Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
United Cutlery - M48 Conflict Cleaver - UC3425 - knife
Intended Use: Tactical / Military
Production Type: Industrial
Country of Production: China
Blade: Full tang in 2Cr13 stainless steel
Blade finish: Dual Tone: satin with black finishing
Handle: FRN (Fiberglass and Nylon)
Blade length: 158mm.
Blade thickness: 8mm.
Total length: 286mm.
Weight: 760g.
Sheath: Belt, for vertical carrying, made of polymer (Vortec) and nylon.
Package: Cardboard box with United Cutlery logos.
Notes: -UC3425 -
United Cutlery - M48 Highland Sgian Dubh - UC3154 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: China
Blade: 2Cr13 stainless steel
Blade finish: Dual Tone: satin with black finishes
Handle: TPR (Thermoplastic Rubber)
Blade length: 133mm.
Blade thickness: 7mm.
Total length: 241mm.
Weight: 184g.
Sheath: belt, for vertical port, in TPU (Thermoplastic Polyurethane)
Packaging: Cardboard box with United Cutlery logos
Note: -UC3154 -
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife
This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.
Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs
Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm50075 -
Conaz Consigli Scarperia - Buffalo horn screed - Kilama 50159 series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Weight: 63g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case50159 -
United - M48 Zombie Apocalypse Axe - UC2946 - Tomahawk
This M48 Apocalypse tactical tomahawk is the ultimate tactical weapon. It is lightweight to be carried all day without added muscle fatigue and the blade of this offers a wide, upswept axe blade for mammoth chopping, slashing and zombie cutting potential. The secondary edge on the back side of the head is specially sharpened on both edges for a cutting and hooking attack. When combined, the spike and axe head make for an efficient personal defense and breaching tool against the zombie horde. The blade is securely attached to the paracord-wrapped, 30% nylon reinforced handle with three separate bolts. Includes a durable nylon belt sheath with belt loop and snap closure buttons. 8" bl, 15" overall10850 -
United - Blade Trinity Saber - Official Reproduction UC1452 - knife
From the dynamic universe of the "Blade" film comes this authenticated and officially licensed reproduction of the "Blade Trinity", directed from the final film in the trilogy.
This piece dating back to 2005 was designed directly from the original film studio prop and measures over 30cm in length. Every detail has been precisely replicated to satisfy even the most demanding collectors.
The 16.5cm long blade is made of mirror-polished 420 stainless steel and the handle features an antique silver plated finish with solid metal parts and a black rubber handle.
Each dagger is accompanied by a black enameled wood and stainless steel display stand featuring BLADE's logo medallion, from which the blade can be removed for display.
This collectible is a must for fans of the daytime vampire hunter, Blade, played by Wesley Snipes, in his final conflict against the vampires in the film "Blade Trinity", written and directed by David S. Goyer.
UC1452 -
Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife
Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50002 -
Conaz Consigli Scarperia - Pattada Brotzu knife ox horn - 53143 - 24cm - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 76g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53143 -
United - Kempo II UC1168 + Pro Guide Hunter UC1203 - knives by Gil Hibben - PRIVATE COLLECTION
Rare pair of knives produced by United and designed by the renowned knives maker Gil Hibben. These knives come from a private collection and are in excellent condition, with original box but without sheath
United Kempo II UC1168
This model stands out for its unique features, suitable for Kenpo Karate enthusiasts. The UC1168 Kempo II knife, introduced in 1998 and later replaced by the Alaskan knife in 2003, features a Kenpo Karate emblem on the handle. The design includes a grip-enhancing angled guard, stylized after Kenpo's "Chinese Fist" grip for added stability and control. This knife measures approximately 31cm in total with an 18cm blade, made from stainless steel.Type of production: industrial
Blade: 420 stainless steel
Country of production: Taiwan
Handle: micarta
Blade length: 165mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Weight: 521g.
Sheath: without sheath
Notes: original box, produced in 1998The handle design and medallion make it a distinctive piece in any collection.
It comes in the original box, maintaining its impeccable condition, although it lacks a scabbard.
Pro Guide Hunter UC1203
The Pro Guide Hunter UC1203, dated 1999, is ideal for hunting and outdoor activities. This knife is manufactured by United Cutlery under the design expertise of Gil Hibben. The Pro Guide Hunter is recognized for its sturdy construction and ergonomic handle, which ensures comfort and efficiency during use. Like the UC1168, it is sold with its original box but without the sheath.Type of production: industrial
Blade: 420 stainless steel
Country of production: Taiwan
Handle: micarta
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 235mm.
