Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
MKM - Campo 7 - MagnaCut & Natural Micarta - CP07MAG-NC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Campo was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Bottle opener
* Flat screwdriver
* Box opener
* Fork
* Scissors
* Phillips screwdriver
* Corkscrew
Intended Use: Hiking / Multipurpose
Production Type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 107g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-CP07MAG-NC -
Viper - Gianghi Brown Micarta - N690 - design by Fabrizio Silvestrelli - V4882IM - knife
Intended use: Light Utility/Hunting
Type of production: Industrial
Blade Production: Italy
Blade: Full Tang in N690Co stainless steel
Blade Treatment: Stonewash
Handle: Brown Micarta
Blade Length: 115mm.
Blade Thickness: 5mm.
Closed Length: -
Total Length: 250mm.
Thickness when closed: -
Balance: set back by 3cm
Weight: 245g.
Closure: -
Clip: -
Sheath: brown leather
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio SilvestrelliV4882IM -
Conaz Consigli Scarperia - Zuava knife 16 cm raw ox horn 50307 - knife
Intended use: sporting/collection
Type of production: artisan
Blade production: Italy
Blade: Stainless steel X50CrMoV15
Blade treatment: -
Handle: Raw ox horn
Blade length: 70mm.
Blade thickness: 1,6mm.
Length closed: 90mm.
Total length: 160mm.
Weight: 53g.
Closure: without blade lock
Packaging: cardboard box
Sheath: -Craftsmanship is beautiful because it is varied
The colours of the materials from which the handicrafts are made may vary from those shown in the pictures.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: that's the beauty of fine materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: that's the beauty of fine workmanship. Combine all this and you have a product that is always different and unique. And always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.
50307 -
Viper - Vale knife by Vox - Walnut - MagnaCut - V6004NO - knife
Enthusiasts know the value of a good knife. Viper honors this idea with its high quality EDC knife, called Vale, made with selected materials. The MagnaCut blade opens smoothly with the thumb stud and is locked in place with the sturdy liner lock. The walnut handle features carvings on the back of the blade, providing a pleasant feel and safe working. The backspacer made of high-quality titanium completes the harmonious look of the knife. It also features a lanyard loop and a flip-over clip
Intended use: Gentleman/EDC
Type of production: Industrial
Blade production: Italy
Blade: CPM MagnaCut steel
Blade Treatment: Satin
Handle: walnut wood
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 111mm.
Total length: 184mm.
Closed thickness: 15mm.
Balancing: -
Weight: 95g.
Closure: Liner Lock
Clip: in titanium
Scabbard: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6004NO -
Viper - Hug by Sacha Thiel - M390 Bronze Stars - V5990DBRS - knife
Intended Use: Sporting/EDC
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: bronze, dark stonewashed, CNC machined, with Stars design
Blade length: 71mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 184mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Slipjoint
Sheath: leather
Packaging: cardboard box with Viper Knives logos
Notes: Design by Sacha ThielV5990DBRS -
Viper - Dan2 by Tommaso Rumici - Bocote - V5930BC - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Lama: Italy
Blade: In stainless steel N690Co 57 / 59HRC
Blade treatment: Satin
Handle: Bocote wood with internal 420C liners and anodized GR2 titanium spacer
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 182mm.
Weight: 90g.
Closure: patented Action Stopper system
Clip: Satin stainless steel
Packaging: cardboard box with Viper logos
Notes: Design by Tommaso RumiciV5930BC -
Conaz Consigli Scarperia - Zuava knife 19 cm raw ox horn 50309 - knife
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ox horn
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 190mm.
Weight: 79g.
Closing: without blade lock
Packaging: cardboard box
Sheath: -
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50309 -
Conaz Consigli Scarperia - Mugello 16 cm horn cattle raw E-CMC16G - knife
Mugello 16 cm horn cattle raw E-CMC16G - knife
Blade: 420 stainless steel
Handle: raw beef
Blade length: 75mm.
Overall length: 165mm.
Weight: 39g.
Closed Length: 90mm.
CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.50306 -
Conaz Consigli Scarperia - Ghiandina 16 cm horn cattle raw E-GHC16G - knife
Ghiandina 16 cm horn cattle raw E-GHC16G - knife
Blade: 420 stainless steel
Handle: raw beef
Blade length: 70mm.
Overall length: 160mm.
Weight: 36g.
Closed Length: 90mm.
CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.50308 -
Conaz Consigli Scarperia - Anconetano ox horn 20 cm - 50001 - knife
Traditional knife produced by master cutlers in Scarperia, a place where, since 1300, the artisan manufacture of Italian knives has continued.
Fisherman's knife, typical of the Adriatic sea belt. With external spring, handle in full polished bovine horn, on the end of the back it has a deep step at right angle useful for branching nets.
Intended use: CollectionType of production: artisanal
Blade: X50CrMoV15 stainless steel
Production Lama: Italy
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 200mm.
Weight: 58g.
Closing:
Notes: handcrafted in the city of Scarperia (FI)The colors of the materials with which our handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you. A slight surprise is therefore always accompanied by every online purchase of our handcrafted products: but this is also the beauty of craftsmanship.
50001 -
Consigli Scarperia - Three Pianelle R-TPC20 - knife
Three Pianelle R-TPC20 - knife
Craft knife regional product in Scarborough in use in southern Italy
The handle in a single block of polished cow horn, carries on pin the characteristic round escutcheon in brass.Blade: Stainless ino 440
Blade length: 8.5 cm
Overall length 20 cm
Weight: 38 gr.
Handle: horn cattle50071 -
Viper - Bergamasco Cocobolo by Fabrizio "Silvester" Silvestrelli - V5744CB - coltello regionale
Coltello tipico delle valli bergamasche, in uso sin dalla prima metà dell’ottocento. E' considerato uno dei più bei coltelli di antoca tradizione regionale per le sue caratteristiche forme e proporzioni.
Destinazione d'uso: Regionale / Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 57/59HRC
Trattamento Lama: -
Manicatura: Legno di Cocobolo
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 96g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2775CB -
Viper - Boletus Cocobolo Wood by Fabrizio Silvestrelli - V5600CB - Mushroom Knife
Intended use: Knife for collecting mushrooms
Type of production: industrial
Country of Production: Italy
Blade: Nitro B stainless steel
Blade finish: Satin finish
Handle: Cocobolo wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 180mm.
Weight: 100g.
Closure: double spring retention Action Stopper System (Slipjoint)
Clip: -
Sheath: leather pocket
Notes: closable mushroom brush made of badger hair - Design by Fabrizio "Silvester" SilvestrelliV5600CB -
Viper - Maremmano Corno by Fabrizio "Silvester" Silvestrelli - V5742PC - coltello regionale
Coltello tipico della maremma toscana e laziale, in uso sin dalla prima metà dell’ottocento. Presente nei reperti del museo criminologico di Roma, usato dai rivoltosi dei bagni penali di Civitavecchia.
Destinazione d'uso: Regionale / Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 57/59HRC
Trattamento Lama: -
Manicatura: Punta di corno bovino
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 90g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2774C -
Viper - Senese Corno by Fabrizio "Silvester" Silvestrelli - V5740PC - regional knife
Knife typical of the city of Siena and the Tuscan countryside, in use since the first half of the nineteenth century. It is characterized by a blade with a typical scimitar or "French" shape.
Intended use: gentleman / collection
Type of production: Industrial
Lama production: Italy
Blade: 440A stainless steel 55 / 57HRC
Blade treatment: -
Handle: bovine horn horn tip (ATTENTION: since it is a natural material, the color may change with respect to the knife photographed)
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 17mm.
Balancing: -
Weight: 104g.
Closure: double retention spring on the internal liners
Clip: -
Sheath: suede leather bag with Viper logos
Packaging: black cardboard case with silver logos, warranty certificates
Notes: numbered copies with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli2770C -
Viper - Skinner Cocobolo - V4570FCB knife
Destination of use: hunting
Type of production: Industrial
Lama production: Italy
Blade: 440 56HRC stainless steel
Blade treatment: -
Handle: cocobolo wood
Blade length: 10mm.
Blade thickness: 4mm.
