Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
RH Preyda - Arkansas Translucent Ultrafine - SMALL - Natural Stone to Sharpen
Natural stone for sharpening, oil, type Arkansas Translucent Ultrafine
Made in USA, Made of Novaculite of the highest quality and cleverly cut at the artisan level, it guarantees very high performances both in sharpening and polishing. Contained in a practical wooden box, it is not fastened or glued and is inserted into a comfortable silicone non-slip support.
Ideal for rewinding of free razors or for cleaning blades.
Dimensions: 15 x 5 x 1.17 cm.
Quality level: Very highARK30062 -
RH Preyda - Arkansas Water Stone #6000/#1000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30946 -
RH Preyda - Arkansas Water Stone #8000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30934 -
RH Preyda - Arkansas Water Stone #6000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30933 -
RH Preyda - Arkansas Water Stone #3000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30932 -
RH Preyda - Arkansas Water Stone #1000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30931 -
RH Preyda - Arkansas Water Stone #400 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30930 -
RH Preyda - Arkansas Translucent Ultrafine - LARGE - Natural Stone to Sharpen
Natural stone for sharpening, oil, type Arkansas Translucent Ultrafine
Made in USA, Made of Novaculite of the highest quality and cleverly cut at the artisan level, it guarantees very high performances both in sharpening and polishing. Contained in a practical wooden box, it is not fastened or glued and is inserted into a comfortable silicone non-slip support.
Ideal for rewinding of free razors or for cleaning blades.
Dimensions: 20 x 5 x 1.17 cm.
Quality level: Very highARK30063 -
Kauhavan Puukkopaja - 95 Knife - Lappi Puukko
handmade knives made in the Finnish city Kauhava.
These knives are a perfect combination between tradition and quality construction.
Intended Use: Hunting / Sporting
Type of production: handmade
Blade: carbon steel 59HRC
Production Country: Finland
Handle: birch and bone, with brass bolsters
Blade length: 95mm.
Blade thickness: 3mm.
Overall length: 210mm.
Balance: on guard branch
Weight: 106g.
Sheath: Brown leather
Notes: -KA14163 -
Kauhavan Puukkopaja - 77 Knife - Knife
Kauhavan Puukkopaja - 77 Knife - Knife
Handmade knives made in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.Intended Use: Hunting / Sports
Type of production: crafts
Blade: carbon steel 59HRC
Production Lama: Finland
Handle: Birch, bone with brass bolster
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 195mm.
Balance: on the branch of the guard
Weight: 100g.
Sheath: Brown leather
Notes:KA14162 -
Kauhavan Puukkopaja - 95 Knife - Knife
Kauhavan Puukopaja - 95 Knife - Knife
Handmade knives made in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.Intended Use: Hunting / Sports
Type of production: crafts
Blade: carbon steel 59HRC
Production Lama: Finland
Handle: Birch, bone with brass bolster
Blade length: 100mm.
Blade Thickness: 3mm.
Overall length: 220mm.
Balance: on the branch of the guard
Weight: 125g.
Sheath: Brown leather
Notes:KA14160 -
Quartermaster - QSE-6TT - Mr. Roper Texas Tea Tanto - knife
Use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Texas Tea
Handle: Titanium brushed
Blade length: 76mm.
Blade thickness: 4.7mm.
Overall length: 190mm.
Thickness when folded: 12mm.
Balancing: -
Weight: 115g.
Lock: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Specimen edition liminata individually numbered on the blade and box12208€225.41Out of stock -
Quartermaster - QSE-3DLC - Sonny Crockett DLC - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: DLC
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12207€237.70Out of stock -
Quartermaster - QSE-5RS - Mr. Roper Rubbed Steel - Knife
Use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: Titanium brushed
Blade length: 76mm.
Blade thickness: 4.7mm.
Overall length: 190mm.
Thickness when folded: 12mm.
Balancing: -
Weight: 115g.
Lock: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Specimen edition liminata individually numbered on the blade and box12071€0.00Only -99 leftOut of stock -
Quartermaster - QSE-2MV - Ricardo Tubbs Screen Printed - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12070€270.49Out of stock -
Quartermaster - QSE-3 - Sonny Crockett - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12048€229.51Out of stock -
Quartermaster - QSA-1 - Boss Hog - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-154CM
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 16.5mm.
