Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Conaz Consigli Scarperia - Zuava knife 16 cm raw ox horn 50307 - knife
Intended use: sporting/collection
Type of production: artisan
Blade production: Italy
Blade: Stainless steel X50CrMoV15
Blade treatment: -
Handle: Raw ox horn
Blade length: 70mm.
Blade thickness: 1,6mm.
Length closed: 90mm.
Total length: 160mm.
Weight: 53g.
Closure: without blade lock
Packaging: cardboard box
Sheath: -Craftsmanship is beautiful because it is varied
The colours of the materials from which the handicrafts are made may vary from those shown in the pictures.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: that's the beauty of fine materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: that's the beauty of fine workmanship. Combine all this and you have a product that is always different and unique. And always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.
50307 -
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife
This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.
Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs
Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm50075 -
Lame d'autore - N° 70 - 04/2016 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)In questo numero troverete:
PROFILI: Celso Fiocchi, Pasquale De Bartolomeo
TECNICA: Cucire il fodero
REPORTAGE: Il Cic attraverso le foto di Francesco Pachì, Shot show
TEST: Blackfox Bf-705b Sai, Fällkniven Pc, Prezioso Ferus desert, Spyderco Dogtag folder C188
PROFILO AZIENDA: Kunzi compie 80 anni
STORIA: Pugnali-coltelli da assaltatore, 1915-16; La rinascita della LeppaLame70 -
Lame d'autore - N° 68 - November 2015 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)In questo numero troverete:
TECNICA: Costruiamo il fodero; Il restauro dei rasoi
REPORTAGE: Achi show, Coltello in festa; Feria de Albacete; Ficx 2015
STORIA: Pugnale da assaltatore 1960; Victorinox in orbita
TEST: Azero 211012; Fkmd Wilson combat Fx.307Cb Rapid response; Outdoor edge Brush demon; North arm knives Osprey; Spyderco Lil' LionSpy C181Gti; Wallet Ninja.lame68 -
Consigli Scarperia - Maremmano Amaranth wood - Kilama Serie MFMA18 - knife
The series Kilama by Consigli is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
Total length: 185
Blade length: 80
Blade thickness: 2.5
Weight. 55g
Steel: 420
Hanfle: amaranth wood
Sheath: -
Package: box with cleaning kit50154 -
Lame d'autore - N° 67 - July 2015 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)In questo numero troverete:
- Speciale visita a Pattada
- Reportage IWA
- Storia: Pugnale 1936 Opera balilla
- Test:
* Azero 151233
* Black Fox Trackmaster
* Camillus Les Stroud
* Spyderco Brad Southard
lame67 -
Lame d'autore - N° 65 - January 2015 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)Un grande fascicolo questo n°65 del trimestrale Lame d'autore. Ci sono reportage dal salone della Corporazione italiana coltellinai di Milano e quello di Culter expo, a Novegro (Mi).
Poi un excursus sui coltelli survival di Maurizio Ceracchi e il profilo del coltellinaio piemontese Luciano Ferraudo.
Per la storia, siamo andati a studiare il pugnale per assaltatori del Rei modello 1939 e il Victorinox Soldier.
La sezione della tecnica si occupa della temprabilità e struttura degli acciai.
Imperdibile il glossario dedicato alla lettera C con oltre 50 voci.
Questi i test: Atk Aquitania, Browning Non-typical stag, Crkt Drifter large, Extrema Ratio Resolza, Mitchell Tarlo, Muela 21733-G, Spyderco Domino pin
lame65 -
Conaz Consigli Scarperia - Fiorentino Bovino knife cm 24 - 50018 - knife
Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 148g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.R-FIC24 -
Consigli Scarperia - Calabrese in bovine R-CAC20 - knife
A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip50004 -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 17cm - 53161 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 34g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53161 -
Conaz Consigli Scarperia - Pattada Brotzu raw mutton 22cm PBM22G - knife
Pattada Brotzu raw mutton 22cm PBM22G - knife
Typical folding knife craftsmanship Sardinian manufactured by Conaz ScarperiaBlade: stainless steel 420
Handle: raw mutton
Blade length: 90mm.
