Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Blade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catch

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory

Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim Vagner

Knives made in collaboration with Dönges are specialized tools for difficult and demanding rescue operations. What the products have in common are the red G10 handles with non-slip Dönges honeycomb structure, the incredibly tough and high-performance D2 steel blades and the presence of a glass breaker. 

The Expert Fire Folder has two rescue blades that open in opposite directions. While the spear point blade is suitable for universal cutting tasks, the rescue blade has several multifunctional cutting surfaces. It has a serrated edge for ropes and a lever point with integrated nail extractor. A belt cutter is located directly behind the tip. Finally, the multifunctional blade has a bottle opener for a well-deserved break after use. 

Intended Use: Emergency/Rescue

Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: stainless steel and G10 folders
Blade length: 100mm.
Blade thickness: 3.2mm.
Total length: 235mm.
Weight: 315g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Donger logos, zippered nylon pouch 
Notes: tungsten carbide rear glass breaker - Second emergency lever lock blade with crowbar, belt cutter and bottle opener - Carson Flipper type opening system

Knives made in collaboration with Dönges are specialized tools for difficult and demanding rescue operations. What the products have in common are the red G10 handles with non-slip Dönges honeycomb structure, the incredibly tough and high-performance D2 steel blades and the presence of a glass breaker. Both knives feature multiple cutting edges uncompromisingly designed to cut through ropes, harnesses and clothing of injured people.

This model, designed specifically for firefighters, features a universal spear point blade that can be opened with either the flipper or thumb pin system; there is also the multi-position clip in addition to the belt cutter that can be retracted inside the handle.

Intended Use: Emergency/Rescue

Production Type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Teflon coated
Handle: stainless steel and G10 folders
Blade length: 116mm.
Blade thickness: 3.2mm.
Total length: 271mm.
Weight: 254g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Donger logos, zippered nylon pouch 
Notes: Rear tungsten carbide glass breaker - Rear removable belt cutter - Carson Flipper type opening system on ball bearings

The GLAUCA B1 folding knife was born from the collaboration with the GIGN (special unit of the French National Gendarmerie). It has a tip designed to allow maximum penetration. On the back of the handle it features a stop strap cutting system.

It is equipped with a rear glass breaker, a clip that can be applied in three positions and a side safety device.

The rigid sheath is made of ABS applied to a Cordura base and allows you to store the knife with the blade open.

Allows multiple attachment options: MOLLE system for tactical vests, belt attachment and thigh attachment.

KNIFE RETIRED FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: Excellent condition
* Commercially available No
* Sharpness: Original
* Marks on blade: small scratches on the blade
* Marks on handle: NO
* Packaging: YES
* Sheath: YES
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratory

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Burnished
Handle: Rough Anticorodal
Blade length: 115mm.
Blade thickness: 4mm.
Closed length: 158mm
Total length: 268mm.
Closed thickness: 15mm.
Weight: 197g.
Closure: Liner Lock with Additional Safety
Clip: Removable and multi-position, in stainless steel
Sheath: Cordura and Kydex with magnetic blade retention
Packaging: Cardboard box with Extrema Ratio logos
Notes: supplied with the G.I.G.N. (National Gendarmerie Intervention Group) French, specialized in operations against terrorism and emergency response in the event of hostages

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available: Findable
* Sharpening: Factory.
* Marks on blade: Small abrasions on matte black finish.
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: black titan carbonitriding
Country of manufacture: Japan
Handle: black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 106g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collection

Extrema Ratio Caimano Nero N.A. Ranger XXV Anniversarium Limited Edition is a limited series version of only 250 pieces that preserves intact all the features of the famous Caimano Nero N.A. model, a non-automatic version of the tactical knife that Extrema Ratio delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy.

The Extrema Ratio Caimano Nero N.A. Ranger XXV Anniversarium Limited Edition comes in an IP67-certified watertight Polypropylene technical case, with pressurization valve, weatherproof, dustproof and shockproof, inside of which is also an Extrema Ratio 25th Anniversary commemorative coin and metal plaque with the progressive number of the limited series.

