Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Rockstead - HIGO II X-FCF - ZDP-189 & Dark Matter Gold Carbon Fiber - folding knife
Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.
Blade: ZDP-189 stainless steel at 66.7HRC
Handle: anodized titanium and Dark Matter Gold carbon fiber
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 138g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Accompanied by warranty certificate with full technical specificationsRO-HIGIIX-ZDPDMG -
Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-SHIN-ZDP -
Rockstead - Hizen - DLC YXR7 & Duralumin - Folding Knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -RO-HIZ-DLC -
Rockstead - Hizen - ZDP-189 & Duralumin - Folding Knife made in Japan
Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-HIZ-ZDP189 -
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.
Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HIMHDLC-CP -
Rockstead - 2010 Higo-ST Serial #005 - YR7 HPC & Duralumin - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.
Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HISTHPC-CP -
Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan
Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.
Intended Use: Collection/Sportsman
Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpeningR-CHIZDP -
Rockstead - Higo II F-HTI-ZDP - Titanium ZDP-189 - knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.5HRC
Blade treatment: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 12.2mm.
Weight: 136g.
Opening: through ambidextrous pin
Washers: in brass
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 096 - Date of production 05 July 2019HIGOIIHTIZ -
Rockstead - Shin knife DLC - YXR7 - knife
This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.
Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.RS-SHIN-B -
Case Cutlery - Stockman 3 blades Folding Knife - 2801 - knife
W.R. Case & Sons Cutlery Company was created at the beginning of the century, at a time when pocket knives were as indispensable as a watch. Over the years the company has established itself as a leading company in the market launch of new materials and innovative designs.
The company's roots date back to 1889, when enterprising brothers, William Russell (W.R.), Jean, John and Andrew, in the Case family began selling craft knives from the back of a van in northern New York. In January 1900, the brothers formed the Case Brothers Cutlery Company, thus founding the first family brand Case.
J.R. Case, which he called the company with the name of his father, W.R., formed the W.R. Case & Sons in the form in which it is known today. When the company moved to Bradford, Pennsylvania in 1905, the four Case brothers had made their family brands the most respectable names in cutlery in America.
At the beginning of World War I, the government appealed to the Case for the production of military knives for American fighters. During the flight of the "Molly Brown" in 1965, astronauts Gus Grissom and John Young used special Case knives in the NASA space mission. Case has garnered famous and avid collectors like former US President Dwight D. Eisenhower and country music star Randy Travis.
Intended use: sports / collection
Type of production: Semi-Industrial
Lama production: USA
Blade: 3 blades - stainless steel
Blade treatment: -
Handle: Blue Navy bone
Blade length: 65mm.
Blade thickness: 2mm.
Closed length: 90mm.
Total length: 160mm.
Thick when closed: 13mm
Balancing: -
Weight: 64g.
Closure: retention
Clip: -
Sheath: -
Packaging: cardboard box with Case logos
Note: -CA-2801 -
Rockstead - Higo II X-CF-ZDP - Carbon Fiber ZDP-189 - knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 028 - Date of production April 23, 2019HIGOIIXCF -
Rockstead - Chou HPC - Black Silk - neck knife
With the Rockstead brand, of Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently being marketed.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years, to the extent that they have been awarded the highest recognition among the artisanal cutlers in Japan, they prove to be exceptional both in cutting, penetration and thread strength and in terms of innovation for the materials used and for construction techniques.
Blade: Hitachi YXR7 65HRC steel with HPC titanium cover
Handle: interweaving in silk tied by hand
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: neck, in Kydex
Notes: Accompanied by silk bag and certificate of guarantee with technical specifications.4069BLACK -
Nepal kukri - Sirupate 15 - WITH ENGRAVING - wooden handle - Nepali Knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood
Finishes: Brass
Blade length: 250 mm.
Blade thickness: 10 mm.