Overall length: 215mm.
Weight: 64g.WARNING: these are natural material, the color of the horn may be different from the one in the picture.
PBM22G -
Lame d'autore - N° 62 - April 2014 - magazine
Color Magazine , Quarterly , produced and distributed in Italy since 1998.
Specializing in knives of all types ( collection , craft , military, sports and multi-purpose)
80 Pages
A number this explosive 62 which inaugurates the 15th year of the magazine Lame author , the first and most important part of the landscape .
Victorinox , however, it turns 130 years old : we went to visit the factory where they produce 120 thousand knives a day. Reporting from the guild hall Italian knife , custom knives with the most interesting of the moment and pictures of Francesco Pachì and shot by American show in Las Vegas. The profile is dedicated to Michael " Cormoran " Sferragatta .
The magazine continues with the technique of sharpening of the razor with the use of very traditional strop ...
These tests : 110 Buck Hunter anniversary , Condor Kukri machete , P3G Fallkniven , Fox knives - Golok Hitam , Great eastern cutlery lockable Maserin GTO , Viper Carnera , Woodlore 25th anniversary .
Of course, much more to be the best survival knife and knives created by readers of the Facebook group .lame63 -
Lame d'autore - N° 62 - April 2014 - magazine
Color Magazine , Quarterly , produced and distributed in Italy since 1998.
Specializing in knives of all types ( collection , craft , military, sports and multi-purpose)
80 Pages
A number this explosive 62 which inaugurates the 15th year of the magazine Lame author , the first and most important part of the landscape .
Victorinox , however, it turns 130 years old : we went to visit the factory where they produce 120 thousand knives a day. Reporting from the guild hall Italian knife , custom knives with the most interesting of the moment and pictures of Francesco Pachì and shot by American show in Las Vegas. The profile is dedicated to Michael " Cormoran " Sferragatta .
The magazine continues with the technique of sharpening of the razor with the use of very traditional strop ...
These tests : 110 Buck Hunter anniversary , Condor Kukri machete , P3G Fallkniven , Fox knives - Golok Hitam , Great eastern cutlery lockable Maserin GTO , Viper Carnera , Woodlore 25th anniversary .
Of course, much more to be the best survival knife and knives created by readers of the Facebook group .LAME62 -
Conaz Consigli Scarperia - Buffalo horn screed - Kilama 50159 series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Weight: 63g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case50159 -
Consigli Scarperia - Maremma in Olivo - Series Kilama MFO18 - knife
Maremma in Olivo - Series Kilama MFO18 - knife
The series Kilama Councils is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
that reflect the traditional and regional Italian classics knives.
Total length: 185
Blade length: 80
blade thickness: 2.5
weight. 55g
Steel: 420
manicatura: amaranth wood
Sheath: fabric
Package: Box Advice with cleaning kit knife50157 -
Conaz Consigli Scarperia - Hunchback knife in Olive - Kilama 50153 Series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisanLama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 185mm.
Weight: 50g.
Closing: retention spring
Packaging: Tips box with knife cleaning kit
Sheath: fabric caseGAO18 -
Conaz Consigli Scarperia - Senese knife in amaranth - Kilama series SEAM18 - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: amaranth wood
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 185mm.
Weight: 55g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
SEAM18 -
Conaz Consigli Scarperia - Zuava knife 19 cm raw ox horn 50309 - knife
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ox horn
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 190mm.
Weight: 79g.
Closing: without blade lock
Packaging: cardboard box
Sheath: -
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50309 -
Conaz Consigli Scarperia - Mugello 16 cm horn cattle raw E-CMC16G - knife
Mugello 16 cm horn cattle raw E-CMC16G - knife
Blade: 420 stainless steel
Handle: raw beef
Blade length: 75mm.
Overall length: 165mm.
Weight: 39g.
Closed Length: 90mm.
CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.50306 -
Conaz Consigli Scarperia - Ghiandina 16 cm horn cattle raw E-GHC16G - knife
Ghiandina 16 cm horn cattle raw E-GHC16G - knife
Blade: 420 stainless steel
Handle: raw beef
Blade length: 70mm.
