Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fox - Anzu by Les George - PVD MagnaCut & Bronze Aluminum - FX-560 ALBR - pocket knife
Les George designed the ANZU to have maximum handle ergonomics, ensuring a firm grip; the MAGNACUT drop point blade maximizes the cutting capacity and corrosion resistance of the steel. The VERSO Lock opening mechanism gives this knife maximum efficiency. Dual thumb pins and VERSO lock make the knife easy to open and close with both hands. The clip allows for easy carrying, making the knife always ready for use.
Intended Use: SportingType of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: Black PVD
Handle: anodized aluminum with stainless steel inner folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 123g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stonewashed stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560ALBR -
Fox - Italico Sheepfoot - FX-540TIBL - M390 & Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Never used, but with three marks on titanium anodization.
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: 3 scratches on blue anodizing.
* Box: Present
* Scabbard: Pouch with zipper.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: M390 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel hardware
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm.
Weight: 95g.
Closure: FrameLock
Clip: flush, AISI 302 stainless steel, removable and reversible
Sheath: zippered pouch, leatherette
Packaging: cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540TIBL-CP -
Fox - Anzu by Les George - PVD MagnaCut & Carbon Fiber - FX-560 CFOR - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production:Italy
Blade:Steel CPM-MagnaCut 59/61HRC
Blade finish: Black PVD
Handle: 3K carbon fiber with stainless steel inner folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 105g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stainless steel Black Idroglider
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560CFOR -
Fox - Italico Drop - FX-540OD - Black Top Shield N690Co & OD Green FRN - pocket knife
"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening systemFX-540OD -
Fox - Italico Drop - FX-540B - Black Top Shield N690Co & Black FRN - pocket knife
"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening systemFX-540B -
Fox - Zero 2.0 Desert Warrior by Jens Anso - Black Top Shield & OD Green - FX-311OD - knife
The Zero 2.0 Desert Warrior, an evolution of the iconic Zero, is the culmination of years of research for the perfect everyday carry knife. The new version is an homage to the rugged landscapes and harsh environments in which adventurers often find themselves. The earthy coloring of the handles and unique blade finishes evoke the spirit of the desert, a place where resilience, adaptability and strength are paramount.
The addition of an opening hole in the blade transforms this knife into a one-handed wonder. The handle is a work of art in itself, featuring the distinctive Anso Texture. This knife is more than a tool: it is a trusted companion for those who dare to explore, conquer and thrive in any environment.
Welcome to the next chapter of the Zero Legacy!
Intended Use: Sporting
Type of production: industrial
Country of manufacture: Italy
Blade: stainless steel Becut 56/58HRC
Blade finish: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 97m.
Total length: 160mm.
Sleeve thickness: 15mm.
Weight: 56g.
Locking mechanism: back lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jens AnsoFX-311OD -
Fox - Zero 2.0 Desert Warrior by Jens Anso - Black Top Shield & Black - FX-311B - knife
The Zero 2.0 Desert Warrior, an evolution of the iconic Zero, is the culmination of years of research for the perfect everyday carry knife. The new version is an homage to the rugged landscapes and harsh environments in which adventurers often find themselves. The earthy coloring of the handles and unique blade finishes evoke the spirit of the desert, a place where resilience, adaptability and strength are paramount.
The addition of an opening hole in the blade transforms this knife into a one-handed wonder. The handle is a work of art in itself, featuring the distinctive Anso Texture. This knife is more than a tool: it is a trusted companion for those who dare to explore, conquer and thrive in any environment.
Welcome to the next chapter of the Zero Legacy!
Intended Use: Sporting
Type of production: industrial
Country of manufacture: Italy
Blade: stainless steel Becut 56/58HRC
Blade finish: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 97m.
Total length: 160mm.
Sleeve thickness: 15mm.
Weight: 56g.
Locking mechanism: back lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jens AnsoFX-311B -
Fox - TRIBAL K Fixed Karambit by Doug Marcaida - FX-803 - Knife
Intended Use: Tactical / Military
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Black Idroglider
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 97g.