Weight: 207g.
Sheath: without sheath
Notes: original box, produced in 1999AP-UC1168-1203 -
TRC Knives - Splinter 120 - M390 & Black Canvas Micarta - knife
Intended Use: Hunting / Fishing / Sporting
Production type: Industrial
Country of Production: Lithuania
Blade: Full tang stainless steel M390 60/61HRC
Blade Finish: Satin
Handle: Black Canvas Micarta
Blade length: 120mm.
Blade thickness: 3.4mm.
Total length: 242mm.
Balance: on guard branch
Weight: 140g.
Scabbard: leather
Package: cardboard box with TRC knives logos, certificate of production, TRC sticker,
Notes: -TRC-S120 -
United Cutlery - M48 Liberator Falcon Karambit - UC3334 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: China
Blade: full tang in 2Cr13 stainless steel
Blade finish: Dual Tone: satin with black finishes
Handle: FRN (Fiberglass and Nylon)
Blade length: 133mm.
Blade thickness: 7mm.
Total length: 260mm.
Weight: 340g.
Sheath: belt, for vertical port, in polymers and nylon
Packaging: Cardboard box with United Cutlery logos
Note: -UC3334 -
United Cutlery - M48 Tactical Kukri with sheath - UC3160 - knife
Intended use: Sports / Collection
Type of production: Industrial
Lama production: China
Blade: 2Cr13 stainless steel
Blade treatment: satin with black finish
Handle: TPR
Blade length: 240mm.
Blade thickness: 8mm.
Length closed: -
Total length: 400mm.
Thick when closed: -
Balancing: -
Weight: 550g.
Closing: -
Clip: -
Sheath: in black polymers
Packaging: Cardboard box with United Cutlery logos
Note: -UC3160 -
TRC Knives - This is Freedom - M390 & Black Canvas Micarta - Knife
Intended use: Hunting / Fishing / Sports
Type of production: Industrial
Country of production: Lithuania
Blade: full tang stainless steel M390 60 / 61HRC
Blade finish: Satin
Handle: Black Canvas Micarta
Blade length: 118mm.
Blade thickness: 3.4mm.
Total length: 240mm.
Balancing: on the guard branch
Weight: 145g.
Sheath: in leather
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manualTRC-TIF -
TRC Knives - Classic Freedom Knife - M390 & Black Canvas Micarta - Knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: Lithuania
Blade: full tang in M390 stainless steel 61 / 62HRC
Blade finish: Satin
Handle: Black Canvas Micarta
Blade length: 92mm.
Blade thickness: 2.7mm.
Total length: 205mm.
Balancing: on the guard branch
Weight: 100g.
Sheath: in leather
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manualTRC-CFR -
United - Hibben Magnum Bowie Knife GH5050 - Coltello
Type of production: industrial
Lama production: China
Blade: 3Cr13 steel
Blade treatment: satin finish
Handle: micarta
Blade length: 325mm.
Blade thickness: 4mm.
Total length: 470mm.
Balancing: set back
Sheath: leather sheath
Packaging: in cardboard
Weight: 710 gr.
Invia commenti
Cronologia
Salvate
CommunityGH5050 -
United - M48 Tactical War Hammer - UC3069 - Tomahawk
Type of production: Industrial
Country of production: China
Blade: stainless steel 2Cr13
Blade treatment: Black Oxide Coating
Handle: Nylon and Glass Fiber
Blade length: 98.5mm. (only sharp) 197mm (with hammer)
Blade thickness: 10mm. In the central point
Total length: 393mm
Weight: 860g.
Sheath: TPR blade cover (thermoplastic rubber)
Packaging: cardboard box with United Cutlery logos
Note: -UC3069 -
United - M48 Camp Hawk Axe - UC3118 - Tomahawk
Type of production: Industrial
Lama production: China
Blade: stainless steel 2Cr13
Blade treatment: Painting
Handle: Nylon and Glass Fiber
Blade length: 18 cm
Blade thickness: 10mm. In the central point
Length closed: -
Total length: 22.5 cm
Thickness when closed: -
Balancing: -
Weight: 355g.
Closure: -
Clip: -
Sheath: Nylon
Packaging: cardboard box with United Cutlery logos
Note: -UC3118 -
United Cutlery - U.S.M.C 2025 UC977 knife - PRIVATE COLLECTION - vintage knife
A true rarity for collectors! We present an original Bowie knife with a 7" blade made by United Cutlery in the late 1990's.
