Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Pattada - N690Co & G10 - PRIVATE COLLECTION - C204GP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionType of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC204GP-CP -
Boker Plus / Donges - Expert Fire Folder - Rescue Knife - 01DG007 - knife
Knives made in collaboration with Dönges are specialized tools for difficult and demanding rescue operations. What the products have in common are the red G10 handles with non-slip Dönges honeycomb structure, the incredibly tough and high-performance D2 steel blades and the presence of a glass breaker.
The Expert Fire Folder has two rescue blades that open in opposite directions. While the spear point blade is suitable for universal cutting tasks, the rescue blade has several multifunctional cutting surfaces. It has a serrated edge for ropes and a lever point with integrated nail extractor. A belt cutter is located directly behind the tip. Finally, the multifunctional blade has a bottle opener for a well-deserved break after use.
Intended Use: Emergency/RescueProduction type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: stainless steel and G10 folders
Blade length: 100mm.
Blade thickness: 3.2mm.
Total length: 235mm.
Weight: 315g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Donger logos, zippered nylon pouch
Notes: tungsten carbide rear glass breaker - Second emergency lever lock blade with crowbar, belt cutter and bottle opener - Carson Flipper type opening systemBO-01DG007 -
Boker Plus / Donges - Professional Fire Folder - Rescue Knife - 01DG004 - Knife
Knives made in collaboration with Dönges are specialized tools for difficult and demanding rescue operations. What the products have in common are the red G10 handles with non-slip Dönges honeycomb structure, the incredibly tough and high-performance D2 steel blades and the presence of a glass breaker. Both knives feature multiple cutting edges uncompromisingly designed to cut through ropes, harnesses and clothing of injured people.
This model, designed specifically for firefighters, features a universal spear point blade that can be opened with either the flipper or thumb pin system; there is also the multi-position clip in addition to the belt cutter that can be retracted inside the handle.
Intended Use: Emergency/Rescue
Production Type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Teflon coated
Handle: stainless steel and G10 folders
Blade length: 116mm.
Blade thickness: 3.2mm.
Total length: 271mm.
Weight: 254g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Donger logos, zippered nylon pouch
Notes: Rear tungsten carbide glass breaker - Rear removable belt cutter - Carson Flipper type opening system on ball bearingsBO-01DG004 -
Giant Mouse - ACE Sonoma V2 - Elmax & Green Canvas Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by CarryologyGM-ACESO-CP -
Boker Plus - M.E.R.K. 1 by Vaeringi Design - D2 & Black G10 - 01BO552 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: stainless steel and G10 folders
Blade length: 93mm.
Blade thickness: 3.2mm.
Total length: 218mm.
Weight: 159g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: Design by Vaeringi - tungsten carbide backstop - ball bearing opening systemBO-01BO552 -
MKM - Vincent by Vox - Top Shield N690Co & Black G10 - VCN-GBB - knife
The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is BOHLER N690Co with black Black Top Shield cover and G10 handle for the best possible grip.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: G10, with embedded stainless steel liners and anodized aluminum spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 100g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX VoxnaesMK-VCN-GBB -
Viper - Keeper 2 by Fabrizio Silvestrelli - Elmax & Damascus Carbon Fiber - V6000FCDL - knife
Intended Use: Tactical/Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel Elmax SuperClean 59/61HRC
Blade Finish: Satin finish
Handle: carbon fiber and stainless steel damascus effect handle, 1.4116 stainless steel liners and GR2 titanium spacer
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 210mm.
Weight: 145g.
Closure: liner lock with integrated Smart Automatic Safe Lock System.
Clip: stainless steel 1.4116, removable and reversible
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio "Silvester" SilvestrelliV6000FCLD -
Boker - 1969 Camaro Z28 Damast by Tommaso Rumici - 111101DAM - knife
Designed by Tommaso Rumici, the knife is "muscular" and unique, combining the Camaro Z28's distinctive features of shape and strength. The elegant Damascus blade, hand forged by Chad Nichols with 80 layers in the "Tread" pattern, is reminiscent of the muscle car's sloping hood. To that end, parts from the upper suspension arm of the original vintage Camaros were used to forge the blade.