Intended Use: Tactical/Military

Type of manufacture: industrial
Blade: stainless steel N690Co 58HRC
Country of Production: Italy
Handle: Anticorodal
Blade length: 93mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 231mm.
Weight: 180g.
Closure: Liner Lock with additional safety catch, when knife is open
Clip: deep pocket, reversible and removable, stainless steel
Notes: Limited edition made of only 250 pieces accompanied by polypropylene case and commemorative coin

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 2014 knife overall in near new, unused condition, some minor marks on metal parts given by age
* Commercially available Discontinued.
* Sharpening: Factory sharpened, never used for cutting.
* Marks on blade: No
* Marks on handle: Some discoloration of laser engravings given by age.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Multirole

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade Finish: Desert Warfare
Handle: Anticorodal with stainless steel spacer
Blade length: 115mm.
Blade thickness: 6.3mm.
Total length: 260mm.
Weight: 245g.
Lock system: Back Lock with additional safety pin
Packaging: cardboard box with Extrema Ratio logos
Notes: Previously purchased discontinued specimen from a private collection. Full set, in near-new condition

When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a serrated tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Black anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -

Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.

Intended Use: Tactical

Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movement

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in excellent condition
Available in commerce: NO
Sharpening: Original
Marks on blade: YES - small marks
Marks on handle: NO
Packaging: YES, original box
Checked and Certified by our internal laboratory
Intended use: Tactical/Military

Type of production: Industrial
Country of production: USA
Blade: In stainless steel 154CM
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel liners
Blade length: 101mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 222mm.
Thickness when closed: 21mm.
Weight: 225g.
Closure: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without box

Intended Use: EDC / Rescue

Production type: Industrial
Country of manufacture: China
Blade: Steel 440 HRC 55-57
Blade treatment: varnishing
Handle: G10
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 208mm.
Weight: 162g. (197g. including scabbard)
Clip: -
Closure: Liner Lock
Packaging: cardboard box with BlackFox logos
Notes: glass breaker - 7, 8 and 10 mm bolt insert - oxygen cylinder opening insert - nylon sheath

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory



Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,

Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.

Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM 
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logos

NON-automatic version of the Caimano Nero model

The Black Caiman is a tactical knife that Extrema Ratio, official supplier of Comsubin, has developed and delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy. Its name recalls and pays homage to the heroic Caimani Neri del Piave, a department of Arditi of the Regia Marina and other components on a voluntary basis, which during the First World War crossed the Piave River by swimming to carry out raids in enemy territory.

Spear Point" 4 mm blade with asymmetrical rounding and partial sharpening of the counterbore to increase the penetration coefficient. The toothing on the blade allows you to cut cables and fabrics with high resistance preserving the sharpness.

It is a medium folder with a robust structure. The thick aluminum cheeks, thanks to the many processes of removal make the knife light and balanced. The end of the handle, which recalls the shape of the Helix/Timon group of the slow running torpedo (S.L.C.), serves to improve the grip for the rapid extraction of the knife from the pocket.

The DLC-coated titanium clip can be positioned at three different angles on either side to allow for maximum customization of the carry. Its shape is designed to minimize the bulk of the handle outside the pocket.

Among its endowments, besides the carbide glass breaker, there is also a safety, that when inserted, preserves from a dangerous accidental closing of the blade.

Destination of use: Tactical/Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade length: 93mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total lenght: 231mm.
Weight: 180g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Notes: Additional safety stop, when knife is open

The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.

Intended use: Sports / Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening system

Intended Use: Sporting

Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: Satin-finished stainless steel
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Thickness when closed: 8mm
Weight: 162g.
Closure: Back Lock
Clip: multi-position, removable, stainless steel
Package: cardboard box with Spyderco logos
Notes: -

The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.

Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

Production type: Industrial

Country of Production: USA
Blade: Stainless steel 440C
Blade treatment: Black Traction Coating
Handle: Stainless steel 440C
Blade Length: 56mm.
Blade thickness: 4.45mm.
Total length: 158mm.
Weight: 85g.
Scabbard: polymer, with clip attachment
Packaging: cardboard box with Benchmade logos
Notes: Design by Greg Thompson

After the success of the FULCRUM multirole knife, the civil bayonet version NFG (No Fixing Gears, without rifle attachment) was born. Like the FULCRUM, the bayonet is an extremely robust and versatile knife, the blade withstands breaking loads exceeding 150 kg, the tip is very robust and the profile allows you to work for a long time with the knife without affecting the sharpness of the last section . The advanced center of gravity and the weight of the blade make it suitable for heavy field work.

Intended use: tactical / military / multirole

Blade: N690Co 58HRC stainless steel
Handle: removable, in Forprene
Blade length: 180mm.
Blade thickness: 6.3mm.
Closed Length: -
Total length: 310mm.
Balance: advanced, 1.5 cm from the lower guard branch
Weight: 330g.
Closing: -
Clip: -
Sheath: modular tactical, from thigh or belt, in Nylon and Kydex, with blade attachment system for cutting with wire cutters
Notes: diamond sharpener integrated in the sheath - civil version, without rifle couplings

Intended use: Sports

Type of production: Industrial
Blade production: USA
Blade: 1095 carbon steel
Blade treatment: Textured powder coat
Handle: Desert Canvas Micarta
Blade length: 97mm.
Blade thickness: 3mm.
Length closed: -
Total length: 210mm.
Thick when closed: -
Balancing: -
Weight: 148g.
Closing: -
Clip: -
Sheath: ABS and Nylon with additional clip for wearing on the belt
Packaging: Transparent plastic bag
Notes: Malice Clips

Intended use: tactical / military

Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g.
Closing: -
Sheath: in kydex
Note: -

After the success of the FULCRUM multi-role knife, the bayonet version was born. Like the FULCRUM, the bayonet is an extremely robust and versatile knife, the blade holds loads at break above 150 kg, the tip is very sturdy and the profile allows it to work for a long time with the knife without affecting the sharpening of the last section , which guarantees, together with the partial dorsal sharpening, to maintain the penetration capacity necessary for hand-to-hand combat against targets covered by heavy clothing, clothing and soft ballistic protections. The advanced center of gravity and the weight of the blade make it suitable for heavy field work. NFG version (No Fixing Gears, without rifle mount).

Intended use: tactical / military / multi-role

Blade: full tang in stainless steel N690Co 58HRC
Handle: removable in Forprene
Blade length: 180mm.
Blade thickness: 6.3mm.
Total length: 310mm.
Balancing: advanced, 1.5 cm from the lower guard branch
Weight: 378g.
Sheath: modular tactile with thread trimmer, thigh or belt, in Nylon and Kydex

Intended use: tactical / sports

Type of production: Industrial
Country of production: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: Black DLC
Handle: G10 with aluminum spacers
Blade length: 94mm.
Blade thickness: 3.1mm.
Length closed: 124mm.
Total length: 218mm.
Weight: 165g.
Closure: Axis
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Benchmade logos
Note: -

intended use: tactical

type of production: Industrial
production country: USA
mama: stainless steel CPM-S30V 58 / 60HRC
Blade treatment: Black PVD with Sandpaper Texture inserts
sleeve: G10 and stainless steel liners steel with PVD coating
blade length: 87mm.
blade thickness: 3.1mm.
closed length: 116mm.
total length: 204mm.
weight: 120g.
closing: AxisLock
clip: Removable and reversible, in stainless steel
packaging: Cardboard box with Benchmade logos
notes: Design by Steve Tarani - "Sandpapper Texture" anti-slip inserts in the upper part of the blade

Intended use: rescue / emergency

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Stonewashed
Grip: steel folders, G10 grips sensitive to UV rays
Blade length: 62mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 178mm.
Thick when closed: 13.3mm.
Weight: 112g.
Opening: Carson Flipper system / opening hole on the blade / opening simil emerson wave in pocket extraction
Washers: stainless steel, with ball bearings
Closure: Liner Lock, with additional manual safety
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Crasher on the front of the handle - quick-release carabiner in the rear ring - Phillips screwdriver on the upper guard branch

