New Arrivals 2026: new knives, LED flashlights and outdoor & kitchen gear
-
Livio Montagna - Hunting Knife - Satin RWL34 & Amber Sambar Deer - PRIVATE COLLECTION - Handcrafted Knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available: No
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MOHK-CP€348.36Only 1 leftOnly 1 left
-
Buck - 122 Nemo Diving Knife 1967 White Teflon - PRIVATE COLLECTION
KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Excellent overall condition, with minor storage and handling marks consistent with its age
* Commercial availability: Discontinued - rare collector's model
* Sharpening: Apparently original factory edge
* Marks on blade: Minimal surface marks consistent with age; blade in excellent overall condition
* Marks on handle: Minimal surface marks consistent with age and storage
* Box: Present, original period box, with stains, yellowing and normal signs of age
* Sheath: Present, original Buck Nemo synthetic diving sheath, complete with retaining straps
* Manuals, Certificates and Warranties: Original BUCK NEMO documentation with use and maintenance instructions included
* Inspected and Certified by our in-house laboratoryThe Buck 122 Nemo is one of the most fascinating and collectible knives from Buck's early production history and represents an important chapter in the development of the American brand. Introduced in 1967, the Nemo was specifically designed as a professional diving knife for divers requiring a strong, powerful and dependable tool for use in marine environments.
The Nemo design would subsequently give rise to the celebrated Buck 124 Frontiersman. During the earliest stages of production, the two models were essentially identical in terms of knife construction and were distinguished primarily by their equipment: the 122 Nemo was supplied with a dedicated synthetic diving sheath designed to be strapped to the leg, whereas the Frontiersman was marketed with a traditional leather sheath for outdoor use.
The example offered here belongs to one of the rarest and most desirable configurations within the Nemo/Frontiersman family: the early 1967 commercial production with white Teflon spacers. According to historical documentation from the Buck Collectors Club, the estimated production for this configuration was only 300-500 examples.
Its construction details are highly distinctive: a black phenolic handle, thin white Teflon spacers, a robust stainless-steel guard and the characteristic one-piece stainless-steel bird's-beak pommel, complete with a lanyard hole at the end.
The blade marking is also significant for dating the knife. The ricasso bears the simple two-line “BUCK / U.S.A.” stamp, without the 122 model number. Buck introduced systematic model-number markings only in later years, making this early configuration immediately recognizable to knowledgeable collectors.
The large plain-edge blade is made from 440C stainless steel, one of the reference steels used by Buck during this period and selected for its strong cutting performance, toughness and good corrosion resistance. Nevertheless, the Nemo's intended underwater use required particularly careful maintenance after exposure to salt water, something Buck specifically emphasized in the documentation originally supplied with the knife.
This example retains its rare original Buck Nemo diving sheath, made from rigid synthetic material and complete with adjustable straps for attachment to the diver's leg. The presence of the Nemo-specific sheath is particularly important, as it distinguishes this configuration from the contemporary Buck 124 Frontiersman.
The set also retains the original large two-piece ivory-colored Buck Knife box, typical of the earliest production period, and most importantly the rare original “BUCK NEMO” instruction sheet, in which Buck explained the characteristics of the steel and provided specific instructions for proper blade maintenance following use in water.
The knife is in excellent condition considering its age. The blade retains a very uniform satin finish and shows no evident corrosion; the handle, guard and pommel are likewise very well preserved. Only minor surface marks consistent with almost sixty years of storage and handling are visible.
The original sheath is complete and in excellent overall condition, with normal superficial signs of age. The box shows more evident staining, yellowing and storage marks, entirely consistent with its age. The original documentation is present and further enhances the historical importance and completeness of this set.
A 1967 Buck 122 Nemo with white Teflon spacers is already a highly significant piece in Buck history; finding one still accompanied by its original diving sheath, box and BUCK NEMO documentation makes this example particularly desirable for a collection dedicated to early Buck knives, American military and professional knives, or the history of diving knives.
