Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.

Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -

Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.

Intended Use: Collection/Sportsman

Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpening

Timeless simplicity is the main reason why you will never get tired of your Z100.

In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: Aluminum 6061-T6
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: FrameLock
Clip: deep pocket, removable and reversible, flush stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife

Being reliable isn't easy.

If you want to be taken seriously, you have to perform over and over again. The new A200 was born to do just that; thanks to its lightweight yet durable construction, you'll almost forget you have it. Being fully ambidextrous and super safe at all times, the new A200 is the perfect EDC for your every day adventures.

Intended Use: EDC / Sporty

Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 60HRC
Blade Finish: Black DLC
Handle: G-10 with spacers and red anodized aluminum opening pin
Blade length: 88mm.
Blade thickness: 3mm.
Total length: 210mm.
Weight: 81g.
Closing System: Ambidextrous A-Lock.
Clip: deep pocket, removable and reversible, flush, in Black DLC stainless steel
Package: Cardboard box with ANV logos
Notes: -

How far can you go on the path of minimalism?

The elegance of a single piece of Sleipner steel, precision machined and ground to produce a reliable tool. The P100 was conceived as a staple of any personal EDC set where everything unnecessary has been removed. With its low weight and ultra-thin profile scabbard, the P100 can be exactly what you need at all times. Anytime, anywhere.

Intended use: hiking / light utility / neck knife

Production type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner 58HRC steel
Blade finish: Stonewashed
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 62g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos.
Notes: Possibility to use it as neck knife.

A simple knife that isn't afraid of rough treatment.

Sometimes you need to have a longer blade with you, whether you need to go fishing or make firewood. The P300 is a true universal workhorse that's always at your side thanks to its massive Sleipner steel blade with fantastic cutting performance. But a good tool also needs a reliable and secure handle and in our case this is guaranteed by a G10 composite handle with a rough finish and three massive screws that hold it all together for maximum performance.

Intended use: hiking / utility

Manufacturing Type: Industrial
Blade production: Czech Republic
Blade: full tang, in Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 270mm.
Weight: 255g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos
Notes: -

We don't know where your next expedition will take you, but one thing's for sure: there's nothing more important than reliable, quality gear. In designing our flagship P500, we combined the seemingly incompatible. We ground the high-quality Swedish Sleipner steel blade at two different angles. Near the handle is a high sharpness suitable for normal cutting and finer work, while the front has a very durable low, bellied sharpness that shifts the knife's center of gravity significantly toward the tip allowing you to use it on hardwoods and materials with great power. For safe and controlled work, the back of the "five hundred" handle also widens significantly which, in combination with the grippy G10 composite surface, forms a secure and comfortable grip. 

Intended use: hiking / utility

Type of production: Industrial
Blade production: Czech Republic
Blade: Full tang, made of Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 190mm.
Blade thickness: 5mm.
Total length: 330mm.
Weight: 377g.
Scabbard: Black leather
Package: Cardboard box with ANV logos
Notes: -

We developed the M311 SPELTER knife in collaboration with members of advanced aerial observation units, close protection teams and special air operations. During the development of the knife we focused on using their experience and needs. Thanks to this unique cooperation, we had the opportunity to truly verify the quality of the chosen materials, design and overall construction of the product. The knife has been tested for a long period in extreme environments and various climates, including the hot, dry and humid areas of Asia, as well as the icy areas beyond the polar circle.

Intended Use: tactical / military / collection

Type of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel Elmax 60HRC
Blade Finish: Black DLC
Handle: Micarta
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 275mm.
Weight: 286g.
Sheath: Kydex, thermoformed, with double MOLLE compatible loop.
Package: Cardboard box with ANV logos
Notes: -

Intended use: tactical / military / collection

Production type: Industrial
Blade production: Czech Republic
Blade: full tang, Sleipner steel 59HRC
Blade Finish: Black DLC
Handle: G-10
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 265mm.
Weight: 308g.
Sheath: Kydex, thermoformed, with double MOLLE compatible loop.
Package: Cardboard box with ANV logos
Notes: -

M73 Kontos incorporates all the basic components of Acta Non Verba's M-line knives. It has a carefully contoured full tang design and a lightweight handle for perfect balance. Its blade is made of Swedish Sleipner steel coated with Cerakote, with a 3D machined micarta handle. The M73 KONTOS is clearly recognizable by its hexagonal pommel, machined from an original track stop from a T-72M tank. It comes with a self-locking Kydex scabbard accompanied by a pair of spring compatible clips.

Intended use: tactical / military / collection

Manufacturing Type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner steel 58HRC
Blade Finish: Cerakote
Handle: Micarta
Blade length: 125mm.
Blade thickness: 3mm.
Total length: 265mm.
Weight: 228g.
Sheath: Kydex, thermoformed, with double MOLLE compatible loop.
Package: Cardboard box with ANV logos
Notes: The design of the knife is inspired by the T72M tank supplied to the former Czechoslovakian army in the 80's - The length of the blade has the same diameter as the caliber of the tank cannon - The hexagonal pommel of the knife is made using the original fasteners of the tracks of the T-72M tanks.

This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.

Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 028 - Date of production April 23, 2019

This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.

Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: Folder

Rockstead - About HPC - knife

With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: stainless Hitachi YXR7 to 64.8HRC coverage HPC 3micron - Hv1800
Handle material: Duralumin A2024 with anodized surface to HV400 and skin of Breed
Blade length: 82 mm.
Blade Thickness: 4 mm.
Overall length: 189 mm.
Weight: 100 g.
Lock: Liner Lock 402J2 steel at 52HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: aluminum
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 102g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 1039 - Date of production 31 May 2019