Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Officially licensed Hollywood Collectibles reproduction of the knife used in the Rambo III film

Intended use: Survival / Collection

Blade: 420J2 stainless steel
Country of production China
Handle: in wood wood, with guard and knob in stainless steel
Blade length: 320mm.
Blade thickness: 5.5mm.
Total length: 455mm.
Balancing: advanced
Weight: 922g.
Sheath: leather
Notes: Official reproduction under cinema license
Limited Edition: autographed blade and scabbard "Silvester Stallone", limited and numbered edition made in 10,000 copies

Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.

This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.

Intended use: regional/collectible

Type of production: handcrafted
Blade: stainless steel Sandvik 12C27
Country of manufacture: France
Handle: ebony wood with mammoth fossil ivory insert
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -

Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw
Handle: Micarta
Blade length: 135mm.
Blade thickness: 5.5mm.
Total length: 250mm.
Balancing: advanced
Weight: 377g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased from Lorenzi's cutlery shop in Milan, via Monte Napoleone, presumably in the 1980s.
* Condition: In good condition
* Commercially available: the craftsman long ago stopped making knives.
* Sharpening: Factory original, can be improved, with some cosmetic abrasion
* Marks on blade: Small marks and slight hairlines also on the through-guard.
* Marks on handle: A few small marks.
* Packaging: absent
* Scabbard: Leather, handcrafted, original, stamped "Coltelleria Lorenzi," with marks given by use and time
* Manuals, Certificates and Warranties: absent.
* Checked and Certified by our in-house laboratory

Intended use: collection/tactical

Type of production: handcrafted
Country of manufacture: USA
Blade: full tang stainless steel, steel composition not stated (presumably RWL34 or 440C)
Blade finish: mirror polish
Handle: nickel silver through-guard and brown micarta grips, with red spacers
Blade length: 97mm.
Blade thickness: 4mm.
Total length: 202mm.
Weight: 97g.
Sheath: handcrafted, leather, with stainless steel back clip
Packaging: -
Notes: Specimen presumably from the 1980s, previously purchased knife, from a private collection

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Good
* Commercially available No
* Sharpening: Original
* Marks on the blade: Some scratches on the pommel, blade and guard in very good condition
* Marks on handle: Some assembly inaccuracies near the pommel, adhesive residues
* Packaging: NO
* Scabbard: Leather, handcrafted, original with some marks due to age and storage
* Manuals, Certificates and Warranties: YES
* Checked and certified by our in-house laboratory

Knife handcrafted by Master C.IC. (Corporazione Italiana Coltellinai - Italian Knife-makers Guild) Livio Montagna. Reproduction of one of the various versions of the Arkansas Toothpick, legendary frontier knife of the American 1800s. Famous, often infamous, it generally has a 30 to 50 cm blade, rather narrow and sometimes symmetrical, dagger-style. Used mainly for hunting and personal defence.

Livio Montagna's version is aesthetically very similar to the Toothpick used in Expandables 2.

The knife is distinguished by an excellent overall balance, allowing control and precision in use. The finish is of a good standard.

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: hardened 440C steel at 58/59 HRC
Blade finish: satin finish
Handle: Ebony - 416 stainless steel guard and pommel
Blade length: 305mm.
Blade thickness: 6mm.
Total length: 445mm.
Weight: 722g. (960g. including scabbard)
Sheath: Handcrafted, leather, hand-stitched
Packaging: NO
Notes: -

The Wander Tactical Uro Saw knife is an extremely robust and versatile survival knife. The blade is made of D2 steel, which ensures a long life and good resistance to wear and corrosion. The length of the blade is approximately 16 cm and has a serration on the top

The handle of the knife is made of micarta, a resistant and non-slip material that guarantees a secure grip even in humid or sweaty conditions. The length of the handle is approximately 13cm and features an ergonomic design, making it very comfortable to hold even for extended periods.

The Uro Saw knife comes with a Kydex sheath, which protects and keeps it safe during transport. Furthermore, the scabbard can be easily attached to a belt or trousers thanks to its quick release system.

In summary, the Wander Tactical Uro Saw knife is a great choice for those looking for an extremely robust and versatile survival knife, very interesting for camping, hiking and survivalism enthusiasts.

Intended use: Utility / Collection

Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: Marble
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 295mm.
Balancing: advanced
Weight: 430g.
Sheath: in thermoformed kydex, with double belt loop, M.O.L.L.E. compatible
Packaging: without packaging, accompanied by certificate of authenticity, version with hallmark with WT and DP marks
Notes: Each knife is unique and made entirely by hand

The Wander Tactical Lynx knife is an excellent option for anyone looking for a robust and reliable knife. The blade is made of D2 steel, which offers good resistance to wear and corrosion. The length of the blade is approximately 10cm and has a clip point shape, making it ideal for many outdoor activities.