Total length: 380 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 468g. (602g with scabbard)
Sheath: in leather and wood
Notes: Original Nepalese knife entirely handmadeSIRU-15-INCISO -
Artisan Kukri - Long 18 - WITH ENGRAVING - Nepalese knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmadeL18-INC -
Nepal kukri - Sirupate 16 wooden handle - Knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Manicure: wood
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9.4 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 110 mm.
Weight: 426g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handne-siru-16 -
Case Cutlery - Trapper Yellow - CA00161 - Knife
Intended Use: sports / collection
Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and ABS
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -CA00161 -
Rockstead - TEI DLC - 65hrc - knife collection
This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.
Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: FolderRO-TEI -
Rockstead - Chou HPC Ironwood - Neck Knife - Knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Use: utility / Neck KnifeProduction Country: Japan
Blade: stainless Hitachi YXR7 to 65HRC
Finish: HPC titanium
Handle: Ironwood
Blade length: 45 mm.
Blade thickness: 4 mm.
Overall length: 120 mm.
Weight: 60 g.
Sheath: neck, Kydex thermoformed
Notes: Accompanied by a certificate of guarantee with technical specifications4069IW -
Nepal kukri - Sirupate 17 wooden handle - knife
Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la mainne-siru17 -
Kukri nepal - Nepal Army 007 horn handle - knife
Blade: Carbon Steel
Handle: horn
Blade length: 225 mm.
Blade Thickness: 10 mm.
Overall length: 350 mm.
Weight: without covers g. 375 - g with sheath. 504
Sheath: leather and wood, handmade
Notes: every knife and 'entirely handmade in Nepal and also includes two small knives.ne-army-c -
Kukri nepal - Dhankute 16 wooden handle 010 - Knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: Wood
Finishes: Brass
Blade length: 270 mm.
Blade Thickness: 10 mm.
Overall length: 400 mm.
Karda: 105 mm.
Chakmak: 105 mm.
Weight: 434g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by handne-dhan16 -
Nepal kukri - Sirupate 15 wooden handle 009 - Knife
Lame: acier au carbone
Conformation: Dui Chirra
Kauri: Découverte
Aunlo-Bal: des motifs en noir et or gravé d'un dessin d'un soleil
Poignée: Bois
Finitions: laiton
Longueur de la lame: 225 mm.
Épaisseur de la lame: 8,5 mm.
Longueur totale: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Poids: 350g.
Gaine: cuir et bois
Notes: couteau d'origine népalaise fait entièrement à la mainne-sir-15 -
Kukri nepal - Balance 006 wooden handle - knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: engraved patterns in black and gold with a drawing of a sun
Handle: Wood
Finishes: Brass
Blade length: 225 mm.
Blade Thickness: 8.5 mm.
Overall length: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 350g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by handne-bal-l -
Rockstead - SHUN Titanium ZDP-189 by Sinkevich - knife
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: acciaio laminato con guance esterne in VG10 e tagliente in ZDP-189 a 66/67HRC con finitura a specchio
Manicatura: Titanio anodizzato
Lunghezza lama: 105 mm.
Spessore della lama: 3,8 mm.
Lunghezza totale: 190 mm.
Peso: 159g.
Chiusura: Frame Lock con battente in acciaio inox
Clip: Deep pocket, amovibile, in acciaio inox SUS420J2 a 50HRC
Note: Design by Sinkevich - accompagnato da certificato di garanzia con specifiche tecniche dettagliate12431 -
Kukri Artisan - Panawal wood - Nepalese knife
Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Covered
Aunlo-Bal: -
Handle: Wood
Blade length: 230mm.
Blade Thickness: 11mm.
Overall length: 395mm.
Karda: horn length. tot. 12mm.
Chakmak: horn length. tot. 12mm.
Weight: 690g.
Sheath: wood and leather
Notes: Nepalese original knife made entirely by handPANA21 -
Kukri Artisan - Panawal horn - Nepalese knife
Kukri Artisan - Panawal horn - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade thickness: 9mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 482g.
Sheath: wood and leather
Notes: Original Nepalese knife made entirely by handPANA22 -
Kukri Artisan - Ganjawala multipurpose horn 18 - Nepali knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn
Blade length: 200mm.