Intended use: rescue / emergency

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co
Blade treatment: Teflon coating
Grip: steel folders, G10 grips
Blade length: 62mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 178mm.
Thick when closed: 13.3mm.
Weight: 112g.
Opening: Carson Flipper system / opening hole on the blade / opening simil emerson wave in pocket extraction
Washers: stainless steel, with ball bearings
Closure: Liner Lock, with additional manual safety
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Fox FKMD logos
Notes: Skull Crasher on the front of the handle - quick-release carabiner in the rear ring - Phillips screwdriver on the upper guard branch

Intended use: Tactical / Military

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black Idroglider
Handle: Forprene
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 295g.
Sheath: cordura, with leg strap
Packaging: cardboard box with Fox logos
Note: -

Designed by Ettore Zanon, Croz is a high-quality fixed knife designed to eviscerate ungulates.

It is a simple and lightweight 23cm wide blade, 11 of which 4mm thick blade, N690 steel, 60 HRC, one of the best in the world with a high carbon content and a hardness that allows it to work well without losing the thread. Suture in the part near the handle is intended to facilitate work on the bony parts.

For ergonomics, cheeks are tapped to make it more difficult to slip in the work phases. Maximum safety, guaranteed by generous guard and knurling at the top of the blade, which will make it extremely difficult to lose grip.

Purpose: Hunting / Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co 60HRC
Blade Treatment: Satin
Handle: Black G10
Blade Length: 110mm.
Blade thickness: 4mm.
Total Length: 230mm.
Balance: Returned to 2.5cm. from the guard branch
Weight: 190g.
Sheath: in Nylon
Packing: Cardboard box with Maserin logos
Notes: Dotted by Ettore Zanon - In the grip there is a handy diamond sharpener attached to the tang.

Designed by Ettore Zanon, Croz is a high-quality fixed knife designed to eviscerate ungulates.

It is a simple and lightweight 23cm wide blade, 11 of which 4mm thick blade, N690 steel, 60 HRC, one of the best in the world with a high carbon content and a hardness that allows it to work well without losing the thread. Suture in the part near the handle is intended to facilitate work on the bony parts.

For ergonomics, cheeks are tapped to make it more difficult to slip in the work phases. Maximum safety, guaranteed by generous guard and knurling at the top of the blade, which will make it extremely difficult to lose grip.

Purpose: Hunting / Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless Steel N690Co 60HRC
Blade Treatment: Satin
Handle: Micarta
Blade Length: 110mm.
Blade thickness: 4mm.
Total Length: 230mm.
Balance: Returned to 2.5cm. from the guard branch
Weight: 190g.
Sheath: in Nylon
Packing: Cardboard box with Maserin logos
Notes: Dotted by Ettore Zanon - In the grip there is a handy diamond sharpener attached to the tang.

When it comes to all around functionality, you can't beat the Griptillian®. There are more shapes, sizes and colors available in the Griptillian than any other product family from Benchmade. Made in USA.

Designer: Pardue
Mechanism: AXIS®
Action: Manual-opening
Blade Steel: 154CM (58-61 HRC)
Blade Length: 3.45" (8.76cm)
Blade Thickness: 0.115" (2.92mm)
Open Length: 8.07" (20.50cm)
Closed Length: 4.62" (11.73cm)
Handle Thickness: 0.64" (16.26mm)
Weight: 3.88oz. (110.00g)

You never know when a simple morning walk will take you down new trails, but that possibility is no problem if you have the Desert Camo multi-purpose Trailmaster with you.

Nestled between the two two-component cheek pads of this item are ten features that combine to give you all the support you might need. So no matter where you're going or what you're doing, this is the reliable tool you should take with you on every adventure!

FEATURES
1. Large lockable blade
2. Phillips screwdriver
3. Can opener with
4. - Small screwdriver
5. Cap lifter with
6. - Screwdriver
7. - Wire stripper
8. Reamer / Awl
9. Key ring
10. Wood saw

SPECIFICATIONS
Functions: 10
Cheek material: two-component
Dimensions: 11.10 x 1.80 x 3.45cm
Weight: 130g
Blade opening: one-handed
Locking system: Liner Lock on blade and main flat screwdriver

Folding knife with rescue karambit connotation, adopted by the special units of the Police of the Principality of Monaco U.S.I.V.P. The knife gets its name from a development and consulting department of the special intervention forces Monegasque.

