Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

I designed the ATCF in 1986-87 inspired by my experience with military and security personnel in Central America and the United States. 

The ATCF was the first tactical knife to be fully assembled with screws instead of pins and rivets.
I invented the thumb disk to facilitate opening with both hands. This became a widely copied feature of the ATCF and is used on many other knives by manufacturers around the world.

The ATCF was the first pocket knife to use a checkering on the top which, along with the guard, provides protection and a firm grip. 

The ATCF is one of the most copied knife shapes in the knife world, and as I often like to proudly say, "The ATCF is the shape...that shaped the whole industry!"

Bob Terzuola 

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production:Italy
Blade:made of CPM-MagnaCut 59/61HRC steel
Blade finish: satin finish
Handle: black micarta with anodized titanium hardware
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 126m.
Total length: 220mm.
Thickness when closed: 12mm
Weight: 130g.
Closure: Liner lock
Clip: removable, anodized titanium
Packaging: Cardboard box with Fox Knives logos, nylon pouch with "Terzuola" velcro patch
Notes: Design by Bob Terzuola

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: still in production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: None
* Marks on handle: a few small marks on clip, hardware, and aluminum spacer
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: N690Co 58HRC steel with Grade 5 titanium back (49-50HRC)
Blade finish: stonewashed
Handle: G10
Blade length: 91mm.
Blade thickness: 5mm.
Length closed 127mm.
Total length: 216mm.
Thickness when closed: 25mm.
Balance: Backward, 3cm from the top of the guard.
Weight: 186g.
Latch: Liner Lock, with manual insertion safety
Clip: Stainless steel, reversible
Notes: previously purchased knife, withdrawn from private collection

Vintage Fox collector's knife from Maniago - Limited Edition 1997

We present a one-of-a-kind example, the vintage Fox knife from Maniago, produced in 1997 and part of a limited series of only 1000 pieces. This specific knife, numbered 94, comes from a private collection and has been kept in perfect condition, retaining its original beauty and functionality intact.

Production and Origin: Made in Maniago, Italy, in 1997, part of a numbered and limited series (94/1000).
Materials: The blade is made of Damascus steel, composed of 512 hand-forged layers. The handle is made of cocobolo wood, known for its aesthetic and robust qualities.
Packaging and Authenticity: The knife is presented in a wooden box, ideal for storage or display, and accompanied by a certificate of authenticity signed by Fox's founder, Oreste Frati, which guarantees its originality and quality.
Condition: Retired from a private collection, the knife has been maintained in impeccable condition, a testament to the care and attention of its previous owners.

Intended use: Collection

Blade: 512 layer damascus stainless steel
Blade production in Italy
Handle: in cocobolo pledge
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 12mm.
Balancing: -
Weight: 222g.
Closure: Back Lock
Clips: -
Sheath: -
Note: -

The Core Tanto series is designed with knives in mind that can be relied on in any environment, thanks to a solid, sturdy blade equipped with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes

The Core Tanto series is designed with knives in mind that can be relied on in any environment, thanks to a solid, sturdy blade equipped with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes

The Core Tanto series is designed with knives in mind that can be relied upon in any environment, thanks to a solid, sturdy blade with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.

Intended use: Sporting / Tactical

Production type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes

The Core Tanto series is designed with knives in mind that can be relied on in any environment, thanks to a solid, sturdy blade equipped with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes

Translated with www.DeepL.com/Translator (free version)

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finish: Acid Stonewashed
Handle: FRN
Blade Length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos 
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes - Acid etching on the blade restores an already "worn" aesthetic appearance and each individual knife may have different finishes/colors/shades than the product in the pictures.

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finish: Acid Stonewashed
Handle: FRN
Blade Length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos 
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes - Acid etching on the blade restores an already "worn" aesthetic appearance and each individual knife may have different finishes/colors/shades than the product in the pictures.

Intended Use: Sporting

Production type: Industrial
Blade production: Italy
Blade: Becut stainless steel
Surface Treatment: Beadblasted
Handle: Green Micarta
Blade length: 8.9mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 200mm.
Thickness when closed: 14.5mm
Weight: 105g.
Closure: Liner Lock
Clip: Steel wireclip
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Bob Terzuola

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Steel CPM-S90V 59/61HRC
Blade Finish: Satin finish
Handle: Bronze anodized titanium with Ziricote wood insert
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132m.
Total length: 227mm.
Thickness when closed: 14mm
Weight: 185g.
Closure: FrameLock
Clip: removable, in sandblasted titanium
Scabbard: leather pouch, with zipper
Package: Cardboard box with Fox Knives logos 
Notes: Design by Gudy Van Poppel - Opening movement on ball bearings - Carson Flipper opening system

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Steel D2 59/61HRC
Blade finish: Black Idroglider
Handle: G10 with aluminum spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 227mm.
Thickness when closed: 14mm.
Weight: 175g.
Closure: Liner Lock
Clip: removable, in stainless steel AISI 420J2B with Black Idroglider treatment
Sheath: leather, felt and nylon pouch, with zipper
Package: Cardboard box with Fox Knives logos 
Notes: Design by Gudy Van Poppel - Opening movement on ball bearings - Carson Flipper opening system

Intended Use: Tactical / CQC

Production type: Industrial
Country of Production: Italy
Blade: Full tang, stainless steel Niolox at 59/61HRC
Blade Treatment: Black Stonewashed
Handle: G-10
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 215mm.
Weight: 165g.
Sheath: Kydex, with removable loops for horizontal carrying.
Packaging: cardboard box with Fox logos
Notes: Design by Black Rock Knives - Possibility of icepick grip using the karambit ring on the tang.