Blade Thickness: 8mm.
Overall length: 320mm.
Karda: horn length. tot. 6.5mm.
Chakmak: horn length. tot. 6.5mm.
Weight: 434g.
Sheath: wood and leather decorated
Notes: Knife Original Nepalese entirely handmade - 7 accessories included in the sheathGAN18 -
Kukri Artisan - Dhankute Silver - Nepalese knife
Kukri Artisan - Dhankute Silver - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and silver
Blade length: 320mm.
Blade Thickness: 10mm.
Overall length: 440mm.
Karda: length. tot. 6.3mm.
Chakmak: length. tot. 6.3mm.
Weight: ì (774g. Sheath)
Sheath: horn and Nepalese symbols silver
Notes: Original Nepalese knife made entirely by handDHAN2 -
Kukri Artisan - Dhankute 11 "horn - Nepalese knife
Kukri Artisan - Dhankute 11 "horn - Nepalese knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: overcast
Aunlo-Bal: engraved pattern black and gold
Handle: horn and brass
Blade length: 220mm.
Blade Thickness: 8mm.
Overall length: 340mm.
Karda: horn length. tot. 65mm.
Chakmak: horn length. tot. 65mm.
Weight: 434g.
Sheath: Nepalese brass horn with symbols
Notes: Original Nepalese knife made entirely by handDHAN11 -
Kukri Artigianale - Bahadur Gripper corno - coltello nepalese
Lama: Acciaio al carbonio
Conformazione: Lama full tang
Kauri: Scoperto
Aunlo-Bal: singola linea nera incisa
Manicatura: Corno nero di bufalo
Finiture: -
Lunghezza lama: 250 mm.
Spessore della lama: 6 mm.
Lunghezza totale: 375 mm.
Peso: 680g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a manoBAHA20 -
Kukri Artisan - Chainpure 13 - Nepalese knife
Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.
Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmadeCHAIN13 -
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handCHAIN15 -
Case Cutlery - Trapper Nacre 00640 - knife
Trapper Nacre 00640 - knife
Intended Use: sports / collection
Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -CA260 -
Case Cutlery - Mini Trapper Santa Fe 'Turquoise - craft knife
Mini Trapper Santa Fe 'Turquoise - craft knife
Intended Use: sports / collection
Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -05142 -
Case Cutlery - Mini Trapper Santa Fe 'Turquoise - craft knife
Mini Trapper Santa Fe 'Turquoise - craft knife
Intended Use: sports / collection
Production Type: Semi-Industrial with craftsmanship in the handle
Production Lama: U.S.A.
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver, wood, turquoise, red jasper
Blade length: 68mm.
Blade thickness: 2 mm.
Closed Length: 83mm.
Overall length: 153mm.
Thick when closed: 14mm
Balancing: -
Weight: 70g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -case-mtt -
Case Cutlery - Trapper Nacre 00640 - knife
Trapper Nacre 00640 - knife
Intended Use: sports / collection
Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel silver and mother of pearl
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 112g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with black logos Houses
Notes: -00640 -
Case Cutlery - Trapper John Deere Green - 05862 knife
Case Cutlery - Trapper John Deere Green - 05862 knife
Intended Use: sports / collection
Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Bone Green
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green John Deere logos Houses
Notes: -05862 -
Case Cutlery - Trapper Dark Red - CA00646 knife
Trapper Dark Red - CA00646 knife
Intended Use: sports / collection
Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Red Bone
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -00646 -
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Kukri Artisan - Ceremonial Long Aluminum 027 - knife
Blade: Carbon steel fully engraved with motifs of dragons (warning: may vary from those shown in photos)
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: aluminum
Finishes: Brass
Blade length: 455 mm.
Blade Thickness: 12 mm.
Overall length: 650 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Weight: 1675g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by handKU027 -
Rockstead - SAI Titanium ZDP-189 - knife
Rockstead - SAI Titanium ZDP-189 - knife
Blade: ZDP-189 in 66.8HRC
Handle material: titanium
Blade length: 80 mm.
