Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Kevin Smock is an award-winning industrial designer who is making waves with his visionary handcrafted custom knives. Based on his SK23, the Spyderco Smock translates his innovative style into a high-quality production knife.

The Smock's most unique feature, however, is the push-button release of its high-strength Compression Lock mechanism, which allows the knife to close securely and easily without getting your fingers near the edge of the blade. Subtle, innovative and distinctly different, the Smock reflects Kevin Smock's unique approach to knife making.

Intended Use: Sporting/EDC

Type of production: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S30V
Blade Finish: double satin finish, both horizontal and vertical
Handle: laminated carbon fiber and G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 11mm.
Weight: 104g.
Closure: Compression Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: front flipper opening system on ball bearings - new 2024 version with revised and increased pivot

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in good condition
Available in stores: NO
Sharpening: Resharpened by our internal laboratory
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES
Checked and Certified by our internal laboratory
A pollywog represents metamorphosis in the animal kingdom, adapting and changing its form to survive in its environment. The same principle applies here. The Spyderco Poliwog CLIPIT® thrives in a small-knife-friendly environment while keeping the features necessary to excel in a harsh, heavy cutting and performance setting. Its distinctive opened-ended Ball Bearing Lock™ exposes the knife's inner workings for easy cleaning and rates as one of Spyderco's highest strength locking mechanisms. Pulling back on the ball unlocks the blade ambidextrously from either side of the knife.

The hand settles on the curved handle positioning the index finger into a choil that optimizes control and generates less fatigue and pressure on the hand during cutting. Made from VG-10, the blade has a hollow-ground edge with a weight reducing swedge-grind extending mid-spine to the tip. It is available in PlainEdge. Its ambidextrous wire-tension pocket clip sets the Poliwog tip-up in the pocket.

Intended use: Sporting / EDC

Type of production: Industrial
Blade Production: Japan
Blade: in VG10 stainless steel
Blade Treatment: -
Handle: in steel
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 145mm.
Thickness when closed: -
Balance: -
Weight: 116g.
Closure: Ball Bearing Lock™
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: Like New
Available in stores: YES
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: YES
Checked and Certified by our internal laboratory
Intended use: Sport / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: In CTS-XHP stainless steel with full flat sharpening
Blade treatment: satin finish
Handle: FRN Fiberglass Reinforced Nylon bearing
Blade length: 71mm.
Blade thickness: 2mm.
Closed length: 91mm.
Total length: 163mm.
Closed thickness: 7.5mm.
Weight: 60g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Note: Design by Sal Glesser

Spyderco's Smock Knife is one of the most anticipated knives of recent times. Crafted in collaboration with renowned knifemaker Kevin Smock, the knife features a unique design that combines an elegant front opening and a push-button actuated Compression Lock locking mechanism.

Kevin Smock, a knife enthusiast since childhood, began customizing stock knives in 2012 and has subsequently developed his skills in craft knife making. His passion for knives is combined with his experience in product design, leading to the creation of innovative and unconventional knives.

Intended use: Sport/EDC

Type of production: Industrial
Blade production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: -
Handle: Carbon Fiber
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 200mm.
Closed thickness: 11mm.
Balancing: -
Weight: 104g.
Closure: Compression Lock
Clips: Stainless steel
Scabbard: -
Packaging: Cardboard box with Spyderco logos
Note: -

Intended Use: Sporting

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CTS BD-1
Blade treatment: Black DLC
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: lighter and cheaper version of the Para 3 model with G10 handle

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory.
* Marks on blade: slight marks near the handle, due to blade opening.
* Marks on handle: No.
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory




Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN (fiberglass reinforced nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: made of FRN, integrated into the handle
Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight signs of wear, especially on clip
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory



Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: G10 Foliage Green and Stainless Steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 90g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2000
* Sharpening: Factory.
* Marks on blade: Small marks due to blade opening.
* Marks on handle: Small marks on metal pins.
* Box: Yes, original
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory



Intended Use: Sporting / EDC / Collection

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8
Blade Finish: Satin finish
Handle: G-10 with stainless steel liners
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 170mm.
Weight: 65g.
Closure: Back Lock
Clip: painted stainless steel, removable
Packaging: white cardboard box, no logos, with serial number, production code and Spyderco bar code
Notes: Knife produced in June 1997 - remained in production only from 1997 to 2000, experimental version of the Calypso Jr. model.