Based on an analysis of the color of an original model, the "Le Mans Blue" lacquer finish was created especially for Boker for the aluminum handle, which interprets the body lines in a nostalgic way and is enriched with exciting details. The notchback, small rear spoiler and slat-shaped air intakes on the rear fenders have been beautifully integrated into the knife. The blade axle screw is lovingly inspired by the rims often used on muscle cars, while the straight-line stainless steel clip, milled from billet, is reminiscent of chrome door handles.
Intended Use: Sporting / Collection
Type of production: Industrial
Country of manufacture: Germany - Solingen
Blade: Handcrafted Damascus "Tred" by Chad Nichols made from the suspension of old Camaros
Handle: Aluminum painted "Le Mans Blue" metallic color
Blade length: 80mm.
Blade thickness: 3.6mm.
Total length: 186mm.
Weight: 99g.
Closure: Liner Lock
Clip: stainless steel
Packaging: Display case with Boker logos, fabric knife case, warranty certificates
Notes: Limited edition numbered on the back of the knifeBO-111101DAM -
BlackFox - Artia by Grigorii Matveev - D2 Green G-10 - BF-765OD - knife
Intended Use: EDC / Sporting
Type of production: Industrial
Country of Production: China
Blade: tool steel D2 at 59/61HRC
Blade treatment: Stonewashed
Handle: G-10
Blade length: 93mm.
Blade thickness: 3.4mm.
Total length: 203mm.
Weight: 100g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-765OD -
BlackFox - Acutus by Grigorii Matveev - D2 Black G-10 - BF-764BB - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: D2 tool steel at 59/61HRC
Blade treatment: Black PTFE
Handle: G-10
Blade length: 90mm.
Blade thickness: 3.4mm.
Total length: 195mm.
Weight: 115g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-764BB -
BlackFox - Nix by Grigorii Matveev - D2 Orange G-10 - BF-763OR - couteau
Usage prévu : EDC / Sport
Type de production : Industriel
Pays de production : Chine
Lame : Acier à outils D2 à 59/61HRC
Traitement de la lame : PTFE noir
Manche : G-10
Longueur de la lame : 55mm.
Epaisseur de la lame : 3.5mm.
Longueur totale : 132mm.
Poids : 90g.
Clip : Acier inoxydable, amovible et réversible
Fermeture : Liner Lock
Emballage : boîte en carton avec les logos BlackFox
Notes : Design par Grigorii MatveevBF-763OR -
BlackFox - Nix by Grigorii Matveev - D2 Brown Micarta - BF-763 - knife
Intended Use: EDC / Sporty
Type of production: Industrial
Country of Production: China
Blade: D2 tool steel at 59/61HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade Length: 55mm.
Blade thickness: 3.5mm.
Total length: 132mm.
Weight: 90g.
Clip: stainless steel, removable and reversible
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: Design by Grigorii MatveevBF-763 -
BlackFox - Folding Rescue Knife - Red - BF-117 - knife
Intended Use: EDC / Rescue
Production type: Industrial
Country of manufacture: China
Blade: Steel 440 HRC 55-57
Blade treatment: satin finish
Handle: Aluminium T6-6082 anodised red
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 208mm.
Weight: 169g. (204g. including sheath)
Clip: -
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: glass breaker - 7, 8 and 10 mm bolt insert - oxygen cylinder opening insert - nylon sheathBF-117 -
BlackFox - Folding Rescue Knife - Black - BF-115 - knife
Intended Use: EDC / Rescue
Production type: Industrial
Country of manufacture: China
Blade: Steel 440 HRC 55-57
Blade treatment: varnishing
Handle: G10
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 208mm.
