Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fallkniven - F1 Elmax - 40th Anniversary Set - Limited Edition - knife
Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.
The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.
Intended use: allrounder utilityBlade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpenerF-F1anniv -
Fallkniven - H1 Zytel - Elmax & Thermorun - Swedish hunting knife
The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.
The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!
Intended use: huntingType of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -F-H1zElmax -
Fallkniven - F1 Pro Knife Survival Kit - USED - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory
Intended Use: Hiking / All round utilityBlade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather caseF-F1PRO-CP -
Ka-Bar - TDI Pocket Strike - Karambit Knife - 2491 - knife
Intended use: Tactical / EDC
Production type: Industrial
Country of manufacture: Taiwan
Blade: Full tang in AUS-8 57/59HRC stainless steel
Blade finish: Powder coated
Handle: Zytel
Blade length: 80mm.
Blade thickness: 3.7mm.
Total length: 197mm.
Weight: 117g. (172g. with sheath)
Sheath: ABS with clip
Notes: -KB-2491 -
Ka-Bar BK&T - Becker Harpoon Black Survival Knife - BK18BK - knife
Intended Use: Bushcraft / Outdoor
Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan BeckerColtelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.
KB-BK18BK -
BlackFox - Artia by Grigorii Matveev - D2 Green G-10 - BF-765OD - knife
Intended Use: EDC / Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2 at 59/61HRC
Blade treatment: Stonewashed
Handle: G-10
Blade length: 93mm.
Blade thickness: 3.4mm.
Total length: 203mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-765OD -
BlackFox - Acutus by Grigorii Matveev - D2 Black G-10 - BF-764BB - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: D2 tool steel at 59/61HRC
Blade treatment: Black PTFE
Handle: G-10
Blade length: 90mm.
Blade thickness: 3.4mm.
Total length: 195mm.
Weight: 115g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-764BB -
BlackFox - Nix by Grigorii Matveev - D2 Orange G-10 - BF-763OR - couteau
Usage prévu : EDC / Sport
Type de production : Industriel
Pays de production : Chine
Lame : Acier à outils D2 à 59/61HRC
Traitement de la lame : PTFE noir
Manche : G-10
Longueur de la lame : 55mm.
Epaisseur de la lame : 3.5mm.
Longueur totale : 132mm.
Poids : 90g.
Clip : Acier inoxydable, amovible et réversible
Fermeture : Liner Lock
Emballage : boîte en carton avec les logos BlackFox
Notes : Design par Grigorii MatveevBF-763OR -
BlackFox - Nix by Grigorii Matveev - D2 Brown Micarta - BF-763 - knife
Intended Use: EDC / Sporty
Type of production: Industrial
Country of Production: China
Blade: D2 tool steel at 59/61HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade Length: 55mm.
Blade thickness: 3.5mm.
Total length: 132mm.
Weight: 90g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-763 -
Ka-Bar - USMC Fighting Knife 125th Anniversary Special Edition - 9226 - knife
The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for U.S. troops in World War II and since then its effectiveness has been universally recognized and employed in many other military scenarios. With this special edition, Ka-Bar celebrates the company's 125th anniversary.
Intended Use: Tactical/Military
Blade: 1095 carbon steel 56/58HRC
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: backward
Weight: 305g.
Sheath: leather
Notes: special edition to celebrate the company's 125th anniversaryKB-9226 -
BlackFox - Folding Rescue Knife - Red - BF-117 - knife
Intended Use: EDC / Rescue
Production type: Industrial
Country of manufacture: China
Blade: Steel 440 HRC 55-57
Blade treatment: satin finish
Handle: Aluminium T6-6082 anodised red
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 208mm.
Weight: 169g. (204g. including sheath)
Clip: -
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: glass breaker - 7, 8 and 10 mm bolt insert - oxygen cylinder opening insert - nylon sheathBF-117 -
BlackFox - Folding Rescue Knife - Black - BF-115 - knife
Intended Use: EDC / Rescue
Production type: Industrial
Country of manufacture: China
Blade: Steel 440 HRC 55-57
Blade treatment: varnishing
Handle: G10
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 208mm.
Weight: 162g. (197g. including scabbard)
Clip: -
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: glass breaker - 7, 8 and 10 mm bolt insert - oxygen cylinder opening insert - nylon sheathBF-115 -
BlackFox - Viator by Alfredo Doricchi - D2 Grey Micarta - BF-731D2MG - knife
Intended Use: Bushcraft / Outdoor
Type of production: Industrial
Country of Production: China
Blade: full tang in D2 carbon steel hardened to 58/60HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 165g.