Balancing: -
Weight: 284g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12047€241.80Out of stock -
Quartermaster - QTR-6TT - Orville Rick Wright - Texas Tea - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CTS-BD4P
Treatment Lama: Texas Tea
Handle: G-10
Blade length: 76mm.
Blade thickness: 5mm.
Total Length: 19.6mm.
Thick when closed: 13mm.
Balancing: -
Weight: 181g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12046€229.51Out of stock -
Quartermaster - QTR-3LT - Templeton Face Peck - Limo Tint - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-154CM
Treatment Lama: Limo Tint Full Black
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12045€0.00Only -99 leftOut of stock -
Quartermaster - ALF-1 - Titanium Neck Knife
Intended use: Tactical / Neck
Type of production: Industrial
Production Blade: 100% USA
Blade: Titanium Beta
Treatment Blade: -
Handle: -
Blade length: 50mm.
Blade thickness: 4mm.
Total length: 76mm.
Thick when closed: -
Balancing: -
Weight: 18g.
Closure: -
Clip: -
Sheath: Kydex, thermoformed vacuum neck
Packaging: Cardboard box with logos Quartermaster
Notes: -10958€81.97Out of stock -
Quartermaster - QTR-8TT - John Quayle Higgins III - Texas Tea - knife
Intended use: Tactical
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless Steel sintered CTS-BD4P
Treatment Blade: Texas Tea
Handle: G-10
Blade length: 89mm.
Blade thickness: 5mm.
Overall length: 241mm.
Thick when closed: 13mm.
Balancing: -
Weight: 213g.
Lock: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10957€245.90Out of stock -
Quartermaster - QTR-4TT - John Hannibal Smith - Texas Tea - knife
Intended use: Tactical
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless Steel sintered CPM-154CM
Treatment Blade: Texas Tea
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 279mm.
Thick when closed: 19mm.
Balancing: -
Weight: 329g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10956€221.31Out of stock -
Quartermaster - QTR-4 - John Hannibal Smith - knife
Intended use: Tactical
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless Steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 279mm.
Thick when closed: 19mm.
Balancing: -
Weight: 329g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10955€200.82Out of stock -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
Quartermaster - QTR-7 - Thomas Magnum - knife
Intended use: Tactical
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered Carpenter CTS BD-4P Alloy
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 267mm.
Thick when closed: -
Balancing: -
Weight: 275g.
Closure: -
Clip: -
Sheath: Kydex Ghost transparent, thermoformed vacuum, fixed with Malice Clips, MOLLE compatible
Packaging: Cardboard box with logos Quartermaster
Note: Specimen liminata edition individually numbered on the blade and box10881€262.30Out of stock -
Quartermaster - QTR-5TT - Karambit Theodore T.C. Calvin - Texas Tea - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Texas Tea Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 50mm.
Blade thickness: 5mm.
Overall length: 152mm.
Thick when closed: 13mm.
Balancing: -
Weight: 148g.
Lock: Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10880€168.03Out of stock -
Quartermaster - QTR-5 - Karambit Theodore T.C. Calvin - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 50mm.
Blade thickness: 5mm.
Overall length: 152mm.
Thick when closed: 13mm.
Balancing: -
Weight: 148g.
Lock: Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10879€155.74Out of stock -
Quartermaster - QTR-3 - Templeton Face Peck - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10878€172.13Out of stock -
Quartermaster - QTR-3 - Templeton Face Peck - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10877€0.00Only -99 leftOut of stock -
Quartermaster - QTR-3TT - Templeton Face Peck - Texas Tea - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Texas Tea Stone Washed
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and boxQTR-3TT€139.34Only 0 leftOut of stock -
Quartermaster - QTR-1TT - H.M. Murdock - Texas Tea - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Texas Tea Stone Washed
Handle: G-10
Blade length: 65mm.
Blade thickness: 5mm.
Overall length: 150mm.
Thick when closed: 17mm.
Balancing: -
Weight: 147g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10875€102.46Out of stock