Sheath: kydex, with double Ulti-Clip attachment system
Packaging: cardboard box with Fox logos
Notes: Design by Doug MarcaidaFX-803 -
Fox - PIKAL - Folding Karambit by Giuliano Ron - FX-826 - Knife
The Fox Pikal is a folding tactical knife specifically designed for martial arts practitioners. It was created with the collaboration of the personal defense instructor Giuliano Ron who, after two years of severe tests, combined the advantages of the Pikal style (handle with blade pointing down and edge facing the person) with the Karambit (rear ring for the index)
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 182mm.
Weight: 113g.
Clip: reversible and removable, in painted stainless steel
Packaging: Cardboard box with Fox logos
Notes: Design by Giuliano RonFX-826 -
Fox - TRIBAL K - Karambit Knife by Doug Marcaida - FX-802
Intended use: Tactical / Collection
Production type: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 50mm of cutting edge and 70mm of blade
Blade thickness: 3mm
Overall length: 150mm
Weight: 105g
Clip: Steel
Packaging: Cardboard box with Fox logos
Notes: Design by Doug MarcaidaFX-802 -
Fox - Chnops by Gobbato - FX-543ALB - M390 and Carbon Fiber - knife
Intended use: sports/collection
Production type: Industrial
Country of Production: Italy
Blade: stainless steel M390 60/62HRC
Blade finish: Black PVD
Handle: Carbon Fiber
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, bronze oxidized titanium
Packaging: Cardboard box with Fox Knives logos and faux leather zippered case
Notes: Design by Riccardo GobbatoFX-543CFBR -
Fox - Chnops by Gobbato - FX-543ALG - Becut and Aluminum Orange - knife
Intended use: sporting/collection
Production type: Industrial
Country of Production: Italy
Blade: Becut 56/58HRC stainless steel
Blade finish: Black Top Shield
Handle: Anodized aluminum
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo GobbatoFX-543ALO -
Fox - Chnops by Gobbato - FX-543ALG - Becut and Aluminum Green - knife
Intended use: sporting/collection
Production type: Industrial
Country of Production: Italy
Blade: Becut 56/58HRC stainless steel
Blade finish: Black Top Shield
Handle: Anodized aluminum
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo GobbatoFX-543ALG -
Fox - Chnops by Gobbato - FX-543ALB - Becut and Aluminum Black - knife
Destinazione d'uso: sportivo/collezione
Tipo di produzione: Industriale
Paese di produzione: Italia
Lama: in acciaio inox Becut 56/58HRC
Finitura lama: Black Top Shield
Manicatura: Alluminio Anodizzato
Lunghezza lama: 70mm.
Spessore lama: 3mm.
Lunghezza chiuso: 102m.
Lunghezza totale: 180mm.
Spessore manicatura: 12mm
Peso: 78g.
Meccanismo di chiusura: Liner Lock
Clip: amovibile e reversibile, in acciaio inox
Confezione: Scatola di cartone con loghi Fox Knives
Note: Design by Riccardo GobbatoFX-543ALB -
Fox - AKA Spear Point by D. Simonutti - Elmax Top Shield - FX-554B - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Italy
Blade: full tang, stainless steel Elmax 60/62 HRC
Blade treatment: Black Top Shield
Handle: G-10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 140mm.
Weight: 60g.
Sheath: made of Kydex, with Ulti-Clip attachment
Packaging: cardboard box with Fox logos
Notes: Design by Denis SimonuttiFX-554B -
Fox - AKA Drop Point by D. Simonutti - Elmax Top Shield - FX-553B - knife
Intended Use: Tactical
Production type: Industrial
Country of Production: Italy
Blade: full tang, stainless steel Elmax 60/62 HRC
Blade treatment: Black Top Shield
Handle: G-10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 140mm.
Weight: 65g.
Sheath: made of Kydex, with Ulti-Clip attachment
Packaging: cardboard box with Fox logos
Notes: Design by Denis SimonuttiFX-553B -
Fox - Spore - mushroom knife - olive wood - FX-409OL - Fungaiolo
Intended use: Mushroom knife
Blade: 12C27 stainless steel
Handle: Eucalyptus wood
Blade length: 65mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 175mm.
