New Arrivals 2026: new knives, LED flashlights and outdoor & kitchen gear

The NITECORE SUMMIT Air is a compact and lightweight power bank designed for outdoor use in extreme environmental conditions. With a stated capacity of 8,000 mAh, it provides a practical solution for keeping smartphones, action cameras, electronic devices and other accessories powered during activities such as skiing, ski touring, mountaineering and ice climbing.

Designed for winter use, the SUMMIT Air can be used while discharging at temperatures as low as -40 °C. Its IPX8 waterproof rating also provides a high level of water resistance, making it suitable for snow, rain and challenging weather conditions.

The two USB-C ports allow up to two devices to be powered simultaneously, while the maximum output power of 22.5 W supports fast charging protocols including PD, QC 3.0 and SCP.

Measuring just 92 × 41 × 21 mm and weighing approximately 135 g, the NITECORE SUMMIT Air is easy to carry and is a practical solution for anyone looking for a reliable power source during outdoor activities.

Key Features

• Capacity: 8,000 mAh
• Maximum output power: 22.5 W
• 2 USB-C ports
• Supports PD, QC 3.0 and SCP protocols
• Usable while discharging down to -40 °C
• IPX8 waterproof rating
• Compact dimensions: 92 × 41 × 21 mm
• Weight: approximately 135 g
• Integrated RGB indicators
• Charging cable with lanyard included
• Ideal for outdoor and winter activities

Technical Specifications

• Brand: NITECORE
• Model: SUMMIT Air
• Model code: NCPB0501
• Type: Power bank
• Battery: Li-ion
• Stated capacity: 8,000 mAh
• Rated capacity: 4,700 mAh (5 V / 3 A)
• Rated energy: 28.08 Wh
• Typical energy: 28.8 Wh
• USB-C input: 5 V / 2 A; 9 V / 2.22 A; 12 V / 1.67 A
• Maximum input power: 20 W
• Outputs: 2 × USB-C
• Output per port: 5 V / 3 A; 9 V / 2.22 A; 10 V / 2.25 A; 12 V / 1.67 A
• Maximum output power: 22.5 W
• Simultaneous output: 5 V / 3 A – 15 W max
• Supported protocols: PD, QC 3.0, SCP
• Water resistance: IPX8
• Discharge temperature: -40 °C to +60 °C
• Charging temperature: 0 °C to +50 °C
• Dimensions: 92 × 41 × 21 mm
• Weight: 135 g ± 5 g
• Included accessories: charging cable with lanyard

Package Contents

• NITECORE SUMMIT Air
• Charging cable with lanyard

Combining exceptional performance with hunters’ preferences, we are proud to present the latest folding knife in our Hunt collection: the new 15090 SlipRidge.

Built around a wide 3.5" (8.9 cm) modified clip-point blade made of MagnaCut stainless steel and sharpened using the exclusive, ultra-high-precision SelectEdge process, the SlipRidge features a full-liner construction with user-removable Stabilized Wood scales. This design conceals the central pivot to prevent the entry of dirt and debris, while maintaining a smooth opening action and making it easy to clean or customize the knife.

The pinch-point grooves allow for cutting tasks with the utmost precision. Equipped with our next-generation AXIS Lock technology for superior durability and reliability, the SlipRidge is the perfect folding pocket knife to pair with the rest of the SlipRidge collection, including the fixed-blade model and the SlipRidge Hook.

Intended use: hunting / sports

Production type: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut steel, 60/62 HRC
Blade finish: Stonewashed
Handle: Stabilized wood
Blade length: 89 mm
Blade thickness: 2.9 mm
Closed length: 120 mm
Overall length: 209 mm
Weight: 106 g
Closure system: Axis Lock (crossbar lock)
Clip: removable and reversible, stainless steel with BlackOxide finish, deep-pocket style
Packaging: Cardboard box with Benchmade logos
Notes: Part of the SlipRidge hunting knife collection

Combining exceptional performance with hunters’ preferences, we are proud to present the latest folding knife in our Hunt collection: the new 15090-01 SlipRidge.

Built around a wide 3.5" (8.9 cm) modified clip-point blade made of MagnaCut stainless steel and sharpened using the exclusive, ultra-high-precision SelectEdge process, the SlipRidge features a full-liner construction with user-removable Rust Orange G10 scales. This design conceals the central pivot to prevent the entry of dirt and debris, while maintaining smooth opening action and making it easy to clean or customize the knife.

The pinch-point grooves allow for cutting tasks with the utmost precision. Equipped with our next-generation AXIS Lock technology for superior durability and reliability, the SlipRidge is the perfect folding pocket knife to pair with the rest of the SlipRidge collection, including the fixed-blade model and the SlipRidge Hook.

Intended use: hunting / sports

Production type: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut steel, 60/62 HRC
Blade finish: Stonewashed
Handle: G10
Blade length: 89 mm
Blade thickness: 2.9 mm
Closed length: 120 mm
Overall length: 209 mm
Weight: 118 g
Closure system: Axis Lock (crossbar lock)
Clip: removable and reversible, stainless steel with BlackOxide finish, deep pocket style
Packaging: Cardboard box with Benchmade logos
Notes: Part of the SlipRidge hunting knife collection

Rethink your hunting kit. Designed to be the heart of your big-game gear, the new 15650 SlipRidge fixed-blade knife is built to offer maximum versatility in the field.

Crafted from MagnaCut® super stainless steel and sharpened using the exclusive, ultra-precise SelectEdge process, this agile fixed-blade knife features an ergonomic Stabilized Wood handle designed to prevent twisting and ensure maximum control, as well as a deep finger choil that enhances safety. The pinch-point contours allow for precision work by taking advantage of the high tip and wide belly of the 3.8" (9.6 cm) drop-point blade—the ideal length for working with large hides without sacrificing the agility needed in tight spaces.

Supplied with a modular Boltaron sheath for customizable carry options and designed to accommodate the SlipRidge Hook (sold separately).

Intended use: hunting / all-around utility

Manufacturing type: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut steel, 60/62 HRC
Blade finish: Stonewashed
Handle: Stabilized wood
Blade length: 94 mm.
Blade thickness: 2.9 mm.
Overall length: 206 mm.
Weight: 103 g.
Sheath: Boltaron, modular
Packaging: Cardboard box with Benchmade logos
Notes: Designed to be paired with the SlipRidge Hook 11OR skinning hook

Rethink your hunting kit. Designed to be the heart of your big-game gear, the new 15650-01 SlipRidge fixed-blade knife is built to offer maximum versatility in the field.

Crafted from MagnaCut® super stainless steel and sharpened using the exclusive, ultra-precise SelectEdge process, this agile fixed-blade knife features an ergonomic Rust Orange G10 handle designed to prevent twisting and ensure maximum control, as well as a deep finger choil that enhances safety. The pinch-point contours allow for precision work by taking advantage of the high tip and wide belly of the 3.8" (9.6 cm) drop-point blade: the ideal length for working on large hides without sacrificing the agility needed in tight spaces.

Supplied with a modular Boltaron sheath for customizable carry options and designed to accommodate the SlipRidge Hook (sold separately).

Intended use: hunting / all-around utility

Manufacturing type: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut steel, 60/62 HRC
Blade finish: Stonewashed
Handle: G10
Blade length: 94 mm.
Blade thickness: 2.9 mm.
Overall length: 206 mm.
Weight: 124 g.
Sheath: Boltaron, modular
Packaging: Cardboard box with Benchmade logos
Notes: Designed to be paired with the SlipRidge Hook 11OR skinning hook

Clean cuts and maximum precision. The 11OR SlipRidge Gut Hook was designed to be the first tool you reach for when processing game. Its configuration allows you to open the abdominal cavity while minimizing the risk of accidentally piercing internal organs, or to start from the inside of the legs to remove the skin without damaging the meat underneath.

Made of 440C stainless steel with a Rust Orange Cerakote finish, the Gut Hook comes with a Boltaron OD Green sheath, designed to be modular and compatible with the 15650 SlipRidge fixed blade.

