Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Laguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife
These high quality knives, are handcrafted in the tradition of French Thiers cutlery.
This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.
The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.
The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly.
The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs.
The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.
Intended Use: Regional/Collection/Outdoor/Hunting
Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0514EBI -
Laguiole - En Aubrac - Trappeur Olive knife - knife
Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.
Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:LEA-T-W -
Laguiole - En Aubrac - Trappeur Olive knife - knife
Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.
Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:L0514TOLI -
Rick Hinderer Knives - Half Track G10 Green - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Green
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: 99mm.
Overall length: 169mm.
Thickness when closed:
Weight: 119g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2009SGSOD -
Rick Hinderer Knives - Half Track Ti - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: 99mm.
Overall length: 169mm.
Thickness when closed:
Weight: 125g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2009STSTI -
Rick Hinderer Knives - Half Track G10 Black - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Black
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: 99mm.
Overall length: 169mm.
Thickness when closed:
Weight: 119g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2009SGSBL -
Rick Hinderer Knives - XM-18 - Bowie 3.5 "G10 Green / Black - semi custom knife
Cutlery Collini is an authorized dealer of products knives Rick Hinderer
Use: Tactical / Collection
Type of production: semi-custom
Production Country: USA
Blade: CPM-S35VN stainless steel 61 / 62HRC
Blade Treatment: Stonewashed
Handle: Titanium and G10 Green / Black
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 123mm.
Overall length: 207mm.
Weight: 154g.
Lock: Frame Lock type
Clip: stainless steel
Notes: -K2032SGSGB -
Hinderer Knives - XM-18 - Spanto 3.5" Gen IV - Carbon Fiber with Flaming Horse Clip - custom knife
Intended use: Tactical / Collection
Type of production: custom
Country of Origin: USA
Blade: CPM-S35VN Stainless Steel 61 / 62HRC
Blade treatment: Stonewashed
Handle: grip plate in 3mm carbon fiber liner of titanium 6AL4V 1mm thick. Frame titanium 6AL4V, billet, 4mm thick with Hinderer Lockbar Stabilizer. Spacers and screws 17-4 PH stainless steel
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 120mm.
Overall length: 270mm.
Thick when closed: 13mm.
Weight: 175g.
Lock: Frame Lock type
Clip: 17-4 PH stainless steel, custom by Rick Hinderer, with Flaming Horse Design
Notes: Lanyard black paracord with wire stop in 6AL4V titanium billet, with a diameter of 9mm, custom by Rick Hinderer12478