Knife withdrawn from a private collection - Condition like new - Re-sharpened by our sharpening laboratory - Original box - Knife checked and certified by our internal laboratory

Intended use: Sports

Type of production: industrial
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Production Lama: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Notes: Flat Ground sharpening

Knife collected from private collection - Absolutely like new, old production CPM-S30V steel - Never used - Original sharpening - Original box, slightly marked, with certificates - Knife checked and certified by our internal laboratory

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: like new knife, taken from a private collection

Intended Use: Sport / Collection

Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Balancing: -
Weight: 70g.
Locking System: Back Lock
Clip: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: -

Intended use: Sports

Type of production: industrial
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade treatment: satin finish
Country of production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 66g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steel

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CTS BD-1 stainless steel
Blade treatment: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed length: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush, in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: lighter and cheaper version of the Para 3 C223GP model

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Teflon coating
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 16mm.
Weight: 105g.
Closure: Liner Lock
Clip: Removable, multi-position, Teflon coated stainless steel
Packaging: cardboard box with Spyderco logos
Note: -

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S45VN
Blade treatment: PVD
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S110V Powder Steel
Blade treatment: Satin
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: sprint run edition

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: CTS-XHP stainless steel with full flat sharpening
Blade treatment: satin finish
Handle: FRN Fiberglass Reinforced Load-bearing nylon
Blade length: 71mm.
Blade thickness: 2mm.
Length closed: 91mm.
Total length: 163mm.
Thick when closed: 16mm.
Weight: 60g.
Closure: Back Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Sal Glesser

Purpose: Sports

Type of production: Industrial
Country of production: Japan
Blade: Stainless Steel VG-10
Blade Treatment: Satin
Handle: Stainless Steel and G-10
Blade Length: 70mm.
Blade thickness: 3mm.
Closed length: 98mm.
Total Length: 167mm.
Closed thickness: 14mm.
Weight: 96g.
Closure: Ball Bearing Lock
Clip: Removable and reversible, stainless steel
Packing: cardboard box with Spyderco logos
Notes: Design by Eric Glesser - Reshapes the iconic and ergonomic lines of DODO and SCORPIUS models

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S45VN Powder Steel
Blade treatment: PVD
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended Use: Sport / Collection

Type of production: Industrial
Country of production: USA
Blade: CTS Maxamet Tool Steel 67/68HRC
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Weight: 70g.
Locking System: Back Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: limited edition sprint run

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S45VN Powder Steel
Blade treatment: Satin
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended use: Sport

Type of production: Industrial
Production Lama: China
Blade: 8Cr13MoV stainless steel
Treatment Blade: Teflon
Handle: Stainless steel and G-10
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Total length: 195mm.
Thick when closed: 16mm.
Balance: -
Weight: 116g.
Lock: Liner Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Intended use: Utility / Hunting

Type of production: Industrial
Country of production: Seki - Japan
Blade: Stainless Steel VG-10
Blade treatment: Satin finish
Handle: G10 liners with embedded stainless steel
Blade length: 72mm.
Blade thickness: 2.5mm.
Closed Length: 106mm.
Overall length: 175mm.
Thick when closed: 10mm.
Weight: 102g.
Closure: Front Lock
Clip: reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Design by Paul Alexander

Intended Use: Sport / Collection

Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-S35VN Powder Steel
Blade treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Balancing: -
Weight: 70g.
Locking System: Back Lock
Clip: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: -

Intended Use: Collection

Type of production: Industrial
Blade: Damascus steel laminate DPS15 with sharp VG-10 58HRC
Treatment Lama: -
Production Lama: Japan
Handle: Titanium brushed
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Balancing: -
Weight: 88g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Note: the blade is made in a special steel with 31 layers produced by Takefu Special Steel Company Ltd.

Intended Use: Sporting / Collection

Production Type: Industrial
Blade production: USA
Blade: Stainless steel CPM-S30V Powder Steel
Blade Treatment: -
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 98mm.
Total length: 175mm.
Thickness when closed: 14mm.
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -

Intended Use: Sport / EDC

Type of production: Industrial
Blade Production: Japan
Blade: stainless steel ZDP-189 67HRC
Blade treatment: -
Handle: FRN British Racing Green
Blade length: 49mm.
Blade thickness: 2.5mm.
Closed Length: 64mm.
Overall length: 113mm.
Thick when closed: 8mm.
Balancing: -
Weight: 20g.
Locking system: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Use: Tactical / EDC

Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: G-10 Black
Blade length: 75mm.
Blade thickness: 3.5mm.
Closed Length: 107mm.
Overall length: 183mm.
Thickness when folded: -
Balancing: -
Weight: 130g.
Lock: Back Lock
Clip: Multi position and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Alexandru "Dialex" Diaconescu

Use: Tactical / EDC

Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: G-10 Black
Blade length: 75mm.
Blade thickness: 3.5mm.
Closed Length: 107mm.
Overall length: 183mm.
Thickness when folded: -
Balancing: -
Weight: 130g.
Lock: Back Lock
Clip: Multi position and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Alexandru "Dialex" Diaconescu

