Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

In everyday life or outside of it, the Magnum Field Flipper is an EDC knife for all occasions.

The pocket knife stands out above all by its tactically unobtrusive appearance. The black-coated 440A stainless steel blade and military green Micarta handle are attractive features. The blade opens smoothly with a ball-bearing flipper system or with a thumb pin on either side and closes reliably with a linerlock. Supplied with a lanyard hole and tip-up clip.

Type of manufacture: industrial

Blade: 440A 56HRC stainless steel
Blade finish: Teflon coated
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.8mm.
Total length: 183mm.
Weight: 108g.
Closure: liner lock
Clip: removable, stainless steel
Sheath: -
Notes: -

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: stainless steel and G10 folders
Blade length: 93mm.
Blade thickness: 3.2mm.
Total length: 218mm.
Weight: 159g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
Notes: Design by Vaeringi - tungsten carbide backstop - ball bearing opening system

Intended Use: Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: stainless steel and G10
Blade length: 85mm.
Blade thickness: 2.7mm.
Total length: 205mm.
Weight: 127g.
Clip: Removable, stainless steel machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch 
Notes: Design by Kornel Kiss - ball bearing opening system

Intended Use: Sporting/collection

Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and birch root
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening system

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and micarta
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening system

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and "Fat Carbon" carbon fiber
Blade length: 93mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 139g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: Design by Les George - Numbered and limited edition of 500 pieces - ball bearing opening system

Christmas is the time of year when traditions and special moments are celebrated with enthusiasm. One of these traditions is the advent calendar, and Boker has decided to revisit it in a unique way.

The complete kit for a high-quality pocket knife

Inside, you will find everything you need to assemble a high-quality pocket knife, ready to be assembled. Every day a piece of the knife, which will allow you, in the end, to build your custom knife. The kit includes elements such as the blade, various handles for customizing the handle, precision screws, useful accessories, and some surprises that will make every day a unique emotion.

Intended use: EDC/Gentleman

Type of production: Industrial
Country of production: East
Blade: in D2 steel
Blade treatment: satin
Handle: micarta and carbon fiber
Blade length: 80mm.
Blade thickness: 3.0mm.
Total length: 185mm.
Weight: 71g.
Closure: back lock
Packaging: Cardboard box with Boker logos
Notes: Design by Raphaël Durand

Bowie knives originated in the United States in the early 19th century and were considered reliable work knives, even occasionally used in combat. Typical of these fixed knives is the massive blade, with a characteristic design, usually more than 15 cm long and with a guard to protect the hand.

As a variant suitable for everyday use, the Chuck Gedraitis Boker Plus Pocket Bowie combines the fascination of the Bowie knife with the flexibility and compactness of a pocket knife. Equipped with a satin-finished Bowie blade made of D2, the three-finger knife easily copes with all day-to-day tasks.

The knife opens via the pull-out thumb stud, while the stainless steel linerlock reliably locks the blade in place.

The ergonomic handle with brown Burlap micarta scales promises a secure grip and gives the knife a touch of the Wild West.

The clip is beautifully integrated into the rear handle and allows tip-up carrying.

Supplied with a high quality nylon case.

Intended use: Hunting / Utility

Type of production: Industrial
Country of production: Taiwan
Blade: D2 58HRC steel
Blade finish: Satin
Handle: micarta
Blade length: 70mm.
Blade thickness: 3mm.
Total length: 158mm.
Weight: 78g.
Sheath: clip
Packaging: cardboard box with Boker logos and nylon case
Note: -

The great success of the Boker M4 Sherman Damascus, due not only to the history of the historic Damascus steel but also to the design, prompted us to use this as the basis for a performing and pleasant EDC with a titanium framelock, which, despite the metallurgy of the blade powders, also carries a real piece of M4 Sherman Damascus.

For the blade of the Sherman EDC we used Magnacut for the first time, which is not without reason celebrated as a "miracle steel". Unlike the usually used tool steels, this steel was specially developed for the production of knives. The three desirable properties of a steel - edge retention, toughness and resistance to rust (stainless in the DIN category) - represent a conflict of goals. To make the steel resistant to rust, the addition of chromium is necessary, which makes the structure coarse, brittle and prone to fracture under normal conditions. The high hardness, which has a positive influence on the cutting life, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it was possible to achieve a very fine microstructure and thus a high toughness and shock load tolerance. The addition of nitrogen plays a central role here.

The central structural difference compared to the M4 Damascus model is the elegantly integrated flipper, which allows the blade to open smoothly with a small impulse.

