Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Intended use: Utility / Collection

Type of production: Industrial
Blade: CPM-S30V stainless steel 61-62HRC
Blade treatment: Stone-Washed
Country of production: Maniago - Italy
Handle: buffalo horn
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Weight: 109g.
Lock: Back Lock
Clip: reversible, stainless steel
Notes: two-handed blade opening - Design by T. Rumici

Intended Use: Sport / Tactical / Collection

Type of production: Industrial
Blade: Stainless steel CPM-S30V 61-62HRC
Treatment Lama: Stone-Washed
Production Lama: Italy
Handle: G10 Orange
Blade length: 75mm.
Blade Thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 109g.
Closure: Back Lock
Clip: Reversible, Steel
Notes: Design by Rumici T. and M. Fantoni - First production run limited edition in just 25 numbered pieces of blade and box.

Intended Use: Sport / Tactical / Collection

Type of production: Industrial
Blade: Stainless steel CPM-S30V 61-62HRC
Treatment Lama: Stone-Washed
Production Lama: Italy
Handle: G10 Black
Blade length: 75mm.
Blade Thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 109g.
Closure: Back Lock
Clip: Reversible, Steel
Notes: Design by Rumici T. and M. Fantoni - First production run limited edition in just 25 numbered pieces of blade and box. Exemplary number 23 of 25.

This slender-shaped knife with a curved handle derives from ancient models used by the shepherds of Abruzzo. Its adoption in the repertoire of knives manufactured in Scarperia (where the particular crease of the handle earned it the name of "hunchback") dates back to the late nineteenth century and took place without flashy changes compared to the original type, equipped with a simple spring and one-piece bovine horn handle. This model is in horn tip.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 247mm.
Weight: 107g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The first certain information on this knife dates back to 1848. A specimen, dated 1871, is kept in the State Archives of Florence, attached to the documents of a trial against a convicted person. The mark of a Scarperia manufacturer, Gustavo Buffi, is clearly visible on it, the shape of the blade is that with an angled back, also maintained in the twentieth century and present in the catalogs of various firms in Scarperia. The Maremmano is a horn tip model.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 120g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The "Neapolitan" old drives is a knife in horn tip elongated, suitable to cut the use of tip. It is not clear which of the knives of the traditional Neapolitan is inspired model of Scarperia. The general line is somewhat related to the "Maremma" in the form assumed in the Mugello, but with more slender proportions and read.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip

The most striking feature of this model is in the edge of the blade, a full right to the tip. The Casertano lent itself well to a variety of uses, thanks to the cutting edge straight that finishes in a very simply shaped handle. This solution was very appreciated in different times and places, even outside the area where it originated, as to be still widespread. The Caserta is a model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 70 gr.
Handle in horn tip

Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 83g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 110mm.
Blade thickness: 3mm.
Length closed: 145mm.
Total length: 265mm.
Weight: 102g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Destinazione d'uso: Survival/Sportivo

Lama: in acciaio inox AN-58
Manicatura: plastica e metallo
Lunghezza lama: 105mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 210mm.
Bilanciatura: arretrata, a 1.5cm dal ramo di guardia inferiore
Peso: 78g.
Chiusura: -
Clip: -
Fodero: in pelle
Note: -

Zuava Cattle Polished R-ZVC19 - knife

Traditional knife of Scarborough and is used in all of Tuscany to the first 800. He had an element of novelty, for its time: the metal frame inside the handle as well in traditional cattle.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 19 cm.
Weight 100 gr.

Traditional Scarperia knife and used throughout Tuscany until the early 1800s. It had an element of novelty, for the time: the metallic structure inside the handle as well as in the traditional bovine.

440 stainless steel blade.
Blade length 8 cm.
Blade thickness 3 mm.
Open length 19 cm.
Weight 100 gr.

Intended use: collection

Type of production: handmade
Country of Production: Scarperia - Italy
Blade: stainless steel X50CrMoV15
Blade finish: satin-finished
Handle: ox horn and brass
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Weight: 193g.
Closure: blade lock
Packaging: cardboard box with Consigli logos
Sheath: fabric pouch

Handicrafts are beautiful because they are varied!
The colors of the materials from which crafts are made may vary from those shown in the pictures.

Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

The silver Fiorentino version has the same construction characteristics as the classic Fiorentino, but it is made with silver finishes, in the lily, in the band and in the rings worked by hand by skilled engravers. Horn tip model.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and Silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 76g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which our handcrafted products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Roman Ring with polished horn cattle R-RMC30A - knife

Antique knife initially in use in the Roman countryside, and then in Rome at the time of the papal city. Often, the rustic character of duels, it was designed primarily as a weapon. The blade is made of carbon steel with locking blade. The cow horn handle. Variable length. These knives are made from "Conaz" only on demand, thereby making each one as unique.

