Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new, never taken out of its packaging.
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Coltelleria Collini exclusive - Available in only 33 numbered examples on blade and box

Intended use: collection / EDC / CQD

Type of production: industrial, limited
Blade: Japanese laminated stainless steel (San Mai) with cryogenically hardened 61.5HRC CoS cutting edge; with double concave shank in the strong of the blade
Blade treatment: satin finish
Country of manufacture: Italy
Handle: made of Titanium, machined from solid, with integral Frame Lock system with removable casement and safety made of stainless steel
Blade length: 75mm.
Blade thickness: 6.3mm.
Total length: 180mm.
Weight: 186g.
Clip: stainless steel, reversible, deep pocket type and with tip up port
Notes: tapered Skull Crasher engaged in the tang - Limited and numbered edition of only 33 pieces serialized on the blade and box
Box: cardboard, numbered, with ExtremaRatio and Coltelleria Collini logos

Folding knife made upon specific requests of the department of the Italian Army 185 ° RAO ( Target Acquisition Regiment ) and is now included the eponymous department . The knife supplied differs from the calendar for the total lack of writings or logos on the blade.

Limited Edition RAO model characterized by a satin blade in Japanese rolled steel produced by Takefu Steel. to the central plate and the 420J2 (56 HRC) In the specific CoS it is used to 61,5HRC (Cobalt Special deemed superior mechanically by 25% compared to the already appreciated VG10) for the two side plates, in order to have a very high capacity cutting but at the same time a remarkable resilience and resistance to oxidation.
folding knife made upon specific requests of the Italian Department of the Army 185th RAO (Regiment Acquisition Objectives) and currently supplied to the homonymous department. The knife supplied differs from that only civil to the total lack of written or logos on the blade.

Intended Use: Military / Tactical

Type of production: Industrial
Production Lama: Italy
Blade: (San Mai) Japanese-rolled stainless steel with sharp CoS to 61,5HRC in cryogenic tempering
Lama Treatment: Testudo
Handle material: anticorodal 4.5mm
Blade length: 118mm.
Blade Thickness: 6.3mm.
Length closed: 142
Overall length: 261mm.
Balancing: -
Weight: 335g.
Closure: front modified lock - threaded safety pin
Clip: -
Sheath: tactical nylon by Vega with M.O.L.L.E. attacks suitable for both the closed knife that open - color BLACK
Notes: sharpening the included Diamond

A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces

Intended Use: collection / EDC / CQD

Type of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria Collini

A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces

Intended Use: collection / EDC / CQD

Type of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria Collini

A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces

Intended Use: collection / EDC / CQD

Type of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria Collini

For this new exclusive collaboration with Extrema Ratio we decided to propose a best seller in the world of cutlery, the Shrapnel model. It's a satin blade version but the most important thing is that has been used, for the first time in Italy, the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used the CoS (Cobalt Special, considered mechanically superior by 25% compared to the already appreciated VG10) for the central plate and the 420J2 (55 HRC) for the two side plates, in order to have a high cutting capacity, but at the the same time a remarkable resilience and resistance to oxidation.

A First Production Run of 30 pieces has been made.

SHRAPNEL OG is a truly versatile “back up” knife with marked combat qualities. Its leaf-shaped blade is flat ground at a characteristically low angle to a wide, extraordinarily sharp edge. The included hard sheath can be worn vertically, horizontally or obliquely (at a 45° angle). Tthe SHRAPNEL OG hilt design does not include a guard.

Use: tactical , sports , hiking , collection
Blade: Full , Japanese- rolled stainless steel ( San Mai) with sharp CoS to 61,7HRC in cryogenic tempering
Handle: Forprene
Blade length: 90mm.
Blade Thickness: 6.5 mm.
Overall length: 210mm.
Balancing: back to 0.5cm . by guard branch
Weight: 214g.
Sheath: ABS with Tek - Lok multi attack
Notes: cardboard box with Extremaratio logos and certificate

Clad Metal
It is a composite metal partly or entirely diffusion bonded together of different kinds of metals.

Metal composition shows higher performance which respective materials alone do not possess and the performance complements opposite characteristics of each material, that is "compound characteristics"

Clad Effect on Cutleries

Toughness
Like Japanese swords, clad metal is hard to break or bend, thanks to the toughness as the hard steel part is clad with soft steels.
Easy to work on
Cladded structure is easy to apply on such works as forging, grinding, sharpening or polishing to make a sharp blade.

Improved corrosion resistance　　　　
Proper material combination generates electrical potential difference and it enhances the corrosion resistance on blade edge.

Better and long lasting sharpness
Steel after forging pressure makes the microscopic structure denser and improves the sharpness and ensures long lasting performance.

Resource saving
As high class steel is used only for necessary part, it is perfectly cost effective..

Easy distortion correction
As the steel is bonded with soft steel materials, its blade is hard to break and the distortion correction is easy.

Easy drilling and welding after heat treatment
Though the steel gets harder after heat treatment, the soft steel never loses its softness, enabling the material to be drilled or welded.

Design improvement
Laminated patterns or Damascus patterns appear from basis materials which are bonded with different kinds of metals.