Sheath: made of Kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: tinder box for lighting the fire included, to be inserted in the scabbard - Design by Alfredo DoricchiBF-731D2MG -
BlackFox - Argus by Grigorii Matveev - Zebrano Wood - BF-760W - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Satin finish
Handle: Zebrano wood
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 202mm.
Weight: 70g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper opening system - Design by Grigorii MatveevBF-760W -
BlackFox - Argus by Grigorii Matveev - Black G10 - BF-760 - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: G10
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 202mm.
Weight: 75g.
Clip: stainless steel, removable
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper opening system - Design by Grigorii MatveevBF-760 -
BlackFox - Feresa by Grigorii Matveev - Green - BF-762OD - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: aluminum
Blade length: 83mm.
Blade thickness: 3mm.
Total length: 191mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-762OD -
BlackFox - Feresa by Grigorii Matveev - Black - BF-762BB - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: aluminum
Blade length: 83mm.
Blade thickness: 3mm.
Total length: 191mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-762BB -
BlackFox - Puck by Grigorii Matveev - Red G10 - BF-761R - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: Blackwash
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii MatveevBF-761R -
BlackFox - Puck by Grigorii Matveev - OD Green G10 - BF-761OD - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: satin finish
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii MatveevBF-761OD -
BlackFox - Puck by Grigorii Matveev - Black G10 - BF-761B - knife
Intended Use: EDC / Sporty
Production type: Industrial
Country of Production: China
Blade: tool steel D2
Blade treatment: satin finish
Handle: G10 with aluminum spacer
Blade length: 49mm.
Blade thickness: 3mm.
Total length: 107mm.
Weight: 70g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Carson Flipper type opening system - Design by Grigorii MatveevBF-761B -
BlackFox - Vesuvius knife Black - D2 - by Alfredo Doricchi - BF-710 - knife
Intended use: Bushcraft / Outdoor
Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: Black G10 with removable orange paracord
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 239g.
Sheath: Kydex, with Tek-Lok attachment
Packaging: cardboard box with BlackFox logos
Notes: Fire starter included, to be inserted in the scabbard - Design by Alfredo DoricchiBF-710D2 -
BlackFox - Vesuvius knife - D2 - by Alfredo Doricchi - BF-710 OD - knife
Intended use: Bushcraft / Outdoor
Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Black G10 with removable orange paracord
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 220mm.
Weight: 239g.
Sheath: in Kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Lock to light the fire included, to be inserted in the scabbard - Design by Alfredo DoricchiBF-710-OD-D2 -
Ka-Bar - Wrench neck Knife - 1119 - knife
The KA-BAR Wrench Knife 1119 is a neck knife whose design is based on knives that are sometimes forged from old wrenches by knife enthusiasts. KA-BAR has used these characteristic shapes and transformed them into this cute knife.
KA-BAR used 425 to forge this knife. This is a slightly improved version of the popular 420 steel. Stainless, durable, easy to sharpen. The KA-BAR 1119 wrench knife comes with an elegant plastic sheath, without belt clip.
Intended use: Tactical / Utility
Type of production: Industrial
Country of production: USA
Blade: 425 stainless steel
Blade treatment: -
Handle: -
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 182mm.
Weight: 91g.
Sheath: in ABS
Packaging: rigid packaging with Ka-Bar logos
Note: -The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-1119 -
Fallkniven - F1 Wolf - VG-10W Laminated and Leather Sheath - knife
New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.
Intended use: tactical/military/huntingBlade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995.F-F1LW -
BlackFox - Golem by Denis Simonutti - BF-757OD - knife
Intended Use: Bushcraft / Outdoor
Production type: Industrial
Country of Production: China
Blade: Full tang in D2 59/61HRC steel
Blade Finish: Stonewashed
Handle: G10
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 270mm.
Weight: 290g.
Sheath: kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Design by Denis SimonuttiBF-757OD -
BlackFox - Lynx by Denis Simonutti - BF-756OD - knife
Intended Use: Bushcraft / Outdoor
Production type: Industrial
Country of Production: China
Blade: Full tang in D2 59/61HRC steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 110mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 180g.
Sheath: kydex, with Tek-Lok type attachment
Packaging: cardboard box with BlackFox logos
Notes: Design by Denis SimonuttiBF-756OD -
BlackFox - Nu-Bowie by Kean Alfaro - Green Micarta - BF-758MI - folding knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: micarta
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Clip: stainless steel, removable and reversible, deep pocket type
Closure: Button Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758MI -
BlackFox - Nu-Bowie by Kean Alfaro - Black G10 - BF-758 - folding knife
Intended Use: Sporting
Type of production: Industrial
Country of Production: China
Blade: D2 steel
Blade finish: black coating
Handle: G10
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 80g.