Intended Use: Collection

Type of production: craft
Blade: carbon steel
Treatment Blade: -
Production Blade: Italy
Handle: Horn Cattle Etched
Blade length: 130mm.
Blade Thickness: 2.5mm.
Closed Length: 160mm.
Overall length: 290mm.
Balancing: -
Weight: 106g.
Closure: Without Rear Blade
Clip: -
Sheath: -
Notes: -

ntended use: Tactical / Sports

Type of production: Industrial
Production Lama: Italy
Blade: Stainless CPM-S35VN 61 / 62HRC
Treatment Lama: PVD
Handle: Titanium and G-10
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Overall length: 180mm.
Thick when closed: 15mm.
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. HARSEY

Intended Use: Sport / Tactical / Collection

Type of production: Industrial
Blade: Stainless steel CPM-S30V 61-62HRC
Treatment Lama: Stone-Washed
Production Lama: Italy
Handle: Buffalo Horn
Blade length: 75mm.
Blade Thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 109g.
Closure: Back Lock
Clip: Reversible, Steel
Notes: Design by Rumici T. and M. Fantoni

Intended use: Utility / Collection

Type of production: Industrial
Blade: CPM-S30V stainless steel 61-62HRC
Blade treatment: Stone-Washed
Country of production: Maniago - Italy
Handle: stag horn
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed Length: 102mm.
Overall length: 178mm.
Weight: 109g.
Lock: Back Lock
Clip: reversible, stainless steel
Notes: two-handed blade opening - Design by T. Rumici

Le prime notizie certe su questo coltello risalgono al 1848. Un esemplare, datato 1871, è conservato nell'Archivio di Stato di Firenze, allegato agli atti di un processo a carico di un pregiudicato. Su di esso è ben visibile il marchio di un fabbricante di Scarperia, Gustavo Buffi, la forma della lama è quella con dorso angolato, mantenuta anche nel Novecento e presente nei cataloghi di varie ditte scarperiesi. Il Maremmano è un modello in punta di corno. 

Lama. in acciaio inox 440, 
Manicatura: in corno bovino lucido
Lunghezza totale 200 mm
Lunghezza lama: 90 mm 
Affilato a mano

ATTENZIONE: trattandosi di materiale naturale, la colorazione del corno può risultare diversa da quella presente in foto.

Knife in use for certain information until the first half of the 19th century in the Tuscan and Lazio Maremma.
Through finds from the criminological museum of Rome, he was seen among those knives handed over by the rioters of the penal baths of Civitavecchia to Cardinal Franco Pentini, in 1848, sent to put down a revolt.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 205mm.
Weight: 56g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.

The name clearly indicates the area of ​​origin, but this knife became part of Scarperia's production perhaps as early as the nineteenth century, taking over from an older model called "scimitar" due to the hollow shape of the back of the blade towards the tip.
The handle has no metal seals, apart from the tiny raperelle on which the three pins are pressed, is thinned at the end, making it particularly light, and is made of solid horn.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 197mm.
Weight: 73g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Traditional knife produced by master cutlers in Scarperia, place where, since 1300, the craftsmanship of Italian knives continues.
Typical Piedmont knife, in use since the early 19th century also in Liguria. Originally from the village of Vernante (Cuneo).

The 420 stainless steel blade can be scimitar or straight.
On the upper part of the heel there is always the characteristic appendix with the head of a nail which, by housing a socket in the handle, allows the blade to be held steady with the knifted thumb.
Used for all agricultural and domestic work and, for the particular sharpening, also for carving wood.
The cattlemen also used it as a surgical tool to carve the belly of cattle grazing, when too much wet grass was ingested causing excessive accumulation of gas.

Total length: 200 mm
Blade length: 90mm
Handle: in full polished horn
Sharpened by hand

Traditional Scarperia knife and used throughout Tuscany until the early 1800s.
It had an element of novelty, for the time: the metal structure inside the handle. As well as in the traditional bovine, Consiglio proposes it today also in buffalo and exotic woods.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Buffalo horn
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 19mm.
Weight: 93g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

The version of the Zuava with sundial, very particular, carries on the blade the engraving of an ancient drawing of sundial, functioning. The hard is in brass.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 130mm.
Total length: 240mm.
Weight: 190g.
Closing: retention spring
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