Total length: 230mm.
Balancing: -
Weight: 210g.
Sheath: brown leather
Packaging: cardboard box2214 -
MKM - Malga 5 - MagnaCut & Natural Micarta - MP05MAG-NC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Malga was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Small serrated blade
* Scissors
* Wood saw
* Phillips screwdriver
Intended Use: Hiking / Multipurpose
Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 105g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-MP05MAG-NC -
MKM - Malga 6 - MagnaCut & Natural Micarta - MP06MAG-NC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Malga was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Bottle opener
* Flat screwdriver
* Box opener
* Fork
* Reamer
* Corkscrew
Intended Use: Hiking / Multipurpose
Production type: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 79g.
Locking system: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-MP06MAG-NC -
MKM - Miura - M390 Button Lock - Titanium Bronze - MI-TBR - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-TBR -
Viper - Twin FCG - Slipjoint by Fabrizio Silvestrelli - M390 - Dark Matter Gold - V6002FCG - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium insignia, Dark Matter Gold carbon fibre grips
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 176mm.
Thickness when closed: 10mm.
Weight: 77g.
Closure: Slipjoint
Sheath: Leather
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV6002FCG -
Viper - Rhino 1 - Elmax steel - Pau Santo wood by Fabrizio Silvestrelli - V5901CB - knife
Intended use: Sporting
Production type: Industrial
Blade Production: Italy
Blade: Uddeholm ELMAX SuperClean steel, HRC 59/61
Blade Treatment: Satin
Handle: Pau Santo wood
Blade length: 108mm.
Blade thickness: 4.2mm.
Length closed: 143mm.
Total length: 253mm.
Thickness when closed: 19mm.
Balance: - Weight: 280g.
Closure: Back Lock with two wire springs
Clip:Tempered AISI420 steel with stonewashed treatment
Sheath: -
Packaging: Cardboard box with Viper logos
Notes: Design by Fabrizio "Sylvester" SilvestrelliV5901CB -
Viper - Turn knife by Silvestrelli - Titanium and Walnut Wood - M390 steel - V5986NO - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin finish
Handle: in titanium with walnut wood grips
Blade length: 80mm.
Blade thickness: 4mm.
Closed length: 107mm.
Total length: 190mm.
Thick when closed: 14mm.
Weight: 113g.
Closure: Back Lock
Clip: titanium
Sheath: leather sheath
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5986NO -
Viper - Key SlipJoint by Vox - titanium and bronze carbon fiber - V5978FCB - knife
Presented at the 2019 Shot Show, Key is Viper's first dorsal spring slip-joint. Designed by Jesper Voxnaes, this closable with two-handed opening is a daily luxury to be savored without haste, a daily companion like a classy pen or a watch of fine manufacture.
The Key is offered in different handle variants, with details ranging from tradition to modernity, with or without insignia, in order to blend in with the style of its owner.
All have in common the refined hand-made filework that decorates the spring, giving the knife the typical, surprising, elegance that has always distinguished Viper “Gentleman” knives. The 3 mm thick, satin-finished Böhler M390 steel blade offers excellent and long-lasting cutting performance, accentuated by full bevel.
Intended use: Gentleman / EDC
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 60-61HRC
Blade treatment: Satin finish
Handle: Titanium GR5 and Carbon Fiber Bronze
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 185mm.
Thick when closed: 10.5mm.
Weight: 75g.
Closure: SlipJoint
Clip: -
Sheath: leather bag
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5978FCB -
MKM - Clap by Bob Terzuola - titanium and Santos wood - MKLS01-ST - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: Santos wood grips and titanium plates
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-ST -
Conaz Consigli Scarperia - Hunchback Abruzzese Cattle knife 24cm - knife
This slender-shaped knife with a curved handle derives from ancient models used by the shepherds of Abruzzo. Its adoption in the repertoire of knives manufactured in Scarperia (where the particular crease of the handle earned it the name of "hunchback") dates back to the late nineteenth century and took place without flashy changes compared to the original type, equipped with a simple spring and one-piece bovine horn handle. This model is in horn tip.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 247mm.
