Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spartan Blades - Talos Liner Lock knife - Black - Harsey Design - SFBL7BK - kitchen knife
The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.
Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySFBL7BK -
Spartan Blades - Poros knife - G10 Green - 154CM - SFL11GR - knife
The POROS flipper was designed by Curtis Iovito as a robust and large-sized flipper. The high grind lines of this blade, combined with a sharp and penetrating tip, make it a reliable companion for everyday carry.
Its quick flipper action is assisted by IKBS bearings for that "Snap" you're looking for! Its distinctive scallops are not only beautiful to look at but also ensure a secure grip. The deep pocket clip maintains a low profile while keeping your blade ready for use when needed. The blade is made of 154CM stainless steel with a black titanium nitride coating; the SS hardware and liner have a black electroplated powder coating.
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in 154CM stainless steel 58/60 HRC
Blade treatment: Black Titanium Nitride Coating
Handle: OD Green G10
Blade length: 89mm.
Blade thickness: 4mm.
Closed length: 97mm
Total length: 230mm.
Weight: 147g.
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos. Design: Curtis Iovito
Notes: The Field Grade series with Bronze-colored box identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFL11GR -
Spartan Blades - Talos Liner Lock knife - Green - Harsey Design - SFBL7GR - kitchen knife
The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.
Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySFBL7GR -
Fox - Chnops by Gobbato - FX-543ALB - M390 and Carbon Fiber - knife
Intended use: sports/collection
Production type: Industrial
Country of Production: Italy
Blade: stainless steel M390 60/62HRC
Blade finish: Black PVD
Handle: Carbon Fiber
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, bronze oxidized titanium
Packaging: Cardboard box with Fox Knives logos and faux leather zippered case
Notes: Design by Riccardo GobbatoFX-543CFBR -
Fox - Chnops by Gobbato - FX-543ALG - Becut and Aluminum Orange - knife
Intended use: sporting/collection
Production type: Industrial
Country of Production: Italy
Blade: Becut 56/58HRC stainless steel
Blade finish: Black Top Shield
Handle: Anodized aluminum
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo GobbatoFX-543ALO -
Fox - Chnops by Gobbato - FX-543ALG - Becut and Aluminum Green - knife
Intended use: sporting/collection
Production type: Industrial
Country of Production: Italy
Blade: Becut 56/58HRC stainless steel
Blade finish: Black Top Shield
Handle: Anodized aluminum
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo GobbatoFX-543ALG -
Fox - Chnops by Gobbato - FX-543ALB - Becut and Aluminum Black - knife
Destinazione d'uso: sportivo/collezione
Tipo di produzione: Industriale
Paese di produzione: Italia
Lama: in acciaio inox Becut 56/58HRC
Finitura lama: Black Top Shield
Manicatura: Alluminio Anodizzato
Lunghezza lama: 70mm.
Spessore lama: 3mm.
Lunghezza chiuso: 102m.
Lunghezza totale: 180mm.
Spessore manicatura: 12mm
Peso: 78g.
Meccanismo di chiusura: Liner Lock
Clip: amovibile e reversibile, in acciaio inox
Confezione: Scatola di cartone con loghi Fox Knives
Note: Design by Riccardo GobbatoFX-543ALB -
Fox - Golok Hitam Machete - Fighting Knife - PRIVATE COLLECTION - FX-9CM02B - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: good condition
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on blade: signs of wear on blade.
* Marks on handle: none
* Box: lacking original packaging, sold with scabbard only
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory Coltelleria Collini
Intended Use: Tactical / HikingType of production: industrial
Blade: stainless steel N690Co 58/60HRC
Country of production: Italy
Handle: forprene, removable
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 357mm.
Balance: forward, 45mm from the lower guard branch
Weight: 380g.
Sheath: made of 1000D OD Green cordura, MOLLE compatible
Notes: Foxionic surface treatment at 72/75HRCAP-9CM02B-US -
Fox - Jungle Bolo Machete - FX-695 - knife
Intended use: Hiking
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: FRN and overmoulded rubber
Blade length: 270mm.
Blade thickness: 3.6mm.
Total length: 430mm.
Balancing: Advanced
Weight: 425g.
Sheath: in black leather, with vertical belt port
Packaging: cardboard box with Fox FKMD logos
Note: -FX-695 -
Fox - Jungle Parang Machete - FX-694 - knife
Intended use: Hiking
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: FRN and overmoulded rubber
Blade length: 270mm.
Blade thickness: 3.6mm.
Total length: 430mm.
Balancing: Advanced
Weight: 425g.
