Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Poliwog Knife C98F - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: in good condition
Available in stores: NO
Sharpening: Resharpened by our internal laboratory
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES
Checked and Certified by our internal laboratory
A pollywog represents metamorphosis in the animal kingdom, adapting and changing its form to survive in its environment. The same principle applies here. The Spyderco Poliwog CLIPIT® thrives in a small-knife-friendly environment while keeping the features necessary to excel in a harsh, heavy cutting and performance setting. Its distinctive opened-ended Ball Bearing Lock™ exposes the knife's inner workings for easy cleaning and rates as one of Spyderco's highest strength locking mechanisms. Pulling back on the ball unlocks the blade ambidextrously from either side of the knife.The hand settles on the curved handle positioning the index finger into a choil that optimizes control and generates less fatigue and pressure on the hand during cutting. Made from VG-10, the blade has a hollow-ground edge with a weight reducing swedge-grind extending mid-spine to the tip. It is available in PlainEdge. Its ambidextrous wire-tension pocket clip sets the Poliwog tip-up in the pocket.
Intended use: Sporting / EDC
Type of production: Industrial
Blade Production: Japan
Blade: in VG10 stainless steel
Blade Treatment: -
Handle: in steel
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 145mm.
Thickness when closed: -
Balance: -
Weight: 116g.
Closure: Ball Bearing Lock™
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -AP-C98F -
Spyderco - Cricket Knife - C29BK - ATS-55 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available Discontinued since 2003
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, some signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: Yes
* Checked and certified by our internal laboratoryIntended use: Sporting
Type of production: industrial
Blade: ATS-55 stainless steel
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 50mm.
Blade thickness: 1.9mm.
Length closed: 70mm.
Total length: 118mm.
Weight: 36g.
Closure: Liner Lock
Clip: Removable, stainless steel
Notes: Version remained in production from approximately 1997 to 2003 - example withdrawn from a private collection, overall in very good condition.AP-C29BK -
Spyderco - 1997 Calypso Jr. Experiment PLN Micarta - C52BMP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2000
* Sharpening: Factory.
* Marks on blade: Small marks due to blade opening.
* Marks on handle: Small marks on metal pins.
* Box: Yes, original
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDC / Collection
Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8
Blade Finish: Satin finish
Handle: G-10 with stainless steel liners
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 170mm.
Weight: 65g.
Closure: Back Lock
Clip: painted stainless steel, removable
Packaging: white cardboard box, no logos, with serial number, production code and Spyderco bar code
Notes: Knife produced in June 1997 - remained in production only from 1997 to 2000, experimental version of the Calypso Jr. model.C52BMP-CP -
Spyderco - Military - Natural G-10 & CPM-M4 Black DLC - Exclusive Edition - C36GM4BK - Knife
Intended Use: Collection / Tactical
Production Type: Industrial
Country of Production: USA
Blade: Carbon steel CPM-M4
Blade Finish: Black DLC
Handle: Natural G-10
Blade Length: 102mm.
Blade thickness: 3.3mm.
Length closed 140mm.
Total lenght: 241mm.
Thickness when closed: 15mm.
Weight: 122g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: limited edition made in February 2019 exclusively for a US retailer - discontinued, sold out and unobtainable - Direct link to manufacturer's datasheet: https://www.spyderco.com/catalog/details/C36GM4BK/1210C36GM4BK -
Rick Hinderer Knives - XM-24 - Spearpoint 4.0" - Bronze Ti Custom Set - Coltello
Intended use: Tactical / Collection
Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN 61 / 62HRC stainless steel
Blade treatment: stonewashed
Handle: titanium and G10
Blade length: 101mm.
Blade thickness: 4.6mm.
Closed Length: 138mm.
Total length: 234mm.
Weight: 220g.
Closure: FrameLock
Clip: titanium, removable
Notes: custom version with screws and accessories in anodized bronze titanium
Additions compared to the standard model:
* Pivot screw in bronzed titanium
* 3 front screws in bronzed titanium
* 3 spacers in bronzed titanium
* Rear stabilizer lockbar in bronzed titanium
* Clip in bronzed titanium
* Clip cover in bronzed titaniumXM24TIB -
Spyderco - Native 5 - Maxamet Sprint Run - C41PGY5 - knife
Intended Use: Sport / Collection
Type of production: Industrial
Country of production: USA
Blade: CTS Maxamet Tool Steel 67/68HRC
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Weight: 70g.
Locking System: Back Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: limited edition sprint runC41PGY5 -
Hinderer Knives - XM-24 - Custom Grind Slicer - Carbon Fiber with Anodized Titanium - custom knife
Intended use: Tactical / Collection
Type of production: custom
Country of Origin: USA
Blade: handcrafted by Rick Hinderer, CPM-S35VN 61 / 62HRC stainless steel, with double concave beveling
Blade treatment: Hand satin
Handle: grip plate in the liner thickness of titanium 1mm 6AL4V 3.5mm carbon fiber with blue anodizing. Frame titanium blue anodized 6AL4V, billet, thick 4.5mm with Hinderer Lockbar Stabilizer. Spacers and screws 17-4 PH stainless steel
Blade length: 100mm.
Blade thickness: 4.5mm.
Closed Length: 135mm.
Overall length: 233mm.
Thick when closed: 15mm.
Weight: 210g.
Lock: Frame Lock type
Clip: blue anodized titanium
Notes: Lanyard black paracord with titanium wire stop 6AL4V blue anodized, billet, with a diameter of 9mm, custom by Rick Hinderer12479 -
Spyderco - Endura 4 Knife - Titanium and Damascus - C10TIPD - knife
Intended Use: Collection
Type of production: industrial
Blade: D.P.S.15 rolled stainless steel damascus with VG-10 58HRC cutting edge
Country of manufacture: Japan
Handle: brushed titanium
Blade length: 97mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 222mm.
Weight: 119g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: leatherette zippered pouch with Spyderco logos
Notes: the blade is made of a special 31-layer steel produced by Takefu Special Steel Company Ltd.C10TIPD