Weight: 162g. (197g. including scabbard)
Clip: -
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: glass breaker - 7, 8 and 10 mm bolt insert - oxygen cylinder opening insert - nylon sheathBF-115 -
Master of Defense - Hornet Black Serrated - James Keating Design - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory
Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logosMOD-HORNET-CP -
Boker Plus - Kalashnikov AK101 2.0 Flipper - 01KAL105N - folding knife
ntended Use: Tactical / Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Teflon coated
Handle: Aluminium
Blade length: 120mm.
Blade thickness: 3.5mm.
Total length: 250mm.
Weight: 202g.
Clip: Stainless steel, removable and reversible
Closure: liner lock
Packaging: cardboard box with Kalashnikov logos
Notes: -BO-01KAL105N -
Boker Arbolito - Folder Nahuel Guayacan Knife - 01BA004 - Knife
Nahuel means jaguar in the Mapuche language, the indigenous people of Argentina and Chile. Boker Arbolito's new folding knife design is equally robust and elegant. The main feature of this handle with linerlock block is the presence of light Guyacan ebony on both sides.
This gives the knife a nice feel and a warm look. Another eye-catching detail is the spacer, which is also made in Guyacan. The Böhler N678 stainless steel teardrop blade is easy to open via a flipper, which offers reliable finger protection when folded.
A deep pocket clip embedded in the wood allows for fold-down / right-handed carry.
Intended use: Hunting / Utility
Type of production: Industrial
Country of production: Argentina
Blade: N678Co 58HRC stainless steel ful tang
Blade finish: Satin
Handle: ebony
Blade length: 82mm.
Blade thickness: 3.38mm.
Total length: 200mm.
Weight: 151g.
Sheath: reversible clip
Packaging: cardboard box with Boker logos
Note: -BO-01BA004 -
Boker Plus - Kwaiken Push Button Flipper by Lucas Burnley - 01BO619 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: stainless steel CPM-S-35VN
Blade treatment: satin finish
Handle: steel liners and titanium grips
Blade length: 77mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 116g.
Clip: removable stainless steel
Closure: button lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley - manual opening system via carson flipper system on ball bearingsBO-01BO619 -
Boker Plus - Aluma Flipper Folder by E. Manasherov - 01BO463 - knife
Intended Use: Sporting/collection
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade finish: stonewashed
Handle: aluminum with wood insert
Blade length: 91mm.
Blade thickness: 3.6mm.
Total length: 220mm.
Weight: 123g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered pouch, warranty certificate
Notes: Design by Eran ManasherovBO-01BO463 -
Acta Non Verba - Z100 Flipper - Stonewashed Sleipner - Coyote G-10 - knife
Timeless simplicity is the main reason why you will never get tired of your Z100.
In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.
Intended Use: EDC / SportingProduction type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush in stainless steel
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.ANV-Z100-012 -
Boker Plus - Papillon Trainer Bali - 01BO352 - training knife
Intended Use: Training
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 420
Blade Finish: Stonewashed
Handle: Stainless steel
Blade Length: 114mm.
Blade thickness: 3.7mm.
Length closed: 138mm.
Total length: 252mm.
Weight: 124g.
Closure: T-latch
Clip: -
Package: Cardboard box with Boker Plus logos
Notes: -BO-01BO352 -
Boker Plus - Connector G10 Knife - 01BO354 - folding knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Total length: 176mm.
Weight: 78g.
Clip: removable steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: opening by Carson Flipper system on ball bearingsBO-01BO354 -
CRKT - Carson M16-13DSFG Tan Special Forces - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemM16-13DSFG-CP -
Fallkniven - PXLey Folding Knife - Elmax - Elforyn - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Elforyn with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steelF-PXLey -
Fallkniven - PXLbl Folding Knife - Elmax - Black Micarta - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steelF-PXLbm -
Boker Plus - Gulo Pro Marble Carbon Fiber - 01BO177 - folding knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: Carbon Fiber, Titanium
Blade length: 84mm.
