Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.

The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.

This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!

Intended Use: Collector/Sportsman

Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V 
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Damascus
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 170g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 105g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Model winner of the 2016 Blade Show as "American Made Knife of the Year"

The model photographed is the Limited Edition 2019

After more than 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who for years had been designing and designing knives for friends in the special forces and Mark, who had always been involved in military equipment and tactics when he worked in the "Green Berets", decided to combine their skills and their passion with the goal to build innovative and functional knives using materials of the highest quality and made entirely in the United States.

Intended use: Collection / Sports
Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Stone Washed
Handle: titanium 6AL-4V
Blade length: 100mm.
Blade thickness: 4mm.
Length closed: 125mm
Total length: 225mm.
Weight: 168g.
Closure: FrameLock
Clip: in anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William Harsey - 2019 limited edition anodized with engravings

Destination of use: sports / tactical

Type of production: industrial
Country of production: USA
Blade: full tang, stainless steel CPM-S35VN, 61HRC
Blade treatment: two tone: satin & stonewashed
Handle: black canvas micarta
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 251mm.
Balancing: on the guard branch
Weight: 206g.
Sheath: in kydex, multiposition, with Tek-Lok type connection
Packaging: cardboard box with Sog Knives logos
Note: -

After over 40 years of service in the US Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who for years has designed and designed knives for friends in special forces, and Mark, who has always been engaged in military and tactical equipment when working in the "Green Berets", decides to combine their skills and passion with the " The goal of building innovative and functional knives using high quality materials and entirely made in the United States.

Purpose of use: Sportsman
Type of production: Semi-Industrial
Country of Origin: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: stonewash
Manicure: Titanium 6AL-4V
Blade Length: 70mm.
Blade thickness: 3.5mm.
Closed length: 100mm
Total Length: 170mm.
Weight: 81g.
Closure: FrameLock
Clip: Titanium 6AL-4V
Packing: Cardboard box with Spartan Blades logos
Notes: GTC Alpha Ball Bearing Opening - Carson Flipper System Opening - Design by Keith Edick and Curtis Iovito

This small titanium folder is the result of a desire by Spartan Blade to produce a high quality slip joint folder using as few small moving parts as possible. While attending the 2012 IWA Show in Germany, we spoke with several people who simply couldn’t own one of our larger folders due to the restrictions of knives with locks, one handed opening, and long blades. During the show, Mark and Curtis were visiting the Nuremburg Toy Museum and were impressed by some of the very small high-tech mechanisms used to make toys. It was then the idea hit them to make a slip joint that didn’t require several small fine blanked parts, allowing for a more modern look and function than the classic slipjoint. Now they had a great idea but not the full mechanism to make it work.

Later, Spartan met with Les Halpern of Halpern Titanium and explained their idea for a small modern slip joint. He became very excited as he had an idea for a similar knife using what he called “A good idea” for a mechanism. Les did some drawings explaining his idea for eliminating the traditional back spring. Normally, slip joint blades are held in position by a strong "back spring" which assists them with bias to the open or closed position. Les’ idea was to make the frame the spring with the same bias in open or closed position.

This folder eliminates the need for a back spring by using what we call an “Integral Frame Slipjoint”, the dorsal side of the frame is cut to work as a spring and holds a pin that creates a bias to close and open. The blade is opened by pushing on the tab on the blade (it is not a flipper tab!) with one hand and pulling with the thumb and forefinger on the triangle cut-out of the opposite side and hand. Additionally, the pin "locks" into the blade when held firmly by the users thumb and forefinger in in position of use but is free to rotate upon release of the frame handle.

Intended use: Sport / Collection
Production Type: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Treatment Lama: stonewash
Handle: titanio
Blade length: 48mm.
Blade thickness: 2 mm.
Closed Length: 74mm
Overall length: 121mm.
Thick when closed: 7mm
Balancing: -
Weight: 36g.
Closing: Integral Frame Slipjoint (opening and closing two-handed block blade)
Clip: Titanium
Sheath: -
Packaging: Cardboard box with logos Spartan Blades
Notes: WINNER - BLADE 2014 Most Innovative American Made Knife of the Year

Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -

Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -

Mcusta - Mari Damascus Japan - MC-0036D - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle: damascus steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 84g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: hammered steel
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 160mm.
Balancing: -
Weight: 74g.
Closure: Liner Lock
Clip: -
Sheath: -
Note: -

Destinazione d'uso: Sportivo/Escursionismo

Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio inox 5Cr13
Trattamento Lama: Verniciatura
Manicatura: Polimeri gommati
Lunghezza lama: 89mm.
Spessore lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 242mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 590g.
Chiusura: -
Clip: -
Fodero: in Nylon, da cintura, con chiusura a velcro
Confezione: Scatola di cartone con loghi Gerber e Bear Grylls
Note: Piccolo manuale di sopravvivenza incluso

Destinazione d'uso: Escursionismo Leggero

Tipo di produzione: Industriale
Produzione Lama: China
Lama: in acciaio al carbonio 1055
Trattamento Lama: Verniciatura
Manicatura: Polimeri gommati
Lunghezza lama: 236mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 380mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 385g.
Chiusura: -
Clip: -
Fodero: Cordura
Confezione: Scatola di cartone con loghi Gerber e Bear Grylls
Note: Piccolo manuale di sopravvivenza incluso

La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli giapponesi MCUSTA

Destinazione d'uso: clip ferma soldi

Tipo di produzione: taglio industriale - montaggio e finiture artigianali
Produzione Lama: Giappone
Lama: in acciaio inox AUS-8
Trattamento Lama: -
Manicatura: acciaio inox
Lunghezza lama: 50mm.
Spessore della lama: 2mm.
Lunghezza chiuso: -
Lunghezza totale: 120mm.
Bilanciatura: sul ramo di guardia
Peso: 56g.
Chiusura: Frame Lock
Clip: clip fermasoldi
Fodero: -
Note: -

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Country of production: Japan
Handle: damask steel
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 88g.
Closure: Liner Lock
Clip: -
Sheath: -
Note: -

La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli giapponesi MCUSTA

Destinazione d'uso: sporivo/collezione

Tipo di produzione: taglio industriale - montaggio e finiture artigianali
Lama: in acciaio SanMai con tagliente inox VG-10 59/60HRC e guance esterne in damasco al nickel a 33 strati
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: acciaio damasco
Lunghezza lama: 65mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 92mm.
Lunghezza totale: 163mm.
Bilanciatura: -
Peso: 86g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Note: -

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Country of production: Japan
Handle: damask steel
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 88g.
Closure: Liner Lock
Clip: -
Sheath: -
Note: -