Weight: 107g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50024 -
Conza Consigli Scarperia - Maremmano knife 24cm Ox Horn - 50031 - knife
The first certain information on this knife dates back to 1848. A specimen, dated 1871, is kept in the State Archives of Florence, attached to the documents of a trial against a convicted person. The mark of a Scarperia manufacturer, Gustavo Buffi, is clearly visible on it, the shape of the blade is that with an angled back, also maintained in the twentieth century and present in the catalogs of various firms in Scarperia. The Maremmano is a horn tip model.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 120g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
R-MFC24 -
Consigli Scarperia - Napoletano in bovine R-NAC20 - knife
The "Neapolitan" old drives is a knife in horn tip elongated, suitable to cut the use of tip. It is not clear which of the knives of the traditional Neapolitan is inspired model of Scarperia. The general line is somewhat related to the "Maremma" in the form assumed in the Mugello, but with more slender proportions and read.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tipR-NAC20 -
Viper - Borr by Vox - Pau Santo - V4008SWPS - knife
Intended use: Allround Utility
Type of production: Industrial
Production Blade: Italy
Blade: Carbon steel D2 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Wood Pau Santo
Blade length: 125mm.
Blade thickness: 4.8mm.
Length closed: -
Overall length: 260mm.
Thickness when folded: -
Balancing: back 1cm
Weight: 260g.
Closed: -
Clip: -
Sheath: Leather
Packaging: cardboard box neutral
Notes: Design by Jesper Voxnaes12082 -
Viper - Magà knife - in cocobolo wood - V5910CB - knife
Intended use: Sports
Type of production: Industrial
Production Lama: Italy
Blade: N690 stainless steel
Blade treatment: -
Handle: cocobolo wood
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed length: 124mm.
Total length: 208mm.
Thick when closed: 15mm.
Balancing: -
Weight: 148g.
Closure: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with Viper logos
Notes: Design by Boris Manasherov - Krav Maga instructor 'V5910CB -
Viper - Slim Damascus and cocobolo - VA5353CB - knife
This wonderful gentleman from the great design features and excellent finishes, Viper reiterates that not only knows how to treat the product in detail, but also manages to pull refined aesthetic solutions and cutting-edge.
Blade: Stainless Steel Damascus
Body: Stainless Steel Damascus
Lock: Frame Lock
Closed Length: 7.5cm.
Length open: 12.5cm
Blade length: 4.5cm.
Weight: 35g.
Clip: Stainless Steel
Handle: wood cocobolo
Package: wooden box with suede interior. Certificates of authenticity and warranty. Numbered edition with serial number imprinted on the blade and certificates.10920 -
Conaz Consigli Scarperia - 24cm ox horn Zuava with blade lock - 50079 - folding knife, made in Italy
Intended use: collection
Type of production: handmade
Country of Production: Scarperia - Italy
Blade: stainless steel X50CrMoV15
Blade finish: satin-finished
Handle: ox horn and brass
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Weight: 193g.
Closure: blade lock
Packaging: cardboard box with Consigli logos
Sheath: fabric pouch
Handicrafts are beautiful because they are varied!
The colors of the materials from which crafts are made may vary from those shown in the pictures.
Horn, deer, and wood are raw materials that by their nature have distinct variability from one supply to the next-that's the beauty of fine materials. Add craftsmanship, where the artisan's hand never makes the same gesture: that's the beauty of craftsmanship. Combine all this and you have a product that is always different and unique. Always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.50079 -
Viper - Rhino - Satin Pao Santo by Fabrizio Silvestrelli - V5900CB - knife
Intended use: Sports
Type of production: Industrial
Lama production: Italy
Blade: in steel D2
Blade treatment: Satin
Handle: Wood of Pao Santo
Blade length: 110mm.
Blade thickness: 4.2mm.
Length closed: 143mm.
Total length: 257mm.
Thick when closed: 19mm.
Balancing: -
Weight: 252g.
Closure: Back Lock with two cord springs
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with Viper logos
Notes: Design by Fabrizio "Sylvester" Silvestrelli10056 -
Viper - Free - Stone Washed - Brown G10 - V4892BW knife
With Free, designed by Moreno and Thomas Franzin Rumici, Viper has set a new record in the field of security. The new system Smartlock, used for the first time on this lockable, solves all the problems that can afflict the classic architecture liner-lock. In addition, thanks to the practical cursor column, the user can choose to block completely the mechanics.
