Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Herold Solingen - Stropping paste - Medium Grain - stropping
Paste for high quality strop, which is essential for the maintenance of freehand razors. It can also be used for knives and gouges.
Grain: medium.
Ingredients: vegetable oils and fats, dye, abrasive elements.
Content: 5 ml.
11107€5.74Only 6 left -
Herold Solingen - Stropping paste - Fine Grain - stropping
Pasta for high quality strop, which is essential for the maintenance of freehand razors. It can also be used for knives and gouges.
Grain: fine.
Ingredients: vegetable oils and fats, dye, abrasive elements.
Content: 5 ml.
11106€5.33Only 5 left -
Herold Solingen - 195-J - Leather Strop - Straight Razor
The Herold Solingen 195-J is a leather strop for sharpening straight razors, ideal for professional barbers and traditional shaving enthusiasts. This tool is made with high-quality materials, including Russian buffalo leather, which guarantees precise and delicate sharpening of the razor. The strop has a long and smooth surface that allows the blade to be sharpened evenly without damaging or scratching it. Thanks to its ergonomic design and easy handling, the Herold Solingen 195-J is perfect for daily use and for keeping your straight razor always sharp.
Handle: Synthetic Leather
Strop: First-Class Leather
Strop Length: 38.5cm
Total Length: 57cm
HS-183J€63.93Only 2 left -
Herold Solingen - Strop Leather Double Grane - stropping kit
High quality strop for maintenance of razors, knives and gouges.
On the side is the Classic Leather (20 x 4 cm, thickness 2.5 mm) and on the darker a bit more raw leather (20 x 4 cm, thickness 2.5 mm) to use when using the classic one is no longer enough .
The strop is not adjustable, but thanks to the spaces inside the wooden structure and the red felt inserts are ensured flexibility ..
Dimensions (including handle) 31.5 x 3 x 4 cm, 120 gr weight.
11102€42.62Only 0 leftOut of stock -
Herold Solingen - Strop Leather and Stone - strop
High quality strop for maintenance of razors, knives and gouges.
On one side there is covered by Russian Leather (20 x 4 cm, thickness 3 mm) and on the other there's a natural stone fine grain (20 x 4 cm, 5 mm thick).
The strop is not adjustable, but the spaces inside the wooden structure allow a slight decline of the leather side.
Dimensions (including handle) 31.5 x 2 x 4 cm, weight 208 grams.
11101€50.82Out of stock -
Herold - Strop Belt
Strop belt Extra Large, to straight razor, the German Dovo. Historical company of Solingen, specialized in the manufacture of cutting tools of high and very high quality.
Handle: leather
Strop: high-grade leather (leather back)
Strop Length: 39cm useful (7,8cm height - 3 mm thick)
Overall Length: 57.5 cm (hooks included)coramella-cinghia€54.92Only 0 leftOut of stock -
Strider Knives - AR Tiger Stripe Coyote Tan - knife
Intended Use: Tactical
Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle: with G10 scales with titanium liners 2mm
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thick when closed: 18mm.
Balance: -
Weight: 244g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: Hardened by Paul Bos, with logo on the right heel of the blade10916 -
Strider Knives - DB - CPM 3V .190 Stock Frag Edition, fodero PUP e guancette nere di ricambio
Destinazione d'uso: Tattico
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: CPM-3V Tool Steel
Trattamento Lama: Nitrurazione al titanio
Manicatura: G-10 con lavorazione 3D in colore Green + una coppia di guancette intercambiabili in G-10 in colore Black
Lunghezza lama: 80mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 184mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 227g.
Chiusura: -
Clip: -
Fodero: in Kydex, dotato di sistema opzionale e multiposizione PUP (Pals Universal Platform)
Confezione: Busta Trasparente
Note: Edizione Esclusiva e Limitata, non presente nei normali listini e cataloghi Strider, con loghi Monkey Edge incisi10835 -
Strider Knives - AR Tiger Stripe Coyote Tan - knife
Intended Use: Tactical
Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle: with G10 scales with titanium liners 2mm
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thick when closed: 18mm.
Balance: -
Weight: 244g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: Hardened by Paul Bos, with logo on the right heel of the blade10139 -
Beltrame - Tinea Kombat knife - coltello
***************************************
FUORI PRODUZIONE
NOTA INFORMATIVA: questo prodotto è presente nel nostro database unicamente a scopo storico ed informativo, non ci risulta più in produzione e pertanto non è acquistabile. Per aggiornamenti: [email protected]
***************************************
Questo kombat è stato disegnato da Ivano Beltrame e realizzato insieme al maestro Danilo Rossi, fondatore della Calix Academy Europe Club, accademia il cui scopo è la divulgazione delle tradizioni italiane nel maneggio di armi bianche e bastoni.