The handle of the knife is made of micarta, a resistant and non-slip material that offers excellent grip even in humid or sweaty conditions. The length of the handle is approximately 12cm which gives a good balance to the knife, making it easy to handle and control.

The Lynx knife comes with a Kydex sheath, which protects and keeps it safe during transport. In addition, the cover can be easily attached to a belt or trousers thanks to its quick fastening system.

Overall, the Wander Tactical Lynx knife is an excellent choice for anyone looking for a reliable and durable knife for outdoor activities. With its sturdy blade, non-slip handle and Kydex sheath, the Lynx knife is a very attractive option for hikers, campers and outdoor enthusiasts.

Intended use: utility / bushcraft

Type of Production: Artisanal
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backwards
Weight: 260g.
Sheath: kydex
Packaging: -
Notes: Each knife is unique and handcrafted

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, presumably from the late 1970s/early 1980s.
* Condition: In very good condition
* Commercially available On order, with waiting list.
* Sharpening: Factory original, can be improved.
* Marks on blade: Small horizontal marks due to insertion and removal from scabbard.
* Marks on handle: A few small marks on aluminum tang.
* Packaging: -
* Scabbard: Leather, handcrafted, original.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory



Intended use: hunting / fishing / light hiking

Type of production: handcrafted
Country of production: USA
Blade: O1 steel
Blade finish: satin finish
Handle: leather rings, brass guard, duralumin pommel
Blade length: 115mm.
Blade thickness: 3.8mm.
Total length: 230mm.
Weight: 130g.
Scabbard: handmade, leather, for vertical carrying on belt
Packaging: -
Notes: Specimen presumably late 1970s/early 1980s in excellent condition - previously purchased knife from a private collection

History of the Model
The Model 7 was designed as a scaled-down version of the Model 3 Hunter.

Almost immediately, the idea of a scaled-down version of the new Hunter dawned on Bo Randall as an ideal knife for his fellow anglers. An avid fisherman since his youth, Bo regarded this new knife as a labor of love and immediately set to work on the project. At first he tried 4- and 4.5-inch blades, but then opted for the 4 1/2-inch one. Bo wanted the right handle for cleaning brook trout and similar sized fish, so he reduced the size of the handle of the new Hunter and changed its shape. Naturally, he called this model the "Fisherman," and some early prototypes with 4-inch blades were delivered to some dealers during the latter part of September 1945.

Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.

This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.


Intended use: regional/collectible

Type of production: handcrafted
Blade: stainless damasci steel
Country of manufacture: France
Handle: raw buffalo horn
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -

Type of production: Artisan
Country of production: Italy
Blade: 60HRC Sleipner Steel
Blade Finish: PVD
Handle: Black Stabilised Birch with FatCarbon Darkmatter guard and carbon pins
Blade length: 150mm.
Blade thickness: 6mm.
Total length: 294mm.
Balance: on the guard branch
Weight: 360g.
Scabbard: hand worked and sewn leather
Packaging and certificate: Cordura pouch and certificate of authenticity
Notes: unique knife handcrafted for Coltelleria Collini in Busto Arsizio - no. 256

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Conditions: in like new condition
* Commercially available: Out of production, model dating back to the 90s
* Sharpening: Factory
* Marks on blade: No
* Signs on handle: No
* Box: with original box in perfect condition
* Sheath: -
* Manuals, Certificates and Warranties: certificate with serial number
* Checked and Certified by our internal laboratory

Intended use: Collection / Vintage / Multipurpose

Type of production: artisanal
Country of production: Germany
Blade: stainless steel
Blade finish: satin finish
Handle: engraved wood
Blade length: 68mm.
Blade thickness: 2.0mm.
Total length: 155mm.
Balancing:
Weight: 130g.
Scabbard: -
Packaging: -
Notes: Vintage 90s knife

This handmade Finnish hunting knife is the shorter version of the classic "hunting knife". Extremely popular model due to its handy size which makes it easy to carry anywhere.

The slightly curved and short blade is particularly useful and comfortable for hunting use.

The blade is made of UHC (Ultra High Carbon) steel and the handle is made of heat-treated curly birch, coated with linseed oil, which ensures a firm grip, even when wet. The UHC steel gives the knife a very long edge life - please note that the hard UHC steel is not suitable for penetrating bone or other hard materials. Comes with a handcrafted sheath of dark vegetable tanned Finnish leather.

