Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory

Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim Vagner

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Early 2000s knife, previously purchased.
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Small abrasions given by being placed in Kydex sheath.
* Marks on handle: None
* Box: -
* Scabbard: Present
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical

Production type: MidTech
Country of Production: USA
Blade: full tang stainless steel CPM-S30V
Finish: Tiger Stripe
Handle: Paracord
Blade length: 100mm.
Blade thickness: 4.5mm.
Total length: 195mm.
Weight: 125g.
Sheath: thermoformed kydex, with Tek-Lok multi-position attachment
Notes: previously purchased knife, from private collection

KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 1995 NOS knife - New Old Stock - New from stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory.
* Marks on blade: Given by time
* Marks on handle: Given by time.
* Box: Present, original, in very good condition
* Scabbard: Present, original, in very good condition, with small marks given by time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory

Intended use: collection / tactical / sporting

Type of production: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Cordura
Packaging: cardboard box with Cold Steel logos and "Made in USA" logos.
Notes: knife from 1995 NOS - New Old Stock - New from stock

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present - Original
* Scabbard: Present - Original, with all accessories included.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Tactical / Neck Knife / CQD

Country of Production: Germany
Blade: full tang in 440C 58/60HRC stainless steel
Handle: cocobolo wood
Blade length: 85mm.
Blade thickness: 3mm.
Total length: 185mm.
Balance: Backward
Weight: 90g.
Clip: MCS2 System that allows 9 different carry options, all explained in the manual
Sheath: Ultra flat Kydex sheath with additional magnetic retention
Notes: knife withdrawn from private collection, like new

Biographical Note:
Bud Nealy is universally recognized as one of the best knifemakers in the world. He is also known as the inventor of the MCS (Multi Concealment Sheath) system that allows the knife to be placed securely in any type of position. And it is because of these two requirements that every day hundreds of his MCS systems are used by police officers, undercover agents, S.W.A.T. and R.A.I.D. members, U.S. embassy guards, Bodyguards and Air Rangers.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Original packaging present
* Scabbard: Original scabbard present.
* Manuals, Certificates and Warranties: Certificate of Warranty and Authenticity present.
* Checked and Certified by our in-house laboratory



Intended use: sports/collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL-34 60HRC
Blade finish: dual tone (satin finish and microblading)
Handle: channel handles and titanium TI6AL4V inserts, ball bearing movement
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: 147mm.
Total length: 256mm.
Weight: 120g.
Closure: -
Clip: -
Sheath: Black leather pouch
Packaging: Leather pouch with zipper and certificate of authenticity and warranty made of steel, laser engraved
Notes: Designed and made entirely by hand in Italy by Davide Ceroni - Previously purchased 09/12/2021 specimen from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

The first and original Tanto "Made in Japan", here in a 1980's version with a San Mai steel blade, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto.

* Type: Previously Purchased
* Condition: very good, never used, some light surface marks (visible against the light)
* Commercially available Out of production
* Sharpening: Original wire
* Marks on blade: yes, superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good general condition, some marks present
* Manuals, Certificates and Warranties: no
* Checked and certified by our internal laboratory

Intended use: Collection

Type of production: Industrial
Country of manufacture: Japan
Blade: San Mai steel - Made in Japan
Blade treatment: satin finish
Handle: Kraton with brass guard and pommel
Blade length: 145m
Blade thickness: 4.7mm.
Total length: 285mm.
Balance: recessed
Weight: 268g.
Sheath: Black leather, branded "Japan".
Packaging: without original box
Notes: Knife from a private collection, first series, produced in the 1980s and out of production since the 1990s, overall in very good condition.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercially available: Discontinued since 2014, limited to only 150 numbered pcs.
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present - Original
* Scabbard: -
* Manuals, Certificates and Warranties: Warranty certificate with serial number, date of manufacture and signature.
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: sintered stainless steel CPM-154CM
Blade Finish: Stone Washed
Handle: G10
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 178mm.
Thickness when closed: 17mm.
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Quartermaster logos, warranty certificate with date of manufacture, serial number and signature
Notes: ORB Pivot System ball bearing opening system - 2014 limited edition specimen of only 150, individually numbered on blade and box (specimen number #91)

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: no longer in production since 2014
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Guarantees: ZT certificates
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Tactical / Military