Overall length: 160mm.
Weight: 36g.
Closed Length: 90mm.
CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.50308 -
Lame d'autore - Numero 61 - Dicembre - Anno 2013 - rivista
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)
80 Pagine
Storia: Coltelli ed ex voto
Tecnica: Teoria dei trattamenti termici degli acciai
Reportage: Culter Expo 2013
Legge: Perché la cassazione ci è ostile?
Profilo: Marcello Garau
Test coltelli: Brusletto Villmann, Condor Koukri, Extrema Ratio Dicok, Fkmd Exagon range, Morris Knives Friction folder, Stuart Mitchell knives Secare, Spyderco Brad Southard Pin, Viper Mathusalemlame61 -
EnZo - Birk 75 Knife - Flat Plain CPMS30V - Black G10 - 2602 - knife
Intended Use: Hunting/Sporting
Production type: Industrial
Country of Production: Finland
Blade: stainless steel CPM-S30V
Blade finish: satin finish
Handle: G10 Black
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 178mm.
Thickness when closed: 7mm.
Weight: 100g.
Closure: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with Enzo Knives logos
Notes: -EN-2602 -
Lame d'autore - Numero 60 - Ottobre - Anno 2013 - rivista
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)
80 Pagine
STORIA
Coltellate risorgimentali nello Stato Pontificio
TECNICA
I rasoi con lame sinterizzate
REPORTAGE
Maniago campione d'Europa
PROFILO
Giuseppe Galante
TEST
Brustello Trillemarka
Camillus Les Stroud Sk Arctic
Crkt Ken Onion Foresight
Fantoni Contrast utility tactical
Fox Zero
Gerber Bear Grylls Ultimate pro fixed blade
Lion Steel TiSpine
Victorinox Hunter pro
Viper Rhinolame60 -
Lame d'autore - Numero 59 - Maggio - Anno 2013 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine STORIA Gli accoltellatori "tirannicidi" TECNICA Il maglio di Scordia Forgiatura e tempra di Yoshindo Yoshihara L'affilatura “serrated” REPORTAGE Shot Show Iwa Exa TEST Condor Nessmuk Crkt Eraser 8900K Cudeman 123M Cesar Bozal Extrema Ratio Rao Avio Fox Parang Nilte Quiete Viper Freelame59 -
Lame d'autore - Numero 58 - Febbraio - Anno 2013 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine PROFILI Pekka Tuominen Marco Selis STORIA Coltelli Toscani TEST Fallkniven GP Fox Tracker Meskwaki Morris Friction Folder Kallioniemi Puukko Maserin Atti Mtech Mini Rockstead Higo-J Spyderco Pingo Viper David e Golia FAI DA TE Picchetto e tensionatore d'emergenza REPORTAGE Cic Show e Culter Expolame58 -
Conaz Consigli Scarperia - Anconetano ox horn 20 cm - 50001 - knife
Traditional knife produced by master cutlers in Scarperia, a place where, since 1300, the artisan manufacture of Italian knives has continued.
Fisherman's knife, typical of the Adriatic sea belt. With external spring, handle in full polished bovine horn, on the end of the back it has a deep step at right angle useful for branching nets.
Intended use: CollectionType of production: artisanal
Blade: X50CrMoV15 stainless steel
Production Lama: Italy
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 200mm.
Weight: 58g.
Closing:
Notes: handcrafted in the city of Scarperia (FI)The colors of the materials with which our handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you. A slight surprise is therefore always accompanied by every online purchase of our handcrafted products: but this is also the beauty of craftsmanship.
50001 -
Conaz Consigli Scarperia - Arbus knife - Arburese Bovine Blonde Horn 20cm - 53021 - knife
Characteristic Sardinian knife, typical of the Arbus area, blade with a characteristic bellied shape, very suitable for leather.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 15mm.
Total length: 205mm.
Weight: 73g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53017B -
Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife
Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50002 -
Conaz Consigli Scarperia - Mozzetta light ox horn 50034 - knife
This knife owes its name to the blunt tip which is absolutely missing as if the blade had been cut off.