Dalla Paranza siciliana, alla Puntatina, al sistema Zaccagno, alla Pizzica pugliese, alla Beidana valdese, al Falcet piemontese alla Britula friulana.
Dettaglio delle scelte tecniche:
l’impugnatura con l’elsa a proteggere la mano serve a far scivolare durante il combattimento la lama all’avversario, e ci siamo ispirati sempre per restare in ambito tradizionale alla coccia del fioretto italiano.
Il foro sulla lama serve a bloccare la lama dell’avversario e a disarmarlo non con una azione di forza ma di destrezza.Lo skull krash minimalista non serve tanto a rompere quanto a strisciare sull’avversario per disarmarlo o per far leva sui tendini sempre per una azione di disarmo.
Il nome Tinea si ispira al un famoso combattente italiano Ottaviano detto er più de Roma reso celebre dal film di Adriano Celentano “ Storie di donne e di coltelli”.La scelta dei materiali il pratico acciaio N690 e lo spessore 6mm ne garantiscono la robustezza in ogni situazione; è stato testato in prove estreme di foratura e taglio senza perdere efficienza.
Il manico in G10 oltre a garantire un ottimo grip e anche efficace conduttore in caso di scossa elettrica.
Al momento è disponibile con copertura teflon in grado di evitare sia in diurna che in notturna quelle situazioni di rifrangenza durante l'utilizzo.
Il fodero è stato studiato sia per attacco in cintura ma soprattutto da posizionare con un pettorale proprio in copertura ¾ del cuore con uno sgancio rapido per situazioni critiche, difficilmente i foderi posti in altre zone garantiscono una immediatezza di copertura in caso di attacco.
Destinazione d'uso: Militare/Tattico/Collezione
Tipo di produzione: industriale
Lama: 58-59HRC N690
Trattamento Lama: teflonata
Produzione Lama: Italia
Manicatura: G10
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza totale: 295mm.
Bilanciatura: sul ramo di guardia
Peso: 370g.
fodero: in cordura con attacco ascellare
Note: Design by Danilo Rossi7224€204.09Out of stock -
Strider Knives - BN SS Ranger Tanto coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: tattico/militare
Tipo di produzione: Semi-Artigianale
Lama: full tang in acciaio inox CPM-S30V
Produzione Lama USA
Manicatura: Paracord
Lunghezza lama: 179mm.
Spessore della lama: 6,3mm.
Lunghezza totale: 334mm.
Bilanciatura: sul ramo di guardia
Peso: 444g.
Fodero: tattico in Cordura
Note:7807 -
Strider Knives - BT Fixed Blade Tanto Black G10 coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10
Lunghezza lama: 155mm.
Spessore lama: 6.3mm.
Lunghezza totale: 296mm.
Peso: 380g.
Fodero: in Cordura
Confezione: -
Note: -7806B -
Strider Knives - BT Fixed Blade Tanto Coyote Paracord
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: Paracord
Lunghezza lama: 155mm.
Spessore lama: 6.3mm.
Lunghezza totale: 296mm.
Peso: 348g.
Fodero: in Cordura
Confezione: -
Note: -7806 -
Strider Knives - DB-L Tiger Stripe Black G10 - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10
Lunghezza lama: 100mm.
Spessore lama: 6.3mm.
Lunghezza chiuso: -
Lunghezza totale: 210mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 230g.
Chiusura: -
Clip: -
Fodero: in Kydex
Confezione: -
Note: -7825 -
Strider Knives - FS Tactical Knife Gunner Grip coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: tattico/militare
Tipo di produzione: Semi-Artigianale
Lama: full tang in acciaio inox CPM-S30V
Produzione Lama USA
Manicatura: G10
Lunghezza lama: 138mm.
Spessore della lama: 6,3mm.
Lunghezza totale: 257mm.
Bilanciatura: sul ramo di guardia
Peso: 362g.
Fodero: tattico in kydex
Note:7804 -
Strider Knives - HS Tarani Karambit - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10
Lunghezza lama: 80mm.
Spessore lama: 4.7mm.
Lunghezza totale: 198mm.
Peso: 145g.
Fodero: in Kydex
Confezione: -
Note: -7811 -
Strider Knives - MK-1 Mod.10 OAL Tiger Stripe Black G10 - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10
Lunghezza lama: 140mm.
Spessore lama: 6.3mm.
Lunghezza chiuso: -
Lunghezza totale: 265mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 330g.
Chiusura: -
Clip: -
Fodero: in Cordura
Confezione: -
Note: -7826 -
Strider Knives - MT Mod.10 Chuck Mawhinney Sniper Green Paracord - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: tattico/militare
Tipo di produzione: Semi-Artigianale
Lama: full tang in acciaio inox CPM-S30V
Produzione Lama USA
Manicatura: Paracord
Lunghezza lama: 138mm.