Locking system: Button Lock
Clip: stainless steel, removable and reversible, deep pocket type
Packaging: cardboard box with BlackFox logos
Notes: Design by Kean AlfaroBF-758 -
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmax -
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmax -
BlackFox - Lollypop Fixed by Tommaso Rumici - BF-755 - coltello
Destinazione d'uso: Outdoor / Utility / EDC
Tipo di produzione: Industriale
Paese di produzione: China
Lama: Acciaio Inox 440C
Trattamento lama: Blackwashed
Manicatura: G-10
Lunghezza lama: 55mm.
Spessore lama: 3.5mm.
Lunghezza totale: 115mm.
Peso: 71g.
Fodero: in Kydex, con clip in acciaio inox
Confezione: scatola in cartone con loghi BlackFox
Note: Design by Tommaso RumiciBF-755 -
BlackFox - Plan B Rescue Tool by Tommaso Rumici - BF-754 - knife
Intended Use: Rescue Tool / Utility
Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 45mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 80g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso RumiciBF-754 -
BlackFox - Arrow Fixed by Tommaso Rumici - BF-753 - knife
Intended Use: EDC / Utility / Tactical/
Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C
Blade Treatment: Blackwashed
Handle: G-10
Blade Length: 55mm.
Blade thickness: 3.5mm.
Total lenght: 115mm.
Weight: 71g.
Sheath: Kydex, with stainless steel clip.
Package: cardboard box with BlackFox logos
Notes: Design by Tommaso RumiciBF-753 -
Ka-Bar - Mini Dozier Folding Hunter knife 4072ZG - Zombie Green - knife
Intended use: tactical
Blade: AUS 8A stainless steel
Handle: Zytel
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed length: 87mm.
Total length: 147mm.
Balancing:
Weight: 22g.
Closure: back lock
Opening: -
Clip: in steel
Design: by Bob DozierProduction: Taiwan
The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-4072ZG -
Fallkniven - FDC - Double sharpener - diamond (25 microns) and ceramic (9 microns) - sharpening accessory
Support with two different bars, one in ceramic and one in diamond.
The yellow diamond sharpening stone (25 microns) is used to make a fine sharpening, with the white ceramic stone (9 microns) the edge of the knife is polished in order to obtain a razor-sharp edge.
For cleaning, use some dish soap and hot water.
Dimensions of the diamond / ceramic part:
10 cm x 2 cm
Total size open with plastic handle:
22 cm
Closed size:
12 cm x 3 cm
Weight: 65 gr
F-FDC -
Fallkniven - FDD - Double diamond sharpener - 25 and 44 microns - sharpening accessory
Diamond sharpening with two different sharpening grits.
The yellow surface consists of titanium and aluminum nitride which greatly prolongs the life of the sharpener. The rough side (44 microns) is used to recover more damaged cutting edges, while the fine side (25 microns) is used for precision sharpening.
For cleaning, use dish soap and warm water.
Like all diamond sharpeners, this whetstone is a little rough at first, but gets smoother after a period of use.
Dimensions of the diamond part:
10 cm x 2 cmTotal open size with plastic handle:
22 cmClosed size:
12 cm x 3 cm
Weight: 67 grF-FDD -
Fallkniven - PXLey Folding Knife - Elmax - Elforyn - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Elforyn with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steelF-PXLey -
Fallkniven - PXLbl Folding Knife - Elmax - Black Micarta - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steelF-PXLbm -
Fallkniven - P3Gic Folding Knife - Desert Ironwood - knife
Intended use: sporting
Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -F-P3Gic -
Fallkniven - RL1EY - Elforyn - Folding Knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010.
Intended use: collectible/sporty
Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon
Notes: -F-RL1EY -
Fallkniven - R2 Scout Survival - Elmax - knife
Intended use: Hiking / Utility
Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex typeF-R2Z-Scout -
Ka-Bar - Becker Linen Micarta Scales Full Size - BK77BLKHNDL - Knives Accessories
Pair of original Ka-Bar handles/scales, made in USA, designed to replace the original nylon handle of Becker BK series models.
Package Contents: Pair of handles
Country of Production: USA
Material: Black Linen Micarta
Replacement screws present: No
Packaging: Transparent plastic bag
Compatibility with Ka-Bar models:
* BK2
* BK3
* BK4
* BK5
* BK7
* BK9
* BK10
* BK20
* BK21
* BK22
* BK29
* BK32
* BK39KB-BK77BLKHNDL -
Fallkniven - RL1di knife - Desert Ironwood - knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.