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Present
* Sheath: Present
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory
Intended use: Sports / CollectionType of production: Industrial
Country of production: USA
Blade: 1090 carbon steel
Blade finish: epoxy powder
Handle: polymer
Blade length: 170mm.
Blade thickness: 4mm.
Total length: 175mm.
Weight: 119g.
Packaging: Cardboard box with United and USMC 2025 logos
Notes: 1996The blade is marked "United" on the left ricasso and with the factory model number "UC 977/ U.S.A." on the right ricasso.
Guard and knob are made of steel, while the handle is made of black ABS.
AP-UC977 -
Harley Davidson Freedom Blade 1999 Limited Edition - Knife
Harley Davidson Freedom Blade 1999 Limited Edition - Knife
Intended Use: Collection
Official Harley Davidson Product Freedom Collection Limited Edition 5000 pieces produced by United Cutlery
Type of production: Industrial
Production Blade: Taiwan
Blade: stainless steel 420
Treatment Blade: -
Handle: Metal
Blade length: 230mm.
Blade thickness: 4mm.
Length closed: -
Overall length: 430mm.
Balancing: -
Weight: 780g.
Closure: -
Clip: -
Support: wooden wall with leather
Packing: Guard and false gold plated - Warranty - Cardboard box logos with The Expendables
Note: Certificate of authenticity '- serial number engraved on the bladeHD-2 -
Consigli Scarperia - Roman Ring with polished horn cattle R-RMC30A - knife
Roman Ring with polished horn cattle R-RMC30A - knife
Antique knife initially in use in the Roman countryside, and then in Rome at the time of the papal city. Often, the rustic character of duels, it was designed primarily as a weapon. The blade is made of carbon steel with locking blade. The cow horn handle. Variable length. These knives are made from "Conaz" only on demand, thereby making each one as unique.
Intended Use: Collection
Type of production: craft
Blade: carbon steel
Treatment Blade: -
Production Blade: Italy
Handle: Horn Cattle Etched
Blade length: 130mm.
Blade Thickness: 2.5mm.
Closed Length: 160mm.
Overall length: 290mm.
Balancing: -
Weight: 106g.
Closure: Without Rear Blade
Clip: -
Sheath: -
Notes: -R-RMC30A -
United - GH5027 Hibben Legacy Bowie knife
United - GH5027 Hibben Legacy Bowie knife -
Intended Use: Sport / Collection
Type of production: Industrial
Production Lama: China
Blade: 7Cr17MoV stainless steel
Treatment Blade: Mirror polished
Handle material: Micarta
Blade length: 145mm.
Blade thickness: 5mm.
Length closed: -
Total length: 305mm.
Thick when closed: -
Balance: -
Weight: 348g.
Closing: -
Clip: -
Sheath: Black leather
Packaging: Cardboard box with logos United Cutlery - Warranty
Notes: Design by Gil Hibben and Wesley HibbenGH5027 -
United - Legionnaire Bowie by Gil Hibben - GH5037 bowie knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Lama: China
Blade: 7Cr17MoV stainless steel
Treatment Blade: Mirror polished
Handle: Wood
Blade length: 240mm.
Blade thickness: 5mm.
Length closed: -
Total length: 380mm.
Thick when closed: -
Balance: -
Weight: 540g.
Closing: -
Clip: -
Sheath: Black leather
Packaging: Cardboard box with logos United Cutlery - Warranty
Notes: Design by Gil Hibben10040 -
Conaz Consigli Scarperia - Arbus knife - Arburese Corone Montone 20cm - 53017 - knife
Characteristic Sardinian knife, typical of the Arbus area; with blade with a characteristic bellied shape, very suitable for leather. Traditional shapes and fine finishes.
The shape reached today derives from ancient styles used in past times.
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 85mm.
Blade thickness: 2mm.
Length closed: 115mm.
Total length: 205mm.
Weight: 50g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53017M -
Fox/Combative Edge - M1 Plain - CED-01 - coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10 e titanio
Lunghezza lama: 95mm. filo liscio
Spessore lama: 4mm.
Lunghezza chiuso: 130mm.
Lunghezza totale: 225mm.
Spessore da chiuso senza clip: 10mm.
Bilanciatura: -
Peso: 152g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -7728 -
Fox/Combative Edge - Salus - FX-CED-M2 - coltello
Destinazione d'uso: Tattico/Militare
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: full tang, in acciaio inox N690Co
Trattamento Lama: Ti-Ni
Manicatura: G-10
Lunghezza lama: 150mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 275mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 304g.
Chiusura: -
Clip: -
Fodero: Kydex e Nylon
Confezione: Scatola di cartone con loghi Fox
Note:7743