Balancing: -
Weight: 98g.
Closure: Liner Lock
Clip: in stainless steel
Sheath: -
Notes: Resealable Nylon Brush - Design by Riccardo GobbatoFX-409-OL -
Fox - Saturn by D. Simonutti - Acid Stonewashed Aluminum - FX-551ALG - knife
Intended Use: Sporting / Collection
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Acid Stonewashed
Handle: Anodized Aluminum
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Aluminum machined from billet
Packaging: box with Fox Knives logos, zippered nylon pouch, PVC patch with velcro, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551ALG -
Fox - Saturn by D. Simonutti - Black Aluminum - FX-551ALB - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade treatment: Idroglider Blackwashed
Handle: Anodized aluminum
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Aluminum machined from billet
Packaging: box with Fox Knives logos, zippered nylon pouch, PVC patch with velcro, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551ALB -
Fox - Saturn by D. Simonutti - Satin Titanium - FX-551Ti - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 58/60HRC
Blade treatment: Satin finish
Handle: Titanium with PVD Blacwashed treatment
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives logos, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551Ti -
Fox - Terzuola - Liner Lock Micarta - FX-525MI - knife
Intended Use: Sporting
Production type: Industrial
Blade production: Italy
Blade: Becut stainless steel
Surface Treatment: Beadblasted
Handle: Green Micarta
Blade length: 8.9mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 200mm.
Thickness when closed: 14.5mm
Weight: 105g.
Closure: Liner Lock
Clip: Steel wireclip
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Bob TerzuolaFX-525MI -
Fox - Livri SlipJoint - Natural Micarta - M390 steel - FX-273MI - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-273MI -
Fox - Libar SlipJoint - Natural Micarta - M390 steel - FX-582MI - Knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-582MI -
Fox - Gentleman 1494 Kaleidoscope knife Santa Fe Stoneworks - vintage collection knife
Intended use: collection
Blade: 440A stainless steel
Lama Italia production
Handle: in mana-worked wood by Santa Fè Stoneworks
Blade length: 60mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 170mm.
Balancing: -
Weight: 83g.
Closure: Blade Lock
Clip:
Sheath:
Notes: knife produced around 1998 by Fox in collaboration with Santa Fè StoneworksFO-F-C-KA -
Fox - Italicus by ADG - FX-540G10OD - G10 OD Green - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade finishing: Satin finish
Handle: G10 with AISI 303 stainless steel bolts and screws
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm
Weight: 95g.
Closure: Liner Lock
Clip: wire, in stainless steel AISI 302, removable and reversible
Sheath: pouch with zipper, in cordura
Package: Cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540G10OD -
Fox - Italicus by ADG - FX-540NA - Natural Micarta - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade finish: Satin finish
Handle: micarta with AISI 303 stainless steel folders and screws
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm
Weight: 90g.
Closure: Liner Lock
Clip: wire, in stainless steel AISI 302, removable and reversible
Sheath: pouch with zipper, in cordura
Package: Cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540NA -
Fox - Italicus by ADG - FX-540TIB - PVD Stonewashed Titanium - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Acid Stone Washed
Handle: Acid Stone Washed Titanium with AISI 303 stainless steel screws
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm
Weight: 90g.