Spessore della lama: 6,3mm.
Lunghezza totale: 258mm.
Bilanciatura: sul ramo di guardia
Peso: 282g.
Fodero: tattico in Cordura
Note: modello dedicato a Charles Benjamin "Chuck" Mawhinney, famoso sniper dei Marines ai tempi della guerra in Vietnam.7801 -
Strider Knives - MT Tactical Fixed Blade Black G10 - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10
Lunghezza lama: 157mm.
Spessore lama: 6.3mm.
Lunghezza totale: 296mm.
Peso: 364g.
Fodero: Nero, in Cordura
Confezione: -
Note: -7809 -
Strider Knives - MT Tactical Fixed Blade Green G10 - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10
Lunghezza lama: 157mm.
Spessore lama: 6.3mm.
Lunghezza totale: 296mm.
Peso: 364g.
Fodero: Verde, in Cordura
Confezione: -
Note: -7809G -
Strider Knives - MT Tactical Fixed Serrated Blade Green G10 - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10
Lunghezza lama: 157mm.
Spessore lama: 6.3mm.
Lunghezza totale: 296mm.
Peso: 364g.
Fodero: Verde, in Cordura
Confezione: -
Note: -7809SG -
Strider Knives - PR Tiger Stripe Coyote Paracord - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: Paracord
Lunghezza lama: 90mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 195mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 148g.
Chiusura: -
Clip: -
Fodero: in Kydex
Confezione: -
Note: -7824D -
Strider Knives - PR Tiger Stripe Green Paracord - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: Paracord
Lunghezza lama: 90mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 195mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 148g.
Chiusura: -
Clip: -
Fodero: in Kydex
Confezione: -
Note: -7824G -
Strider Knives - PS Small Karambit
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10
Lunghezza lama: 93mm.
Spessore lama: 4.7mm.
Lunghezza totale: 178mm.
Peso: 152g.
Fodero: in Kydex
Confezione: -
Note: -7810 -
Strider Knives - RS Skinner - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: tattico/caccia
Tipo di produzione: Semi-Artigianale
Lama: full tang in acciaio inox CPM-S30V
Produzione Lama USA
Manicatura: G10
Lunghezza lama: 106mm.
Spessore della lama: 6,3mm.
Lunghezza totale: 216mm.
Bilanciatura: sul ramo di guardia
Peso: 252g.
Fodero: tattico in kydex
Note:7805 -
Strider Knives - RS Tiger Stripe Skinner - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: tattico/caccia
Tipo di produzione: Semi-Artigianale
Lama: full tang in acciaio inox CPM-S30V
Produzione Lama USA
Manicatura: G10
Lunghezza lama: 106mm.
Spessore della lama: 6,3mm.
Lunghezza totale: 216mm.
Bilanciatura: sul ramo di guardia
Peso: 252g.
Fodero: tattico in kydex
Note:7805T -
Strider Knives - SMF CC S Tiger Stripe - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianali
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Stone Washed
Manicatura: G-10 e Titanio
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza totale: 228mm.
Peso: 154g.
Chiusura: Frame Lock in titanio
Clip: in titanio
Fodero: -
Confezione: -
Note: -7821T -
Strider Knives - SMF S Special Mission Black G10 - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianali
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10 e Titanio
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza totale: 228mm.
Peso: 172g.
Chiusura: Frame Lock in titanio
Clip: in titanio
Fodero: -
Confezione: -
Note: -7820 -
Strider Knives - SMF S Special Mission Green G10 - coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianali
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: G-10 e Titanio
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza totale: 228mm.
Peso: 172g.
Chiusura: Frame Lock in titanio
Clip: in titanio
Fodero: -
Confezione: -
Note: -7820G -
Strider Knives - SNG-T Tiger Stripe Black G10 - knife
Intended Use: Tactical
Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle material: G10 and titanium
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 203mm.
Thick when closed: 12mm.
Balance: -
Weight: 138g.
Closure: Frame Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: -7822 -
Strider Knives - WB Fixed Blade Tanto Green Paracord - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: Paracord
Lunghezza lama: 133mm.
Spessore lama: 6.3mm.
Lunghezza totale: 259mm.
Peso: 286g.
Fodero: Verde, in Cordura
Confezione: -
Note: -7808 -
Strider Knives - WB Fixed Blade Tanto Coyote Paracord coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici made in USA Strider Knives
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S30V
Trattamento Lama: Tiger Stripe
Manicatura: Paracord
Lunghezza lama: 133mm.
Spessore lama: 6.3mm.
Lunghezza totale: 259mm.
Peso: 286g.
Fodero: Coyote, in Cordura
Confezione: -
Note: -7808D