Blade Thickness: 3.7 mm.
Overall length: 190 mm.
Weight: 140g.
Closure: liner lock
Sheath: Black leather
Notes: Accompanied by a certificate of guarantee with the technical specifications.SAI -
Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife
Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife
With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: ZDP-189 in 66.8HRC
Handle material: stainless steel and wood SUS420J2 Ironwood
Blade length: 90 mm.
Blade Thickness: 3 mm.
Overall length: 215 mm.
Weight: 133g.
Lock: Frame Lock with swing SKD11 to 61HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.10887 -
Rockstead - Chu DLT - knife
Rockstead - Chu DLT - knife
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: Stainless steel with 64HRC Hitachi YXR7 to cover DLT571 3micron
Handle: in green paracord
Blade length: 120mm.
Blade Thickness: 6mm.
Overall length: 2150mm.
Weight: 284g.
Balancing: 1cm back from the lower branch of the guard
Sheath: Leather
Note: Product is out of printChu002 -
Kukri Artigianale - World War II Gurkha wood knife
Kukri - World War II Gurkha
Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).
Lama: Acciaio al carbonio
Manicatura: Legno - ATTENZIONE, trattandosi di un prodotto artigianale la colorazione del manico può variare rispetto al modello fotografato
Lunghezza lama: 250 mm.
Spessore della lama: 11 mm.
Lunghezza totale: 405 mm.
Peso: -- g.
Fodero: in cuoio con trattamento camouflage e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.3598C -
Case - American Bowie Hunter 19USA92 - knife
American Bowie Hunter 19USA92 - knife
Intended Use: Sport / collection / Hunting
Production Type: Semi-Industrial edition collection of 1992 - part one
Blade Production: USA
Blade: AUS-8 stainless steel
Handle: Black synthetic
Blade length: 240mm.
Blade thickness: 4mm.
Overall length: 360mm.
Balancing: Advanced 2.5 cm
Weight: 550g.
Sheath: Black Leather
Packaging: cardboard box with logos Case7197 -
Case - BlackHorn Nero - coltello
W.R. Case & Sons Cutlery Company è stata creata a inizio secolo, in un tempo in cui i coltelli tascabili erano indispensabili tanto quanto un orologio. Nel corso degli anni l'azienda si è affermata come una azienda leader nel lancio sul mercato di materiali nuovi e design innovativi.
Le radici dell'azienda risalgono al 1889, quando dei fratelli intraprendenti, William Russell (W.R.), Jean, John e Andrew, nella famiglia Case iniziarono a vendere coltelli artigianali dal retro di un furgone nella parte settentrionale dello stato di New York. Nel gennaio 1900, i fratelli costituirono la Case Brothers Cutlery Company, fondando così il primo marchio di famiglia Case.
J.R. Case, che chiamò l'azienda con il nome del padre, W.R., costituì la W.R. Case & Sons nella forma in cui oggi è conosciuta. Quando nel 1905 l'azienda si trasferì a Bradford, Pennsylvania, i quattro fratelli Case avevano fatto dei loro marchi di famiglia i nomi più rispettabili della coltelleria in America.
All'inizio della prima guerra mondiale, il governo fece appello alla Case per la produzione di coltelli militari per i combattenti americani. Durante il volo della “Molly Brown” nel 1965, agli astronauti Gus Grissom e John Young utilizzarono coltelli Case speciali nella missione spaziale della NASA. Case ha raccolto ammiratori famosi e avidi collezionisti come l'ex Presidente americano, Dwight D. Eisenhower e la star della musica country, Randy Travis.
Coltello realizzato dalla ditta americana Case negli anni 90
Produttore: Case - USA
lunghezza totale aperto: 24 cm
lunghezza lama: 10,5 cm
peso: 160 gr
tipo acciaio: 440 inox
materiale impugnatura: gomma
note: fodero nero in Nylon7118 -
Case - BlackHorn Verde - coltello
W.R. Case & Sons Cutlery Company è stata creata a inizio secolo, in un tempo in cui i coltelli tascabili erano indispensabili tanto quanto un orologio. Nel corso degli anni l'azienda si è affermata come una azienda leader nel lancio sul mercato di materiali nuovi e design innovativi.