Intended use: Tactical / Rescue

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Stone Washed
Handle: Anticorodal
Blade length: 73.5mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 196mm.
Thick when closed: -
Weight: 166g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos
Notes: Size emergency belts and skull crasher

Folding knife with rescue karambit connotation, adopted by the special units of the Police of the Principality of Monaco U.S.I.V.P. The knife gets its name from a development and consulting department of the special intervention forces Monegasque.

Intended use: Tactical / Rescue

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade length: 73.5mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 196mm.
Thick when closed: -
Weight: 166g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos
Notes: Size emergency belts and skull crasher

Intended use: Tactical

Type of production: Industrial
blade production: U.S.A.
Blade: Reverse Tanto CPM-S30V Steel 58 / 60HRC
Blade treatment: -
Handle: Aluminum
Blade length: 86mm.
Blade thickness: 3mm.
Closed Length: 113mm.
Overall length: 200mm.
Thick when closed: -
Balancing: -
Weight: 82g.
Closing: AXISLock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with Benchmade logos
Notes: hook skinned

Intended Use: Tactical / Hiking

Type of production: Industrial
Blade: full tang, stainless steel 420HC
Treatment Lama: Ceramic Coating
Production Lama USA
Handle material: fiberglass and nylon with rubbered anti slip polymer
Blade length: 122mm.
Blade Thickness: 5mm.
Overall length: 248mm.
Balancing: backward 1cm.
Weight: 204g.
Sheath: Nylon and polymers, MOLLE compatibile
Notes: Skullcrasher with hole

Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breaker

Maserin - Multipurpose Rescue - Aluminum - 283 / 2N - knife

Intended use: Tactical Rescue

Type of production : industrial
Blade: Stainless steel N690
Treatment Lama : -
Production Lama : Italy
Handle material: aluminum
Blade length : 80mm .
Blade Thickness : 3mm.
Closed Length : 125mm .
Overall length: 210mm .
Balancing : -
Weight: 242g .
Lock: Back Lock
Clip: -
Sheath: Cordura
Notes: wood saw, window breaker belt cutter

Intended use: tactical / military / collection

Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g. (406g. With scabbard)
Closing: -
Sheath: in leather
Note: -

Chad Banos' practical Bo Plus Subcom can definitely be described as one of the leaders of Boker Plus today.

The enormous value of utility in everyday life and the space-saving design have become legendary. The continued popularity of the versatile pocket knife has now prompted us to relaunch this ultra-compact classic in our range in a modernized version.

The Böker Plus Subcom 2.0 is equipped with a short D2 blade with black coating.

It opens using the thumb pins on both sides and locked in place firmly by the 2mm steel plate of the frame lock. A pronounced hand protection increases grip comfort and glide in the blade.

The structured handle in black Zytel has three-dimensional grooves and thanks to this surface structure, the ergonomic shape and the ribs in the thumb rest area, it always stays firmly in the hand, even when wet. With lanyard hole and reversible clip

Intended use: Sports

Blade: D2 steel 58/60 hours
Handle: stainless steel and Zytel
Blade length: 55mm.
Blade thickness: 2mm.
Closed length: 68mm.
Total height of the lung: 117 mm.
Balance: -
Pesos: 69 g.
Closure: frame lock
Clip: removable and reversible in stainless steel
Sheath: -
Grade: -

Fox - Hoplite Combat Knife - Kraton G-Coyote Tan - FX-0171116 - knife

Intended Use: Combat / All Round Utility

Blade: Stainless Steel N690Co 59/60HRC
Treatment: Coyote Tan Idroglider
Handle: Kraton
Blade length: 185mm.
Blade Thickness: 5mm.
Length closed: -
Overall length: 315mm.
Balancing: On the branch guard
Weight: 285g.
Closure: -
Clip: -
Sheath: Modular fiberglass, and Cordura Nylon with stainless steel cable cutters
Notes: -

Ka-Bar - Knife Big Brother - KB2217 - knives

Blade: 1095 Carbon Steel Teflon coated 56/58HRC
Handle: leather discs
Blade Length: 236 mm.
Total length: 360 mm.
Blade thickness: 4 mm.
Weight: 412g.
Sheath: Leather
Notes: -

The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.