Intended Use: Tactical / CQC

Production type: Industrial
Country of Production: Italy
Blade: Full tang, stainless steel Niolox at 59/61HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total lenght: 215mm.
Weight: 165g.
Sheath: ABS, with removable loops for horizontal carrying.
Package: Cardboard box with Fox logos
Notes: Design by Black Rock Knives - Possibility of icepick grip using the karambit ring on the tang.

Intended use: Sports / Hiking

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade finish: Black Idroglider
Handle: G10 with 9 rubber O-rings
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 149g.
Sheath: in kydex, Taco type, with multi-position Tek-Lok attachment
Packaging: Cardboard box with Fox logos
Notes: Design by Tommaso Rumici - Equipped with bit holder for screwdrivers, flat tip screwdriver, philips screwdriver - Rear carabiner

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Italy
Blade: in Becut 57 / 58HRC stainless steel with very high resistance to oxidation and corrosion
Blade Finish: Black Idroglider
Handle: G10
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 225mm.
Weight: 207g.
Sheath: leather, for vertical port
Packaging: Cardboard box with Fox logos
Notes: Design by Russ Kommer

Destination of use: sports

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: black idroglider
Handle: Carbon Fiber with stainless steel liners
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 210mm.
Thick when closed: 18mm
Weight: 160g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Kmrj Kmaxrom

Destination of use: sports

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: black idroglider
Handle: G10 with stainless steel folders
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 210mm.
Thick when closed: 18mm
Weight: 160g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Kmrj Kmaxrom

Destination of use: sports

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: stonewashed
Handle: G10 with stainless steel folders
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 210mm.
Thick when closed: 18mm
Weight: 160g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Kmrj Kmaxrom

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel M390 58 / 60HRC
Surface treatment: Satin finish, and mirror polishing on controfilo
Handle: Titanium Anodized
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: 115mm.
Overall length: 200mm.
Thickness when closed: 13mm
Weight: 148g.
Closure: Framelock
Clip: Titanium Anodized
Packaging: cardboard box with Fox Knives logos
Notes: Design by Tashi Bharucha - Opening with Carson Flipper system - Movement on ball bearings

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel M390 58 / 60HRC
Surface treatment: Satin finish, and mirror polishing on controfilo
Handle: Titanium Anodized
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: 115mm.
Overall length: 200mm.
Thickness when closed: 13mm
Weight: 148g.
Closure: Framelock
Clip: Titanium Anodized
Packaging: cardboard box with Fox Knives logos
Notes: Design by Tashi Bharucha - Opening with Carson Flipper system - Movement on ball bearings

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: in good condition, with a few small marks that do not affect its use.
* Commercially available: discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Some non-removable adhesive residue.
* Marks on handle: Small signs of wear on the clip's paintwork.
* Box: Absent
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Emergency / Rescue / Multipurpose Tactical

Country of Production: Italy
Blade: N690Co stainless steel with DLC treatment
Handle: G10
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 150mm.
Total length: 240mm.
Weight: 178g.
Closure: Liner Lock
Clip: teflonized steel black reversible
Sheath: cordura, belt-mounted
Notes: emergency rear belt cutter, glass breaker on tang

Intended Use: Tactical

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel 58HRC N690Co
Handle material: wood
Blade length: 90mm.
Blade thickness: 4mm.
Closed Length: 120mm.
Total length: 208mm.
Thick when closed: 18mm.
Balance: -
Weight: 132g.
Lock: Liner Lock
Clips: stainless steel
Sheath: -
Packaging: cardboard box with Fox logos
Notes: -

Fox - N.E.R.O. Nighthawk CobalTitanium - FX117CT knife

Intended Use: Tactical

Type of production: Industrial
Production Blade: Italy
Blade: 58HRC steel N690Co back with Titanium Grade 5 (49-50HRC)
Treatment Blade: Shot peening
Handle material: G10
Blade length: 91mm.
Blade thickness: 5mm.
Closed Length 127mm.
Total length: 216mm.
Thick when closed: 25mm.
Balance: Situated away, at 3 cm from the top of the Guard
Weight: 186g.
Lock: Liner Lock, with safe hand installation
Clip: Stainless steel, reversible
Sheath: -
Packaging: Cardboard box with Fox logos
Notes: -

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Tactical / Collection

Type of production: Industrial
Blade production: Italy
Blade: N690Co 58HRC stainless steel
Blade Treatment: DLC
Handle: G-10 and titanium
Blade length: 95mm. partially serrated edge
Blade thickness: 4mm.
Closed length: 130mm.
Total length: 225mm.
Thickness when closed without clip: 10mm.
Balancing: -
Weight: 152g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -

I designed the ATCF in 1986-87 inspired by my experience with military and security personnel in Central America and the United States. 

The ATCF was the first tactical knife to be fully assembled with screws instead of pins and rivets.
I invented the thumb disk to facilitate opening with both hands. This became a widely copied feature of the ATCF and is used on many other knives by manufacturers around the world.

The ATCF was the first pocket knife to use a checkering on the top which, along with the guard, provides protection and a firm grip. 

The ATCF is one of the most copied knife shapes in the knife world, and as I often like to proudly say, "The ATCF is the shape...that shaped the whole industry!"

Bob Terzuola 

Intended Use: Tactical/Sporting

Type of production: Industrial
Country of Production:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: stone washed
Handle: tianio acid stone washed
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 126m.
Total length: 220mm.
Thickness when closed: 12mm
Weight: 120g.
Closure: Liner lock
Clip: removable, titanium
Packaging: Cardboard box with Fox Knives logos, nylon pouch with "Terzuola" velcro patch
Notes: Design by Bob Terzuola