Blade thickness: 3.5mm.
Total length: 192mm.
Weight: 148g.
Clip: in steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Steve KellyBO-01BO177 -
Boker Plus - Golem knife - 01BO192 - knife
Intended use: Sports / collection
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: stonewash
Handle: in G10
Blade length: 89mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 148g.
Clip: in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: pinball opening system on ball bearingsBO-01BO192 -
Boker Plus - Kwaiken Mini Flipper G10 by Lucas Burnley - 01BO268 - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: Stainless steel and G10
Blade length: 78mm.
Blade thickness: 3.2mm.
Total length: 184mm.
Weight: 81g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley - ball bearing flipper opening systemBO-01BO268 -
Boker Plus - Icepick Dagger by Chuck Gedraitis - 01BO199 - coltello
Destinazione d'uso: Sportivo / Collezione
Tipo di produzione: Industriale
Paese di produzione: Taiwan
Lama: in acciaio inox VG-10
Trattamento lama: satinatura
Manicatura: in fibra di carbonio con cartella interna in acciaio inox
Lunghezza lama: 82mm.
Spessore lama: 3.4mm.
Lunghezza totale: 182mm.
Peso: 58g.
Clip: in acciaio inox
Chiusura: liner lock
Confezione: scatola di cartone con loghi Boker Plus, astuccio in nylon con zip
Note: Design by Chuck GedraitisBO-01BO199 -
Boker Plus - Kwaiken Stubby Titanium by Lucas Burnley - 01BO226 - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S-35VN stainless steel
Blade treatment: stonewash
Handle: steel liners and titanium grips
Blade length: 54mm.
Blade thickness: 3.2mm.
Total length: 138mm.
Weight: 91g.
Clip: in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley - IKBS opening system on ball bearingsBO-01BO226 -
CRKT - Piet by Vox - 5390 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass with anodized titanium spacer
Blade length: 68mm.
Blade thickness: 3.3mm.
Length closed: 95mm.
Total length: 164mm.
Weight: 71g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5390 -
MKM - Clap by Bob Terzuola - titanium and G10 - MKLS01-GTBK - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: black G10 grips and titanium braces
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-GTBK -
Fox - Tur Black by Vox - FX-528B - Knife
Intended use: Sports / Tactical
Type of production: Industrial
Production Country: Italy
Blade: stainless steel Elmax 59 / 61HRC
Blade treatment: PVD
Handle: Carbon fiber with titanium spacer
Blade length: 75mm.
Blade thickness: 3.5mm.
Closed Length: 103m.
Overall length: 178mm.
Thick when closed: -
Weight: 95g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: Cardboard box with logos Fox Knives
Notes: Design by Jesper VoxnaesFX-528B -
Boker Plus - Caracal by Boris Manasherov - 01BO771 - folding knife
Intended use: Tactical / Sports
Type of production: Industrial
Production Country: Taiwan
Blade: Steel D2
Blade treatment: stonewashed
Handle: steel liners and G10 grips
Blade length: 87mm.
Blade thickness: 3.5mm.
Overall length: 213mm.
Weight: 157g.
Clips: stainless steel, type deep pocket
Lock: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Boris Manasherov - opening system Carson FlipperBO-01BO771 -
Fox - FX-599TK G10 Karambit Training Orange - Knife Training
Fox - FX-599TK G10 Karambit Training Orange - Knife Training
Blade: rounded and not sharp, stainless steel 420
Handle: G10 Orange
Ring: Aluminium Black
Lock: Liner Lock
Length closed: 120 mm.
Blade length: 60 mm.
Blade thickness: 3.5 mm
Overall length: 175 mm
Weight: 102 g.
Clip: Stainless SteelFX-599TK -
CRKT - M16-04Z by Kit Carson - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 94mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Total length: 230mm.
Thick when closed: 17mm.
