Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Chris Reeve - Sable III Integral Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new, never used
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratoryIntended Use: Collecting/Hunting/Sporting
Production type: Midtech
Country of Production: USA
Blade: A2 55/57HRC steel
Blade Treatment: gunkote
Handle: A2 55/57HRC steel with alluminium screwed cap
Blade length: 108mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 203g.
Sheath: Black leather
Packaging: -
Notes: knife withdrawn from private collection like new, lacks packaging and certificatesCR-SA3-CP -
Laguiole En Aubrac - Hunteing knife - Ebony - L0514EBI - knife
These high quality knives, are handcrafted in the tradition of French Thiers cutlery.
This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.
The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.
The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly.
The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs.
The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.
Intended Use: Regional/Collection/Outdoor/Hunting
Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L0514EBI -
Laguiole - En Aubrac - Trappeur Olive knife - knife
Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.
Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:LEA-T-W -
Chris Reeve - Large Inkosi - Insingo Blade - knife
Intended Use: Collection / Sports
Blade: CPM-S35VN stainless steel 58/59 HRC
Country of Origin: USA
Finish: stonewashed
Handle: Titanium
Blade length: 92mm.
Blade Thickness: 3.56mm.
Closed Length: 123mm.
Overall length: 212mm.
Weight: 140g.
Lock: Frame Lock
Clip: Titanium
Packaging: cardboard box with CRK logos, microfiber cloth, guarantee certificates
Notes: -LIN-1022 -
Laguiole - En Aubrac - Trappeur Olive knife - knife
Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.
Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:L0514TOLI -
Chris Reeve - Professional Soldier by W. Harsey - Tanto - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1002 -
Chris Reeve - Professional Soldier by W. Harsey - Insingo - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1001 -
Chris Reeve - Professional Soldier by W. Harsey - Drop - 2017 Version
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1000 -
Chris Reeve - Large Inkosi - folding knife
Intended Use: Collection / Sports
Blade: CPM-S35VN stainless steel 58/59 HRC
Country of Origin: USA
Finish: stonewashed
Handle: Titanium
Blade length: 92mm.
Blade Thickness: 3.56mm.
Closed Length: 123mm.
Overall length: 212mm.
Weight: 140g.
Lock: Frame Lock
Clip: Titanium
Packaging: cardboard box with CRK logos, microfiber cloth, guarantee certificates
Notes: -LIN-1000 -
Chris Reeve - New Sebenza 25 - knife
Sebenza 25:
Making the Best Even Better
Virtually every year since the inception of the Sebenza in 1987 has seen small, incremental developments, improvements and changes. Celebrating the 25th anniversary of the Sebenza in 2012, Chris brought some new concepts to the Sebenza 25.
• Large Hollow Grind Technology—the first blade to feature this new grind that blends the best of hollow and flat grinds.
• Shaped phosphor bronze washer on the lock side brings additional stability to that side of the blade.
• One-eighth inch ceramic ball acts as the interface between the lock bar and the blade, and doubles to drop into the detent, ensuring the blade stays in place when closed.
• Larger perforations in the washers reduce friction, store more lubricant and offer space for small dirt particles to move away from the blade/washer interface, helping to prevent blade action from becoming “sticky”.
• 416 Heat treated stainless steel stop pin is interference fit into the lock side of the handle.
• Asymmetrical pattern thumb serrations on a curved thumb ramp of the blade give excellent purchase.
At 0.140” (3.56mm), the blade is more robust than previous Sebenza models.
SPECIFICATIONS:
Blade Material:
CPM S35VN Stainless Steel
Blade Hardness:
58-59 RC
Blade Length:
Large - 3.625" (92 mm)
Blade Thickness:
0.14" (3.56 mm)
Overall Length:
8.335" (212 mm)
Handle Length:
4.71" (147.64 mm)
Handle Material:
6Al4V Titanium
Handle Thickness:
0.150" (3.8 mm)
Weight:
5.2 oz. (145 g)
Fittings:
303 Stainless Steel
Double Thumblugs:
6Al4V Titanium
Pocket Clip:
6Al4V Titaniumsebenza25 -
Chris Reeve - Professional Soldier - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici/collezione made in USA Chris Reeve
Destinazione d'uso: Sportivo / Tattico
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 55/57HRC
Trattamento Lama: KG Gun-Kote
Manicatura: In acciaio inox CPM-S35VN 55/57HRC
Lunghezza lama: 86mm.
Spessore lama: 4.1mm.
Lunghezza chiuso: -
Lunghezza totale: 184mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 85g.
Chiusura: -
Clip: -
Fodero: in Kydex by Blade Tech
Confezione: scatola in cartone bianco con loghi Chris Reeve, Certificati di garanzia
Note: Design by Bill Harsey0030