts
Blade length: 82mm.
Blade thickness: 3.5mm.
Length closed: 101mm.
Total length: 186mm.
Thick when closed: 14mm.
Weight: 98g.
Closure: AXIS Lock
Clip: Removable and reversible, in stainless steel
Sheath: Black fabric bag with golden Benchmade logos
Packaging: "Gold Class" cardboard box with Benchmade logos - Black casket with rubber finish and Benchmade logos in gold color - Certificate of guarantee and authenticity
Notes: Limited Edition 2018 - each piece is numbered on the blade, box and certificates

Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.

Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.

Lama: acciaio laminato con guance esterne in VG10 e tagliente in ZDP-189 a 66/67HRC con finitura a specchio
Manicatura: Titanio anodizzato
Lunghezza lama: 105 mm.
Spessore della lama: 3,8 mm.
Lunghezza totale: 190 mm.
Peso: 159g.
Chiusura: Frame Lock con battente in acciaio inox
Clip: Deep pocket, amovibile, in acciaio inox SUS420J2 a 50HRC
Note: Design by Sinkevich - accompagnato da certificato di garanzia con specifiche tecniche dettagliate

Kukri Artisan - Panawal horn - Nepalese knife

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade thickness: 9mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 482g.
Sheath: wood and leather
Notes: Original Nepalese knife made entirely by hand

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade Thickness: 8mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 434g.
Sheath: wood and leather decorated
Notes: Knife Original Nepalese entirely handmade - 7 accessories included in the sheath