Balance: -
Weight: 182g.
Lock: Liner Lock locking system with self-LAWKS
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: -CM16-04Z -
CRKT - Carson M16-14SFG - Special Forces Big Dog G10 knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr14MoV to 58-60 HRC
Blade treatment: Ti-Ni
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 17mm.
Balancing: -
Weight: 180g.
Closure: Liner Lock with auto-LAWKS locking system
Clip: stainless steel
Sheath: -
Packaging: cardboard box with CRKT logos
Note: -CM16-14SFG -
Fox - A.L.S.R. Green G10 Rescue Knife - FX-447COD - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: in good condition, with a few small marks that do not affect its use.
* Commercially available: discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Some non-removable adhesive residue.
* Marks on handle: Small signs of wear on the clip's paintwork.
* Box: Absent
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratoryIntended Use: Emergency / Rescue / Multipurpose Tactical
Country of Production: Italy
Blade: N690Co stainless steel with DLC treatment
Handle: G10
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 150mm.
Total length: 240mm.
Weight: 178g.
Closure: Liner Lock
Clip: teflonized steel black reversible
Sheath: cordura, belt-mounted
Notes: emergency rear belt cutter, glass breaker on tangFX-447ALSR-CP -
Sig Sauer - SigTac G-10 knives - FX3PB - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory
Intended use: tactical/militaryBlade: N690Co Green MILSPEC stainless steel partially serrated
Blade production in Italy
Handle: G-10
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed length: 120mm.
Total length: 215mm.
Balancing: -
Weight: 155g.
Closure: Liner Lock
Clip: reversible and removable in stainless steel
Sheath: -
Note:AP-FX3PB€87.70Only 1 left -
Spyderco - Military Black Plain - C36GPBK - knife
Intended Use: Sporting/Tactical
Production type: Industrial
Blade production: U.S.A.
Blade: Stainless steel CPM 30SV
Blade Treatment: BodyCote black
Handle: G10
Blade length: 102mm.
Blade thickness: 3.3mm.
Length closed 140mm.
Total length: 241mm.
Thickness when closed: 15mm.
Balance: -
Weight: 122g.
Closure: Liner Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: cardboard box with Spyderco logos
Notes: -C36GPBK -
Spyderco - Military Plain knife - C36GPE knife
Intended use: Sport / Tactical
Type of production: Industrial
Blade Production: U.S.A.
Blade: CPM 30SV stainless steel
Blade treatment: -
Handle: G10
Blade length: 102mm.
Blade thickness: 3.3mm.
Closed length 140mm.
Total length: 241mm.
Closed thickness: 15mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: removable, in stainless steel
Scabbard: -
Packaging: cardboard box with Spyderco logos
Note: -3720PS -
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.
Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HIMHDLC-CP -
Viper - Keeper 2 by Fabrizio Silvestrelli - Elmax & Green Canvas Micarta - V6000CG - knife
Intended Use: Tactical/Sporting
Production type: Industrial
Country of Production: Italy
Blade: Elmax SuperClean 59/61HRC stainless steel
Blade Finish: Stonewashed
Handle: canvas micarta handle, 1.4116 stainless steel liners and GR2 titanium spacer
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 210mm.
Weight: 145g.
Closure: liner lock with integrated Smart Automatic Safe Lock System.
Clip: stainless steel 1.4116, removable and reversible
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio "Silvester" SilvestrelliV6000CG -
Gerber - Applegate Fairbairn Knife - PRIVATE COLLECTION - 5780 - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Conditions: in excellent conditions
Available in the market: NO
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: NO, without original box
Checked and Certified by our internal laboratory
Intended use: Tactical/MilitaryBlade: in 154CM stainless steel
Blade Production: USA
Handle: Zytel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balancing: -
Weight: 113g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: without boxAP-GE-APP -
CRKT - Carson knife M21-14SFG - Special Forces - knife
Intended use: Tactical/Military
Blade: AUS-8 56/58HRC stainless steel
Taiwan blade production
Handle: Aluminum
Blade length: 100mm.