Le radici dell'azienda risalgono al 1889, quando dei fratelli intraprendenti, William Russell (W.R.), Jean, John e Andrew, nella famiglia Case iniziarono a vendere coltelli artigianali dal retro di un furgone nella parte settentrionale dello stato di New York. Nel gennaio 1900, i fratelli costituirono la Case Brothers Cutlery Company, fondando così il primo marchio di famiglia Case.
J.R. Case, che chiamò l'azienda con il nome del padre, W.R., costituì la W.R. Case & Sons nella forma in cui oggi è conosciuta. Quando nel 1905 l'azienda si trasferì a Bradford, Pennsylvania, i quattro fratelli Case avevano fatto dei loro marchi di famiglia i nomi più rispettabili della coltelleria in America.
All'inizio della prima guerra mondiale, il governo fece appello alla Case per la produzione di coltelli militari per i combattenti americani. Durante il volo della “Molly Brown” nel 1965, agli astronauti Gus Grissom e John Young utilizzarono coltelli Case speciali nella missione spaziale della NASA. Case ha raccolto ammiratori famosi e avidi collezionisti come l'ex Presidente americano, Dwight D. Eisenhower e la star della musica country, Randy Travis.
Coltello vintage prodotto dalla ditta americana Case nel 1991
Produttore: Case - USA
lunghezza totale aperto: 20,5 cm
lunghezza lama: 9 cm
peso: 108 gr
tipo acciaio: 440 inox
materiale impugnatura: gomma verde
note: fodero mimetico in Nylon7119 -
Case Cutlery - Multiuso in Madreperla - coltello
Destinazione d'uso: sportivo/collezione
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: 2 Lame - In acciaio inossidabile
Manicatura: madre perla
Lunghezza lama: 65mm.
Spessore lama: 2mm.
Lunghezza chiuso: 90mm.
Lunghezza totale: 150mm.
Spessore da chiuso: 0,9mm
Bilanciatura: -
Peso: 78g.
Chiusura: a ritenzione
Clip: -
Fodero: -
Confezione: scatola rigida
Note: -7198 -
Case Cutlery - Trapper Image XX WWII - CA 5470 knife
Case Cutlery - Trapper Image XX WWII - CA 5470 knife
Intended Use: sports / collection
Production Type: Semi-Industrial
Production Lama USA
Blade: 2 blades - stainless steel
Blade treatment: -
Handle: Nickel and Bone with Scrimshaw
Blade length: 85mm.
Blade thickness: 2 mm.
Length closed: 105mm.
Overall length: 185mm.
Thick when closed: 14mm
Balancing: -
Weight: 110g.
Closure: with detent
Clip: -
Sheath: -
Packaging: cardboard box with green logos Houses
Notes: -7192 -
Crafty Kukri - Jungle knife 001 - knife
Kukri - Gurkha Army
Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).
Blade: Carbon steel
Manicure: black polished horn
Blade length: 265 mm.
Blade thickness: 10 mm.
Total length: 390 mm.
Weight: g.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.3600 -
Kukri Artigianale - Balance in corno 006 - coltello
NOTA: Trattandosi di prodotti artigianali, i prodotti a nostra disposizione potrebbero lievemente differire dal punto di vista estetico rispetto a quello presente in foto
Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: Scoperto
Aunlo-Bal: motivi incisi in nero e oro con un disegno di un sole
Manicatura: Corno nero di bufalo lucidato ed inciso
Finiture: Ottone
Lunghezza lama: 205 mm.
Spessore della lama: 8.5 mm.