Intended Use: skinning tool for hunting

Manufacturing Type: Industrial
Country of Manufacture: USA
Blade: 440C stainless steel
Blade Finish: CeraKote
Handle: 440C stainless steel
Blade Thickness: 3.18 mm
Overall Length: 122 mm
Weight: 52 g
Sheath: Boltaron, modular
Packaging: Cardboard box with Benchmade logos
Notes: Designed to pair with the 15650 and 15650-01 series SlipRidge fixed-blade knives

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual; previously purchased and used
* Condition: Mechanically in excellent condition; cosmetically in acceptable condition; shows several signs of use on the blade finish, liners, and handle that do not compromise its use in any way
* Commercially available: Discontinued
* Sharpness: Factory-sharpened; could be improved
* Marks on blade: Several signs of use and wear
* Marks on handle: Several signs of use and wear
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

The Alpha Three model, an evolution of the Alpha Two, was designed by Dietmar Pohl in collaboration with police and special forces instructors from the H3 Training Division. This knife is engineered for heavy-duty use; thanks to its substantial size, it is well-suited for use while wearing gloves.

Intended Use: Utility / Multi-purpose
Manufacturing Type: Industrial
Blade: D2 steel
Blade Finish: Burnished
Handle: Zytel with internal burnished stainless steel liners
Blade Length: 113 mm
Blade Thickness: 5 mm
Overall Length: 260 mm
Thickness when closed: 18 mm
Balance: 1 cm rearward from the guard
Weight: 260 g
Closure: Back Lock
Packaging: -
Notes: equipped with a skull crusher / glass breaker on the back—knife previously purchased and used, from a private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available: No
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Provenance: 2008 knife acquired from a private seller, previously purchased
* Condition: Overall in excellent mechanical condition and good cosmetic condition; has a few small spots of oxidation on the carbon steel blade and some minor signs of wear on the guard and handle
* Commercially available: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: Small spots of oxidation
* Marks on the handle: A few minor signs of wear on the guard and handle
* Box: Sold in a nylon pouch with a zipper and embroidered manufacturer’s logos
* Sheath: Included and in excellent condition
* Manuals, Certificates, and Warranties: Warranty certificate with technical specifications and date of manufacture
* Inspected and certified by our in-house laboratory

Intended use: Collectible/sporting

Production type: Handcrafted
Country of origin: Cambodia
Blade: DNH7 carbon steel, selectively hardened to 40/60 HRC
Blade finish: Polished, with brut de forge sections
Handle: Buffalo horn
Blade length: approximately 135 mm.
Blade thickness: approximately 5.5 mm.
Overall length: approximately 247 mm.
Weight: approximately 178 g.
Lock: set back 1.5 cm
Sheath: leather
Notes: Previously purchased knife, from a private collection

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Mechanically in excellent condition; cosmetically in good condition. Shows minor scuffs on the G10 handle due to the passage of time and limited use of the knife.
* Availability on the market: Knife from 2000, discontinued, particularly rare
* Sharpening: Professionally resharpened by the previous owner
* Marks on blade: Minor cosmetic abrasions caused by age and use of the knife, albeit limited
* Marks on handle: A few minor marks caused by age and use of the knife, albeit limited
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

Intended use: Tactical/Military

Manufacturing type: Industrial
Blade: 154CM stainless steel
Blade finish: Titanium nitriding
Country of manufacture: USA
Handle: G-10 with titanium inlays
Blade length: 90 mm.
Blade thickness: 3 mm.
Closed length: 125 mm.
Overall length: 213 mm.
Weight: 128 g.
Closure: Liner Lock
Clip: burnished stainless steel, removable
Notes: Knife from 2000, discontinued, previously purchased, from a private collection

PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: In excellent mechanical condition and in acceptable cosmetic condition, which does not limit its practical use
* Commercially available: Discontinued
* Sharpness: Factory-sharpened
* Marks on blade: Various cosmetic marks from use and aging
* Marks on handle: Various cosmetic marks from use and aging
* Box: -
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and certified by our in-house laboratory

Intended use: Multipurpose emergency and survival knife

Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co stainless steel
Finish: Burnished
Handle: Anodized Anticorodal aluminum alloy
Blade length: 85 mm.
Blade thickness: 2.5 mm.
Overall length: 210 mm.
Weight: 212 g.
Locking system: Liner Lock on the blade and wood saw; push-button lock on the cable cutter / belt cutter
Packaging: Cardboard box with Extrema Ratio logos and manufacturer’s certificates
Notes: Quick-release emergency cable/belt cutter blade  - stainless steel glass breaker - wood saw - 2013 model, now discontinued - previously purchased knife from a private collection

KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Like new, never used, but missing the original packaging
* Commercially available: Discontinued
* Edge: Factory-sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Missing - Will be shipped in a Spartan Blades box, but different from the original one
* Sheath: -
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory

After more than 40 years of service in the U.S. Army Special Forces, Curtis Iovito and Mark Carey founded Spartan Blades LLC in North Carolina.

Curtis, who had been designing and crafting knives for his friends in the special forces for years, and Mark, who had always dealt with military and tactical gear during his time with the “Green Berets,” decided to combine their expertise and passion with the goal of building innovative and functional knives using the highest-quality materials and manufactured entirely in the United States.

Intended Use: EDC / Sports

Production Type: Midtech
Country of Manufacture: USA
Blade: CPM-S35VN stainless steel
Blade Finish: Stonewash
Handle: Stonewashed Titanium
Blade Length: 48 mm.
Blade thickness: 2 mm.
Closed length: 74 mm
Overall length: 121 mm.
Closed thickness: 7 mm
Weight: 36 g.
Closure: Integral Frame Slipjoint (two-handed opening and closing without blade lock)
Clip: Titanium
Packaging: Cardboard box with Spartan Blades logos
Notes: Winner of the 2014 Blade Show award for “Most Innovative American-Made Knife of the Year” – Knife previously purchased and withdrawn from a private collection

Explore the power of modernity and boldness with the OXYLOS FX-616 OL knife. Embodying the quintessence of contemporary combat readiness and aggressive design, this tool is much more than just a bushcraft knife—it’s an icon of innovation. Featuring an N690Co stainless steel blade that promises durability and strength, paired with a stone-washed surface treatment for a rugged finish, the OXYLOS is ready to tackle any challenge.

Its compact design and futuristic aesthetic capture the eye, embodying the essence of contemporary technology. The black micarta handle offers a secure and comfortable grip, while the stainless steel screws ensure sturdiness and durability. Complete with a leather sheath for safe and stylish transport, the OXYLOS is ready to be the ideal companion for outdoor adventure enthusiasts.

With a total length of 24 cm, a 13 cm blade, and a thickness of 5 mm, this knife is ready to tackle any challenge you may encounter on your outdoor adventures. Masterfully crafted in Italy, the OXYLOS is more than just a knife: it’s an experience, a symbol of exceptional performance and timeless style.

Intended Use: Hunting / Hiking / Bushcraft / Utility

Manufacturing Type: Industrial
Country of Manufacture: Italy
Blade: Full tang, N690Co stainless steel
Blade Finish: Satin
Handle: Olive wood
Blade Length: 130 mm.
Blade thickness: 5 mm.
Overall length: 240 mm.
Balance: On the guard
Weight: 273 g.
Sheath: Leather, belt-mounted, ambidextrous, for horizontal or vertical carry
Packaging: Cardboard box with Fox logos
Notes: -

The Benchmade 275-05 Adamas takes one of the most rugged models in the Benchmade catalog to an even higher level, combining extreme performance with premium materials.

The drop-point blade made of CPM-MagnaCut steel offers an excellent balance between edge retention, corrosion resistance, and toughness, while the marbled carbon fiber handle ensures lightness, sturdiness, and a particularly refined aesthetic.

The internal construction utilizes steel liners with an FDE PVD coating, maintaining the legendary ruggedness of the Adamas family. A refined yet uncompromising version, designed for those who want an extremely durable knife with premium finishes and materials.