Blade thickness: 3.5mm.
Closed length: 135mm.
Total length: 235mm.
Balancing: -
Weight: 155g.
Closure: Liner Lock
Clip: removable and reversible in stainless steel
Scabbard: -
Notes: design by Carson - AutoLAWKS safety catchM21-14SFG -
Cold Steel - Thompson Voyager - Signature Limited Edition - 29UXV - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
SERIAL NUMBER 0231
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Limited series, discontinued
* Sharpening: Factory
* Marks on blade: Slight, uneven treatment in places (factory, not due to wear)
* Marks on handle: No
* Box: Present and original, WITH AUTOGRAPH SIGNATURE OF LYNN THOMPSON
* Scabbard: Not present
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratoryIntended use: Sporting/EDC
Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel Carpenter CTS XHP Alloy 59/60HRC
Blade treatment: DLC
Handle: Griv-Ex
Blade length: 135mm.
Blade thickness: 3.6mm.
Length closed: 170mm.
Total length: 304mm.
Weight: 208g.
Closure: Back Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition (serial no. 0231) with signature of "Lynn C. Thompson" laser engraved on the blade and in pen on the packagingCS29UXV -
Master of Defense - Point Man Plain Edge - Trident Utility knife - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Rare model produced by Master of Defense around late 90s/early 00s and designed by James "Patches" Watson - Excellent condition. Never resharpened - No original box - Checked and certified by our workshop.
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM black
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed: 112mm
Total length: 200mm.
Thickness when closed: 13mm
Weight: 116g.
Closure: Liner Lock
Clip: removable, stainless steel
Notes: knife withdrawn from private collection in excellent conditionMOD-PMPE-CP -
Acta Non Verba - Z200 - Stonewashed Sleipner - Olive G-10 - knife
We always prioritize reliability and ease of use.
Its light weight and deep carry clip means you'll always have the Z200 by your side. If you prefer a controlled two-handed opening the Z200 is made for you. We milled a groove into the Sleipner steel blade that allows for easy and discreet opening.
Intended Use: EDC / SportyProduction type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 102g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush mounted, stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: At the base of the blade groove there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.ANV-Z200-009 -
Acta Non Verba - Z100 Flipper - Black DLC Sleipner - Olive G-10 - knife
Timeless simplicity is the main reason why you will never get tired of your Z100.
In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Black DLC
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush stainless steel with Black DLC treatment
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knifeANV-Z100-024 -
Acta Non Verba - Z400 - Black DLC Sleipner - Olive G-10 - knife
Confident elegance complemented by aristocratic lines gives the Z400 its well-deserved dominance over the rest of our folding knives.
A dagger-style, single-edged spear point blade made from Sleipner steel and equipped with a double guard that allows for an aggressive opening at the edge of the pocket when drawing or the ability to use it as a flipper system. Rounding out the package is an extremely durable, lightweight handle made of G10 composite with a secure liner lock and a deep pocket clip. All of this is designed in combination with a sense of elegance and simplicity. This is the Z400.
Intended use: EDC / SportingProduction Type: Industrial
Country of Production: Czech Republic
Blade: Sleipner 58HRC steel
Blade Finish: Black DLC
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total length: 230mm.
Weight: 110g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush, in Black DLC stainless steel
Package: Cardboard box with ANV logos
Notes: -ANV-Z400-008 -
Acta Non Verba - Z400 - Stonewashed Sleipner - Olive G-10 - knife
Confident elegance complemented by aristocratic lines gives the Z400 its well-deserved dominance over the rest of our folding knives.
A dagger-style, single-edged spear point blade made from Sleipner steel and equipped with a double guard that allows for an aggressive opening at the edge of the pocket when drawing or the ability to use it as a flipper system. Rounding things out is an extremely durable, lightweight handle made of G10 composite with a secure liner lock and a deep pocket clip. All of this is designed in combination with a sense of elegance and simplicity. This is the Z400.
