Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fallkniven - F1 Elmax - 40th Anniversary Set - Limited Edition - knife
Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.
The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.
Intended use: allrounder utilityBlade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpenerF-F1anniv -
Fallkniven - H1 Zytel - Elmax & Thermorun - Swedish hunting knife
The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.
The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!
Intended use: huntingType of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -F-H1zElmax -
Fallkniven - F1 Pro Knife Survival Kit - USED - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory
Intended Use: Hiking / All round utilityBlade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather caseF-F1PRO-CP -
Fallkniven - F1 Wolf - VG-10W Laminated and Leather Sheath - knife
New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.
Intended use: tactical/military/huntingBlade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995.F-F1LW -
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmax -
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmax -
Fallkniven - PXLbl Folding Knife - Elmax - Black Micarta - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steelF-PXLbm -
Fallkniven - R2 Scout Survival - Elmax - knife
Intended use: Hiking / Utility
Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex typeF-R2Z-Scout -
Fallkniven - Taiga Forester - TF2 - SanMai CoS Steel - thermorun - knife
Intended use: Hiking / Hunting
Type of production: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 185g.
Scabbard: zytel
Notes: -F-TF2Z -
Fallkniven - Taiga Hunter knife - TH - SanMai CoS Steel - thermorun - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.If you look at function and most value for money, the rubber-handle Taiga blades should be preferred. Regardless of the weather and wind, the rubber handle gives a really good grip and when it comes to the steel properties they are of course as good as the knives with wooden handles.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -F-TH2Z -
Fallkniven - S1x Survival Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1X -
Fallkniven - S1xb Survival Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1XB -
Fallkniven - MB - Modern Bowie - Satin SanMai CoS - knife
Destination of use: Hiking / Hunting
Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box, ABS sealed cushion with fallkniven logos, Fallkniven DC4 sharpening stone with leather caseF-MB -
Citadel - Fidel Buffalo Slipjoint Knife - 207CR - handmade knife
Intended use: collectible/sporting
Type of production: Handcrafted
Blade Production: Cambodia
Blade: DNH7 carbon steel selective hardening 40/60HRC
Blade Finish: mirror polished
Handle: water buffalo horn
Blade length: about 80mm.
Blade thickness: about 3mm.
Length closed: about 113m.
Total length: about 190mm.
Thickness when closed: about 17mm.
Balance: -
Weight: about 58g.
Closure: -
Clip: -
Sheath: leather pouch
Packaging: -
Notes: each knife is handmade and differs minimally in size, weights and aestheticsCI-207CR -
Fallkniven - A1 BLK - knife
Intended Use: Tactical / Military
Blade: full tang stainless steel San-Mai VG-10/420J2 59HRC coated black Ceracoat 8H
Handle: Kraton
Blade length: 160mm.
Blade thickness: 6mm.
Length closed:-mm.
Total length: 280mm.
Balance: advanced to 0.5cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Zytel tactical
Notes:F-A1BLZ -
Fallkniven - A1 Zytel knife - coltello
Destinazione d'uso: sportivo/caccia/militare
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC
Manicatura: Kraton
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 280mm.
Bilanciatura: avanzata a 0.5cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in zytel
Note:F-A1Z -
Fallkniven - A2 - knife
Survival knife - News from the Swedish company larger than the A1 model.
Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.
- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheathF-A2 -
Fallkniven - F1 BLK - knife
Intended Use: Tactical / Military / Hunting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2 with black Teflon coating
Handle: It Thermorun
Blade length: 105mm.
Blade Thickness: 4.5mm.
Closed Length: - mm.
Total length: 215mm.
Balance: back to 2.5 cm from the lower branch of the guard
Weight: 150g.
Closing: -
Clip: -
Sheath: Kydex
Notes: knife official Swedish Air Force pilots since 1995F-F1BL -
Fallkniven - PHK - knife
Intended Use: Sport / Hunting
Type of production: Industrial
Production Blade: Japan
Blade: 3G stainless steel, three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Blade:
Handle: Thermorun And with stainless guard
Blade length: 127mm.
Blade thickness: 5mm.
Length closed -
Total length: 240mm.
Thick when closed: -
Balance: backward, to 1.5cm from the guard
Weight: 194g.
closing time:
Clip: -
Sheath: Zytel
Packaging: cardboard box with logos Fallkniven
Note: Each piece is numberedF-PHK -
Fallkniven - S1 knife Black Zytel - coltello
Destinazione d'uso: sportivo/caccia/militare
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC con rivestimento nero CeraCoat 8H
Manicatura: Thermorun E
Lunghezza lama: 130mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 247mm.
Bilanciatura: in corrispondenza del ramo di guardia inferiore
Peso: 190g.
Chiusura: -
Clip: -
Fodero: Zytel
Note:F-S1BLZ -
Fallkniven - S1 Zytel - knife
Intended Use: Sport / Hunting / Military
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: It Thermorun
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 247mm.
Balance: at the lower branch of the guard
Weight: 190g.
Closing: -
Clip: -
Sheath: Zytel
Notes:F-S1Z -
Fallkniven - A1xb Expedition Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -F-A1XB -
Fallkniven - A1x Expedition Knife - outdoor knife - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -F-A1X -
Citadel - True Knife - custom knife
These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. Each knife is then polished and sharp hand-polished and finished in every detail.Blade: Stainless DNH7
manicatura: Micarta
Blade length: 60 mm.
Handle Length: 70 mm.
Blade thickness: 4 mm.
Total length: 164 mm.
Sheath: Leather brown handmade with horizontal mounting of the knife
Weight: 122 g.Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.
10635 -
Citadel - Friction Folder wood - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -10633 -
Citadel - Camp Bufalo - 565 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: corno di bufalo
Lunghezza lama: circa 135mm.
Spessore lama: circa 5,5mm.
Lunghezza totale: circa 247mm.
Bilanciatura: -
Peso: circa 178g.
Chiusura: arretrata di 1,5 cm
Fodero: cuoio
Note: -3976 -
Citadel - Fidel Liner Bufalo - 207M - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: circa 78mm.
Spessore lama: circa 3mm.
Lunghezza chiuso: circa 107mm.
Lunghezza totale: circa 188mm.
Spessore da chiuso: circa 15mm.
Bilanciatura: -
Peso: circa 128g.
Chiusura: liner lock
Clip: -
Fodero: in pelle
Confezione: -
Note: -3956 -
Fallkniven - TK4 - Zytel - knife
Fallkniven Tre Kronor TK4
The "Tre Kronor" martensitic combines the latest technology with the ancient roots of the Swedish royal family.
These knives, in fact, are the only ones that can boast of a real symbol of the three crowns placed on the blade and on the beautiful wooden box containing the knife and sheath.
The steel laminate used is currently one of the best steel in industrial trade and is composed of a lamina in internal SGPS from dust, steel already used for the U2, to 62HRC coupled to two grips external VG2. The knives reveal so exceptional qualities of cut, penetration and sealing of the wire.Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Handle: Zytel
Blade length: 70 mm.
Blade Thickness: 2.5 mm.
Total length: 165 mm.
Weight: 50 g.
Closure: BackLock
Sheath: Black CorduraF-TK4