Destinazione d'uso: Collezione

Tipo di produzione: industriale (lama) ed artigianale (impugnatura)
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: interamente realizzata a mano da SantaFe Stoneworks, in Marmo Picasso e Madreperla
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 145g.
Chiusura: Back Lock
Clip: amovibile, in acciaio inox
Fodero: -
Note: impugnatura artigianale in pietra dura realizzata con la tecnica del mosaico

Green - C11FPGR - knife
Blade: 58HRC VG-10
Stainless Steel Handle: FRN Blade
Length: 75mm.
Blade Thickness: 2.5mm.
Overall Length: 180mm.
Weight: 66g.
Lock: Back lock
Clips: Stainless Steel
Sheath: - Notes: -

Destinazione d'uso: Sportivo/Utility

Tipo di produzione: industriale
Lama: Full Tang, in acciaio inox VG-10
Produzione Lama: Japan
Manicatura: FRN (Fiberglass Reinforced Nylon)
Lunghezza lama: 70 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 171 mm.
Bilanciatura: -
Peso: 108g.
Fodero: in Zytel, con clip/passante multiposizione in Kydex

Spyderco - Lil Matriarch knife - C162SBK - knife

Intended use: EDC / Sports
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Thick when closed: -
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
package:
Cardboard box with logos Spyderco
Notes: -

Destinazione d'uso: Sportivo Tipo di produzione: industriale Lama: in acciaio inox VG-10 58HRC Trattamento Lama: - Produzione Lama: Japan Manicatura: Black FRN con liners annegati in acciaio inox Lunghezza lama: 75mm. Spessore della lama: 2.5mm. Lunghezza chiuso: 107mm. Lunghezza totale: 180mm. Bilanciatura: - Peso: 72g. Chiusura: Back Lock Clip: amovibile, multiposizione, in acciaio inox Fodero: - Note: -

Spyderco - C08S Harpy - knife

Intended use: Sport

Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10 (suitable for cut tops - ropes - networks - the machine belts etc.).
Treatment Lama: -
Handle material: steel
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: 95mm.
Total length: 164mm.
Thick when closed: 8mm
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes:

Spyderco - Cricket Steel - C29P - knife

Intended use: Sport

Blade: stainless steel VG-10
Handle: Stainless Steel
Blade length: 48mm.
Blade Thickness: 2mm.
Closed Length: 68mm.
Total length: 117mm.
Balance: -
Weight: 48g.
Closure: Frame Lock
Clip: Stainless steel
Sheath: -
Notes: -

Destination of use: sports

Type of production: industrial
Country of production: Japan
Blade: stainless steel ZDP-189 65 / 67HRC
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon) with stainless steel embedded liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Thickness closed: 9.9mm.
Weight: 72g.
Locking system: Back Lock
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Spyderco logos
Note: -

Intended Use: Sporting / Collection

Production Type: Industrial
Blade production: USA
Blade: Stainless steel CPM-S30V Powder Steel
Blade Treatment: -
Handle: G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 98mm.
Total length: 175mm.
Thickness when closed: 14mm.
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -

Spyderco - Native Plain Edge FRN - C41PBK - knife

Intended use: Sport

Blade: Stainless steel CPM-S30V
Handle: FRN
Blade length: 78mm.
Blade Thickness: 3mm.
Length closed: -
Total length: 175mm.
Balance: -
Weight: 74g.
Closure: Back Lock
Clip: Reversible, Stainless Steel
Sheath: -
Notes: -

Intended Use: Sport / EDC

Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel CPM-S30V
Treatment Lama: -
Handle: Titanium
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 180mm.
Thick when closed: 16mm.
Balance: -
Weight: 96g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Intended Use: Sport / EDC

Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel CPM-S30V
Treatment Blade: -
Handle: G10 Blue
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 184mm.
Thick when closed: 16mm.
Balancing: -
Weight: 100g.
Fastening: Bolt Action
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Intended Use: Sport / Tactical

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Lama: -
Handle: FRN
Blade length: 51mm.
Blade thickness: 3mm.
Closed length is 79mm.
Total length: 128mm.
Thick when closed: -
Balance: -
Weight: 46g.
Closing: -
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: Lock-free blade

Spyderco - Tasman Salt - C106PYL - knife

Intended Use: Dive / Sports

Type of production: industrial
Blade: Stainless nitrogen H1
Treatment Lama: -
Blade Production: Japan
Handle: FNR
Blade length: 75mm.
Blade Thickness: 2mm.
Closed Length: 100mm.
Total length: 172mm.
Balance: -
Weight: 56g.
Closure: Back Lock
Clip: removable and reversible stainless steel
Sheath: -
Note: This knife has a steel blade PH (precipitation hardened) that will not rust as it contains only 0.15% carbon and about 0.10% on the nitrogen making it particularly suitable for use underwater and marine. The product ratings are therefore no data considering this primary use.