Intended Use: Utility / Hiking

Manufacturing Type: Industrial
Country of Manufacture: USA
Blade: CPM-MagnaCut tool steel, 63/65 HRC
Blade finish: Satin
Handle: Marble Carbon Fiber with FDE stainless steel scales
Blade length: 97 mm.
Blade thickness: 3.6 mm.
Closed length: 132 mm.
Overall length: 227 mm.
Handle thickness: 16 mm.
Weight: 176 g.
Lock: AxisLock
Clip: Deep Pocket, removable and reversible, made of stainless steel with an FDE finish
Packaging: Cardboard box with Benchmade logos, nylon sheath with M.O.L.L.E.-compatible belt loops
Notes: Premium version of the Adamas model

The Benchmade 491BK-02 Lowden offers a darker, more sophisticated take on the series’ distinctive design, pairing a black CPM-S90V steel blade with an elegant milled black G10 handle, accented with Burnt Copper hardware.

The flipper-style opening mechanism with AXIS® Lock on ball bearings ensures an extremely smooth and responsive action, while the spear-point profile combines modern lines, cutting precision, and excellent edge retention.

A refined, high-performance folding knife, designed for those seeking top-tier materials and a strong aesthetic presence.

Intended Use: Sports/EDC

Production Type: Industrial
Country of Manufacture: USA
Blade: CPM-S90V stainless steel
Blade Finish: Black CeraKote
Handle: CNC-machined G10
Blade Length: 70.9mm.
Blade Thickness: 2.3mm.
Closed length: 102 mm.
Overall length: 173 mm.
Closed thickness: 12.75 mm.
Weight: 72.3 g.
Lock: AXIS Lock
Clip: Removable and reversible, stainless steel with black PVD coating
Packaging: Cardboard box with Benchmade logos
Notes: -

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like New
* Commercial Availability: No - Discontinued
* Sharpening: Original Factory Edge
* Marks on Blade: None
* Marks on Handle: None
* Box: Original, in like-new condition
* Manuals, Certificates and Warranty Documents: Benchmade certificates
* Inspected and Certified by our in-house laboratory

The Benchmade Foray 698-181 Gold Class is one of the most prestigious interpretations of the compact Foray, produced by Benchmade as a Limited Edition from the Gold Class series, the line dedicated to the most exclusive models in the American manufacturer's production.

Gold Class represents the pinnacle of the Benchmade philosophy: selected models are reinterpreted using premium materials, special machining and superior finishes, transforming a production knife into an object primarily intended for collecting.

The 698-181 combines a spectacular stainless Damasteel blade with Loki pattern with a handle made of marbled carbon fiber with mother-of-pearl inlays, creating a striking contrast between technical materials and natural details that makes each example visually distinctive.

One of the most sought-after versions of the Benchmade Foray

The Foray was conceived as a compact and elegant folder, characterized by balanced proportions and Benchmade's renowned AXIS Lock mechanism.

In the 698-181 Gold Class version, the technical foundation of the model is elevated through significantly more refined materials: Damasteel, marbled carbon fiber, mother of pearl, dark-finished components and anodized details.

The result is a knife that retains dimensions perfectly suited to EDC use, but whose materials, rarity and positioning place it primarily in the world of Benchmade collecting.

Loki Damasteel Blade

The blade measures approximately 82 mm and is made from stainless Damasteel with Loki pattern, with a declared hardness of approximately 58-60 HRC.

Damasteel is produced through the processing of different stainless steels using advanced metallurgical techniques that create the characteristic layered pattern visible across the blade surface.

The Loki pattern used on this version creates a particularly pronounced design and makes every blade slightly different from an aesthetic point of view.

The drop-point profile also preserves the functional character of the original Foray, offering a versatile and well-balanced geometry.

Marbled Carbon Fiber and Mother of Pearl

The handle uses marbled carbon fiber, a lightweight and structurally strong material characterized by an irregular, three-dimensional texture.

The handle scales incorporate mother-of-pearl inlays, producing different reflections and shades depending on the lighting and viewing angle. Historical specifications for this model identify these inlays as Black Lip Mother of Pearl.

It is precisely this combination of technical carbon fiber and natural material that gives the 698-181 a personality clearly distinct from standard Foray versions.

Gold Class Details

The 698-181 version also features a number of details specific to the Gold Class configuration:

• Loki Pattern Damasteel blade
• Marbled Carbon Fiber handle
• Black Lip Mother of Pearl inlays
• Steel liners with DLC coating
• DLC-coated hardware
• Anodized thumb stud
• Anodized barrel spacers
• Reversible tip-up deep-carry clip with DLC coating
• AXIS Lock locking system

These features belong to the 2018 Gold Class configuration of the model, now discontinued and particularly appealing to Benchmade collectors.

Technical Specifications

Manufacturer: Benchmade
Model: Foray 698-181
Series: Gold Class Limited Edition
Year: 2018
Production Status: Discontinued
Production: Industrial
Country of Manufacture: USA
Type: Folding knife
Opening: Manual via thumb stud
Lock: AXIS Lock
Blade Profile: Drop Point
Steel: Stainless Damasteel
Pattern: Loki
Hardness: approximately 58-60 HRC
Blade Length: approximately 82 mm
Blade Thickness: approximately 3.5 mm
Closed Length: approximately 105 mm
Overall Length: approximately 186 mm
Handle Thickness: approximately 14 mm
Weight: approximately 98 g
Handle: marbled carbon fiber with Black Lip Mother of Pearl inlays
Liners: steel with DLC coating
Clip: reversible deep-carry, tip-up, DLC-coated steel
Pouch: Benchmade Gold Class fabric pouch

The Nitecore NWE10 is an ultra-compact electronic emergency whistle designed to generate a powerful acoustic signal of up to 126 dB without the need to blow into it.

It is designed for trekking, hiking, trail running, camping, mountaineering, boating, travelling and emergency kits, where it may be essential to quickly attract attention or signal your position even in conditions of fatigue, cold or physical difficulty.

Unlike a traditional whistle, the NWE10 generates its signal electronically: simply operate the power button to produce a powerful and repeatable acoustic signal, without using physical energy by continuously blowing into a whistle.

Acoustic output up to 126 dB

Despite its extremely compact dimensions, the Nitecore NWE10 can reach a declared sound pressure level of up to 126 dB.

The powerful acoustic output is designed to increase the possibility of being detected from a distance and provides valuable support in situations where your voice may not be sufficient or cannot be used for long periods.

Single and continuous acoustic signal

With the device switched off, a brief press of the button produces a single acoustic signal.

Holding the button down activates the continuous acoustic signal, which stops when the button is released.

This mode allows you to immediately attract attention while directly controlling the duration of the signal.

Automatic SOS mode

By holding the button down for approximately 10 seconds, the NWE10 automatically enters SOS mode.

The device then switches from the continuous signal to an automatic intermittent acoustic sequence, repeated approximately every 3 minutes.

This function is particularly useful in an emergency because it allows the device to continue signalling automatically without requiring the user to constantly hold down the control.

Beacon mode

During SOS operation, it is possible to switch to Beacon mode, providing an additional signalling mode designed to help locate the user.

No need to blow

One of the main advantages of the Nitecore NWE10 compared with a conventional whistle is its fully electronic operation.

In an emergency situation, after many hours of walking or in conditions of cold, stress or fatigue, repeatedly blowing into a whistle can become difficult.

With the NWE10 you simply press a button: the electronics generate the acoustic signal for you, reducing the physical effort required to continue attracting attention.

Up to 80 hours runtime

The built-in Li-ion battery provides a declared runtime of up to 80 hours, an especially important feature for a device intended for safety and outdoor use.

To keep the battery in good condition during long periods of inactivity, Nitecore recommends periodically recharging the device.

USB-C charging

The NWE10 features a modern USB-C port and can be recharged using compatible chargers, power banks and other USB power sources.

Charging input is 5V / 1A and a full recharge takes approximately 2 hours when using a compatible power adapter.

