New Arrivals 2026: new knives, LED flashlights and outdoor & kitchen gear
-
Buck - 184 Buckmaster - 1986 Vintage Iconic Knife - PRIVATE COLLECTION - knife
KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory
The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.
Intended Use: Sports / Collectible
Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collectionBU-184-1986-CP€0.00Only 0 leftOnly 0 left
Out of stock -
Sog - Recon Government S21 rare knife - blued blade - Made in Japan - PRIVATE COLLECTION
KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in excellent condition
* Availability Discontinued
* Sharpening: Factory edge
* Blade marks: No
* Handle marks: No
* Box: -
* Sheath: Present - Original
* Manuals, Certificates and Warranty: -
* Checked and certified by our internal laboratoryThe SOG Recon Government S21 is an extremely rare variant of the Government model, produced between the 1990s and early 2000s, when SOG was among the world reference brands in outdoor and military cutlery. This version stands out for its dark blade finish.
Unlike the standard Government S13 in stainless steel, the Recon Government uses SK-5 carbon steel, required for the gun-blued treatment, not applicable to stainless steels. This makes it a technically different model.
Produced as an alternative variant of the series, today it is considered an extremely rare knife with almost no availability on the collector market.
Technology and materials
SK-5 steel blade with gun-blued finish that reduces reflections and protects the surface. Hardness 57-58 HRC for a good balance between strength and sharpenability. Black Kraton handle for a secure grip.
Solid construction with steel guard and pommel, consistent with the Government series for heavy-duty use.
Technical specs
Blade: Plain edge, gun-blued finish
Steel: SK-5 carbon steel
Hardness: 57-58 HRC
Handle: Black Kraton
Blade length: 15,9 cm
Total length: 28,6 cm
Blade thickness: 4,6 mm
Weight: approx. 240 g
Sheath: Nylon
Production: Japan
Product code: S21
Production period: 1990 - 2002
Discontinued model, among the rarest in the SOG Government series.SOG-S21AP€0.00Only 0 leftOnly 0 left
Out of stock -
Bawidamann Blades - POGN - Single Edge CPM-CruWear & Paracord - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Not supplied by manufacturer
* Sheath: Present
* Manuals, Certificates, and Warranties: Not supplied by manufacturer
* Checked and certified by our in-house laboratoryBawidamann Blades is a small, 100% American, family-owned company founded and run by Ben Bawidamann in Ohio. The brand stands out for its production of tactical and serious-use knives, designed for operators (soldiers, law enforcement, instructors) as well as EDC (Every Day Carry) enthusiasts or fans of sturdy blades.
The brand's philosophy revolves around unique and functional designs with distinctive and often aggressive aesthetics, with ideas that originate from the operational world and the designer's personal vision. The blades are made from high-quality steel, and many models feature special details such as custom finishes and ergonomic handles.
Bawidamann is not an industrial manufacturer: many knives are produced in limited quantities or small batches available only through the manufacturer's website, making them difficult to find in Europe and highly sought after by collectors.
Intended use: Collection/Sports
Type of production: Midtech
Country of production: USA
Blade: full tang in CPM-CruWear steel at 64HRC
Blade finish: Stonewashed
Handle: Paracord
Blade length: 98mm.
Blade thickness: 4mm.
Total length: 203mm.
Weight: 114g.
Sheath: Boltaron, with rigid belt loop, M.O.L.L.E. compatible.
Packaging: -
Notes: knife previously purchased from a private collectionBB-POGN-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Bawidamann Blades - GUNNR - CPM-S35VN & Black G10 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Not supplied by manufacturer
* Sheath: Present
* Manuals, Certificates, and Warranties: Not supplied by manufacturer
* Checked and certified by our in-house laboratoryBawidamann Blades is a small, 100% American, family-owned company founded and run by Ben Bawidamann in Ohio. The brand stands out for its production of tactical and serious-use knives, designed for operators (soldiers, law enforcement, instructors) as well as EDC (Every Day Carry) enthusiasts or fans of sturdy blades.