Lunghezza totale: 320 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Peso: 350g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano3609 -
Kukri Artigianale - Brown Bond - coltello
Lama: Acciaio al carbonio
Conformazione: Lama concava
Kauri: Scoperto
Aunlo-Bal: singola linea nera incisa
Manicatura: legno inciso
Finiture: Ottone
Lunghezza lama: 275mm.
Spessore della lama: 11mm.
Lunghezza totale: 410mm.
Karda: 125mm.
Chakmak: 125mm.
Peso: 600g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano3618 -
Kukri Artigianale - Cerimoniale Long 027 - coltello
Lama: Acciaio al carbonio completamente incisa con motivi di draghi (attenzione: possono variare rispetto a quanto visualizzato in foto)
Conformazione: Dui Chirra
Kauri: Scoperto
Aunlo-Bal: -
Manicatura: Legno inciso
Finiture: Ottone
Lunghezza lama: 455 mm.
Spessore della lama: 12 mm.
Lunghezza totale: 630 mm.
Karda: 210 mm.
Chakmak: 210 mm.
Peso: 1275g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano3614 -
Kukri Artigianale - Chitlange corno 24 - coltello nepalese
Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: Coperto
Aunlo-Bal: Motivi incisi neri e dorati con una stella a 5 punte
Manicatura: corno
Finiture: Ottone
Lunghezza lama: 325 mm.
Spessore della lama: 11 mm.
Lunghezza totale: 470 mm.
Karda: 115 mm.
Chakmak: 115 mm.
Peso: 562g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano3606 -
Kukri Artigianale - Dhankute 10" coltello nepalese
Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: coperto
Aunlo-Bal: disegno inciso nero e oro
Manicatura: legno e ottone
Lunghezza lama: 260mm.
Spessore della lama: 11mm.
Lunghezza totale: 400mm.
Karda: lungh. tot. 55mm.
Chakmak: lungh. tot. 55mm.
Peso: 414g. (574g. con fodero)
Fodero: in ottone e legno
Note: Coltello originale nepalese interamente realizzato a mano3595 -
Kukri Artigianale - Khotimora Blu Cerimoniale Large - coltello
Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: Scoperto
Aunlo-Bal: motivi incisi in nero e oro ed un disegno di un sole
Manicatura: Corno
Finiture: Ottone
Lunghezza lama: 260mm.
Spessore della lama: 9mm.
Lunghezza totale: 390mm.
Karda: 105mm.
Chakmak: 105mm.
Peso: 540g.
Fodero: in filigrana d'argento, velluto blu e legno
Note: Il Kothimora è un coltello speciale che viene regalato ai gurkha o alle truppe britanniche al momento del ritiro dopo gli anni passati nell'esercito. - Coltello originale nepalese interamente realizzato a mano3615BLU -
Kukri Artigianale - Khotimora Cerimoniale Large coltello
Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: Scoperto
Aunlo-Bal: motivi incisi in nero e oro ed un disegno di un sole
Manicatura: Corno
Finiture: Ottone
Lunghezza lama: 260mm.
Spessore della lama: 9mm.
Lunghezza totale: 390mm.
Karda: 105mm.
Chakmak: 105mm.
Peso: 540g.
Fodero: in filigrana d'argento, velluto rosso e legno
Note: Il Kothimora è un coltello speciale che viene regalato ai gurkha o alle truppe britanniche al momento del ritiro dopo gli anni passati nell'esercito. - Coltello originale nepalese interamente realizzato a mano3615G -
Kukri Artigianale - Khotimora Cerimoniale Medium - coltello
Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: Scoperto
Aunlo-Bal: motivi incisi in nero e oro ed un disegno di un sole
Manicatura: Corno
Finiture: Ottone
Lunghezza lama: 200mm.
Spessore della lama: 9mm.
Lunghezza totale: 305mm.
Karda: 70mm.
Chakmak: 70mm.
Peso: 320g.