The device can also be used while charging.

Battery level indicator

Four indicator lights allow you to quickly check the remaining battery capacity:

• 4 indicators on: 76% - 100%
• 3 indicators on: 51% - 75%
• 2 indicators on: 26% - 50%
• 1 indicator on: 0% - 25%

When only one indicator remains illuminated, it is recommended to recharge the product as soon as possible.

Compact and lightweight

With dimensions of approximately 65 x 33 x 32 mm and a weight of only 38 g, the Nitecore NWE10 can easily be added to personal equipment without significantly increasing weight or bulk.

It can be carried in a backpack, trekking equipment, an EDC kit, a vehicle or any emergency preparedness kit.

Ideal for

• Trekking and hiking
• Trail running and ultratrail
• Mountaineering and outdoor activities
• Camping and bivouacking
• Boating and fishing
• Travel
• Emergency kits
• EDC equipment

Main features

• Electronic emergency whistle
• Sound output up to 126 dB
• No need to blow
• Single acoustic signal
• Continuous acoustic signal
• Automatic SOS mode
• Beacon mode
• Built-in Li-ion battery
• Runtime up to 80 hours
• USB-C charging
• 5V / 1A input
• Charging time approximately 2 hours
• 4-level battery indicator
• Dimensions: approximately 65 x 33 x 32 mm
• Weight: approximately 38 g

Technical specifications

Brand: Nitecore
Model: NWE10
Type: Electronic emergency whistle
Maximum sound output: 126 dB
Modes: Single, Continuous, SOS, Beacon
Maximum runtime: up to 80 hours
Battery: Built-in rechargeable Li-ion battery
Charging: USB-C
Input: 5V / 1A
Charging time: approximately 2 hours
Dimensions: approximately 65 x 33 x 32 mm
Weight: approximately 38 g
Colour: Green
Operating temperature: -40°C to +35°C
Storage temperature: -40°C to +45°C

Warnings

The Nitecore NWE10 produces an extremely powerful acoustic signal. Avoid prolonged use close to the ears to prevent possible hearing damage.

Do not cover the sound outlet during operation and do not immerse the device in water or other liquids.

The product contains a built-in Li-ion battery and must not be disassembled, punctured, crushed, burned or modified.

Nitecore NWE10: small enough to carry, powerful when needed

The Nitecore NWE10 reinterprets one of the simplest and most traditional outdoor safety tools, transforming it into a modern, rechargeable electronic device equipped with automatic signalling modes.

126 dB sound output, only 38 grams, SOS and Beacon modes, up to 80 hours runtime and USB-C charging make it an extremely interesting accessory for outdoor enthusiasts or anyone wishing to add a simple and immediate emergency signalling device to their equipment.

A device that takes up very little space and that you hopefully never have to use in a real emergency, but which can become extremely important when you need to make yourself heard.

The Nitecore NWE10 is an ultra-compact electronic emergency whistle designed to generate a powerful acoustic signal of up to 126 dB without the need to blow into it.

It is designed for trekking, hiking, trail running, camping, mountaineering, boating, travelling and emergency kits, where it may be essential to quickly attract attention or signal your position even in conditions of fatigue, cold or physical difficulty.

Unlike a traditional whistle, the NWE10 generates its signal electronically: simply operate the power button to produce a powerful and repeatable acoustic signal, without using physical energy by continuously blowing into a whistle.

Acoustic output up to 126 dB

Despite its extremely compact dimensions, the Nitecore NWE10 can reach a declared sound pressure level of up to 126 dB.

The powerful acoustic output is designed to increase the possibility of being detected from a distance and provides valuable support in situations where your voice may not be sufficient or cannot be used for long periods.

Single and continuous acoustic signal

With the device switched off, a brief press of the button produces a single acoustic signal.

Holding the button down activates the continuous acoustic signal, which stops when the button is released.

This mode allows you to immediately attract attention while directly controlling the duration of the signal.

Automatic SOS mode

By holding the button down for approximately 10 seconds, the NWE10 automatically enters SOS mode.

The device then switches from the continuous signal to an automatic intermittent acoustic sequence, repeated approximately every 3 minutes.

This function is particularly useful in an emergency because it allows the device to continue signalling automatically without requiring the user to constantly hold down the control.

Beacon mode

During SOS operation, it is possible to switch to Beacon mode, providing an additional signalling mode designed to help locate the user.

No need to blow

One of the main advantages of the Nitecore NWE10 compared with a conventional whistle is its fully electronic operation.

In an emergency situation, after many hours of walking or in conditions of cold, stress or fatigue, repeatedly blowing into a whistle can become difficult.

With the NWE10 you simply press a button: the electronics generate the acoustic signal for you, reducing the physical effort required to continue attracting attention.

Up to 80 hours runtime

The built-in Li-ion battery provides a declared runtime of up to 80 hours, an especially important feature for a device intended for safety and outdoor use.

To keep the battery in good condition during long periods of inactivity, Nitecore recommends periodically recharging the device.

USB-C charging

The NWE10 features a modern USB-C port and can be recharged using compatible chargers, power banks and other USB power sources.

Charging input is 5V / 1A and a full recharge takes approximately 2 hours when using a compatible power adapter.

The device can also be used while charging.

Battery level indicator

Four indicator lights allow you to quickly check the remaining battery capacity:

• 4 indicators on: 76% - 100%
• 3 indicators on: 51% - 75%
• 2 indicators on: 26% - 50%
• 1 indicator on: 0% - 25%

When only one indicator remains illuminated, it is recommended to recharge the product as soon as possible.

Compact and lightweight

With dimensions of approximately 65 x 33 x 32 mm and a weight of only 38 g, the Nitecore NWE10 can easily be added to personal equipment without significantly increasing weight or bulk.

It can be carried in a backpack, trekking equipment, an EDC kit, a vehicle or any emergency preparedness kit.

Ideal for

• Trekking and hiking
• Trail running and ultratrail
• Mountaineering and outdoor activities
• Camping and bivouacking
• Boating and fishing
• Travel
• Emergency kits
• EDC equipment

Main features

• Electronic emergency whistle
• Sound output up to 126 dB
• No need to blow
• Single acoustic signal
• Continuous acoustic signal
• Automatic SOS mode
• Beacon mode
• Built-in Li-ion battery
• Runtime up to 80 hours
• USB-C charging
• 5V / 1A input
• Charging time approximately 2 hours
• 4-level battery indicator
• Dimensions: approximately 65 x 33 x 32 mm
• Weight: approximately 38 g

Technical specifications

Brand: Nitecore
Model: NWE10
Type: Electronic emergency whistle
Maximum sound output: 126 dB
Modes: Single, Continuous, SOS, Beacon
Maximum runtime: up to 80 hours
Battery: Built-in rechargeable Li-ion battery
Charging: USB-C
Input: 5V / 1A
Charging time: approximately 2 hours
Dimensions: approximately 65 x 33 x 32 mm
Weight: approximately 38 g
Colour: Green
Operating temperature: -40°C to +35°C
Storage temperature: -40°C to +45°C

Warnings

The Nitecore NWE10 produces an extremely powerful acoustic signal. Avoid prolonged use close to the ears to prevent possible hearing damage.

Do not cover the sound outlet during operation and do not immerse the device in water or other liquids.

The product contains a built-in Li-ion battery and must not be disassembled, punctured, crushed, burned or modified.

Nitecore NWE10: small enough to carry, powerful when needed

The Nitecore NWE10 reinterprets one of the simplest and most traditional outdoor safety tools, transforming it into a modern, rechargeable electronic device equipped with automatic signalling modes.

126 dB sound output, only 38 grams, SOS and Beacon modes, up to 80 hours runtime and USB-C charging make it an extremely interesting accessory for outdoor enthusiasts or anyone wishing to add a simple and immediate emergency signalling device to their equipment.

A device that takes up very little space and that you hopefully never have to use in a real emergency, but which can become extremely important when you need to make yourself heard.

The Nitecore NWE10 is an ultra-compact electronic emergency whistle designed to generate a powerful acoustic signal of up to 126 dB without the need to blow into it.