Intended use: EDC / SportsType of production: Industrial
Production Blade: Italy
Blade: Stainless D2 to 58/60HRC
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 86mm.
Blade thickness: 3.6mm.
Closed Length: 120mm.
Total length: 210mm.
Thick when closed: 14mm
Balance: -
Weight: 123g.
Lock: Liner Lock with patented SmartLock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Viper
Notes: Design by Moreno and Thomas Franzin Rumici5006 -
Conaz Consigli Scarperia - Vernante Horn horn ox - 20 cm - 50073 - knife
Traditional knife produced by master cutlers in Scarperia, place where, since 1300, the craftsmanship of Italian knives continues.
Typical Piedmont knife, in use since the early 19th century also in Liguria. Originally from the village of Vernante (Cuneo).The 420 stainless steel blade can be scimitar or straight.
On the upper part of the heel there is always the characteristic appendix with the head of a nail which, by housing a socket in the handle, allows the blade to be held steady with the knifted thumb.
Used for all agricultural and domestic work and, for the particular sharpening, also for carving wood.
The cattlemen also used it as a surgical tool to carve the belly of cattle grazing, when too much wet grass was ingested causing excessive accumulation of gas.Total length: 200 mm
Blade length: 90mm
Handle: in full polished horn
Sharpened by hand2351 -
Conza Consigli Scarperia - Maremmano knife Blade with Horn Leaf - 50030 - knife
In use for certain news until the first half of the 19th century in the Maremma area of Tuscany and Lazio. Through finds from the criminological museum in Rome, he was seen among those knives delivered by the rioters of the criminal baths of Civitavecchia to Cardinal Franco Pentini, in 1848, sent to quell a revolt.
The full horn handle is embellished with longitudinal grooves.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 201mm.
Weight: 70g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50030 -
Nieto - Toledo 15cm - 2512 coltello
Destinazione d'uso: Survival/Sportivo
Lama: in acciaio inox AN-58
Manicatura: plastica e metallo
Lunghezza lama: 135mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 240mm.
Bilanciatura: arretrata, a 1.5cm dal ramo di guardia inferiore
Peso: 78g.
Chiusura: -
Clip: -
Fodero: in pelle
Note: -0241€34.43Out of stock -
Viper - Drop Cocobolo by Fabrizio "Silvester" Silvestrelli - 5700CB coltello
Destinazione d'uso: sportivo/gentleman
Tipo di produzione: industriale
Produzione Lama: Italia
Lama: in acciaio inox Sandvik 12C27
Trattamento Lama: -
Manicatura: in Cocobolo, con liners annegati in acciaio inox
Lunghezza lama: 49mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 75mm.
Spessore da chiuso: 12mm.
Lunghezza totale: 125mm.
Bilanciatura: -
Peso: 60g.
Chiusura: Liner Lock
Clip: -
Fodero: astuccio in pelle nera
Note: design by Fabrizio Silvestrelli2648 -
Viper - Maremmano Noce by Fabrizio "Silvester" Silvestrelli - V5742NO - coltello regionale
Coltello tipico della maremma toscana e laziale, in uso sin dalla prima metà dell’ottocento. Presente nei reperti del museo criminologico di Roma, usato dai rivoltosi dei bagni penali di Civitavecchia.
Destinazione d'uso: Regionale / Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 57/59HRC
Trattamento Lama: -
Manicatura: Legno di Noce
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 85g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2774N -
Viper - Venator knife Cocobolo by Fabrizio "Silvester" Silvestrelli - V5800CB knife
Intended use: Hunting / Sports
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 57 / 59HRC
Blade treatment: -
Handle: Cocobolo
Blade length: 94mm.
Blade thickness: 3.5mm.
Length closed: 125mm.
Total length: 220mm.
Thick when closed: 18mm.
Balancing: -
Weight: 160g.
Closure: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio "Silvester" Silvestrelli2685C