Closure: FrameLock
Clip: wire, in stainless steel AISI 302 with PVD treatment, removable and reversible
Scabbard: leatherette pouch with zipper
Package: Cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540TIB -
Fox - Baby Core by Vox - FX-608TI - Acid Stonewashed Titanium - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Acid Stone Washed
Handle: Acid Stone Washed Titanium with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 110g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: wire, AISI 302 stainless steel, removable and reversible
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening systemFX-608TI -
Fox - Baby Core by Vox - FX-608CF - Carbon Fiber - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Satin
Handle: Carbon Fiber with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 60g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: wire, AISI 302 stainless steel, removable and reversible
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening systemFX-608CF -
Fox - Baby Core by Vox - FX-608OR - Orange & Dark Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Dark Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608OR -
Fox - Baby Core knife by Vox - FX-608BL - Blue & Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608BL -
Fox - Baby Core by Vox - FX-608R - Red & Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608R -
Fox - Baby Core by Vox - FX-608B - Black & Dark Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Dark Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608B -
Fox - Libar SlipJoint knife - Olive - M390 steel - FX-582OL - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: olive wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 52g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-582OL -
Fox - Libar SlipJoint knife - Carbon - FX-582CF - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Carbon Fiber
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 38g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-582CF -
Fox - Livri SlipJoint knife - Ziricote Wood - FX-273ZW - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Ziricote Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-273ZW -
Fox - Livri SlipJoint knife - Carbon Fiber - FX-273CF - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Carbon Fiber
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-273CF -
Fox - Libar SlipJoint knife - Green Micarta - FX-582 - Knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-582 -
Fox - Livri SlipJoint knife - Green Micarta - FX-273 - Knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-273 -
Fox - Fixed Blade Karambit - G10 Black - FX-598 - Knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Italy
Blade: full tang in N690Co stainless steel
Blade treatment: Black Idroglider
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 175mm.
Balancing: Set back
Weight: 95g.
Sheath: kydex, with belt clips made of synthetic material
Packaging: cardboard box with Fox FKMD logos
Notes: Fixed blade version of the FX-599 folding Mini Karambit modelFX-598 -
Fox - Rescue Karambit G10 UV Yellow - FX-599 RSY - Knife
Intended use: rescue / emergency
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Stonewashed
Grip: steel folders, G10 grips sensitive to UV rays
Blade length: 62mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 178mm.
Thick when closed: 13.3mm.
Weight: 112g.
Opening: Carson Flipper system / opening hole on the blade / opening simil emerson wave in pocket extraction
Washers: stainless steel, with ball bearings
Closure: Liner Lock, with additional manual safety
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Crasher on the front of the handle - quick-release carabiner in the rear ring - Phillips screwdriver on the upper guard branchFX-599RSY -
Fox - Rescue Karambit G10 Nero - FX-599 RS - Coltello
Intended use: rescue / emergency
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Teflon coating
Grip: steel folders, G10 grips
Blade length: 62mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 178mm.
Thick when closed: 13.3mm.
Weight: 112g.
Opening: Carson Flipper system / opening hole on the blade / opening simil emerson wave in pocket extraction
Washers: stainless steel, with ball bearings
Closure: Liner Lock, with additional manual safety
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Crasher on the front of the handle - quick-release carabiner in the rear ring - Phillips screwdriver on the upper guard branchFX-599RS -
Fox - Black Bird Karambit by Bastinelli and Bram Frank - Black - FX-591 - knife
Purpose: Sportsman / Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Black Idroglider
Handle: G10
Blade Length: 65mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total Length: 170mm.
Closure thickness: 14mm.
Balance: -
Weight: 98g.
Opening: KOR Kinetic Opening Ramp system by Bram Frank
Washers: Brass, with ball bearings
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Sheath: -
Packing: Cardboard box with Fox logos
Notes: Aluminum ring - Design by BastinelliFX-591 -
Fox - BB Drago Piemontes FRN Orange by Bastinelli - FX-519OR - Knife
intended use: sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: N690 stainless steel
Blade treatment: Satin finish
Handle: FRN Fiberglass Reinforced Nylon
Blade length: 47mm.
Blade thickness: 3 mm.
Closed Length: 85mm.
Overall length: 105mm.
Thickness when closed: 10mm
Weight: 30g.
Closure: Slipjoint - lock free
Clip: None
Sheath: Leather pocket
Packaging: Cardboard box with logos Fox Knives
Notes: Design by Bastinelli KnivesFX-519O -
Fox - BB Drago Piemontes FRN Grey by Bastinelli - FX-519GR - Knife
intended use: sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: N690 stainless steel
Blade treatment: Satin finish
Handle: FRN Fiberglass Reinforced Nylon
Blade length: 47mm.
Blade thickness: 3 mm.
Closed Length: 85mm.
Overall length: 105mm.
Thickness when closed: 10mm
Weight: 30g.