Sheath: in black leather, with vertical belt port
Packaging: cardboard box with Fox FKMD logos
Note: -FX-694 -
Fox - Jungle Latin Machete - FX-693 - knife
Intended use: Hiking
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: FRN and overmoulded rubber
Blade length: 390mm.
Blade thickness: 3.6mm.
Total length: 545mm.
Thickness when closed: -
Balancing: Advanced
Weight: 642g.
Sheath: in black leather, with vertical belt port
Packaging: cardboard box with Fox FKMD logos
Note: -FX-693 -
Fox - Chnops by Gobbato - FX-543DBL - Damasteel and PVD Titanium - knife
Intended use: sporting/collection
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel damsco Damasteel DS93X Gysinge 62/64HRC
Blade finish: -
Handle: Stonewashed PVD titanium
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm.
Weight: 105g.
Locking mechanism: Liner Lock
Clip: removable and reversible, purple oxidized titanium
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo GobbatoFX-543DBL -
Fox - Golok Hitam Machete - Fighting Knife - USED - FX-9CM02B - knife
Knife out of production and no longer available, from a private collection, previously used, re-sharpened and with signs of wear on the finish of the blade and the sheath - Overall in good condition, previously used, still has a very good sharpness and shows some signs of wear on the finish of the blade - Handle in perfect condition - The sheath shows visible signs of wear but does not affect in any way the functionality, use or portability - Accompanied by original cardboard box - Checked and guaranteed by our internal laboratory.
Intended Use: Tactical / HikingType of production: industrial
Blade: Stainless steel N690Co 58/60HRC
Country of production: Italy
Handle: in forprene, removable
Blade length: 220mm.
Blade thickness: 6mm.
Total length: 357mm.
Balance: advanced, at 45mm from the lower guard branch
Weight: 380g.
Sheath: Cordura 1000D OD Green, MOLLE compatible
Notes: Foxionic surface treatment at 72/75HRCFX-9CM02B-US -
Spartan Blades - Formido EDC Knife - Black - SB39BKKYBK - Knife
After more than 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years had been designing and designing knives for friends in the special forces and Mark, who had always been involved in military equipment and tactics when he worked in the "Green Berets", decided to combine their skills and their passion with the goal to build innovative and functional knives using materials of the highest quality and made entirely in the United States.
Type of production: Mid Tech
Country of production: USA
Blade: CPM-S35VN 59 / 60HRC stainless steel
Blade finish: PVD Tungsten DLC Flat Black
Handle: -
Blade length: 95mm.
Blade thickness: 4.8mm.
Total length: 220mm.
Balancing: on the guard branch
Weight: 132g.
Sheath: in kydex
Packaging: Cardboard box with Spartan Blades logos
Notes: Designed by IovitoSB39BKKYBK -
Spartan Blades - Formido EDC Knife - Tan - SB39BKKYTN - Knife
After more than 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.
Curtis, who for years had been designing and designing knives for friends in the special forces and Mark, who had always been involved in military equipment and tactics when he worked in the "Green Berets", decided to combine their skills and their passion with the goal to build innovative and functional knives using materials of the highest quality and made entirely in the United States.
Intended use: Tactical / Military
Type of production: Mid Tech
Country of production: U.S.A.
Blade: CPM-S35VN 59 / 60HRC stainless steel
Blade finish: PVD Tungsten DLC Flat Tan
Handle: -
Blade length: 95mm.
Blade thickness: 4.8mm.
Total length: 220mm.
Balancing: on the guard branch
Weight: 132g.
Sheath: in kydex
Packaging: Cardboard box with Spartan Blades logos
Notes: Designed by IovitoSB39BKKYTN -
Fox - Golok Hitam Machete - Fighting - FX-9CM02B - coltello
Destinazione d'uso: Tattico/Militare
Tipo di produzione: industriale
Lama: in acciaio inox N690Co 58/60HRC
Produzione Lama: Italia
Manicatura: Forprene
Lunghezza lama: 220mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 357mm.
Bilanciatura: avanzata a 45mm dal ramo di guardia inferiore
Peso: 380g.
Chiusura: -
Clip: -
Fodero: Cordura 1000D OD Green con sistema MOLLE
Note: trattamento superficiale Foxionic a 72/75HRC5746 -
Fox / Hill Knives - Afghanistan Memorial Knife - AMK-279 - knife
Intended Use: Tactical / Collection
Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade Finish: Hard ceramic coated
Handle: G10
Blade length: 150mm.
Blade thickness: 6.3mm.
Total length: 279mm.
Weight: 220g.
Scabbard: Kydex, with MOLLE clip
Package: Cardboard box / display with ISAF and Fox Knives symbols and logos
Notes: Designed by Hill Knives7738