Pointless knives became much more widespread with the "Giolitti law" of 1908 which fixed the length of the blade of pointed knives at only four centimeters.
For mozzette, the limit rose to ten centimeters, offering the possibility of safely carrying a knife of sufficient size in your pocket without risking the rigors of the law.Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 185mm.
Weight: 63g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseThe craftsmanship is beautiful because it is varied
The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.50034 -
Conaz Consigli Scarperia - Pattada Brotzu knife bovine horn 22cm - 53142 - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by the Scarperia Consigli company.
The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition.
Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 120mm.
Total length: 215mm.
Weight: 62g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53142 -
Conaz Consigli Scarperia - Pattada Brotzu knife ox horn - 53143 - 24cm - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 76g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53143 -
Consigli Scarperia - Romano con anello 30cm - ox horn - 50060 - knife
The "Roman" testifies to the widespread mentality in the Papal States for which the knife was considered as a faithful friend to be constantly worn "in his pocket" and to be unleashed at the first hint of a fight or for an immediate response.
Many elements constituting the "Roman" bear witness to the offensive use that distinguished this knife: the sharp blade, the decorations of the lattice handle or fish bone that served to improve the grip, the locking system with fixed spring that prevented the knife could close up accidentally and that at the time of the opening emitted a dry noise that exalted the aggressive expression.
Destination of use: collection
Type of production: artisan
Blade: 420 stainless steel
Country of production: Italy
Grip: engraved ox horn
Blade length: 130mm.
Blade thickness: 2.5mm.
Length closed: 160mm.
Total length: 290mm.
Weight: 106g.
Closure: rear ring lock
Notes: made entirely by hand in the city of Scarperia (FI)Weight: 140g.
50060 -
Consigli Scarperia - Three Pianelle R-TPC20 - knife
Three Pianelle R-TPC20 - knife
Craft knife regional product in Scarborough in use in southern Italy
The handle in a single block of polished cow horn, carries on pin the characteristic round escutcheon in brass.Blade: Stainless ino 440
Blade length: 8.5 cm
Overall length 20 cm
Weight: 38 gr.
Handle: horn cattle50071 -
Lame d'autore - Numero 1 - Anno 2003 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). Ottima qualità grafica, contenuti discretamente documentati, precisi e aggiornati. Alta qualità illustrativa - Pag 80L2003-1 -
Lame d'autore - Numero 2 - Anno 2003 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). Ottima qualità grafica, contenuti discretamente documentati, precisi e aggiornati. Alta qualità illustrativa - Pag 80L2003-2 -
Lame d'autore - Numero 24 - Ottobre/Novembre/Dicembre 2004 - rivista
Lame d'autore - Numero 24 - Ottobre/Novembre/Dicembre 2004
TEST:
* Conaz - Gobbi
* Surefire - Alpha e Bravo
* Multi Tool Militari
* Fox - Sheridan - vedi la scheda prodotto
* Viper - Serie Caccia - vedi la scheda prodotto
PERSONAGGI:
* Mick Penfold
* Angelo Scotti
ED INOLTRE:
* Lame orientali Citadel
* Le Roncole
* Come nasce un grande coltelloL2004-24 -
Lame d'autore - Numero 25 - Gennaio/Febbraio/Marzo 2005 - rivista
TEST:
* Boker - Voros Neck Knife
* Thiers Issard Sabatier - Regionali francesi
* Fallkniven - TK3 - vedi la scheda prodotto
* Fox - Karambit - vedi la scheda prodotto
PERSONAGGI:
* Rick Bowles
* Ettore Gianferrari
* Fabrizio "Silvester" Silvestrelli
ED INOLTRE:
* I Maestri del Knife Fighting
* Culter Expo
* Show di MilanoL2005-25 -
Lame d'autore - Numero 4 - Anno 2003 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). Ottima qualità grafica, contenuti discretamente documentati, precisi e aggiornati. Alta qualità illustrativa - Pag 80L2003-4 -
Lame d'autore - Numero 42 - Dicembre Anno 2008 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
INDICE:
* Mostre Show: Arresojas 2008
* Mostre Show: Novegro Culter Expo 2008
* Test: Maserin 995 Aikuchi Ballestra
* Test: Eickhorn CSAR II by Dietmar Pohl
* Tecnica: Materiali Per Coltelli da LC Coltelleria
* Test: Spyderco Jerry Hossom
* Profilo: Jurgen Schanz
* Vintage: Coltellate D'amore
* Test: Fox Intervention UNIFIL
* Intervista: Sandro Mariani
* Test: Steel Tac Commando
* Profilo: Carlo Cavedon
* Test: Viper Maremmano by Silvestrelli
* Storia: Alle origini dello stiletto
* Negozio: Coltelleria Riccadonna
* Test: Wenger New Ranger
* Test: Laguole en AubracL2008-42 -
Lame d'autore - Numero 44 - Aprile - Anno 2009 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…).
