Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
G. Sakai - Bird and Trout Tennessee Memorial by Masao Takahashi - 5004/P - Vintage Knife
Intended use: hunting / collection
Production Type Semi-Handmade
Blade: ATS-34 stainless steel
Country of production: Seki - Japan
Handle: micarta with brown heads in brushed stainless steel
Blade length: 65mm.
Blade Thickness: 2.5mm.
Overall length: 158mm.
Closed Length: 94mm.
Locking system: back lock
Weight: 46g.
Sheath: leather, hand-stitched
Packaging: cardboard box with logos G.Sakai
Notes: Knife of the late '90s, new, in excellent condition12575 -
Kanetsune - Fruit Knife ST-200 - knife
Multi-purpose vegetable and fruit knife. Thanks to the wooden case (shirasaya), similar to the one used for the katana or the tanto, the blade remains perfectly protected and easily transportable.
Intended use: Sports / Collection
Blade: 420J2 steel
Japan blade production
Handle: cherry wood
Blade length: 105mm.
Blade thickness: 1mm.
Total length: 210mm.
Balancing: -
Weight: 36g.
Sheath: cherry wood sheath
Note:ST-200 -
Kanetsune - Kiridashi knife - KB612 - knife
Traditional Japanese carving knife "Kogatana" used in gardening, as a knife from the innseto or even for a walk and with a sharp blade only on one side. Thanks to the wooden case (shirasaya), similar to that used for the katana or for the time being, the blade remains perfectly protected and easily transportable.
Intended use: Sports / Collection
Blade: SK5 carbon steel
Lama Japan production
Handle: cherry wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 165mm.
Balancing: -
Weight: 44g.
Sheath: cherry wood sheath
Note:KB612 -
G. Sakai - Backpacker - 16L - vintage knife
Intended use: hunting / sport
Type of production: Industrial seeds
Blade: ATS-34 stainless steel
Country of production: Seki - Japan
Handle: solid aluminum, with rubber inserts
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 172mm.
Closed Length: 98mm.
Locking system: back lock
Weight: 110g.
Sheath: nylon and leather
Packaging: cardboard box with logos G.Sakai
Notes: Knife of the early 90s, brand new, mint conditions12576 -
G. Sakai - Bird and Trout Tennessee Memorial by Masao Takahashi - 5002 - Vintage Knife
Intended use: hunting / collection
Production Type Semi-Handmade
Blade: ATS-34 stainless steel
Country of production: Seki - Japan
Handle: micarta with brown heads in brushed stainless steel
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 180mm.
Closed Length: 107mm.
Locking system: back lock
Weight: 66g.
Sheath: nylon and leather
Packaging: cardboard box with logos G.Sakai
Notes: Knife of the late '90s, new, in excellent condition12574 -
G. Sakai - HSEK Bowie Micarta - HN-501 - Vintage Knife
Intended use: hunting / sport
Type of production Semi-Industrial
Blade: SRS-15 semi-carbon steel 63 / 64HRC
Country of production: Seki City - Japan
Handle: micarta brown with loop guard and brass rivets
Blade length: 237mm.
Blade thickness: 6mm.
Overall length: 378mm.
Weight: 464g.
Sheath: Brown leather
Packaging: cardboard box with G. Sakai logos
Notes: Knife of the late '90s, brand new, mint conditions12573 -
Nieto Camp 8402 coltello
Destinazione d'uso: Survival/Sportivo
Lama: in acciaio inox AN-58
Manicatura: plastica e metallo
Lunghezza lama: 105mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 210mm.
Bilanciatura: arretrata, a 1.5cm dal ramo di guardia inferiore
Peso: 78g.
Chiusura: -
Clip: -
Fodero: in pelle
Note: -nieto8402€31.15Only -99 leftOut of stock -
Nieto - Combate 15cm - 184 coltello
Destinazione d'uso: Tattico/Sportivo
Lama: in acciaio inox 440C
Manicatura: Gomma
Lunghezza lama: 155mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 280mm.
Bilanciatura: arretrata, a 1cm dal ramo di guardia inferiore
Peso: 208g.
Chiusura: -
Clip: -
Fodero: in pelle
Note: -2257€37.70Out of stock -
Nieto - Montana 23cm - 4204 coltello
Destinazione d'uso: Tattico/Sportivo
Lama: in acciaio inox AN-58
Manicatura: metallo e plastica
Lunghezza lama: 230mm.
Spessore della lama:4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 360mm.
Bilanciatura: arretrata, a 1cm dal ramo di guardia inferiore
Peso: 520g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: -0277€54.92Out of stock -
Nieto - Montana knife 18cm - 4203 coltello
Destinazione d'uso: Survival/Sportivo
Lama: in acciaio inox AN-58
Manicatura: Metallo
Lunghezza lama: 180mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 310mm.
Bilanciatura: arretrata, a 3.5cm dal ramo di guardia inferiore
Peso: 450g.
Chiusura: -
Clip: -
Fodero: in pelle
Note: -0242€39.34Only -99 leftOut of stock -
Nieto - Toledo 15cm - 2512 coltello
Destinazione d'uso: Survival/Sportivo
Lama: in acciaio inox AN-58
Manicatura: plastica e metallo
Lunghezza lama: 135mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 240mm.
Bilanciatura: arretrata, a 1.5cm dal ramo di guardia inferiore
Peso: 78g.
Chiusura: -
Clip: -
Fodero: in pelle
Note: -0241€34.43Out of stock