It is designed for trekking, hiking, trail running, camping, mountaineering, boating, travelling and emergency kits, where it may be essential to quickly attract attention or signal your position even in conditions of fatigue, cold or physical difficulty.

Unlike a traditional whistle, the NWE10 generates its signal electronically: simply operate the power button to produce a powerful and repeatable acoustic signal, without using physical energy by continuously blowing into a whistle.

Acoustic output up to 126 dB

Despite its extremely compact dimensions, the Nitecore NWE10 can reach a declared sound pressure level of up to 126 dB.

The powerful acoustic output is designed to increase the possibility of being detected from a distance and provides valuable support in situations where your voice may not be sufficient or cannot be used for long periods.

Single and continuous acoustic signal

With the device switched off, a brief press of the button produces a single acoustic signal.

Holding the button down activates the continuous acoustic signal, which stops when the button is released.

This mode allows you to immediately attract attention while directly controlling the duration of the signal.

Automatic SOS mode

By holding the button down for approximately 10 seconds, the NWE10 automatically enters SOS mode.

The device then switches from the continuous signal to an automatic intermittent acoustic sequence, repeated approximately every 3 minutes.

This function is particularly useful in an emergency because it allows the device to continue signalling automatically without requiring the user to constantly hold down the control.

Beacon mode

During SOS operation, it is possible to switch to Beacon mode, providing an additional signalling mode designed to help locate the user.

No need to blow

One of the main advantages of the Nitecore NWE10 compared with a conventional whistle is its fully electronic operation.

In an emergency situation, after many hours of walking or in conditions of cold, stress or fatigue, repeatedly blowing into a whistle can become difficult.

With the NWE10 you simply press a button: the electronics generate the acoustic signal for you, reducing the physical effort required to continue attracting attention.

Up to 80 hours runtime

The built-in Li-ion battery provides a declared runtime of up to 80 hours, an especially important feature for a device intended for safety and outdoor use.

To keep the battery in good condition during long periods of inactivity, Nitecore recommends periodically recharging the device.

USB-C charging

The NWE10 features a modern USB-C port and can be recharged using compatible chargers, power banks and other USB power sources.

Charging input is 5V / 1A and a full recharge takes approximately 2 hours when using a compatible power adapter.

The device can also be used while charging.

Battery level indicator

Four indicator lights allow you to quickly check the remaining battery capacity:

• 4 indicators on: 76% - 100%
• 3 indicators on: 51% - 75%
• 2 indicators on: 26% - 50%
• 1 indicator on: 0% - 25%

When only one indicator remains illuminated, it is recommended to recharge the product as soon as possible.

Compact and lightweight

With dimensions of approximately 65 x 33 x 32 mm and a weight of only 38 g, the Nitecore NWE10 can easily be added to personal equipment without significantly increasing weight or bulk.

It can be carried in a backpack, trekking equipment, an EDC kit, a vehicle or any emergency preparedness kit.

Ideal for

• Trekking and hiking
• Trail running and ultratrail
• Mountaineering and outdoor activities
• Camping and bivouacking
• Boating and fishing
• Travel
• Emergency kits
• EDC equipment

Main features

• Electronic emergency whistle
• Sound output up to 126 dB
• No need to blow
• Single acoustic signal
• Continuous acoustic signal
• Automatic SOS mode
• Beacon mode
• Built-in Li-ion battery
• Runtime up to 80 hours
• USB-C charging
• 5V / 1A input
• Charging time approximately 2 hours
• 4-level battery indicator
• Dimensions: approximately 65 x 33 x 32 mm
• Weight: approximately 38 g

Technical specifications

Brand: Nitecore
Model: NWE10
Type: Electronic emergency whistle
Maximum sound output: 126 dB
Modes: Single, Continuous, SOS, Beacon
Maximum runtime: up to 80 hours
Battery: Built-in rechargeable Li-ion battery
Charging: USB-C
Input: 5V / 1A
Charging time: approximately 2 hours
Dimensions: approximately 65 x 33 x 32 mm
Weight: approximately 38 g
Colour: Green
Operating temperature: -40°C to +35°C
Storage temperature: -40°C to +45°C

Warnings

The Nitecore NWE10 produces an extremely powerful acoustic signal. Avoid prolonged use close to the ears to prevent possible hearing damage.

Do not cover the sound outlet during operation and do not immerse the device in water or other liquids.

The product contains a built-in Li-ion battery and must not be disassembled, punctured, crushed, burned or modified.

Nitecore NWE10: small enough to carry, powerful when needed

The Nitecore NWE10 reinterprets one of the simplest and most traditional outdoor safety tools, transforming it into a modern, rechargeable electronic device equipped with automatic signalling modes.

126 dB sound output, only 38 grams, SOS and Beacon modes, up to 80 hours runtime and USB-C charging make it an extremely interesting accessory for outdoor enthusiasts or anyone wishing to add a simple and immediate emergency signalling device to their equipment.

A device that takes up very little space and that you hopefully never have to use in a real emergency, but which can become extremely important when you need to make yourself heard.

The FOX Gabi EDC FX-451 DMB represents one of the most refined and distinctive interpretations of the Gabi family: a compact and lightweight folding knife designed for Everyday Carry, characterized by the combination of a black Dark Matter handle, stonewashed PVD blade and blue-anodized details.

The Gabi project was developed as an evolution of the renowned FOX Predator, a model originally designed with a strong tactical and operational character. FOX preserves its DNA of strength, reliability and practicality, while reinterpreting it in a slimmer, more compact and discreet platform specifically designed for everyday carry and use.

At the heart of the FX-451 DMB is a Niolox blade, hardened to 59-61 HRC. Its reduced thickness of just 2.5 mm provides a particularly effective balance between cutting performance, structural strength and light weight, keeping the knife agile and pleasant to use on a daily basis.

In this configuration, the blade features a refined black stonewashed PVD treatment. The combination of the PVD coating and stonewashed finish gives the surface a technical and sophisticated appearance, perfectly in keeping with the premium character of this version.

Opening is facilitated by the practical thumb stud, while the Crossbar Lock system allows smooth and intuitive blade operation. The mechanism can be operated without placing the fingers directly in the blade's closing path, making it particularly functional for everyday use.

The most distinctive visual feature of the FX-451 DMB is its black Dark Matter handle, which gives the knife a modern and exclusive personality. The distinctive texture of the material creates depth and visual variations that make the handle particularly attractive, while maintaining low weight and compact dimensions.

FOX creates an elegant color contrast through blue-anodized aluminium components: both the Crossbar Lock control and the standoffs feature this finish, introducing discreet color accents against the black handle and blade.

The hardware follows the same premium approach. The reversible clip is made from AISI 420 stainless steel with black PVD treatment, while the screws are made from AISI 303 with black PVD. The reversible clip further increases versatility for everyday carry.

With a 78 mm blade, a thickness of just 2.5 mm, an overall length of 188 mm and a weight of only 65 g, the Gabi FX-451 DMB combines refined materials, technical construction and remarkable lightness in a format perfectly suited to the EDC philosophy.

Entirely Made in Italy, the FOX Gabi FX-451 DMB is intended for those looking for a modern and technically capable folding knife while also seeking materials and finishes that stand out from more traditional EDC configurations. A particularly successful version for enthusiasts seeking a balance between functionality, lightness and visual exclusivity.

Intended use: Everyday Carry / Utility
Production type: Industrial
Brand: FOX Knives
Model: Gabi EDC FX-451 DMB
Country of manufacture: Italy
Opening/locking system: Crossbar Lock
Opening: Thumb Stud
Blade: Niolox
Hardness: 59-61 HRC
Blade finish: Black Stonewashed PVD
Blade length: 78 mm / 3.07"
Blade thickness: 2.5 mm / 0.10"
Overall length: 188 mm / 7.40"
Handle: Black Dark Matter
Crossbar Lock: Blue-anodized aluminium
Standoffs: Blue-anodized aluminium
Clip: Reversible, AISI 420 black PVD
Screws: AISI 303 black PVD
Weight: 65 g / 2.29 oz
Notes: Premium version of the Gabi family with black Dark Matter handle and blue-anodized details

The FOX Gabi EDC FX-451 FG combines the compact and functional design of the Gabi family with a distinctly outdoor-oriented configuration: an OD green G10 handle, black blade and orange-anodized details create an immediately recognizable aesthetic contrast.