Fodero: in filigrana d'argento, velluto nero e legno
Note: Il Kothimora è un coltello speciale che viene regalato ai gurkha o alle truppe britanniche al momento del ritiro dopo gli anni passati nell'esercito. - Coltello originale nepalese interamente realizzato a mano3615BLACK -
Kukri Artigianale - Khotimora Medium Cerimoniale - coltello
Lama: Acciaio al carbonio
Conformazione: Dui Chirra
Kauri: Scoperto
Aunlo-Bal: motivi incisi in nero e oro ed un disegno di un sole
Manicatura: Corno
Finiture: Ottone
Lunghezza lama: 200mm.
Spessore della lama: 9mm.
Lunghezza totale: 305mm.
Karda: 105mm.
Chakmak: 105mm.
Peso: 320g.
Fodero: in filigrana d'argento, velluto rosso e legno
Note: Il Kothimora è un coltello speciale che viene regalato ai gurkha o alle truppe britanniche al momento del ritiro dopo gli anni passati nell'esercito. - Coltello originale nepalese interamente realizzato a mano3615 -
Kukri Artigianale - Mini Operation Iraqi Freedom - coltello
Lama: Acciaio al carbonio
Conformazione: Chirra
Kauri: Scoperto
Aunlo-Bal: disegno inciso nero e oro
Manicatura: legno inciso
Finiture: Bronzo
Lunghezza lama: 180mm.
Spessore della lama: 8mm.
Lunghezza totale: 295mm.
Karda: -
Chakmak: -
Peso: 205g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano3596 -
Kukri Artigianale - Nepal Police 008 manico legno - coltello
Kukri - Nepal Police
Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).
Lama: Acciaio al carbonio
Manicatura: legno
Lunghezza lama: 225 mm.
Spessore della lama: 10 mm.
Lunghezza totale: 355 mm.
Peso: senza fodero g. 524 - con fodero g. 666
Fodero: in cuoio e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.3599 -
Kukri Artigianale - Operation Iraqi Freedom - coltello
Kukri - Operation Iraqi Freedom
Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).
Lama: full tang in Acciaio al carbonio
Manicatura: Legno
Lunghezza lama: 275mm.
Spessore della lama: 10mm.
Lunghezza totale: 415mm.
Peso: 710g.
Fodero: in cuoio e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.3597 -
Kukri Artigianale - Panjawal Gripper - coltello
Lama: Acciaio al carbonio
Conformazione: Lama piana
Kauri: Scoperto
Aunlo-Bal: singola linea nera incisa
Manicatura: Corno nero di bufalo lucidato ed inciso
Finiture: Ottone
Lunghezza lama: 255 mm.
Spessore della lama: 9.5 mm.
Lunghezza totale: 385 mm.
Karda: 120 mm.
Chakmak: 115 mm.
Peso: 498g.
Fodero: in cuoio e legno
Note: Coltello originale nepalese interamente realizzato a mano3962 -
Kukri Artigianale - Service 2 - coltello
Lama: Acciaio al carbonio
Conformazione: Lama piana
Kauri: Scoperto
Aunlo-Bal: singola linea nera incisa
Manicatura: Corno nero di bufalo inciso
Finiture: Ottone
Lunghezza lama: 260 mm.
Spessore della lama: max 10 mm.
Lunghezza totale: 395 mm.
Karda: 110 mm.
Chakmak: 100 mm.
Peso: 520 g.
Peso con fodero: 692 g.
Fodero: in legno e materiale plastico
Note: Coltello originale nepalese interamente realizzato a mano: le caratteristiche dei singoli pezzi possono quindi variare.3611-2 -
Kukri Artigianale - World War II Gurkha knife Horn - knife
Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: single engraved, black line
Manicure: Black horned horn engraved and polished
Finishes: Brass
Blade length: 275 mm.
Blade thickness: 10 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 105 mm.
Weight: 505g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand3612 -
Kukri Artigianale - World War II Gurkha Wood - knife
Kukri - World War II Gurkha
Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).
Blade: Carbon steel
Handling: Wood - ATTENTION, since it is a handicraft product, the color of the handle may vary from the photographed model
Blade length: 250 mm.
Blade thickness: 11 mm.
Total length: 405 mm.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.3598