Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Viper - 2023 Titanium and Mother of Pearl Limited Edition Collection - Hug, Key, Twin - VCOL/2022M - knives
Precious Mother-of-Pearl Collection consisting of 3 knives: TWIN, KEY, HUG with titanium handle and mother-of-pearl insert. Rounded spring with handmade file work. Accompanied by individual leather liners.
Limited and numbered series of 200 sets with cylindrical wooden and plexiglass display stand.
HUG DATA SHEET
Type of production: Industrial, with handmade lima spring
Country of production: Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium GR5 and Mother of Pearl
Blade length: 71mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 184mm.
Thickness when closed: 14mm.
Weight: 75g.
Closure: Slipjoint
Clip: titanium
Notes: Design by Sacha Thiel
KEY DATA SHEET
Type of production: Industrial, with handcrafted file spring
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium GR5 and Mother of Pearl
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 185mm.
Thickness when closed:10.5mm.
Weight: 75g.
Closure: SlipJoint
Clip: -
Notes: Design by Jesper Voxnaes
TWIN DATA SHEET
Type of production: Industrial, with handmade file spring
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium GR5 and Mother of Pearl
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 176mm.
Thickness when closed: 10mm.
Weight: 77g.
Closure: Slipjoint
Clip: -
Notes: Design by Fabrizio SilvestrelliVCOL/2022M -
Citadel - Nordic hunter knife - 288 - craft knife
Citadel - Nordic
These handmade knives are distinguished by their original but functional line, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The knife is then polished and sharpened by hand on stone and finished in every single detail.Blade: DNH7 "Bruit de forge" selective hardening 40/60 HRC steel with file-worked spine
handle: In wood with brass guard
Blade length: 70 mm.
Handle length: 115 mm.
Blade thickness: 3.5 mm.
Total length: 195 mm.
Sheath: Handmade brown leather
Weight: 154 g.CI-NORDIC -
Citadel - Japanese Aikuchi No.1 Small - 502S - custom knife
These craftsmanships are distinguished by their classical lineage and their functional quality, which blends well with traditional production techniques and materials used. The blades are hardened to a hardness of about 40 HRC, after which they have been hammered by hand, the back and sides are clad with clay and the thread is retreaded to 60 HRC for excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.
Blade: high-carbon DNH7 steel with selective clay 40 / 60HRC clay and high degree of mirror polishing.
Hamon: Gunome style
Bo-Hi: absent
Total Length: 23.3cm.
Blade length: 11.8cm.
Blade thickness: 3.5mm.
Balance: on guard
Length Grip: 8.5cm.
Weight: 136g.
Saya: black lacquered wood with buffalo horn finishes
Tsuka-ito: Black cotton on the same (white skin) white
Sageo: absent
Fuchi and Kashira: in buffalo horn
Menuki: bronze
Habakia: Copper
Notes: Sold with silk sheath and cordura carrying case.3951 -
Citadel - Tanto Luxe Inciso - 130 - craft knife
These artisanal products stand out for their classic line and their functional quality, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.Blade: in DHN7 steel with high carbon content with selective clay / 40 / 60HRC tempering and high degree of polishing.
Hamon: Gunome style
Bo-Hi: absent
Total length: 38.5cm.
Blade length: 23.3cm.
Blade thickness: 6.5mm. / 3mm.
Balancing: Advanced 2.5cm from Tsuba
Handle Length: 9.5cm.
Tanto weight: 372g.
Weight with Saya: 488g.
Saya: black lacquered wood, drowned gold leaves and buffalo horn finishes
Tsuka-ito: beige cotton on the same white (breed leather)
Sageo: absent
Tsuba, Fuchi and Kashira: in burnished and finely engraved metal
Menuki, seppa, shitodome: bronze
Habaki: copper
Notes: The Tanto is sold with a silk sheath and carrying case cordura.Small technical glossary: Hamon: hardening line on the blade * Hi: deep groove in the blade, also called bloodsucker * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather braid wrapping the handle * Tsuba: guard * Drones: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which is tied the Sageo * Sori: curvature of the blade
CI-TA-B