Closure: Slipjoint - lock free
Clip: None
Sheath: Leather pocket
Packaging: Cardboard box with logos Fox Knives
Notes: Design by Bastinelli KnivesFX-519GR -
Fox - BB Drago Piemontes Ziricote by Bastinelli - FX-519ZW - Knife
Intended use: Sports
Type of production: Industrial
Production Country: Italy
Blade: N690 stainless steel
Blade treatment: Satin finish
Handle material: Wood Ziricote
Blade length: 47mm.
Blade thickness: 3 mm.
Closed Length: 85mm.
Overall length: 105mm.
Thickness when closed: 14mm
Weight: 50g.
Closure: Slipjoint - lock free
Clip: None
Sheath: Leather pocket
Packaging: Cardboard box with logos Fox Knives
Notes: Design by Bastinelli KnivesFX-519ZW -
Fox - Slim Dragotac Piemontes FRN Grey by Bastinelli - FX-518GR - knife
intended use: sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: N690 stainless steel
Blade Treatment: satin finish
Handle: FRN Fiberglass Reinforced Nylon
Blade length: 81mm.
Blade thickness: 3 mm.
Closed Length: 128mm.
Overall length: 182mm.
Thickness when closed: 11mm
Weight: 52g.
Closure: Slipjoint - lock free
Clip: absent
Sheath: Leather pocket
Packaging: cardboard box with Fox Knives logos
Notes: Design by Bastinelli KnivesFX-518GR -
Fox - BB Drago Piemontes FRN Black by Bastinelli - FX-519 - Knife
intended use: sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: N690 stainless steel
Blade treatment: Satin finish
Handle: FRN Fiberglass Reinforced Nylon
Blade length: 47mm.
Blade thickness: 3 mm.
Closed Length: 85mm.
Overall length: 105mm.
Thickness when closed: 10mm
Weight: 30g.
Closure: Slipjoint - lock free
Clip: None
Sheath: Leather pocket
Packaging: Cardboard box with logos Fox Knives
Notes: Design by Bastinelli KnivesFX-519 -
Fox - Slim Dragotac Piemontes FRN Orange by Bastinelli - FX-518O - knife
intended use: sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: N690 stainless steel
Blade Treatment: satin finish
Handle: FRN Fiberglass Reinforced Nylon
Blade length: 81mm.
Blade thickness: 3 mm.
Closed Length: 128mm.
Overall length: 182mm.
Thickness when closed: 11mm
Weight: 52g.
Closure: Slipjoint - lock free
Clip: absent
Sheath: Leather pocket
Packaging: cardboard box with Fox Knives logos
Notes: Design by Bastinelli KnivesFX-518O -
Fox - Slim Dragotac Piemontes FRN Black by Bastinelli - FX-518 - knife
intended use: sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: N690 stainless steel
Blade Treatment: satin finish
Handle: FRN Fiberglass Reinforced Nylon
Blade length: 81mm.
Blade thickness: 3 mm.
Closed Length: 128mm.
Overall length: 182mm.
Thickness when closed: 11mm
Weight: 52g.
Closure: Slipjoint - lock free
Clip: absent
Sheath: Leather pocket
Packaging: cardboard box with Fox Knives logos
Notes: Design by Bastinelli KnivesFX-518 -
Fox - Slim Dragotac Piemontes Ziricote by Bastinelli - FX-518ZW - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: N690 stainless steel
Blade Treatment: satin finish
Handle material: Wood ziricote
Blade length: 81mm.
Blade thickness: 3 mm.
Closed Length: 128mm.
Overall length: 182mm.
Thickness when closed: 13mm
Weight: 80g.
Closure: Slipjoint - lock free
Clip: absent
Sheath: Leather pocket
Packaging: cardboard box with Fox Knives logos
Notes: Design by Bastinelli KnivesFX-518ZW -
Fox - Dart Tanto Karambit Training by Doug Marcaida - FX-597TK - knife
Fox - Dart Tanto Karambit Training by Doug Marcaida - FX-597TK - knife
Intended use: Tactical Training
Type of production: Industrial
Production Lama: Italy
Blade: stainless steel 420 with tip and rounded blade
Blade treatment: -
Handle: G-10
Blade length: 64mm.