The Gabi project was developed as an evolution of the renowned FOX Predator, originally conceived as a robust tactical knife for operational use. FOX preserves its reliability and strength while reinterpreting them in a slimmer, more compact and discreet platform developed specifically for Everyday Carry.

The blade is made from Niolox, hardened to 59-61 HRC, with a reduced thickness of just 2.5 mm. This geometry maintains good structural strength while providing an efficient cutting profile perfectly consistent with the EDC philosophy of the model.

In this version, the blade features the Black Top Shield® surface treatment, which strongly characterizes the appearance of the knife and creates a striking contrast with the OD green handle and orange details.

Opening is handled by the practical thumb stud, while the Crossbar Lock system allows quick and intuitive blade operation. The mechanism can be released without placing the fingers directly in the blade's closing path, making it particularly practical for everyday use.

The OD green G10 handle offers light weight, stability and resistance to regular use. The machined surface also improves grip control without being excessively aggressive during pocket carry.

One of the most distinctive aesthetic features of the FX-451 FG is the use of orange-anodized aluminium details: both the Crossbar Lock control and the standoffs use this finish, creating a particularly effective contrast with the green G10 and black blade.

The equipment is completed by a reversible clip made of AISI 420 stainless steel with Black Idroglider treatment and screws in AISI 303 Black Idroglider, maintaining the technical and dark appearance of the metallic components.

With a 78 mm blade, a thickness of just 2.5 mm and an overall length of 188 mm, the Gabi FX-451 FG offers particularly balanced dimensions for a knife intended for everyday carry.

Entirely Made in Italy, the FOX Gabi FX-451 FG is a particularly successful configuration for those looking for a modern and robust EDC knife with technical materials and a strong visual identity, without sacrificing the manufacturing quality of Maniago production.

Intended use: Everyday Carry / Utility
Production type: Industrial
Brand: FOX Knives
Model: Gabi EDC FX-451 FG
Country of manufacture: Italy
Opening/locking system: Crossbar Lock
Opening: Thumb Stud
Blade: Niolox
Hardness: 59-61 HRC
Blade finish: Black Top Shield®
Blade length: 78 mm / 3.07"
Blade thickness: 2.5 mm / 0.10"
Overall length: 188 mm / 7.40"
Handle: OD green G10
Crossbar Lock: Orange-anodized aluminium
Standoffs: Orange-anodized aluminium
Clip: Reversible, AISI 420 Black Idroglider
Screws: AISI 303 Black Idroglider
Notes: Gabi EDC version with OD green G10 and orange-anodized details

The FOX Gabi EDC FX-451 is the most essential and operational version of the Gabi family: a compact, robust and practical folding knife designed for Everyday Carry, featuring a black G10 handle and a blade with Black Top Shield® finish.

The Gabi project was developed as an evolution of the renowned FOX Predator, a model originally created with a strong tactical and professional orientation. FOX preserves its DNA of strength, reliability and ease of use, while reinterpreting it in a slimmer, more compact and discreet platform specifically designed for everyday use.

The blade is made from Niolox, a modern steel appreciated for its effective balance of cutting performance, edge retention, toughness and corrosion resistance. FOX specifies a hardness of 59-61 HRC, while the reduced thickness of just 2.5 mm makes the blade particularly efficient in cutting without adding unnecessary weight.

In this configuration, the blade features the Black Top Shield® coating, giving the knife a more technical and discreet appearance while providing additional protection to the blade surface during everyday use.

Opening is facilitated by the thumb stud, while the Crossbar Lock system allows smooth and intuitive blade operation. The mechanism allows the lock to be operated without placing the fingers directly in the blade's closing path, making it particularly practical for everyday use.

The black G10 handle represents the most function-oriented choice within the Gabi range. G10 is a lightweight, stable and durable composite material, particularly well suited to an EDC knife intended for regular use. The handle geometry maintains compact dimensions while providing a secure and comfortable grip.

FOX completes this version with matching black components: Crossbar Lock and standoffs in black-anodized aluminium, a reversible clip in AISI 420 with Black Idroglider treatment and screws in AISI 303 with Black Idroglider treatment. The result is a uniform, technical and intentionally understated configuration.

The reversible clip allows the carry configuration to be adapted to the user's preference, increasing the knife's versatility as an everyday tool.

With a 78 mm blade, a thickness of 2.5 mm and an overall length of just 188 mm, the Gabi FX-451 combines compact dimensions with characteristics normally associated with more operationally oriented knives.

Entirely Made in Italy, the FOX Gabi FX-451 is a particularly interesting choice for those looking for a modern, reliable and robust EDC knife featuring technical materials and a functional design, while retaining the manufacturing quality of Maniago production.

Intended use: Everyday Carry / Utility
Production type: Industrial
Brand: FOX Knives
Model: Gabi EDC FX-451
Country of manufacture: Italy
Opening/locking system: Crossbar Lock
Opening: Thumb Stud
Blade: Niolox
Hardness: 59-61 HRC
Blade finish: Black Top Shield®
Blade length: 78 mm / 3.07"
Blade thickness: 2.5 mm / 0.10"
Overall length: 188 mm / 7.40"
Handle: Black G10
Crossbar Lock: Black-anodized aluminium
Standoffs: Black-anodized aluminium
Clip: Reversible, AISI 420 Black Idroglider
Screws: AISI 303 Black Idroglider
Notes: Compact and robust EDC knife, evolution of the FOX Predator

The FOX Gabi EDC FX-451 TI represents the most elegant and refined interpretation of the new Gabi family: a compact folding knife designed for Everyday Carry, characterized in this version by a sophisticated sandblasted titanium handle.

The Gabi project was developed as an evolution of the well-known FOX Predator, a model originally designed with a strong tactical and operational character. FOX preserves its DNA of strength and reliability, while reinterpreting it in a slimmer, more compact and discreet platform, particularly suitable for everyday carry and daily use.

At the heart of the FX-451 TI is a Niolox blade, hardened to 59-61 HRC. With a thickness of only 2.5 mm, the blade achieves an especially effective balance between cutting performance, structural strength and light weight. The satin finish further enhances the clean lines of the knife and pairs perfectly with the titanium handle.

Opening is assisted by the thumb stud, while the Crossbar Lock system allows smooth and intuitive blade operation. This locking system also allows the mechanism to be operated without placing the fingers in the blade's closing path, making everyday use particularly natural and comfortable.

The distinctive feature of this version is the sandblasted titanium handle, a material that combines light weight, strength and a premium feel. FOX complements the titanium with bronze-anodized aluminium details for the Crossbar Lock and standoffs, creating an elegant yet intentionally understated contrast.

The hardware is equally refined: the reversible clip is made of polished AISI 420 stainless steel, while the screws are made of polished AISI 303. The reversible clip increases versatility for everyday carry.

With a 78 mm blade, an overall length of just 188 mm and a weight of only 80 g, the Gabi TI combines premium materials and an all-metal construction while maintaining dimensions and weight perfectly suited to the EDC philosophy.

Entirely Made in Italy, the FOX Gabi FX-451 TI is designed for those looking for a modern and technically capable folding knife without giving up Italian manufacturing quality and the appeal of titanium. A particularly well-balanced configuration both for everyday use and for enthusiasts seeking the most refined version of the Gabi family.

