Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Cold Steel - Recon Tanto - Carbon V Made in USA - 1995 NOS Full Set - PRIVATE COLLECTION - 13RT - knife
KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 1995 NOS knife - New Old Stock - New from stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory.
* Marks on blade: Given by time
* Marks on handle: Given by time.
* Box: Present, original, in very good condition
* Scabbard: Present, original, in very good condition, with small marks given by time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratoryIntended use: collection / tactical / sporting
Type of production: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Cordura
Packaging: cardboard box with Cold Steel logos and "Made in USA" logos.
Notes: knife from 1995 NOS - New Old Stock - New from stockCS-13RTCP -
Cold Steel - Thompson Voyager - Signature Limited Edition - 29UXV - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
SERIAL NUMBER 0231
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Limited series, discontinued
* Sharpening: Factory
* Marks on blade: Slight, uneven treatment in places (factory, not due to wear)
* Marks on handle: No
* Box: Present and original, WITH AUTOGRAPH SIGNATURE OF LYNN THOMPSON
* Scabbard: Not present
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratoryIntended use: Sporting/EDC
Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel Carpenter CTS XHP Alloy 59/60HRC
Blade treatment: DLC
Handle: Griv-Ex
Blade length: 135mm.
Blade thickness: 3.6mm.
Length closed: 170mm.
Total length: 304mm.
Weight: 208g.
Closure: Back Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition (serial no. 0231) with signature of "Lynn C. Thompson" laser engraved on the blade and in pen on the packagingCS29UXV -
Cold Steel - Caledonian knife - PRIVATE COLLECTION - San Mai III - Micarta Handles - CS60CE
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratoryIntended use: Sporting / Utility
Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.
The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle.
The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.
The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.
AP-CS-60CE -
Cold Steel - Vintage Original Tanto SAN MAI - Made in Japan - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
The first and original Tanto "Made in Japan", here in a 1980's version with a San Mai steel blade, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto.
* Type: Previously Purchased
* Condition: very good, never used, some light surface marks (visible against the light)
* Commercially available Out of production
* Sharpening: Original wire
* Marks on blade: yes, superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good general condition, some marks present
* Manuals, Certificates and Warranties: no
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Industrial
Country of manufacture: Japan
Blade: San Mai steel - Made in Japan
Blade treatment: satin finish
Handle: Kraton with brass guard and pommel
Blade length: 145m
Blade thickness: 4.7mm.
Total length: 285mm.
Balance: recessed
Weight: 268g.
Sheath: Black leather, branded "Japan".
Packaging: without original box
Notes: Knife from a private collection, first series, produced in the 1980s and out of production since the 1990s, overall in very good condition.AP-TAN-SM -
Cold Steel - Vintage Original Brass Tanto - Made in Japan - PRIVATE COLLECTION - 13A - knife
Knife from a private collection - The first and original Tanto "Made in Japan", here in the second series from 1986, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto - Overall in very good condition, with no particular scratches, marks or abrasions on blade and handle; a few small marks of time on scabbard - Product still has original factory sharpening, although it would need a brightening-no signs of wear anyway - Supplied with its own original leather scabbard marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.
Intended use: collectionType of manufacture: Industrial
Country of manufacture: Japan
Blade: made of "Cold Steel's 400 Series Stainless" steel (presumably 420 stainless)
Blade treatment: satin finish
Handle: made of Kraton with brass guard and pommel
Blade length: 145m.
Blade thickness: 5mm.
Total length: 285mm.
Balance: backward
Weight: 259g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.13ACP -
Cold Steel - Vintage Gen I Trailmaster - Made in USA - PRIVATE COLLECTION - 16 - knife
Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.
Intended use: collectionType of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.16CP -
Cold Steel - Vintage Original Magnum Tanto - Made in Japan - PRIVATE COLLECTION - 13M - knife
Knife from a private collection - The first and original Magnum Tanto "Made in Japan" from 1988, progenitor of the modern generation continued with the Magnum Tanto II in 1990 - Overall in very good condition, with no particular scratches, marks or abrasions on blade, handle and sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.