Blade thickness: 3mm.
Closed Length: 120mm.
Overall length: 185mm.
Thick when closed: -
Balancing: -
Weight: 104g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Fox FKMD
Notes: Developed by Doug Marcaida and Lad Mandiola - Opening Wave by EmersonFX-597TK -
Fox - Ron Lake Folding G10 - FX-RL01 G10 - knife
Intended use: Sport / Hunting
Type of production: Industrial
Production Country: Italy
Blade: stainless steel N690Co
Blade treatment: Satin
Handle: G10
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Overall length: 182mm.
Thick when closed: -
Balancing: -
Weight: 116g.
Closure: Back Lock system with additional security
Clip: -
Sheath: leather, with vertical through belt
Packaging: Cardboard box with logos Fox Knives
Notes: design by Ron Lake12383 -
Fox - Chiroptera Karambit by Derespina - FX-590 - knife
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox N690Co
Trattamento Lama: Teflonata
Manicatura: G-10
Lunghezza lama: 55mm.
Spessore lama: 3mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 155mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 110g.
Chiusura: Liner Lock
Clip: Amovibile e reversibile, in acciaio inox
Fodero: -
Confezione: Scatola di cartone con loghi Fox FKMD
Note: Realizzato per Derespina Knives USAFX-590 -
Citadel - Fidel Buffalo Slipjoint Knife - 207CR - handmade knife
Intended use: collectible/sporting
Type of production: Handcrafted
Blade Production: Cambodia
Blade: DNH7 carbon steel selective hardening 40/60HRC
Blade Finish: mirror polished
Handle: water buffalo horn
Blade length: about 80mm.
Blade thickness: about 3mm.
Length closed: about 113m.
Total length: about 190mm.
Thickness when closed: about 17mm.
Balance: -
Weight: about 58g.
Closure: -
Clip: -
Sheath: leather pouch
Packaging: -
Notes: each knife is handmade and differs minimally in size, weights and aestheticsCI-207CR -
Fox - Accetta da Caccia 682 con manico legno - escursione
Fox - Accetta
Accetta multiuso adatta per utilizzi caccia, campeggio e anche come strumento da lancio. Buona bilanciatura, manicatura ergonomica, fodero da cintura incluso.
Lama: Acciaio inox 420
Manicatura: legno
Lunghezza lama: 140 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 370 mm.
Peso: 385 g.
Fodero: in cuoioFX-682 -
Fox - FKMD - 49° Capricorn - FX-ALSR-49 - knife
Designed to solve emergency and survival situations, it is particularly suitable for its characteristics as equipment for pilots, aircraft crews and paratroopers.
This knife is currently supplied to the 49th "Capricorn" Air Cavalry Helicopter Squadron Group stationed at the "Francesco Baracca" barracks in Casarsa della Delizia (PN) with tasks of armed reconnaissance, armed escorts, attack, deep attack, precision attack, fire support, suppression of air defense centers and security. They also contributed from the sky to the ground security of the Italian contingents in Somalia, Albania, Kosovo.
Intended use: Tactical
Blade: N690Co stainless steel
Lama Italy production
Handle: G-10 black
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 145mm.
Total length: 240mm.
Balancing: -
Weight: 230g.
Closure: Liner Lock
Clip: removable, in stainless steel
Sheath: rigid, thigh, in green nylon
Notes: emergency belt cutter, wood saw with liner lock closure - double safety lock to prevent blade closureFX-ALSR-49 -
Fox - Machete Macio II - 680 - knife
Fox - Macio 2
Machete suitable for strong use, as camping and other outdoor activities. Well balanced (toward the tip), easy to use due to its ergonomic handle.
Blade: stainless steel 425
Handle: hard rubber
Blade Length: 290 mm.
Blade Thickness: 3 mm.
Total Length: 445 mm.
Weight: 500 g.