Intended use: EDC / SportingProduction Type: Industrial
Country of Production: Czech Republic
Blade: Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total length: 230mm.
Weight: 110g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush mounted
Package: Cardboard box with ANV logos
Notes: -ANV-Z400-006 -
Master of Defense - Tempest knife SW by Michael Janich Design - PRIVATE COLLECTION - folding knife
Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2001 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.
Tactical / EDC knife manufactured in the late 1990s and designed by martial arts expert Michael Janich,
Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
The only copy at our disposal, without box, very rare and out of production for many years.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel
Handle: Aviation aluminum with Kraton anti-slip inserts
Blade length: 86mm.
Blade thickness: 3.5mm.
Closed length: 112mm
Total length: 200mm.
Thick when closed: 13mm
Weight: 120g.
Closure: Liner Lock
Clip: removable, in stainless steel
Packaging:MOD-TEMSW-CP -
Gerber - Spectre knife - 154cm - 06900 - PRIVATE COLLECTION - knife
Rare model produced by Gerber until 2003 - Knife taken from private collection - Overall in excellent condition, complete with original box and certificates - Checked, certified by our internal laboratory Coltelleria Collini.
Intended use: Tactical/Military
Blade: Stainless steel 154CM
Blade production USA
Handle: G10 with titanium folders
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 200mm.
Balance: -
Weight: 105g.
Closure: Liner Lock
Clip: Steel
Scabbard: -
Notes: -AP-06900 -
Spyderco - Military - Natural G-10 & CPM-M4 Black DLC - Exclusive Edition - C36GM4BK - Knife
Intended Use: Collection / Tactical
Production Type: Industrial
Country of Production: USA
Blade: Carbon steel CPM-M4
Blade Finish: Black DLC
Handle: Natural G-10
Blade Length: 102mm.
Blade thickness: 3.3mm.
Length closed 140mm.
Total lenght: 241mm.
Thickness when closed: 15mm.
Weight: 122g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: limited edition made in February 2019 exclusively for a US retailer - discontinued, sold out and unobtainable - Direct link to manufacturer's datasheet: https://www.spyderco.com/catalog/details/C36GM4BK/1210C36GM4BK -
Boker Plus - Warbird Flipper by Boris Manasherov - 01BO754 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in D2 steel
Blade treatment: stonewash
Handle: G10
Blade length: 94mm.
Blade thickness: 3.5mm.
Total length: 225mm.
Weight: 132g.
Clip: stainless steel, deep pocket type, removable and reversible
Closure: SubFrame Lock in stainless steel
Packaging: cardboard box with Boker Plus logos
Notes: Design by Boris Manasherov - Carson Flipper opening system with movement on ball bearingsBO-01BO754 -
Fox - Tur by Vox - Clip Point Black G10 - FX-523B - Knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 59HRC
Blade finish: Satin finish
Handle: G10 with stainless steel internal folders and G10 spacer
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 103mm.
Total length: 178mm.
Thick when closed: 14.2mm.
Weight: 95g.
Closure: Liner Lock
Clip: stainless steel, machined from solid
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-523B -
Cold Steel - Crawford Model 1 Flipper - 20MWC - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Taiwan
Blade: 4033 stainless steel
Blade treatment: Satin finish
Handle: Zy-Ex
Blade length: 92mm.
Blade thickness: 3.3mm.
Length closed: 122mm.
Total length: 212mm.
Thick when closed: 14mm.
Weight: 120g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: stainless steel, removable
Packaging: cardboard box with Cold Steel logos
Notes: opening system by carson flipper system - Design by Wes CrawfordCS20MWC -
Boker Plus - Toro Karambit by Boris Manasherov - 01BO758 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in D2 steel
Blade treatment: stonewashed
Handle: steel liners and G10 grips
Blade length: 79mm.