Intended use: Everyday Carry / Utility
Production type: Industrial
Brand: FOX Knives
Model: Gabi EDC FX-451 TI
Country of manufacture: Italy
Opening/locking system: Crossbar Lock
Blade: Niolox
Hardness: 59-61 HRC
Blade finish: Satin
Blade length: 78 mm / 3.07"
Blade thickness: 2.5 mm / 0.10"
Overall length: 188 mm / 7.40"
Handle: Sandblasted titanium
Crossbar Lock: Bronze-anodized aluminium
Standoffs: Bronze-anodized aluminium
Clip: Reversible, polished AISI 420
Screws: Polished AISI 303
Weight: 80 g / 2.82 oz

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Excellent overall condition, with minor storage and handling marks consistent with its age
* Commercial availability: Discontinued - rare collector's model
* Sharpening: Apparently original factory edge
* Marks on blade: Minimal surface marks consistent with age; blade in excellent overall condition
* Marks on handle: Minimal surface marks consistent with age and storage
* Box: Present, original period box, with stains, yellowing and normal signs of age
* Sheath: Present, original Buck Nemo synthetic diving sheath, complete with retaining straps
* Manuals, Certificates and Warranties: Original BUCK NEMO documentation with use and maintenance instructions included
* Inspected and Certified by our in-house laboratory

The Buck 122 Nemo is one of the most fascinating and collectible knives from Buck's early production history and represents an important chapter in the development of the American brand. Introduced in 1967, the Nemo was specifically designed as a professional diving knife for divers requiring a strong, powerful and dependable tool for use in marine environments.

The Nemo design would subsequently give rise to the celebrated Buck 124 Frontiersman. During the earliest stages of production, the two models were essentially identical in terms of knife construction and were distinguished primarily by their equipment: the 122 Nemo was supplied with a dedicated synthetic diving sheath designed to be strapped to the leg, whereas the Frontiersman was marketed with a traditional leather sheath for outdoor use.

The example offered here belongs to one of the rarest and most desirable configurations within the Nemo/Frontiersman family: the early 1967 commercial production with white Teflon spacers. According to historical documentation from the Buck Collectors Club, the estimated production for this configuration was only 300-500 examples.

Its construction details are highly distinctive: a black phenolic handle, thin white Teflon spacers, a robust stainless-steel guard and the characteristic one-piece stainless-steel bird's-beak pommel, complete with a lanyard hole at the end.

The blade marking is also significant for dating the knife. The ricasso bears the simple two-line “BUCK / U.S.A.” stamp, without the 122 model number. Buck introduced systematic model-number markings only in later years, making this early configuration immediately recognizable to knowledgeable collectors.

The large plain-edge blade is made from 440C stainless steel, one of the reference steels used by Buck during this period and selected for its strong cutting performance, toughness and good corrosion resistance. Nevertheless, the Nemo's intended underwater use required particularly careful maintenance after exposure to salt water, something Buck specifically emphasized in the documentation originally supplied with the knife.

This example retains its rare original Buck Nemo diving sheath, made from rigid synthetic material and complete with adjustable straps for attachment to the diver's leg. The presence of the Nemo-specific sheath is particularly important, as it distinguishes this configuration from the contemporary Buck 124 Frontiersman.

The set also retains the original large two-piece ivory-colored Buck Knife box, typical of the earliest production period, and most importantly the rare original “BUCK NEMO” instruction sheet, in which Buck explained the characteristics of the steel and provided specific instructions for proper blade maintenance following use in water.

The knife is in excellent condition considering its age. The blade retains a very uniform satin finish and shows no evident corrosion; the handle, guard and pommel are likewise very well preserved. Only minor surface marks consistent with almost sixty years of storage and handling are visible.

The original sheath is complete and in excellent overall condition, with normal superficial signs of age. The box shows more evident staining, yellowing and storage marks, entirely consistent with its age. The original documentation is present and further enhances the historical importance and completeness of this set.

A 1967 Buck 122 Nemo with white Teflon spacers is already a highly significant piece in Buck history; finding one still accompanied by its original diving sheath, box and BUCK NEMO documentation makes this example particularly desirable for a collection dedicated to early Buck knives, American military and professional knives, or the history of diving knives.

Intended use: Professional diving / Collection
Production type: Industrial
Brand: Buck Knives
Model: 122 Nemo
Year / Variant: 1967 - White Teflon Spacers
Country of manufacture: USA
Blade: 440C stainless steel
Blade profile: Clip Point / Bowie
Edge: Plain
Blade finish: Satin
Marking: Two-line BUCK / U.S.A., without model number
Handle: Black phenolic material
Spacers: White Teflon
Guard: Stainless steel
Pommel: One-piece stainless steel, bird's-beak profile with lanyard hole
Blade length: Approx. 159mm / 6.25"
Overall length: Approx. 298mm / 11.75"
Sheath: Original Buck Nemo synthetic diving sheath with adjustable leg straps
Box: Original two-piece ivory-colored Buck Knife box
Documentation: Original BUCK NEMO instruction and maintenance sheet
Estimated production of this variant: 300-500 examples according to historical Buck Collectors Club documentation
Notes: Rare 1967 example with white Teflon spacers, previously purchased and acquired from a private collection

The CrushGrind mechanism, the brainchild of Japanese inventor Mitsui Kamioka, revolutionized the grind market in 1994 with the introduction of a patented ceramic system. 
This innovative device, guaranteed for 25 years, offers superior performance compared to competitors due to its greater capacity and versatility.

- The mechanism is larger than conventional grinders, allowing it to grind more than double the amount of salt, pepper, spices or dried herbs.
- It is possible to clean the gear by grinding coarse salt adjusted to the minimum. In addition, the CrushGrind mechanism is removable and can be washed with water and detergent, ensuring thorough cleaning and long life.
- CrushGrind offers numerous models suitable for both consumers and the on-trade. The range includes grinds made from natural materials such as wood and products made from biocomposite, an environmentally sustainable material obtained by mixing wood fiber with oil derived from paper production.

The name “Paris” was originally dedicated to Prince Henrik, a French cooking enthusiast and hedonist, in reference to the capital of France, with its imposing stature, combines walnut and stainless steel, adding a touch of elegance to functionality.
With the CrushGrind mechanism, you not only get a high-quality product, you also invest in a kitchen accessory that combines innovation, practicality, and style, perfect for those who want the best in their culinary environment.

The Gefu MERO 3000 ml mixing bowl is the ideal solution for preparing large batches of dough, whipping cream, mixing batters, sauces and desserts with maximum convenience. Thanks to its generous capacity and premium materials, it is an essential kitchen accessory for both home cooks and professionals.

Made from high-quality stainless steel, it features an ergonomic handle for a secure grip while mixing and a wide pouring spout for accurate, drip-free pouring. The easy-to-read internal measuring scale, marked in millilitres and fluid ounces (fl. oz.), allows ingredients to be measured directly inside the bowl.

The non-slip silicone base keeps the bowl firmly in place even when mixing heavy doughs, providing excellent stability and comfort. After use, it can be conveniently cleaned in the dishwasher.

Features

• High-quality stainless steel mixing bowl.
• Capacity: 3 litres (3000 ml).
• Ideal for dough, creams, sauces, purées and sweet or savoury recipes.
• Ergonomic handle for a comfortable and secure grip.
• Wide drip-free pouring spout.
• Internal measuring scale in ml and fl. oz.
• Non-slip silicone base for outstanding stability.
• Dishwasher safe.

Technical Specifications

• Brand: Gefu
• Series: MERO
• Item No.: 28146
• Materials: Stainless steel and silicone
• Capacity: 3000 ml
• Dimensions: 21.4 × 19 × 15.9 cm
• Diameter: 17.6 cm
• Weight: 551 g.

The Gefu MERO 1500 ml mixing bowl is designed to make every kitchen task easier and more precise. Perfect for mixing dough, whipping cream, preparing batters, emulsions and sauces, it combines an elegant design with practical features for everyday use.

Made from high-quality stainless steel, it features an ergonomic handle for a secure grip while mixing and a wide pouring spout that allows clean, accurate pouring without drips or spills. The easy-to-read internal measuring scale, marked in millilitres and fluid ounces, lets you measure ingredients directly inside the bowl without the need for additional measuring cups.