This slender-shaped knife with a curved handle derives from ancient models, used by the shepherds of Abruzzo.
Its adoption in the repertoire of knives manufactured in Scarperia (where the particular fold of the handle earned it the name of "hunchback") dates back to the end of the nineteenth century and took place without obvious changes compared to the original type, equipped with a simple spring and one piece bovine horn handle.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: 112mm.
Total length: 200mm.
Weight: 60g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.
Ulteriori informazioni su questo testo di originePer avere ulteriori informazioni sulla traduzione è necessario il testo di origine
Invia commenti
Riquadri laterali

Brotzu horn 27cm - knife

Typical folding knife Sardinian handicraft produced by the firm of Scarborough Conaz

Blade: 420 stainless steel
Handle: horn
Blade length: 120mm.
Total length: 270mm.
Weight: 102g.

WARNING: Since this is a natural material, the color of the horn may be different from the one in the picture.

Fiorentino Buffalo Silver Engraved R-FIB20A - knife

Craft knife regional product in Scarborough in use up to 800 in Tuscany.
The handle, in a single piece of horn, door foot in the characteristic ring round silver engraved.

Blade of carbon steel
Blade length: 8.5 cm
Blade thickness: 2.5 mm
Length open: 20 cm
Weight: 78 gr

Consigli Scarperia - Pattishall Brotzu horn 33cm - knife

Typical folding knife Sardinian handicraft produced by the firm of Scarborough Conaz

Blade: 420 stainless steel
Handle: horn
Blade length: 150mm.
Total length: 330mm.
Weight: 180g.

WARNING: Since this is a natural material, the color of the horn may be different from the one in the picture.

Ronchetta Horn R-RVC17 - knife

Quaint old-fashioned knife, used in Valtellina especially for agricultural work in viticulture. Lightweight and easy to handle, has achieved perfect functionality, pocket comfortably.

Lama with particular sickle shape

Lama. 440 stainless steel,
Handle: made from a full horn tip
Total length 150 mm
Blade length: 65 mm
Sharp Hand

Zuava Cattle Polished R-ZVC16 - knife

Craft knife regional product in Scarborough, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all work

Handle: polished horn cattle
Blade: Stainless 440A
Total length: 16 cm
Blade Length: 7,5 cm

In use for certain news until the first half of the 19th century in the Maremma area of ​​Tuscany and Lazio. Through finds from the criminological museum in Rome, he was seen among those knives delivered by the rioters of the criminal baths of Civitavecchia to Cardinal Franco Pentini, in 1848, sent to quell a revolt.

The full horn handle is embellished with longitudinal grooves.

Intended use: sports / collection

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 201mm.
Weight: 70g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Fantoni - William W. Harsey HB 02 - knife

Intended use: Tactical / Sport

Type of production: Industrial
Production Blade: Italy
Blade: CPM-S30V steel 60/61HRC
Treatment Blade: Stone Washed
Handle: Titanium and G-10
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Overall length: 180mm.
Thick when closed: 15mm.
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey

Fantoni - Hide Folder Micarta - Design by T. Rumici knife

Intended use: Fighter / Tactical / Collection

Type of production: industrial
Blade: Stainless Steel CPM-S30V 61-62HRC
Treatment Blade: Stone-Washed
Production Blade: Italy
Handle: Micarta Loveless
Blade length: 75mm.
Blade Thickness: 3.2 mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 102g.
Closure: Back Lock
Clip: Reversible, Stainless Steel
Notes: Design by T. Rumici and M. Fantoni

Fantoni - Mix - Green G10 - knife

Intended Use: Sport / Tactical

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel CPM-S30V
Treatment Blade: Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 87mm.
Blade thickness: 3mm.
Closed Length: 115mm.
Overall length: 203mm.
Thick when closed: 12mm.
Balancing: -
Weight: 122g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packing: Carton with logos Fantoni
Notes: Design by Massimo Fantoni

Fantoni - Mix - Orange G10 knife

Intended Use: Sport / Tactical

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel CPM-S30V
Treatment Blade: Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 87mm.
Blade thickness: 3mm.
Closed Length: 115mm.
Overall length: 203mm.
Thick when closed: 12mm.
Balancing: -
Weight: 122g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packing: Carton with logos Fantoni
Notes: Design by Massimo Fantoni

Intended Use: Tactical / Sports

Type of production: Industrial
Production Blade: Italy
Blade: CPM-S30V steel 60/61HRC
Blade Treatment: Stone Washed
Handle: Titanium and G-10
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Total length: 180mm.
Thick when closed: 15mm.
Balance: -
Weight: 88g.
Lock: Liner Lock
Clip: Removable, titanium
Sheath: -
Packaging: cardboard box
Notes: Design by William W. Harsey