Type of production: Industrial
Production Lama: USA
Blade: CPM-S30V steel
Blade treatment: Tungsten DLC Coating
Handle: Black anodized aluminum with non-slip Trac-Tec inserts
Blade length: 925mm.
Blade thickness: 4mm.
Closed length: 126mm.
Total length: 215mm.
Thick when closed: 17mm.
Balancing: -
Weight: 146g.
Closure: Liner Lock
Clip: Removable, Multiposition, in stainless steel
Sheath: -
Packaging:
Notes: Design by Ken Onion - SpeedSafe opening system

Knife withdrawn from private collection - Discontinued coloration - First series, with flat sheath - Overall in very good condition, with small marks on the blade due to insertion and removal of the knife from the sheath - Original factory sharpening in excellent condition, never used - Accompanied by original box and paper certificates and warranties - checked and certified by our in-house laboratory.

Intended Use: Tactical/Sporting

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co
Finish: camouflage coating
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Total length: 210mm.
Balance: backward
Weight: 200g.
Sheath: rigid ABS with Tek-Lok attachment with automatic knife retention system.
Packaging: knife withdrawn from private collection globally in excellent condition

Knife from a private collection - The first and original Tanto "Made in Japan", here in the second series from 1986, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto - Overall in very good condition, with no particular scratches, marks or abrasions on blade and handle; a few small marks of time on scabbard - Product still has original factory sharpening, although it would need a brightening-no signs of wear anyway - Supplied with its own original leather scabbard marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: made of "Cold Steel's 400 Series Stainless" steel (presumably 420 stainless)
Blade treatment: satin finish
Handle: made of Kraton with brass guard and pommel
Blade length: 145m.
Blade thickness: 5mm.
Total length: 285mm.
Balance: backward
Weight: 259g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife from a private collection - The first and original Magnum Tanto "Made in Japan" from 1988, progenitor of the modern generation continued with the Magnum Tanto II in 1990 - Overall in very good condition, with no particular scratches, marks or abrasions on blade, handle and sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.

Intended use: collection

Type of manufacture: Industrial
Country of manufacture: Japan
Blade: stainless steel AUS-8A
Blade treatment: satin finish
Handle: kraton
Blade length: 230mm.
Blade thickness: 5mm.
Total length: 370mm.
Balance: advanced
Weight: 330g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.

Knife from a private collection - Very rare and highly sought after discontinued model dating back to 2000 - Peculiar tanto blade with chisel sharpening - This is a scaled down version of Timberline's Specwar model made in collaboration with Emerson - Like new, never used, perfect in every detail, with warranty and immaculate box - Checked and certified by our in-house laboratory.

Intended Use: Tactical / Collection

Type of manufacture: Industrial
Country of Production: USA
Blade: 440C stainless steel with chisel sharpening
Blade finish: matte microbead blasting
Handle: Nylon and Fiberglass
Blade length: 95mm.
Blade thickness: 2.5mm.
Total length: 220mm.
Weight: 105g.
Sheath: Kydex
Notes: 2000 knife from a private collection - Like new

Knife from private collection - Like new, never used, with original box in excellent condition - Mid 90's production still made in Japan, with VG-1 steel - All in mint condition. Checked and certified by our in-house laboratory.

Intended Use: Collector/Sportsman

Type of production: Industrial
Country of Production: Japan
Blade: Stainless steel VG-1
Blade Finish: Satin
Handle: Zytel
Blade length: 104mm.
Blade thickness: 3mm.
Total length: 233mm.
Weight: 105g.
Closure: Back-Lock
Clip: Removable, painted stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Like-new knife from a private collection, dating from the mid-1990s; made in Japan from VG-1 steel

Knife from a private collection - The original Recon Tanto "Made in USA" of the '90s, progenitor of the current generation - Absolutely like new, never taken out of the box, still with the original factory grease on the blade, sheath without signs of use and knife insertion - Complete, with original box and Cold Steel warranty - Checked and certified by our internal laboratory.

Intended use: collection / tactical / sporting

Production type: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balancing: advanced
Weight: 265g.
Scabbard: Simil-leather
Package: Cardboard box with Cold Steel and "Made in USA" logos
Notes: Knife from a private collection - Made in the late 90's (presumably 1997/1998) - Absolutely like new

Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2005 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.

Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

The only copy at our disposal, without box, rare and out of production for many years.

Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel - DLC
Handle: polymer with aeronautical aluminum inserts with Kraton anti-slip
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length: 130mm
Total length: 223mm.
Thick when closed: 20mm
Weight: 170g.
Closure: Button Lock
Clip: removable, in stainless steel
Packaging:

Intended Use: Sporting/EDC

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN 59/60HRC
Blade Treatment: Satin finish
Handle: Aluminum T6061 mirror polished with G10 inserts
Blade length: 89mm.
Blade thickness: 3.8mm.
Length closed: 120mm.
Total length: 209mm.
Weight: 125g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: Stainless steel, removable
Package: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition of only 3500 pieces with signature of "Lynn C. Thompson" laser engraved on the blade and pencilled on the product packaging.

FROM COLD STEEL WEBSITE

The Oyabun Limited is a high-end collector's version of our Oyabun. It shares features in common with the standard model in terms of functionality and appearance, but differs greatly in the materials used in its construction. It also has the value of being a collectible keepsake as only 3500 were produced. Each one is serially numbered and each box will be personally signed by Lynn C. Thompson himself! The blade's fine S35VN steel is an expensive powder coated steel that is heat treated to Rc 59-60 and hardened to sub zero. It has been given an attractive two-tone finish on the blade planes and a high satin polish on the blade bevels. Notably, the handle frame is milled from two solid billets of 6061 aluminum to create the bolster and pommel, which has been given a beautiful mirror polished finish. The handle also features CNC-machined G-10 plates with a diamond checkerboard pattern for a good, secure grip.

"I like flashy knives and when they are limited collector's editions with serial numbers made from high quality materials, I like them even more. That's why I think you'll like our Oyabun Limited. Only 3500 pieces will be made. All individually serial numbered with 6061 aluminum frames, CNC machined handles that are completely checkered just like my much original and a two-tone polished S35VN blade! And best of all, all this splendor and high performance is backed by our state-of-the-art leaf spring lock and secondary safety, so you know it won't bend on your hand. Now you have a knife that is worth every penny asked (just compare) and has tremendous appeal/appreciation from collectors!!!" - Lynn Thompson

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: DLC coating
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Length closed: 136mm.
Total lenght: 238mm.
Thickness when closed: 13mm.
Weight: 147g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Package: cardboard box with Cold Steel logos
Notes: -

Collector's knife from private collection - Handcrafted in 2001 by Allen Elishewitz - Overall in good condition, original sharpening, some small signs of wear on the titanium handle and on the back of the blade - Without certificates and packaging - Checked and certified by our Collini Cutlery internal laboratory.

Intended use: Collection

Type of production: custom
Country of production: USA
Blade: handcrafted and bevelled, in CPM-154CM stainless steel
Blade treatment: hand satin finish
Handle: full scales in titanium with blue anodizing
Blade length: 82mm.
Blade thickness: 3.5mm.
Length closed: 130mm.
Total length: 184mm.
Thick when closed: 11mm.
Weight: 96g.
Closing: framelock
Clip: removable, stainless steel
Notes: Made entirely by hand by Allen Elishewitz

Intended use: collection

Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin finish
Handle: titanium and carbon fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm
Balancing: -
Weight: 94g.
Closure: Liner Lock
Clip: in titanium
Sheath: -
Notes: production early 2000s, withdrawn from a private collection

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel AUS-8A
Blade treatment: Satin
Handle: G10
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 178mm.
Weight: 68g.
Closure: Tri-Ad Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Cold Steel logos
Note: -

Purpose: Sportsman / EDC

Type of production: Industrial
Country of Origin: Taiwan
Blade: Stainless steel 1.4116
Blade treatment: Stone washed
Handle: GFN
Blade Length: 89mm.
Blade thickness: 3mm.
Closed length: 114mm.
Overall length: 203mm.
Weight: 85g.
Closure: Tri-Ad Lock
Clip: Removable and reversible, stainless steel
Packing: Cardboard box with Cold Steel logos

Intended use: Sports / Tactical

Type of production: Industrial
Production Country: Taiwan
Blade: CTS-XHP Stainless Steel 60 / 61HRC
Blade treatment: DLC coating
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Closed Length: 136mm.
Overall length: 238mm.
Thick when closed: 13mm.
Weight: 147g.
Closing: Tri-Ad Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -

Intended use: Tactical / Utility

Type of production: Industrial
Production Lama: China
Blade: 1055 carbon steel
Blade treatment: epoxy paint
Handle: Polypropylene
Blade length: 175mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 303mm.
Balancing: on the guard branch
Weight: 340g.
Closing: -
Clip: -
Sheath: SecureEx
Packaging: cardboard box with Cold Steel logos
Note: -