Ottima qualità grafica, contenuti discretamente documentati, precisi e aggiornati.
Alta qualità illustrativa
- Pag 80L2009-44 -
Lame d'autore - Numero 45 - Luglio - Anno 2009 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
INDICE:
* Reportage: XIV Espolama di Locarno
* Profilo: Chris Reeve
* Profilo: Francesco Casula
* Legge: Il coltello nel nostro diritto - parte 2
* Storia: Kukuri
* Test: Spyderco ParaMiliary
* Reportage: EXA 2009
* Test: Fox Profili Fixed
* Vintage: Il coltello e le danze popolari dell'800
* Storia: Frosolonesi D'america
* Profilo: Bruno Bruna "Graciùt"
* Test: Coltelli Case
* Test: Wenger Black Out
* Arte: Federica Montaldo
* Aziende: Helle
* Test: Mercury Pianure
* Negozio: Coltelleria Gasperi
* Test: Maserin BirdlandL2009-45 -
Lame d'autore - Numero 48 - Maggio - Anno 2010 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
INDICE:
* Reportage: XII Mostra di Roccagiovine
* Tecnica: Come realizzare un fodero in Kydex
* Test: Fox UTK 635T
* Test: Extrema Ratio MF1 ed Extrema Ratio MF2
* Profilo: Giorgio e Jarno Movilli
* Reportage: Shot Show
* Test: Mac San Marco
* Reportage: IWA 2010
* Test: Viper Venator
* Storia: Roncole
* Profilo: Roberto Bruci
* Test: Maserin Ram 501/OL
* Test: Spyderco Gayle BradleyL2010-48 -
Lame d'autore - Numero 49 - Settembre - Anno 2010 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
INDICE:
* Reportage: XII Mostra di Roccagiovine
* Tecnica: Come realizzare un fodero in Kydex
* Test: Fox UTK 635T
* Test: Extrema Ratio MF1 ed Extrema Ratio MF2
* Profilo: Giorgio e Jarno Movilli
* Reportage: Shot Show
* Test: Mac San Marco
* Reportage: IWA 2010
* Test: Viper Venator
* Storia: Roncole
* Profilo: Roberto Bruci
* Test: Maserin Ram 501/OL
* Test: Spyderco Gayle BradleyL2010-49 -
Lame d'autore - Numero 50 - Dicembre - Anno 2010 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
INDICE:
* Reportage: XII Mostra di Roccagiovine
* Tecnica: Come realizzare un fodero in Kydex
* Test: Fox UTK 635T
* Test: Extrema Ratio MF1 ed Extrema Ratio MF2
* Profilo: Giorgio e Jarno Movilli
* Reportage: Shot Show
* Test: Mac San Marco
* Reportage: IWA 2010
* Test: Viper Venator
* Storia: Roncole
* Profilo: Roberto Bruci
* Test: Maserin Ram 501/OL
* Test: Spyderco Gayle BradleyL2010-50 -
Lame d'autore - Numero 51 - Marzo - Anno 2011 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
INDICE:
* Reportage: XII Mostra di Roccagiovine
* Tecnica: Come realizzare un fodero in Kydex
* Test: Fox UTK 635T
* Test: Extrema Ratio MF1 ed Extrema Ratio MF2
* Profilo: Giorgio e Jarno Movilli
* Reportage: Shot Show
* Test: Mac San Marco
* Reportage: IWA 2010
* Test: Viper Venator
* Storia: Roncole
* Profilo: Roberto Bruci
* Test: Maserin Ram 501/OL
* Test: Spyderco Gayle BradleyL2011-51 -
Lame d'autore - Numero 53 - Ottobre - Anno 2011 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.L2011-53 -
Lame d'autore - Numero 54 - Ottobre - Anno 2012 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 88 Pagine
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.L2012-54 -
Lame d'autore - Numero 55 - Aprile - Anno 2012 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine
INDICE:
* Reportage: 34esima edizione Shot Show Las Vegas
* Reportage: CIC 2011
* Test: Spyderco - Des Horn - C153G
* Test: Maserin - Combat Ready
* Test: Lionsteel SR-1
* Test: Viper Tank
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.L2012-55 -
Lame d'autore - Numero 56 - Luglio - Anno 2012 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine
INDICE:
* Reportage: Coutellia
* Reportage: Exa
* Reportage: Sant'Oreste
* Test: Maserin - Diabolik
* Test: Opinel - Outdoor
* Test: Viper - Keeper
* Test: CRKT - Ripple
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.L2012-56 -
Pacchetto 3 riviste "Lame D'Autore" 2008
Pacchetto anno 2008
3 numeri: dal n. 38 al n.40.
Raccolte della rivista trimestrale Lame D'Autore.
Notizie e cuoriosità dal mondo delle lame:
- presentazioni e monografie dedicate ai più conosciuti ed apprezzati coltellinai italiani ed internazionali;
- novità dalle aziende;
- reportage da mostre e saloni;
- collezionismo;
- prove e recensioni;
- tecnica e cultura del coltello
e molto altro ancora, proposto da una delle più importanti ed autorevoli riviste dedicate agli appassionati di coltelli.
Stampa a colori, su carta patinata.lame2008 -
Pacchetto 4 riviste "Lame D'Autore" collezione 2005
Pacchetto completo anno 2005
4 numeri: dal n. 25 al n. 28.
Raccolte della rivista trimestrale Lame D'Autore.
Notizie e cuoriosità dal mondo delle lame:
- presentazioni e monografie dedicate ai più conosciuti ed apprezzati coltellinai italiani ed internazionali;
- novità dalle aziende;
- reportage da mostre e saloni;
- collezionismo;
- prove e recensioni;
- tecnica e cultura del coltello
e molto altro ancora, proposto da una delle più importanti ed autorevoli riviste dedicate agli appassionati di coltelli.
Stampa a colori, su carta patinata.lame2005 -
Pacchetto 4 riviste "Lame D'Autore" collezione 2006
Pacchetto completo anno 2006
4 numeri: dal n. 29 al n. 32.
Raccolte della rivista trimestrale Lame D'Autore.
Notizie e cuoriosità dal mondo delle lame:
- presentazioni e monografie dedicate ai più conosciuti ed apprezzati coltellinai italiani ed internazionali;
- novità dalle aziende;
- reportage da mostre e saloni;
- collezionismo;
- prove e recensioni;
- tecnica e cultura del coltello
e molto altro ancora, proposto da una delle più importanti ed autorevoli riviste dedicate agli appassionati di coltelli.
Stampa a colori, su carta patinata.lame2006 -
EnZo - Birk 75 knife - D2 - Curly Birch - 2530 - knife
Intended use: Hunting / Sports
Type of production: Semi-Industrial
Lama production: Finland
Blade: in steel D2
Blade treatment: -
Handle: birch root
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 178mm.
Thick when closed: 7mm.
Balancing: -
Weight: 100g.
Closure: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with EnZo logos
Notes: Scandi type sharpeningEN-2530 -
EnZo - PK 70 Flat - CPM-S30V - G10 Black - 2911 - knife
EnZo - PK 70 Flat - CPM-S30V - G10 Black - 2911 - knife
Intended Use: Hunting / Sports
Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel CPM-S30V
Treatment Lama: -
Handle: G10 Black
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thick when closed: 9mm.