A special highlight of the Boker Sherman EDC is the protruding Damascus backspacer, which is equipped with a lanyard hole in an elongated slot design. The Damascus of the backspacer was forged from various materials from Chad Nichols' M4 Sherman tank production in the Customized Ladder pattern and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: MagnaCut steel
Handle: in steel and micarta
Blade length: 75mm.
Blade thickness: 3mm.
Total length: 178mm.
Weight: 95g.
Clip: stainless steel
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: Certificate of Guarantee - Case in gray box

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel VG10
Blade treatment: satin finish
Handle: G10
Blade length: 84mm.
Blade thickness: 2.5mm.
Total length: 191mm.
Weight: 43g.
Clip: stainless steel, machined from solid, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: -

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: 110-layer stainless damascus steel
Blade treatment:-
Handle:stainless damascus steel
Blade length: 64mm.
Blade thickness: 2mm.
Total length: 141mm.
Weight:40g.
Clip:stainless damascus steel, removable
Closure: FrameLock with stainless steel clapper
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: 110-layer stainless damascus steel
Blade treatment: satin finish
Handle: Titanium 
Blade length: 78mm.
Blade thickness: 3.8mm.
Total length: 173mm.
Weight: 76g.
Clip: stainless steel, removable
Closure: FrameLock with stainless steel clapper
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: black
Handle: G10
Blade length: 86mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 201mm.
Weight: 145 g.
Clip: in stainless steel, with gold anodizing
Closure: lining lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Note: design by Jesper Voxnaes

Intended Use: Training

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 420
Blade Finish: Stonewashed
Handle: Stainless steel
Blade Length: 114mm.
Blade thickness: 3.7mm.
Length closed: 138mm.
Total length: 252mm.
Weight: 124g.
Closure: T-latch
Clip: -
Package: Cardboard box with Boker Plus logos
Notes: -

Intended Use: Hunting / Utility

Production type: Industrial
Country of Production: Argentina
Blade: ful tang in stainless steel N695Co 58HRC
Blade finish: Satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.1mm.
Total length: 293mm.
Weight: 374g.
Scabbard: leather
Package: cardboard box with Boker logos
Notes: -

Boker Tiger-Damascus adds a very special model to the series of pocket knives steeped in history. Collector's knife with a historical past, a true piece of living history, which combines high quality craftsmanship with authentic materials. Known worldwide as the Tiger, the Panzerkampfwagen VI was used by the Wehrmacht from the late summer of 1942. It is considered to be one of the most famous tanks in history, despite its modest production number of only 1350 units and consequent low importance. strategic. The development of the heavy tank can be traced back to 1937 and series production began in August 1942. Today there are only seven units preserved, on display worldwide.

The tank parts used for the knife blade come from a Tiger I of the Schwere Panzerabteilung 502, which was destroyed in combat in Latvia in the summer of 1944 in a wooded area near the town of Bauska. Based on the wreck found at the original excavation site, it was determined that this Tiger was one of the first models produced.

The straight-cut Boker Tiger-Damascus features a unique Damascus blade made from the steel from the tank destroyed in Bauska. The non-stainless damask mosaic is hand-forged by Chad Nichols and resembles the tank tracks left in the ground by the Tiger's heavy tracks. Unlike conventional damask, damask mosaic production does not create layers, but complex damask bars are hand forged into a mosaic with an elaborate and very complicated process. The blade operates on ball bearings and is locked open by a sturdy steel framelock with stonewash finish.

The overall shape of the knife pays homage to the famous lines of the tank, while the decorative pin screw is modeled on the main drive pinion.

The slightly shaped micarta canvas handle scales feature precisely milled grooves, reminiscent of the characteristic surface texture of the Zimmerit coating of German armored vehicles.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: Damascus steel from pieces of the Tiger
Handle: in steel and micarta
Blade length: 85mm.
Blade thickness: 3.6mm.
Total length: 198mm.
Weight: 141g.
Clip: in stainless steel
Closure: Frame Lock
Packaging: PVC display case that lets the knife "float" inside, making it visible from all sides
Notes: Certificate of Guarantee - Gray cotton case

The Boker Plus Cataclyst Flipjoint features a flipper opening blade, it does not lock when open, but is simply held securely in place by a retaining ball. With appropriate pressure on the back of the blade, the blade can be folded back without releasing a locking device.

The sleek design features a textured black G10 grip that is three-dimensionally milled and has a weight-saving recess inside. Supplied with a deep pocket clip and a drawstring hole.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: 440C steel
Blade treatment: satin finish
Handle: steel and G10
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 173mm.
Weight: 77g.
Clip: monolithic, removable
Closure: slipjoint
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearings

Intended use: Sports / collection

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin
Handle: in G10 Blue / gray
Blade length: 702mm.
Blade thickness: 3mm.
Total length: 170mm.
Weight: 93g.
Clip: in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: pinball opening system on ball bearings - designed by Sam Abdelrahman

In 1947, Mikhail Kalashnikov presented the AK-47 assault rifle he had designed to the Red Army and immediately convinced the decision-making bodies of its development. Only two years later, the now famous AK-47 was officially put into service as the "7.62 mm Awtomat Kalasshnikova obraztsa 1947". Even then, the simple and reliable design with a gas-pressure magazine with a swivel-head breech, the consistent use of stamped plates that could be produced quickly and cheaply, and the adherence to a class of cartridges introduced by the Wehrmacht with the StG 44 with an average performance between machine gun and rifle ammunition set the trend to this day. These characteristics have made the Kalashnikov system the most built and replicated weapon in history, with an estimated 100 million manufactured worldwide.