Intended use: collection / sports
Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:F-RL1DI -
Ka-Bar - Dozier Folding Hunter knife 4062D2 - Coyote Blue Zytel Handle - knife
Intended use: tactical
Blade: D2 Coyote Tan steel
Handle: Zytel
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 183mm.
Balancing:
Weight: 62g.
Closure: back lock
Opening: -
Clip: in steel
Design: by Bob DozierProduction: Taiwan
The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-4062D2 -
BlackFox - B-Key - EDC Pocket Knife - OD Green - BF-750OD - knife
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: 440A steel HRC 57-59
Blade treatment: stone washed
Handle: Anodized aluminum with 420J2B stainless steel liner
Blade length: 45mm.
Blade thickness: 4mm.
Total length: 105mm.
Weight: 70g.
Clip: Stainless steel 420J2B, removable
Closure: Frame Lock
Packaging: Cardboard box with BlackFox logos
Notes: -BF-750OD -
BlackFox - B-Key - EDC Pocket Knife - Blue - BF-750BL - knife
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: 440A steel HRC 57-59
Blade treatment: stone washed
Handle: Anodized aluminum with 420J2B stainless steel liner
Blade length: 45mm.
Blade thickness: 4mm.
Total length: 105mm.
Weight: 70g.
Clip: Stainless steel 420J2B, removable
Closure: Frame Lock
Packaging: Cardboard box with BlackFox logos
Notes: -BF-750BL -
BlackFox - B-Key - EDC Pocket Knife - Black - BF-750 - knife
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: 440A steel HRC 57-59
Blade treatment: stone washed
Handle: Anodized aluminum with 420J2B stainless steel liner
Blade length: 45mm.
Blade thickness: 4mm.
Total length: 105mm.
Weight: 70g.
Clip: Stainless steel 420J2B, removable
Closure: Frame Lock
Packaging: Cardboard box with BlackFox logos
Notes: -BF-750 -
Ka-Bar - Becker Folder - BK40 - knife
Intended Use: Sporting / Light Utility
Production type: Industrial
Country of Production: China
Blade: Stainless steel AUS8A 55/58HRC
Blade treatment: Satin finish
Handle: GFN PA66
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 126mm.
Total length: 216mm.
Weight: 154g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard and plastic box with Ka-Bar logos
Notes: -KB-BK40 -
Ka-Bar - TDI Ladyfinger - 1494 - knife
Intended use: Tactical / EDC
Production type: industrial
Country of Production: Taiwan
Blade: full tang in stainless steel AUS-8 57/59HRC
Blade finish: Powder coated
Handle: Zytel
Blade Length: 48mm.
Blade thickness: 2mm.
Total length: 121mm.
Weight: 68g.
Sheath: ABS with clip
Notes: -KB-1494 -
Ka-Bar - USSF TDI Astro MP - 1480SF - knife
Intended Use: Tactical / Collection
Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSFKB-1480SF -
Ka-Bar - USSF Space-Bar Plain Edge - 1313SF - knife
The KA-BAR 1313SF Space-Bar Knife USSF is the new legendary fixed knife produced for the United States Space Force. A unit of the United States Army working in space, founded in 2019. No, this is not the pilot episode of a new TV series, this is real!
This 131SF version is acaracterized by a light blue Kraton handle. A rubber-like material that offers great grip regardless of the circumstances. The 1313SF comes with a solid thermoplastic scabbard. Ready to go to Infinity and beyond!
Intended use: military / collectionProduction type: industrial
Country of manufacture: USA
Blade: carbon steel 1095 56/58HRC
Blade finish: powder coated
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 300mm.
Balance: set back 1.5cm.
Weight: 300g.
Sheath: thermoplastic, belt.
Notes: knife made for USSFKB-1313SF -
BlackFox - Pocket knife EDC - Black G10 - BF-752 - folding knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Steel 440C HRC 57-59
Blade treatment: stone washed
Handle: G10 with stainless steel frame lock
Blade length: 50mm.
Blade thickness: 3mm.
Total lenght: 115mm.
Weight: 70g.
Clip: Stainless steel, removable
Closure: FrameLock
Package: Cardboard box with BlackFox logos
Notes: -BF-752 -
BlackFox - Explorator by Alfredo Doricchi - BF-749 - knife
Intended Use: Bushcraft / Outdoor
Production type: Industrial
Country of Production: China
Blade: Stainless Steel 440C HRC 57-59
Blade Treatment: Stonewashed
Handle: Micarta
Blade Length: 100mm.