Balancing: -
Weight: 78g.
Closure: Without lock blade - retention spring back
Clip: -
Sheath: -
Packaging: -
Notes: Sharpening type Scandi Zero
Notes: Cutlery Collini is distributor for Italy knives EnzoEN2911 -
EnZo - Trapper 95 - D2 - Green Canvas Micarta - 2016 knife
EnZo - Trapper 95 - D2 - Green Canvas Micarta - 2016 knife
Intended Use: Hunting / Sports
Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel D2
Treatment Lama: -
Handle: Micarta Green
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 207mm.
Thick when closed: -
Balancing: -
Weight: 146g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi
Notes: Cutlery Collini is distributor for Italy knives EnzoEN2016 -
EnZo - Elver 85 - D2 - Green Canvas Micarta - 2205 knife
EnZo - Elver 85 - D2 - Green Canvas Micarta - 2205 knife
Intended Use: Hunting / Sports
Production Type: Semi-Industrial
Production Lama: Finland
Blade: Steel D2
Treatment Lama: -
Handle: Micarta Black Green
Blade length: 80mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type FlatEN2205 -
Conaz Consigli Scarperia - Hunchback Abruzzese Cattle knife 24cm - knife
This slender-shaped knife with a curved handle derives from ancient models used by the shepherds of Abruzzo. Its adoption in the repertoire of knives manufactured in Scarperia (where the particular crease of the handle earned it the name of "hunchback") dates back to the late nineteenth century and took place without flashy changes compared to the original type, equipped with a simple spring and one-piece bovine horn handle. This model is in horn tip.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 105mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 247mm.
Weight: 107g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50024 -
Conza Consigli Scarperia - Maremmano knife 24cm Ox Horn - 50031 - knife
The first certain information on this knife dates back to 1848. A specimen, dated 1871, is kept in the State Archives of Florence, attached to the documents of a trial against a convicted person. The mark of a Scarperia manufacturer, Gustavo Buffi, is clearly visible on it, the shape of the blade is that with an angled back, also maintained in the twentieth century and present in the catalogs of various firms in Scarperia. The Maremmano is a horn tip model.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 120g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
R-MFC24 -
Consigli Scarperia - Napoletano in bovine R-NAC20 - knife
The "Neapolitan" old drives is a knife in horn tip elongated, suitable to cut the use of tip. It is not clear which of the knives of the traditional Neapolitan is inspired model of Scarperia. The general line is somewhat related to the "Maremma" in the form assumed in the Mugello, but with more slender proportions and read.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tipR-NAC20 -
Consigli Scarperia - Casertano in bovine R-CASC20 - knife
The most striking feature of this model is in the edge of the blade, a full right to the tip. The Casertano lent itself well to a variety of uses, thanks to the cutting edge straight that finishes in a very simply shaped handle. This solution was very appreciated in different times and places, even outside the area where it originated, as to be still widespread. The Caserta is a model in horn tip.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 70 gr.
Handle in horn tipR-CASC20 -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 20cm - 53162 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53162 -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 24cm - 53164 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 83g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53164 -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 27cm - 53165 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 110mm.
Blade thickness: 3mm.
Length closed: 145mm.
Total length: 265mm.
Weight: 102g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
PBM27G -
Strider Knives - AR Tiger Stripe Coyote Tan - knife
Intended Use: Tactical
Type of production: Semi-Craft
Production Lama USA
Blade: Stainless steel CPM-S30V
Treatment Blade: Tiger Stripe
Handle: with G10 scales with titanium liners 2mm
Blade length: 103mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 240mm.
Thick when closed: 18mm.
Balance: -
Weight: 244g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: -
Notes: Hardened by Paul Bos, with logo on the right heel of the blade10916 -
Consigli Scarperia - Zuava Cattle Polished R-ZXC19 - knife
Zuava Cattle Polished R-ZVC19 - knife
Traditional knife of Scarborough and is used in all of Tuscany to the first 800. He had an element of novelty, for its time: the metal frame inside the handle as well in traditional cattle.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 19 cm.
Weight 100 gr.R-ZXC19