Intended use: Sports / Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

Destinazione d'uso: Rescue / Neck Knife

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox N690Co
Finitura Lama: lucidata
Manicatura: G-10
Lunghezza lama: 70mm.
Spessore lama: 3.5mm.
Lunghezza totale: 145mm.
Peso: 70g.
Fodero: ABS, da collo
Confezione: Scatola di cartone con loghi Fox
Note: Design by Alfredo Doricchi

Type of production: industrial
Blade: Stainless steel N690Co
Treatment Blade: Teflon
Handle material: ABS resin with non-slip inserts
Blade length: 78mm.
Blade Thickness: 5mm.
Closed Length: 120mm.
Total length: 200mm.
Balance: -
Weight: 172g.
Lock: Liner Lock
Clip: removable stainless steel;
Sheath: Kydex with spring attachments
Notes: multi-purpose knife, evacuation hammer, screwdriver bits 2

Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.

Intended use: Collection / Sports

Blade: Teflon-coated 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing thread

Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.

Intended use: Collection / Sports

Blade: 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing thread

The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.

Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.

Intended use: Sports / Collection

Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos

Intended use: Sport

Type of production: Industrial
Production Blade: Spain
Blade: 440C stainless steel
Treatment Lama: -
Handle: PVC
Blade length: 106mm.
Blade thickness: 2.5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 120g.
Closing: -
Clip: -
Sheath: PVC and nylon sling and with tourniquet
Packaging: cardboard box with logos Aitor
Notes: compass and survival kit inside the handle

Knife withdrawn from a private collection - Knife no longer in production since 2014 - in excellent condition, without box - Never resharpened - Checked and certified by our internal Coltelleria Collini laboratory.

Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim Vagner

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr14MoV to 58-60 HRC
Blade treatment: Ti-Ni
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 17mm.
Balancing: -
Weight: 180g.
Closure: Liner Lock with auto-LAWKS locking system
Clip: stainless steel
Sheath: -
Packaging: cardboard box with CRKT logos
Note: -

Knife from a private collection, overall in excellent condition, with scratches on the blade due to insertion and removal from the sheath. Unpackaged - Checked, certified by our in-house laboratory.

Designed for NATO military aircraft crews, the ASEK-Bowie is a rescue and emergency knife

Intended use: Fighter / Tactical

Type of production: industrial
Blade: 440 56HRC stainless steel
Blade treatment: Teflon coated
Production Lama: Germany
Handle: Polyamide reinforced with fiberglass
Blade length: 135mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 270mm.
Balancing: -1cm back from the guard branch
Weight: 235g.
Sheath: cordura and polyamide with sharpener and small backup knife

Intended use: tactical / military / multirole
Blade: full tang stainless steel N690Co 58HRC Desert Warfare
Handle: Removable in Forprene
Blade length: 180mm.
Blade Thickness: 6.3mm.
Closed Length: -
Overall length: 310mm.
Balancing: Advanced, 1.5 cm from the branch of the lower guard
Weight: 325g.
Closed: -
Clip: -
Sheath: modular tactical, from thigh or belt, Nylon and Kydex
Notes: -

Knife for special uses, developed specifically for the 9th Parachute assault regiment Col Moschin, elite unit of the Folgore Brigade.

All the knives in this series have straight KRATON handles with an ergonomic design whose shape and size, in addition to a solid grip, allows a rapid change of grip from straight (Sabre Grip) to reverse (Reverse Grip). A stainless steel Allen screw allows the disassembly for maintenance and lubrication of the tang through increasing the operational life of the knife.

The sheath is suitable for airdrop, underwater and amphibious operations and can be attached to a belt or equipment.