Blade thickness: 4mm.
Total lenght: 220mm.
Weight: 180g.
Sheath: Kydex, with Tek-Lok type fitting
Package: Cardboard box with BlackFox logos.
Notes: Tinderbox to light the fire to be inserted in the sheath - Design by Alfredo DoricchiBF-749 -
BlackFox - Pocket knife EDC - OD Green G10 - BF-752OD - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Steel 440C HRC 57-59
Blade treatment: stone washed
Handle: G10 with stainless steel frame lock
Blade length: 50mm.
Blade thickness: 3mm.
Total lenght: 115mm.
Weight: 70g.
Clip: Stainless steel, removable
Closure: FrameLock
Package: Cardboard box with BlackFox logos
Notes: -BF-752OD -
BlackFox - Revolver Flipper Knife - Green Micarta - BF-740OD - folding knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 carbon steel
Blade treatment: satin finish
Handle: OD Green micarta with stainless steel liners
Blade length: 95mm.
Blade thickness: 4mm.
Total length: 215mm.
Weight: 118g.
Clip: stainless steel, removable
Closure: Liner Lock
Package: cardboard box with BlackFox logos
Notes: -BF-740OD -
Fallkniven - Taiga Forester - TF1 - SanMai CoS Steel - Desert Ironwood - knife
Intended Use: Hiking / Hunting / Collection
Production type: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade Treatment: Satin finish
Handle: Desert Ironwood
Blade Length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 230g.
Sheath: zytel
Notes: -F-TF1Z -
Fallkniven - Taiga Forester - TF2 - SanMai CoS Steel - thermorun - knife
Intended use: Hiking / Hunting
Type of production: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 185g.
Scabbard: zytel
Notes: -F-TF2Z -
Ka-Bar - TDI Large knife - 02-1482 - knife
Intended use: tactical / military
Type of production: industrial
Blade: stainless steel AUS-8 57/59 HRC with solid shank
Blade treatment: nitriding
Handle: Zytel
Blade length: 93mm.
Blade thickness: 4.5 mm.
Closed length: -
Total length: 194 mm.
Balancing: -
Weight: 186 g
Closure: -
Clip: -
Case: ABS
Note: -KB-1482 -
Fallkniven - Taiga Hunter knife - TH - SanMai CoS Steel - thermorun - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.If you look at function and most value for money, the rubber-handle Taiga blades should be preferred. Regardless of the weather and wind, the rubber handle gives a really good grip and when it comes to the steel properties they are of course as good as the knives with wooden handles.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -F-TH2Z -
Fallkniven - Taiga knife SK2L - SanMai CoS Steel - ironwood - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.As shown in the design, TH1 is a handmade knife with a handle in the very exclusive desert ironwood (lat. Olneya tesota). This species is not listed in CITES Annexes or the IUCN Red List of Endangered Species and is therefore legal to use. Like all natural materials, it varies in texture and color, making each knife an individual creation. A beautifully veined pattern may look attractive but a straight, patterned handle is actually stronger. Desert ironwood, which grows in the southwestern United States, has a somewhat peculiar quality – it is heavier than water, its density is 1.2 kg/dm³ which means it will sink. If you want to maintain or even increase the luster in the wood, treat it with log oil, furniture oil, bench oil or other type of wood oil containing linseed oil. The fact that the blade goes full width through the handle (so-called full tang blade) results in a very strong and reliable construction and gives a comfortable weight to the knife.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -F-TH1Z -
Ka-Bar BK&T - Becker Harpoon Survival knife BK18 - knife
Intended use: Bushcraft / Outdoor
Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan BeckerCollini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-BK18 -
Ka-Bar - TDI Investigator Law Enforcement - 1493 - knife
Intended use: tactical / military
Type of production: industrial
Country of production: Taiwan
Blade: full tang in AUS-8 57 / 59HRC stainless steel
Blade treatment: nitriding
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 127mm.
Weight: 68g.
Sheath: in ABS with clip
Notes: smaller version of the TDI Law Enforcement 1480 modelKB-1493 -
Ka-Bar - USMC Commemorative Presentation Grade Fighting Knife - 1215 - knife
The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.
This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / MilitaryBlade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -KB-1215 -
Fallkniven - Embla knife SK2L - SanMai CoS Steel - ironwood - knife
Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -F-SK2L -
Fallkniven - S1x Survival Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1X