Introduced in 1959 along with the AKM, the revised variant of the AK-47, the bayonet was no less revolutionary and formative for later designs than the famous assault rifle itself. The concept was based on a knife originally developed by R. Todorov for combat swimmers. It marked a move away from long bayonets, which were used purely as cutting weapons, to a short, mountable knife with insulated shears and a multifunctional rear saw.

Mikhail Kalashnikov personally visited the Boker manufacture in Solingen in 2002 and officially introduced the Boker Kalashnikov knife line to the public. More than 70 years after the AK-47 entered service, we now present a truly exceptional special edition model of the knife line and once again honor its brilliant engineering achievement. The Boker Kalashnikov Bayonet Damascus features a unique Damascus steel blade, made from 6Ch3 and 6Ch4 bayonet steel according to the GRAU index of the former Soviet Army and decorated with General Kalashnikov's signature. The stainless Damascus, handcrafted by Chad Nichols, has 80 layers and is hand forged in the Virus pattern. It features an unusually intricate pattern that is the result of a very controlled forging process.

The handle is CNC machined from a block of 6061-T6 aluminum and then black anodized. The stabilized inlays are made of domestic hornbeam wood, reminiscent of the wood in the stock of the famous assault rifle, and together they form the shape of the characteristic vents on the fore-end. The Russian amber shellac color of the original stocks has been accurately reproduced. They are also CNC milled from solid and inserted by hand. All screws and clip are also black anodized. Made in the Boker knife factory in Solingen, it is delivered with transparent floating display, certificate of authenticity and individual serial number.

Intended Use: Collection

Type of production: Semi - Industrial
Country of Production: Germany - Solingen
Blade: 80 ply stainless damask steel, handcrafted by Chad Nichols, from former Soviet Army 6Ch3 and 6Ch4 bayonets
Handle: aluminum 6061-T6 and hornbeam wood
Blade length: 96mm.
Blade thickness: 3.8mm.
Total length: 228mm.
Weight: 158g.
Clip: removable, PVD stainless steel.
Closure: Liner Lock
Package: PVC expositive case that let the knife "float" inside, making it visible from every side
Notes: Certificate of Guarantee - Grey cotton case - Numbered piece on the blade

Intended Use: EDC/Gentleman

Production type: Industrial
Country of Production: Germany - Solingen
Blade: Stainless steel M390 61HRC
Blade treatment: stonewashed
Handle: micarta
Blade length: 78mm.
Blade thickness: 3.0mm.
Total lenght: 185mm.
Weight: 71g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: - 
Package: Cardboard box with Boker logos
Notes: Design by Raphaël Durand

The stunning Boker M4 Sherman-Damascus is a living piece of history and combines high quality craftsmanship with historical materials. The American M4 Sherman was designed in 1940 and is considered to be one of the most famous tanks in history. It was produced between 1942 and 1945, remained in service until 1957 and was used on all battlefields of World War II - not only by the United States and Canada, but also by Britain, by French forces. , from China and even the Soviet Union.

The Boker Sherman-Damascus features a unique 80-ply Damascus blade, forged with materials sourced from the production of the M4 Sherman tanks, previously restored by the museum. The unique damask is hand-forged for Boker by Chad Nichols and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman. The ball bearing blade fits into a solid steel frame block.

The overall shape of the knife is a tribute to the aesthetic lines of the tank, while the decorative screw of the blade axis is modeled on the characteristic main transmission pinion. The slightly contoured canvas micarta handle fits comfortably in the hand and the color is reminiscent of the camouflage paint used by both the United States Army and Marine Corps.

Sold with transparent display and with certificates of authenticity and individual serial number.

A portion of the proceeds from each knife sold goes to the Americans at the Wartime Museum to support educational programs and the care and preservation of these proud examples of American history. The Americans in the Wartime Museum is a nonprofit cultural and educational institution dedicated to honoring those who have served in all branches of the U.S. military and on the home front from World War I to the present.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: 80-layer stainless steel damascus, from parts of the M4 Sherman
Handle: in steel and micarta
Blade length: 77mm.
Blade thickness: 3.5mm.
Total length: 175mm.
Weight: 107g.
Clip: in stainless steel
Closure: Frame Lock
Packaging: PVC display case that lets the knife "float" inside, making it visible from all sides
Notes: Warranty Certificate - Gray cotton case - Numbered copy on the handle

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Satin
Handle: Micarta and Steel
Blade length: 85mm.
Blade thickness: 3.9mm.
Closed length: 117mm.
Total length: 202mm.
Weight: 153g.
Clip: in stainless steel, with yellow anodization
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Notes: Design by Jesper Voxnaes

Intended Use: EDC / Sporting

Production Type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: Titanium
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 173mm.
Weight: 77g.
Clip: monolithic, titanium, removable
Closure: FrameLock with removable stainless steel clapper
Package: nylon pouch with zipper - cardboard box with Boker Plus logos
Notes: opening through Carson Flipper system on ball bearings

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: in carbon steel D2
Blade treatment: satin finish
Handle: G10
Blade length: 81mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 140g.
Clip: -
Closure: back lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Sam Lurquin