Intended use: Collection/Tactical/Military

Country of production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Burnishing MIL-C-13924
Handle: Removable, in Kraton
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 290mm.
Balance: backward, at 1cm. from the lower guard branch
Weight: 265g.
Sheath: Modular tactical sheath, for thigh or belt, in Nylon.
Packaging: Cardboard box with Extrema Ratio logos
Notes: Developed and used by the 9th Parachute Assault Regiment Col Moschin of the Folgore Brigade of the Italian Army.

Cutting knife for special uses, developed specifically for the 9th Parachute Assault Regiment Col Moschin, elite units of the brigade Thunderbolt.

All knives in this series have straight handles in KRATON from ergonomic design whose shape and size as well as a firm grip promotes the rapid change of grip from the starboard (Sabre Grip) to reverse (Reverse Grip). An allen screw in stainless steel allows the dismantling of the campaign for the maintenance and lubrication of the shank through increasing the operating life of the knife.

The sheath and 'suitable all'aviolancio and underwater and amphibian operations and' applicable to the belt or accoutrements.

Intended use: Collection / Tactical / Military

Blade: Stainless steel 58HRC N690Co GeoCamo
Handle: Kraton removable
Blade length: 160mm.
Blade Thickness: 6.3mm.
Length closed:-mm.
Total length: 290mm.
Balance: back, 1 cm. the branch of lower guard
Weight: 265g.
Closing: -
Clip: -
Sheath: tactical adjustable, from thigh or belt, Nylon
Notes: -

After the Shrapnel, Extrema Ratio gives us a second knife that, despite having a total length of only 21 centimeters, maintains all the technical / tactical characteristics of the previous models.

The Fulcrum C (compact) therefore completes the Fulcrum series with a fixed blade. Sturdy and compact knife, suitable for emergency or concealed use.

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Finish: camouflage coating
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Total length: 210mm.
Balancing: set back
Weight: 200g.
Sheath: rigid in ABS with Tek-Lok coupling with automatic knife retention system.
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates

Extrema Ratio Fulcrum Compact Testudo

After Shrapnel, Extrema Ratio gives us a second knife which, while having a total length of just 21 centimeters, it maintains all the technical / tactical previous models.

The Fulcrum C (compact) then goes to complete the series of Fulcrum fixed blade knife and turns out to be a robust and compact, suitable for use in emergency or concealed.

Occupation: knife backup
N690 steel blade with 58HRC coated testudo
Blade thickness: 6.3 mm.
Blade length: 110 mm.
Total length: 210 mm.
Handle in Forprene
ABS hard case with Tek-Lok coupling with automatic retention of the knife.

Knife distributed in 2000 pieces to the Alpine Body of the Italian Army as part of the "Nibbio" operation in Afghanistan

Target for use: tactical / military / multiruolo

Blade: full tang in stainless steel N690Co 58HRC
Manicure: Removable in Forprene
Blade Length: 180mm.
Blade thickness: 6.3mm.
Closed length: -
Total Length: 310mm.
Balancing: advanced, 1.5 cm from the lower guard branch
Weight: 325g.
Closure: -
Clip: -
Sheath: modular tactical, thigh or belt, in Nylon and Kydex
Notes: -

Intended Use: Tactical/Military

Production type: Industrial
Country of Production: Italy
Blade: Steel N690Co 58HRC
Blade Finish: Testudo
Handle: Forprene
Blade Length: 140mm.
Blade thickness: 6.3mm.
Total length: 280mm.
Weight: 295g.
Sheath: Modular, cordura, with M.O.L.L.E system and with ABS inner shell
Packaging: black cardboard box with Extrema Ratio logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: in good condition, with a few small marks that do not affect its use.
* Commercially available: discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Some non-removable adhesive residue.
* Marks on handle: Small signs of wear on the clip's paintwork.
* Box: Absent
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory

Intended Use: Emergency / Rescue / Multipurpose Tactical

Country of Production: Italy
Blade: N690Co stainless steel with DLC treatment
Handle: G10
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 150mm.
Total length: 240mm.
Weight: 178g.
Closure: Liner Lock
Clip: teflonized steel black reversible
Sheath: cordura, belt-mounted
Notes: emergency rear belt cutter, glass breaker on tang

Designed to solve emergency and survival situations, it is particularly suitable for its characteristics as equipment for pilots, aircraft crews and paratroopers.