Intended use: Hunting/Sports

Type of production: artisanal
Blade: in UHC 62/63HRC carbon steel
Lama production: Finland
Handle: Arctic Birch
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: -
Total length: 200mm.
Balancing: -
Weight: 100g.
Closure: -
Clips: -
Sheath: in worked and hand-stitched leather
Note: -

Vintage knife produced in Portland in 1972 characterized by an extremely penetrating full flat type of sharpening, designed specifically for hunting use - Knife withdrawn from private collection - Overall in very good condition - Never used, a few small marks on the leather sheath, due to the passage of time - Free of packaging - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Collection / Vintage / Hunting

Type of production: industrial
Country of manufacture: USA
Blade: 440C stainless steel
Blade finish: mirror polish
Handle: stainless steel guard and pommel, brass spacers, macassar ebony handle
Blade length: 115mm.
Blade thickness: 3mm.
Total length: 225mm.
Balance: backward
Weight: 191g.
Sheath: leather
Packaging: -
Notes: Vintage knife from 1972 - Withdrawn from private collection globally in very good condition - Unpacked

The Rocky Mountain Spike is the result of several months of testing and fine-tuning in the field. The original design was to flank or add a large knife, such as a TOPS Machete or Power Eagle, to offer the user a variety of other applications on smaller projects. The size and steel mass of large knives certainly have their place. However, every once in a while a situation arises where one wishes to have a smaller knife, and particularly one with a narrow blade.

After using and abusing the prototypes in the field, those who have tested the small Rocky Mountain have seen a wide variety of cutting, scraping, splitting, EDC, and separating tasks for which this tool can be used effectively.

We now believe that the Rocky Mountain Spike is an excellent stand-alone toolfor hikers, bikers, campers, boaters, weekend outdoor enthusiasts, and long trips. It can be worn on your belt or kept in your backpack, boot or any other convenient place. Whether it is for general outdoor activities, at work or at home, this is the tool for you.

Intended Use: Utility

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Sandstorm Bronze
Handle: 1095 58/60HRC steel
Blade length: 8.9mm.
Blade thickness: 4.5mm.
Total length: 185mm.
Balance: on the guard branch
Weight: 70g.
Sheath: leather
Packaging: transparent plastic bag
Notes: emergency whistle 

Rare knife produced by Chris Reeve in 2007 and no longer in production since 2013. Knife from a private collection in like new condition, with original sheath, without original box and certificate. Checked and certified by our internal laboratory.

Intended use: sports / hunting

Blade: CPM-S30V 58 / 59HRC stainless steel
Blade treatment: stonewash finish
Handle: Cocobolo wood
Blade length: 88mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 201mm.
Balancing: set back
Weight: 76g.
Closure: -
Clip: -
Sheath: in leather
Notes: inyoni in Zulu means bird

Intended Use: Utility / Hunting

Production type: Industrial
Country of Production: Germany - Solingen
Blade: ful tang stainless steel AEB-L
Blade finish: Satin finish
Handle: Walnut Briar
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 153mm.
Weight: 65g.
Scabbard: leather, with clip attack
Package: cardboard box with Boker logos
Notes: Design by Lucas Burnley

Intended Use: utility / bushcraft

Type of Production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade Length: 105mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 260g.
Sheath: kydex
Package: -
Notes: Each knife is unique and handcrafted

From a private collection, this is a model no longer in production that reproduces the Argentine national knife: a blade with a simple shape that is ideal for almost everything from hunting, repair of harnesses and saddles, cooking and eating meals.

In very good condition, it shows some signs of light oxidation on the blade. Checked and certified by our internal laboratory Coltelleria Collini.

Intended use: hunting, cooking

Type of production: industrial
Blade: carbon steel 1090
Country of production: India
Handle: Malaysian Sai Wood
Blade length: 300mm.
Blade thickness: 5mm.
Total length: 447mm.
Balance: forward, 4cm. from the handle
Weight: 542g. (709G. scabbard included).
Scabbard: leather, with metal trim
Notes: -

Intended use: hunting / sports / collection

Type of production: industrial
Blade: A2 carbon steel
Production Lama: USA
Handle: Green Canvas micarta
Blade length: 140mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 270mm.
Balancing: -
Weight: 262g.
Closure: -
Clip: -
Sheath: Brown Leather
Notes: made by Bark River

Intended use: Hard Utility / Collection

Type of production: Handmade
Country of production: Italy
Blade: 59 / 60HRC D2 steel
Blade finish: Raw
Handle: Micarta
Blade length: 155mm.
Blade thickness: 5.5mm.
Total length: 255mm.
Balancing: advanced
Weight: 475g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Intended use: Pocket knife

Type of production: industrial
Blade: 19C27 stainless steel
Blade treatment: -
Handle: snakewood
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 160mm.
Balancing: -
Weight: 65g.
Closing: -
Clip: -
Notes: aluminum box

Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.

Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:

Intended use: Collection / Sports

Type of production: Artisan
Lama production: Japan
Blade: Forged by hand, in Hitachi Shirogami 64HRC carbon steel
Blade treatment: -
Handle: traditional Japanese bamboo wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: -
Total length: 215mm.
Thickness when closed: -
Balancing: -
Weight: 80g.
Closure: -
Clip: -
Sheath: bamboo wood
Packaging: Carton box
Notes: entirely handmade by Takeshi Saji

Tommaso Rumici explains his knife: "Drawing the Octopus I wanted to create a knife that was versatile enough to be interesting for the various types of Fox customers: sporting, hunting and military, the result is, in my opinion, an excellent compromise between portability and performance: it will never be too big or heavy to have it with you in time of need. "

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel laminated SanMai 420J2 / VG10 to 60 / 62HRC
Blade treatment: Satin
Handle: Ziricote wood
Blade length: 115mm.
Blade thickness: 4mm.
Total length: 240mm.
Balancing: -
Weight: 170g.
Sheath: in leather
Packaging: cardboard box with Fox logos
Notes: design by Tommaso Rumici

Use: hunting / collection

Type of production: industrial
Production Blade: Italy
Blade: integral, steel 440
Blade Treatment: -
Manicure: Paracord
Blade Length: 100mm.
Blade thickness: 4mm.
Total length: 220mm.
Balance: backward
Weight: 185g.
Sheath: leather sheath
Packing: -
Notes:

The dagger is based on the original Fairbairn and Sykes; It is a collector's knife designed by Hill Knives to honor and commemorate the special forces around the world.

WARNING: The blade leaves the factory without any type of sharpening, so that this product is sold and released in accordance with current regulations in force in Italy.

Purpose: collecting

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade Treatment: PVD
Handle: Walnut wood
Blade Length: 170mm.
Blade thickness: 5mm.
Total length: 300mm.
Balancing: Rearranged
Weight: 205g.
Sheath: leather
Packing: Cardboard box with FKMD logos
Notes: Sharpening blade - design by Hill Knives

The dagger is based on the original Fairbairn and Sykes; It is a collector's knife designed by Hill Knives to honor and commemorate the special forces around the world.

WARNING: The blade leaves the factory unsharpened / with dull edge; due to italians current regulations and law restrictions.

Purpose: collection

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade Treatment: Satin
Handle: Walnut wood
Blade Length: 170mm.
Blade thickness: 5mm.
Total length: 300mm.
Balancing: -
Weight: 205g.
Sheath: leather
Packing: Cardboard box with FKMD logos
Notes: Design by Hill Knives - blade with dull edge / unsharpened due to italian law restrictions

Purpose of use: Collection / Sportsman / Machete

Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Wood covered with leather strip
Blade Length: 175mm.
Blade thickness: 5mm.
Closed length: -
Total Length: 315mm.
Closure thickness: -
Balance: -
Weight: 98g.
Closure: -
Clip: -
Sheath: Leather treated
Packing: Carton box
Notes: Hand made entirely by Takeshi Saji

Blade: Carbon Steel
Handle: horn
Blade length: 225 mm.
Blade Thickness: 10 mm.
Overall length: 350 mm.
Weight: without covers g. 375 - g with sheath. 504
Sheath: leather and wood, handmade
Notes: every knife and 'entirely handmade in Nepal and also includes two small knives.

Blade: Carbon Steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: engraved patterns in black and gold with a drawing of a sun
Handle: Wood
Finishes: Brass
Blade length: 225 mm.
Blade Thickness: 8.5 mm.
Overall length: 355 mm.
Karda: 90 mm.
Chakmak: 90 mm.
Weight: 350g.
Sheath: leather and wood
Notes: Nepalese original knife made entirely by hand

Down Under Knives - Walkabout Bowie - knife - L446021

Intended Use: Hunting / Outdoor

Type of production: Industrial
Production Lama: Taiwan
Blade: Stainless steel 440C Differentiated hardening 58 / 45HRC
Lama treatment: Mirror polishing
Handle: brass, ebony wood and leather rings
Blade length: 195mm.
Blade thickness: 6mm.
Overall length: 325mm.
Weight: 566g.
Sheath: Leather
Packaging: cardboard box with logos Down Under, sharpening steel for sharpening
Notes:

Mcusta - Turo Take Dark Wood Money Clip MC-0151 Japan - knife

Intended use: sports / collection / money clip

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: AUS-8 stainless
Production Lama: Japan
Handle material: steel and ebony
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 76mm.
Overall length: 135mm.
Balancing: -
Weight: 34g.
Closure: Slip joint
Clip: present
Sheath: -
Notes: -

Intended Use: Sport / Collection

Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel hardened selective
Treatment Blade: -
Handle material: Leather Rings
Blade length: 329mm.
Blade thickness: 5.5mm.
Length closed: -
Overall length: 450mm.
Thick when closed: -
Balancing: -
Weight: 832g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos Down Under Knives
Notes: -

Made according to the ancient art of knives, the Piedmontese knife, typical of the Piedmont Region, retains its original sober line.
Solid and functional, the blade is in stainless steel and the handle is a monobloc made of bovine horn.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 90mm.
Total length: 180mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of ram's horn are affected by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 120mm.
Total length: 215mm.
Weight: 53g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Blade: N690Co Stainless Steel

Handle: Ziricote Wood

Blade Lenght: 105mm.

Blade Thickness: 5mm.

Overall Lenght: 237mm.

Weight: 246g.

Sheath: Brown Leather

Notes: Made in Italy - Design by Fabrizio "Sylvester" Silvestrelli

Intended Use: Collection

Type of production: Industrial
Production Lama: China
Blade: AUS-6 stainless steel
Treatment Lama: -
Handle material: Wood and avoriolina scrimshaw printed with "The Expendables"
Blade length: 300mm.
Blade thickness: 5mm.
Length closed: -
Total length: 440mm.
Thick when closed: -
Balance: -
Weight: 675g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Guard and false gold plated brass - Warranty - Cardboard box with logos The Expendables
Notes: Exact replica behind movie licenses in the film directed by and starring Sylvester Stallone: The Expendables II (Mercenaries II)

Destinazione d'uso: Tattico/Sportivo

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox N690Co
Trattamento Lama: -
Manicatura: Legno di Ziricote
Lunghezza lama: 130mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 280mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 265g.
Fodero: Cuoio
Confezione: Scatola di cartone con loghi Fox
Note: Design by Jerry Hossom

Intended use: Heavy Utility

Type of production: Industrial
Blade: 440C stainless steel with differential hardening 59/46HRC
Blade Treatment: Mirror polish
Handle: Brass and leather rings
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 307mm.
Weight: 465g.
Sheath: Leather, with bone inserts
Packaging: Cardboard box with Down Under logos and warranty certificates

Le prime notizie certe su questo coltello risalgono al 1848. Un esemplare, datato 1871, è conservato nell'Archivio di Stato di Firenze, allegato agli atti di un processo a carico di un pregiudicato. Su di esso è ben visibile il marchio di un fabbricante di Scarperia, Gustavo Buffi, la forma della lama è quella con dorso angolato, mantenuta anche nel Novecento e presente nei cataloghi di varie ditte scarperiesi. Il Maremmano è un modello in punta di corno. 

Lama. in acciaio inox 440, 
Manicatura: in corno bovino lucido
Lunghezza totale 200 mm
Lunghezza lama: 90 mm 
Affilato a mano

ATTENZIONE: trattandosi di materiale naturale, la colorazione del corno può risultare diversa da quella presente in foto.

Intended use: Survival / Collection

Blade: 420J2 stainless steel
Lama production China
Handle: Wood
Blade length: 320mm.
Blade thickness: 5.5mm.
Length closed: -
Total length: 455mm.
Balancing: -
Weight: 922g.
Closing: -
Clip: -
Sheath: leather
Notes: Official reproduction under cinema license
Send feedback
History
Saved
Community

Kukri - World War II Gurkha

Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).

Blade: Carbon steel
Handling: Wood - ATTENTION, since it is a handicraft product, the color of the handle may vary from the photographed model
Blade length: 250 mm.
Blade thickness: 11 mm.
Total length: 405 mm.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Polished
Handle: brown leather
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Weight: 68g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

LoneWolf - Loveless City - Micarta knife

Intended use: Pocket Knife

Type of production: industrial
Blade: stainless steel 19c27
Treatment Blade: -
Handle: micarta loveless
Blade length: 60mm.
Blade Thickness: 2.5mm.
Closed Length: 95mm.
Overall length: 160mm.
Balancing: -
Weight: 65g.
Closure: -
Clip: -
Notes: aluminum box