Intended use: collection
Type of manufacture: Industrial
Country of manufacture: Japan
Blade: stainless steel AUS-8A
Blade treatment: satin finish
Handle: kraton
Blade length: 230mm.
Blade thickness: 5mm.
Total length: 370mm.
Balance: advanced
Weight: 330g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.13MCP -
Zero Tolerance - Tan DLC Titanium Flipper - Sprint Run - ZT0095TANBLK - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: CPM-S90V stainless steel
Blade treatment: Tan DLC
Handle: titanium with matt black DLC treatment
Blade length: 99mm.
Blade thickness: 3mm.
Length closed: 123mm.
Total length: 213mm.
Thick when closed: 12mm.
Weight: 152g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearings - Carson Flipper opening system - Sprint Run 2018 edition available while stocks lastZT0095TANBLK -
Zero Tolerance - Rick Hinderer 0392 Factory Custom - Matte Black - ZT0392BLK - knife
Special Edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made from specially Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, cover-clips are handmade.Use: Collection / Sports
Type of production: Industrial with handmade parts
Production Lama USA
Blade: Stainless steel CTS-204P
Blade treatment: matte black DLC
Handle: Titanium with matte black DLC treatment
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 208mm.
Thickness when closed: 14mm.
Weight: 164g.
Lock: Frame Lock
Clip: Removable, Multi position, anodized titanium
Packaging: box with logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - Opening system KVT on ball bearings with engagement by FlipperZT0392BLK -
Zero Tolerance - Matte Black Titanium Flipper - ZT0095S90BLK - knife
Intended use: sports / tactical
Type of production: Industrial
Production Country: USA
Blade: In-CPM S90V stainless steel
Blade Treatment: matt black DLC
Handle: titanium with matt black DLC treatment
Blade length: 99mm.
Blade thickness: 3 mm.
Closed Length: 123mm.
Overall length: 213mm.
Thickness when closed: 12mm.
Weight: 152g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run in 2017 in a limited edition - Opening KVT on ball bearings - Opening Carson Flipper SystemZT0095S90BLK -
Zero Tolerance - Sinkevich Flipper - G10 Sprint Run - ZT0452G10 - knife
Intended use: tactical / sports
Type of production: Industrial
Country of production: USA
Blade: M390 stainless steel 59/61HRC
Blade finish: dual tone - stonewashed and satin
Handles: rose bronze titanium and black G10
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Overall length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: 2017 Sprint Run Edition - Design by Dmitry Sinkevich - Opening on KVT ball-bearing systemZT0452G10 -
Zero Tolerance - Rick Hinderer Factory Custom - Purple and Black - ZT0392PURBLKWC - knife
Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, and custom parts made specifically by Hinderer in his workshop. Specifically, the entire titanium screws, spacers, clips, cover-clips and all the parties in purple coloration are made entirely by hand.
Intended Use: Collection / Sports
Type of production: Industrial handcrafted pieces
Production Lama USA
Blade: stainless steel M390
Blade treatment: matt black DLC
Handle: Titanium with matte black DLC finish - screws and spacers purple anodized titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Weight: 159g.
Lock: Frame Lock
Clip: Removable, Multiposition, anodized titanium
Packaging: collectible box with logos Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - Opening system KVT on ball bearings with engagement by Flipper - Curiosity: the warranty certificate is erroneously reported the CTS-204P steel; the company then decided instead to produce the knife using a stainless steel M390ZT0392PURBLKWC -
Zero Tolerance - Rick Hinderer 0392 Factory Custom - Black Gray - ZT0392WC - knife
Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.
Intended Use: Collection / SportsType of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in black
Handle: Titanium Anodized gray with black trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by FlipperZT0392WC -
Zero Tolerance - Rick Hinderer 0392 Factory Custom - Black Green - ZT0392BLKGRN knife
Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.
Intended Use: Collection / SportsType of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in black
Handle: Titanium black anodized, with green trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by FlipperZT0392BLKGRN -
Zero Tolerance - Rick Hinderer 0392 Factory Custom - Bronze Gold - ZT0392BRNGLD - knife
Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.
Intended Use: Collection / SportsType of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in bronze
Handle: Titanium anodized bronze, with gold trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by FlipperZT0392BRNGLD