This knife is currently supplied to the 49th "Capricorn" Air Cavalry Helicopter Squadron Group stationed at the "Francesco Baracca" barracks in Casarsa della Delizia (PN) with tasks of armed reconnaissance, armed escorts, attack, deep attack, precision attack, fire support, suppression of air defense centers and security. They also contributed from the sky to the ground security of the Italian contingents in Somalia, Albania, Kosovo.

Intended use: Tactical

Blade: N690Co stainless steel
Lama Italy production
Handle: G-10 black
Blade length: 100mm.
Blade thickness: 3mm.
Closed length: 145mm.
Total length: 240mm.
Balancing: -
Weight: 230g.
Closure: Liner Lock
Clip: removable, in stainless steel
Sheath: rigid, thigh, in green nylon
Notes: emergency belt cutter, wood saw with liner lock closure - double safety lock to prevent blade closure

Destinazione d'uso: Tattico / Utility

Tipo di produzione: Industriale
Paese di produzione: Italia
Lama: Acciaio Inox N690Co
Trattamento Lama: Teflonata
Manicatura: Forprene
Lunghezza lama: 180mm.
Spessore lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 313mm.
Spessore da chiuso: -
Bilanciatura: Avanzata a 1cm. dal ramo di guardia
Peso: 313g.
Fodero: in Nylon e ABS con tagliacavi
Confezione: scatola in cartone con loghi Fox
Note: -

KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Tactical / Collection

Type of production: Industrial
Blade production: Italy
Blade: N690Co 58HRC stainless steel
Blade Treatment: DLC
Handle: G-10 and titanium
Blade length: 95mm. partially serrated edge
Blade thickness: 4mm.
Closed length: 130mm.
Total length: 225mm.
Thickness when closed without clip: 10mm.
Balancing: -
Weight: 152g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -

Gerber - Brown LMF II Infantry - 1400 - knife

The knife is in fact designed not only to be extremely nimble and fleet changes of grip , but also rugged enough to pierce the fuselage of a plane but also simply be used as a hammer, frangivetri or throwing knife .

Intended Use : Sport / Tactical / Military

Intended Use: Military

Type of production : industrial
Blade: Stainless steel 12C27
Treatment Blade: TiNi - Titanium Nitride
Production Lama USA
Handle material: non-slip fiberglass and nylon
Blade length : 125mm .
Blade Thickness: 4mm .
Length closed: -
Total length : 275mm .
Balance: backward 3cm .
Weight: 330g .
Closing: -
Clip: -
Sheath: Nylon and fire retardant polymers slip , multi- attacks SPRINGS system , ultra-thin to limit the overall dimensions , integrated sharpener
Notes: Skullcrasher / Hammer in stainless steel and holes for wrist strap or to be used with a pole to create a spear

Gerber - LMF II Infantry Black - 1629 - knife

After two years of collaboration with the expert military instructor Frank Heyl the Gerber is happy to bring to market what they define as the most resistant of the military knives / survival as never costruiti.Il knife is in fact designed not only to be extremely agile and rapid changes in grip , but also rugged enough to pierce the fuselage of a plane but also simply be used as a hammer, frangivetri or throwing knife .

Intended Use: Military

Type of production : industrial
Blade: Stainless steel 12C27
Treatment Blade: TiNi - Titanium Nitride
Production Lama USA
Handle material: non-slip fiberglass and nylon
Blade length : 125mm .
Blade Thickness: 4mm .
Length closed: -
Total length : 275mm .
Balance: backward 3cm .
Weight: 330g .
Closing: -
Clip: -
Sheath: Nylon and fire retardant polymers slip , multi- attacks SPRINGS system , ultra-thin to limit the overall dimensions , integrated sharpener
Notes: Skullcrasher / Hammer in stainless steel and holes for wrist strap or to be used with a pole to create a spear.