The brand's philosophy revolves around unique and functional designs with distinctive and often aggressive aesthetics, with ideas that originate from the operational world and the designer's personal vision. The blades are made from high-quality steel, and many models feature special details such as custom finishes and ergonomic handles.
Bawidamann is not an industrial manufacturer: many knives are produced in limited quantities or small batches available only through the manufacturer's website, making them difficult to find in Europe and highly sought after by collectors.
Intended use: Collection/Sports
Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade finish: Stonewashed
Handle: G10 by VZ Grip
Blade length: 118mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 217 g.
Sheath: Boltaron, with rigid belt loop, M.O.L.L.E. compatible.
Packaging: -
Notes: knife previously purchased from a private collection.BB-GUNNR-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Benchmade - Skirmish Titanium Knife 630 - USED - knife
KNIFE RETIRED FROM A PRIVATE COLLECTION
Type: Previously Purchased
Condition: USED
Commercial availability: No
Sharpening: Re-sharpened by our laboratory
Blade condition: in excellent condition
Handle condition: numerous marks and scratches on both sides
Manuals, Certificates and Warranties: Without certificates
Inspected and Certified by our internal laboratoryDesigned by custom maker Neil Blackwood and manufactured by Benchmade before its definitive removal from the catalog, the 630 Skirmish is now considered a true cult object in tactical and collectible knife making.This used example features a CPM S30V stainless steel blade professionally re-sharpened by our laboratory and solid titanium scales showing evident signs of wear on both sides.A large and fully functional knife, intended for those who want to handle a high-end piece without focusing too much on aesthetics. Even in this configuration, the Skirmish remains an extremely robust, rare and highly desired cutting tool.
Intended use: Collection - Heavy duty use
Production type: Discontinued industrial production
Country of manufacture: United States
Blade: CPM S30V stainless steel - re-sharpened - HRC not declared
Blade finish: Satin - re-sharpened
Handle: Solid anodized titanium, marked on both sides
Blade length: 110 mm
Blade thickness: 4 mm
Closed length: 135 mm
Total length: 245 mm
Closed thickness: 12.5 mm
Weight: 189 g
Lock: Titanium Frame Lock
Clip: Steel, tip-down, non-reversible
Packaging: without packaging
Notes: Discontinued model - used with re-sharpened blade and marked scales - high rarity on the Benchmade secondary marketBM-630CP-US€0.00Only 0 leftOnly 0 leftOut of stock -
McNees Knives - MAC2 3.5" Fastback - Matte SW CPM-Magnacut & Bronze Titanium - PRIVATE COLLECTION - Knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Origin: Retired from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: 2023 model, currently out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house labMcNees Knives is an independent American company based in Vernon, Alabama, specializing in the production of high-quality folding knives, fixed blades, and EDC equipment, made entirely in the United States. For over fifteen years, the company has been building strong relationships with customers, partners, and suppliers who share the same values of reliability, passion, and attention to detail.
Today, McNees Knives continues to grow, offering some of the best knives and EDC accessories on the market, backed by customer service that is considered among the best in the industry. Entering the world of McNees means choosing quality, craftsmanship, and a brand that truly puts the customer first.
Intended use: Sports/Tactical
Type of production: MidTech
Country of production: USA
Blade: CPM-MagnaCut steel
Blade treatment: Matte Stonewashed
Handle: Bronze-colored anodized titanium
Blade length: 87mm.
Blade thickness: 3.8mm.
Closed length: 107 mm.
Total length: 194 mm.
Weight: 122 g.
Lock: Frame Lock
Clip: bronze-colored anodized titanium, removable
Packaging: cardboard box with McNees logos, warranty certificate with technical specifications
Notes: previously purchased knife from a private collectionMCN014-CP€0.00Only 0 leftOnly 0 leftOut of stock