The non-slip silicone base keeps the bowl firmly in place even during vigorous mixing, providing greater stability and comfort. After use, it can be conveniently cleaned in the dishwasher.

Features

• High-quality stainless steel mixing bowl.
• Capacity: 1.5 litres (1500 ml).
• Ergonomic handle for a comfortable and secure grip.
• Wide drip-free pouring spout.
• Internal measuring scale in ml and fl. oz.
• Non-slip silicone base for maximum stability.
• Ideal for dough, creams, sauces, whipped cream and sweet or savoury recipes.
• Dishwasher safe.

Technical Specifications

• Brand: Gefu
• Series: MERO
• Item No.: 28145
• Materials: Stainless steel and silicone
• Capacity: 1500 ml
• Dimensions: 14.7 × 12.7 × 18 cm
• Diameter: 11.5 cm
• Weight: 360 g

The Corner is an EDC (Every Day Carry) folding knife designed to accompany the user in their daily activities, offering practicality, reliability, and a modern design with attention to detail.

Compact and easy to carry, it’s ideal for those looking for a versatile knife to always have on hand, suitable for both urban use and outdoor activities. Its quick and intuitive opening mechanism makes it simple and immediate to use, while its compact size makes it comfortable to carry in a pocket.

The stonewashed blade and Micarta handle give The Corner an elegant and durable look, striking a balance between style, functionality, and a comfortable grip.

Designed in Italy, The Corner offers a practical and affordable solution for those seeking a reliable, well-crafted EDC knife ready to meet everyday needs.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: China
Blade: 10Cr15CoMoV stainless steel (Asian alloy similar to Japanese VG-10)
Blade Finish: Stonewashed
Handle: Ziricote wood
Blade Length: 70 mm
Blade thickness: 3 mm
Closed length: 100 mm
Overall length: 170 mm
Weight: 100 g
Lock type: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with manufacturer’s logos
Notes: Flipper-style opening mechanism on ball bearings

The Corner is an EDC (Every Day Carry) folding knife designed to accompany the user in their daily activities, offering practicality, reliability, and a modern design with attention to detail.

Compact and easy to carry, it’s ideal for those looking for a versatile knife to always have on hand, suitable for both urban use and outdoor activities. Its quick and intuitive opening mechanism makes it simple and immediate to use, while its compact size makes it comfortable to carry in a pocket.

The stonewashed blade and Micarta handle give The Corner an elegant and durable look, striking a balance between style, functionality, and a comfortable grip.

Designed in Italy, The Corner offers a practical and affordable solution for those seeking a reliable, well-crafted EDC knife ready to handle everyday demands.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: China
Blade: 10Cr15CoMoV stainless steel (Asian alloy similar to Japanese VG-10)
Blade Finish: Stonewashed
Handle: Micarta
Blade Length: 70 mm
Blade thickness: 3 mm
Closed length: 100 mm
Overall length: 170 mm
Weight: 100 g
Lock type: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with manufacturer’s logos
Notes: Flipper-style opening mechanism on ball bearings

PUFFY is an EDC (Every Day Carry) folding knife designed to offer practicality, reliability, and excellent value for the price. Designed to accompany the user in daily activities, it combines a modern and functional design with smooth, user-friendly mechanics.

The one-handed opening via a hole in the blade allows for quick and intuitive use, while the ball-bearing rotation system ensures a smooth and precise slide. Compact, lightweight, and easy to carry, it is the ideal companion for everyday needs, from urban use to outdoor activities.

Designed in Italy, the PUFFY is a smart solution for those who want a versatile, well-crafted, and affordable knife without compromising on build quality and functionality.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: China
Blade: 10Cr15CoMoV stainless steel (Asian alloy similar to Japanese VG-10)
Blade Finish: Stonewashed Black Idroglider
Handle: G10
Blade Length: 70 mm
Blade thickness: 3 mm
Closed length: 103 mm
Overall length: 160 mm
Weight: 105 g
Lock type: Liner Lock
Clip: Removable and reversible, made of stainless steel with black PTFE coating
Packaging: Cardboard box with manufacturer’s logos
Notes: Opening mechanism features ball bearings.

PUFFY is an EDC (Every Day Carry) folding knife designed to offer practicality, reliability, and excellent value for the price. Designed to accompany the user in daily activities, it combines a modern and functional design with smooth, user-friendly mechanics.

The one-handed opening via a hole in the blade allows for quick and intuitive use, while the ball-bearing rotation system ensures a smooth and precise slide. Compact, lightweight, and easy to carry, it is the ideal companion for everyday needs, from urban use to outdoor activities.

Designed in Italy, the PUFFY is a smart solution for those who want a versatile, well-crafted, and affordable knife without compromising on build quality and functionality.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: China
Blade: 10Cr15CoMoV stainless steel (Asian alloy similar to Japanese VG-10)
Blade Finish: Stonewashed
Handle: G10
Blade Length: 70 mm
Blade thickness: 3 mm
Closed length: 103 mm
Overall length: 160 mm
Weight: 105 g
Lock type: Liner Lock
Clip: Removable and reversible, made of stainless steel with black PTFE coating
Packaging: Cardboard box with manufacturer’s logos
Notes: Opening mechanism features ball bearings.

PUFFY is an EDC (Every Day Carry) folding knife designed to offer practicality, reliability, and excellent value for the price. Designed to accompany the user in daily activities, it combines a modern and functional design with smooth, user-friendly mechanics.

The one-handed opening via a hole in the blade allows for quick and intuitive use, while the ball-bearing rotation system ensures a smooth and precise slide. Compact, lightweight, and easy to carry, it is the ideal companion for everyday needs, from urban use to outdoor activities.

Designed in Italy, the PUFFY is a smart solution for those who want a versatile, well-crafted, and affordable knife without compromising on build quality and functionality.

Intended Use: EDC / Sports

Production Type: Industrial
Country of Manufacture: China
Blade: 10Cr15CoMoV stainless steel (Asian alloy similar to Japanese VG-10)
Blade Finish: Satin
Handle: Micarta
Blade Length: 70 mm
Blade thickness: 3 mm
Closed length: 103 mm
Overall length: 160 mm
Weight: 100 g
Lock type: Liner Lock
Clip: Removable and reversible, made of stainless steel with black PTFE coating
Packaging: Cardboard box with manufacturer’s logos
Notes: Opening mechanism features ball bearings.

“Vas-y, Kazy!” — a bold call to action that captures the spirit of the new Boker Plus Kazy, designed by French designer and blacksmith Gabriel Berthelemy of La Forge Agab. A compact EDC folding knife, designed for everyday use, that combines a distinctive tactical aesthetic with functional and reliable technical solutions.

The Boker Plus Kazy stands out for its characteristic Harpoon-style blade—a hallmark of the designer’s work—featuring a unique two-tone finish. The black oxide coating protects the blade from scratches and reduces unwanted glare, giving the knife a discreet and professional appearance. Made of Nitro-V steel, the blade offers an excellent balance between edge retention, corrosion resistance, and ease of resharpening, making it suitable for the most common daily activities.

One-handed opening is quick and smooth thanks to the ball-bearing front flipper system and the pronounced blade heel. The robust liner lock ensures a secure lock while maintaining a clean, slim profile. The Coyote Tan G10 scales provide an ergonomic and stable grip even under demanding conditions.

Complete with a tip-up clip for deep, discreet pocket carry, the Boker Plus Kazy is a tactical EDC knife featuring a bold and functional design, ideal for those seeking a reliable companion for daily activities with a unique aesthetic identity.

Intended Use: Sports / EDC

Production Type: Industrial
Country of Manufacture: China
Blade: Nitro-V stainless steel
Blade Finish: Dual Tone – Black Oxide and Satin Finish
Handle: G10
Blade Length: 67mm.
Blade thickness: 3.2 mm.
Overall length: 165 mm.
Weight: 69 g.
Clip: Stainless steel, removable
Lock: Liner Lock
Packaging: Cardboard box with Boker Plus logos
Notes: Front flipper opening system with ball bearings