Sheth: leatherFX-680 -
Fox - Anzu by Les George - PVD Stonewashed MagnaCut & G10 - FX-560 G10B - pocket knife
Les George designed the ANZU to have maximum handle ergonomics, ensuring a firm grip, MAGNACUT drop point blade maximizes cutting capacity and steel corrosion resistance. The VERSO Lock opening mechanism gives this knife maximum efficiency. Dual thumb pins and VERSO lock make the knife easy to open and close with both hands. The clip allows for easy carrying, making the knife always ready for use.
Intended Use: Tactical/SportingType of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: Black Stonewashed PVD
Handle: G10 with internal stainless steel folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm.
Weight: 113g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stainless steel Black Idroglider
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560G10B -
Fox - Anzu by Les George - MagnaCut & Blue Aluminum - FX-560 ALOR - knife
ANZU is the new knife from Fox Knives inspired by the creature of the Mesopotamian religions; a powerful figure who challenged the authority of the gods by stealing from the god Enlil the Table of Destinies, an object that, when possessed, confers the power to control the Universe. Through this act of rebellion, Anzu became an example of power, strength, precision and determination, characteristics that also distinguish the new Fox Knives knife designed by Les George.
Intended Use: SportingType of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: stone washed
Handle: anodized aluminum with internal stainless steel folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 120g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stonewashed stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560ALOR -
Fox - Zero 2.0 Desert Warrior by Jens Anso - Coyote Top Shield & Coyote Tan - FX-311CT - knife
The Zero 2.0 Desert Warrior, an evolution of the iconic Zero, is the culmination of years of research for the perfect everyday carry knife. The new version is an homage to the rugged landscapes and harsh environments in which adventurers often find themselves. The earthy coloring of the handles and unique blade finishes evoke the spirit of the desert, a place where resilience, adaptability and strength are paramount.
The addition of an opening hole in the blade transforms this knife into a one-handed wonder. The handle is a work of art in itself, featuring the distinctive Anso Texture. This knife is more than a tool: it is a trusted companion for those who dare to explore, conquer and thrive in any environment.
Welcome to the next chapter of the Zero Legacy!
Intended Use: Sporting
Type of production: industrial
Country of manufacture: Italy
Blade: stainless steel Becut 56/58HRC
Blade finish: Coyote Top Shield
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 97m.
Total length: 160mm.
Sleeve thickness: 15mm.
Weight: 56g.
Locking mechanism: back lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jens AnsoFX-311CT -
Fox - Zero 2.0 Desert Warrior by Jens Anso - Bead Blasted & Wolf Grey - FX-311GY - knife
The Zero 2.0 Desert Warrior, an evolution of the iconic Zero, is the culmination of years of research for the perfect everyday carry knife. The new version is an homage to the rugged landscapes and harsh environments in which adventurers often find themselves. The earthy coloring of the handles and unique blade finishes evoke the spirit of the desert, a place where resilience, adaptability and strength are paramount.
The addition of an opening hole in the blade transforms this knife into a one-handed wonder. The handle is a work of art in itself, featuring the distinctive Anso Texture. This knife is more than a tool: it is a trusted companion for those who dare to explore, conquer and thrive in any environment.Welcome to the next chapter of the Zero Legacy!
Intended Use: SportingType of production: industrial
Country of manufacture: Italy
Blade: stainless steel Becut 56/58HRC
Blade finish: Bead Blasted
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 97m.
Total length: 160mm.
Sleeve thickness: 15mm.
Weight: 56g.
Locking mechanism: back lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jens AnsoFX-311GY -
Fox - Chnops by Gobbato - FX-543DBL - Damasteel and PVD Titanium - knife
Intended use: sporting/collection
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel damsco Damasteel DS93X Gysinge 62/64HRC
Blade finish: -
Handle: Stonewashed PVD titanium
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm.
Weight: 105g.
Locking mechanism: Liner Lock
Clip: removable and reversible, purple oxidized titanium
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo GobbatoFX-543DBL -
Fox - Spore - mushroom knife - Eucalyptus wood - FX-409 - Mushroom
Intended use: Mushroom knife
Blade: 12C27 stainless steel
Handle: Eucalyptus wood
Blade length: 65mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 175mm.
Balancing: -
Weight: 98g.