Blade thickness: 3.5mm.
Total length: 200mm.
Weight: 156g.
Clip: stainless steel, removable and reversible
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Boris Manasherov - opening system through Carson Flipper system on ball bearings - opening system similar to Emerson WaveBO-01BO758 -
Boker Plus - Ocelot Karambit by Boris Manasherov - 01BO757 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in D2 steel
Blade treatment: black coating
Handle: steel liners and G10 grips
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 190mm.
Weight: 179g.
Clip: stainless steel, removable and reversible
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Boris Manasherov - opening system through Carson Flipper system on ball bearings - opening system similar to Emerson WaveBO-01BO757 -
Fox - Ziggy Folder by Jens Anso - Blackwash Carbon Fiber - FX-308CFB - knife
Destination of use: sports
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: Blackwash
Handle: Carbon Fiber
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 14.5mm
Weight: 101g.
Closure: LinerLock
Clip: stainless steel, removable
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Jens AnsoFX-308CFB -
Fox - Ziggy Folder by Jens Anso - Carbon Fiber - FX-308CF - knife
Destination of use: sports
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: satin finish
Handle: Carbon Fiber
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 14.5mm
Weight: 101g.
Closure: LinerLock
Clip: stainless steel, removable
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Jens AnsoFX-308CF -
Fox - Ziggy Folder by Jens Anso - Ziricote - FX-308ZW - knife
Destination of use: sports
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: satin finish
Handle: Ziricote wood with stainless steel liners
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 14.5mm
Weight: 106g.
Closure: LinerLock
Clip: stainless steel, removable
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Jens AnsoFX-308ZW -
MKM - Clap by Bob Terzuola - olive wood - MK-LS01-O - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: olive wood grips
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 115g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-O -
MKM - Clap by Bob Terzuola - titanium and Santos wood - MKLS01-ST - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: Santos wood grips and titanium plates
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-ST -
MKM - Clap by Bob Terzuola - carbon fiber - MK-LS01-C - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: carbon fiber grips
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 107g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-C -
Maserin - Pitbull - Silver - Design by Sergio Consoli - 404/A - knife
Purpose of use: Sportsman
Type of production: industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Stonewashed
Handle: Aluminum
Blade Length: 95mm.
Blade thickness: 3.5mm.
Closed length: 133mm.
Total length: 225 mm.
Closed thickness: 13mm.
Weight: 158g.
Opening: Carson Flipper system
Washers: Steel, ball bearings
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: cordura
Packing: Cardboard box with Maserin logos
Notes: Skull Crasher on the Shank - Design by Sergio ConsoliMA-404A -
Maserin - Pitbull - Blue - Design by Sergio Consoli - 404/B - knife
Purpose of use: Sportsman
Type of production: industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Stonewashed
Handle: Aluminum
Blade Length: 95mm.
Blade thickness: 3.5mm.
Closed length: 133mm.
Total length: 225 mm.
Closed thickness: 13mm.
Weight: 158g.
Opening: Carson Flipper system
Washers: Steel, ball bearings
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: cordura
Packing: Cardboard box with Maserin logos
Notes: Skull Crasher on the Shank - Design by Sergio ConsoliM-404B -
Maserin - Pitbull - Black - Design by Sergio Consoli - 404/N - knife
Purpose of use: Sportsman
Type of production: industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Stonewashed
Handle: Aluminum
Blade Length: 95mm.
Blade thickness: 3.5mm.
Closed length: 133mm.
Total length: 225 mm.
Closed thickness: 13mm.
Weight: 158g.
Opening: Carson Flipper system
Washers: Steel, ball bearings
Locking system: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: cordura
Packing: Cardboard box with Maserin logos
Notes: Skull Crasher on the Shank - Design by Sergio ConsoliM-404N -
Rockstead - TEI DLC - 65hrc - knife collection
This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.
Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: FolderRO-TEI