Closure: Liner Lock
Clip: in stainless steel
Sheath: -
Notes: Resealable Nylon Brush - Design by Riccardo GobbatoFX-409 -
Fox - Saturn knife by D. Simonutti - Black PVD Titanium - FX-551TiPVD - knife
Intended Use: Sporting / Collection
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel M390 58/60HRC
Blade treatment: PVD Blacwashed
Handle: Titanium with PVD Blacwashed treatment
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 160mm.
Weight: 130g.
Closure: Fingers Safe Opening System
Clip: Titanium machined from solid
Packaging: box with Fox Knives logos, warranty certificate
Notes: Design by Denis Simonutti - Winner of the 2021 Atlanta Blade Show as "Knife of the Year" and "Imported Knife of the Year"FX-551TiPVD -
Fox - Italicus by ADG - FX-540TIBL - Blue Anodized Titanium - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel screws
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm
Weight: 95g.
Closure: FrameLock
Clip: wire, in stainless steel AISI 302, removable and reversible
Sheath: leatherette pouch with zipper
Package: Cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540TIBL -
Fox - Baby Core by Vox - Blue - SanMai SPG2 Special Edition - CO-608BL - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to combine the pocket knife Baby Core by Vox with a Japanese powder steel (sintered) and rolled steel (SanMai) by Takefu Steel.
For this project we have chosen to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to ensure exceptional cutting performance and durability of the sharpening, while ensuring a remarkable resilience and resistance to oxidation given by the lamination process of the blade.
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Finish: Satin
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 79g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system - Exclusive version by Coltelleria Collini, Sprint Run, with Japanese Takefu Steel SPG2 Rolled Stainless Steel.The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.FX-CO608BL -
Fox - Baby Core by Vox - Black - SanMai SPG2 Special Edition - CO-608B - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to combine the pocket knife Baby Core by Vox with a Japanese powder steel (sintered) and rolled steel (SanMai) by Takefu Steel.
For this project we have chosen to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to ensure exceptional cutting performance and durability of the sharpening, while ensuring a remarkable resilience and resistance to oxidation given by the lamination process of the blade.
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Finish: Satin
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 79g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system - Exclusive version by Coltelleria Collini, Sprint Run, with Japanese Takefu Steel SPG2 Rolled Stainless Steel.The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.FX-CO608B -
Fox - Baby Core by Vox - FX-608MC - Natural Micarta - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Acid Stone Washed
Handle: Natural Micarta with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 80g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening systemFX-608MC -
Fox - Alaskan Hunter Folding by Russ Kommer - FX-622B - knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: Italy
Blade: in Becut 57 / 58HRC stainless steel with very high resistance to oxidation and corrosion
Blade finish: Black Idroglider
Handle: G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 198mm.
Thick when closed: 10.3mm.
Weight: 129g.
Closing: Liner Lock
Clip: stainless steel, removable, with Black Idroglider finish
Packaging: Cardboard box with Fox logos
Notes: Design by Russ KommerFX-622B -
Fox - MK Tool Karambit by Doug Marcaida - FX-800MK - knife
Intended use: Rescue / Emergency
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Black Idroglider
Grip: steel folders with G10 grips
Blade length: 57mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 184mm.
Thickness when closed: -
Balancing: -
Weight: 130g.
Closure: Back Lock with additional safety
Clip: Removable and reversible, in stainless steel
Sheath: -
Packaging: cardboard box with Fox FKMD logos
Notes: Made by Doug Marcaida and Lad Mandiola - Wave opening by Emerson - Skull Crasher on the front of the handle - snap hook for quick coupling in the rear ring - phillips screwdriver on the upper guard branch - flat screwdriver on the tip of the blade - belts emergency - 3 3/8 ", 1/2" and 1/4 "hexagon wrenches in the center of the bladeFX-800MK -
Fox - Police G10 Black - FX-PM3 - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy - Maniago (PN)
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Satin
Grip: G10 with steel liners
Blade length: 84mm.
Blade thickness: 3.4mm.
Length closed: 116mm.
Total length: 200mm.
Weight: 155g.
Closure: Back Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Detachable tapered crasher placed on the shankFX-PM3