Intended use: Professional diving / Collection
Production type: Industrial
Brand: Buck Knives
Model: 122 Nemo
Year / Variant: 1967 - White Teflon Spacers
Country of manufacture: USA
Blade: 440C stainless steel
Blade profile: Clip Point / Bowie
Edge: Plain
Blade finish: Satin
Marking: Two-line BUCK / U.S.A., without model number
Handle: Black phenolic material
Spacers: White Teflon
Guard: Stainless steel
Pommel: One-piece stainless steel, bird's-beak profile with lanyard hole
Blade length: Approx. 159mm / 6.25"
Overall length: Approx. 298mm / 11.75"
Sheath: Original Buck Nemo synthetic diving sheath with adjustable leg straps
Box: Original two-piece ivory-colored Buck Knife box
Documentation: Original BUCK NEMO instruction and maintenance sheet
Estimated production of this variant: 300-500 examples according to historical Buck Collectors Club documentation
Notes: Rare 1967 example with white Teflon spacers, previously purchased and acquired from a private collectionBU-NEMO-AP€1,139.34Only 1 leftOnly 1 left -
Birkmann - Bread Buddies Perforated 4 Bread Roll Pan 30x20 cm
The Birkmann Bread Buddies perforated baking pan for 4 bread rolls is designed to easily prepare homemade bread rolls with a regular shape and crispy crust. The individual compartments support the dough during proofing and baking, helping maintain an even shape and preventing the rolls from spreading. It is suitable for wheat, wholemeal and rye bread rolls, as well as sweet and savoury recipes.
Made of perforated carbon steel, the pan ensures even heat distribution and allows excess moisture to escape through the special perforated structure. This helps achieve evenly baked rolls with a golden surface and a pleasantly crispy crust. The high-quality non-stick coating makes releasing the rolls easier and reduces the need for baking paper or greasing. The sturdy PFOA-free construction withstands temperatures up to 230 °C.
Designed for everyday home baking, the Birkmann Bread Buddies pan makes preparing fresh bread rolls simple and practical. To preserve the non-stick coating, hand washing is recommended. The product is not dishwasher safe and is not suitable for preparations containing particularly acidic ingredients. The package includes a QR code with a dedicated recipe.
Intended use: Baking 4 bread rolls and small bakery products
Product type: Perforated bread roll baking pan
Material: Perforated carbon steel
Coating: High-quality non-stick coating
Dimensions: 30 x 20 x 3 cm
Capacity: 4 bread rolls
Colour: Black
Maximum temperature: 230 °C
Care and maintenance: Hand wash only. Not dishwasher safe
Package: 1 pan with cardboard sleeve and QR code recipe.331136€12.30Only 3 leftOnly 3 left
-
Birkmann - Toast Bread Pan with Lid - 21 cm
The Birkmann Bread Buddies bread pan with lid is the ideal accessory for baking homemade sandwich bread with a uniform shape, a soft crumb and a thin, even crust.Designed for home baking enthusiasts, it allows you to create perfectly shaped rectangular loaves that are easy to slice and ideal for toast, sandwiches and packed lunches.
Made from carbon steel with a durable non-stick coating, it ensures excellent heat distribution for even baking from the center to the edges. The non-stick surface also makes releasing the bread and cleaning the pan quick and easy.
The lid promotes controlled rising and helps achieve a compact, uniform loaf shape, perfect for creating evenly sliced bread.Its compact size makes it ideal for baking fresh bread for everyday use or convenient storage.
Heat resistant up to 230°C, this bread pan combines quality, practicality and durability, making it suitable for both beginners and experienced bakers.
Brand: Birkmann
Collection: Bread Buddies
Type: Bread pan with lid
Material: Carbon steel with non-stick coating
Dimensions: 21 x 11.5 cm
Maximum temperature: 230°C331501€16.39Only 3 leftOnly 3 left -
Birkmann - SPACE - Cookie Cutters - 4 Pieces
The Birkmann SPACE cookie cutters transform every baking session into an adventure among stars and planets.The set includes 4 cookie cutters inspired by outer space, perfect for making original cookies, fondant decorations, shortcrust pastry shapes and other creative treats for both children and adults.
Made from stainless steel, the cutters ensure precise dough cutting and excellent wear resistance.The shaped edges create clean, well-defined outlines, while the sturdy construction ensures practical use and long-lasting durability.
Brand: Birkmann
Collection: SPACE
Type: Cookie cutter set
Number of pieces: 4
Material: Stainless steel
Use: Cookies, shortcrust pastry, fondant and cake decorations
Cleaning: Hand washing recommended to preserve quality over time25472€9.84Only 3 leftOnly 3 left -
Pulltex - MAUI Wine Cooler Sleeve 35x17.5 cm
The Pulltex Wine Cooler MAUI is a cooling sleeve designed to keep the wine bottle at the ideal temperature throughout service, offering a more practical alternative to traditional ice buckets.
Practical and effective, it is an essential accessory for the table and for wine lovers who want to best preserve the organoleptic characteristics of the beverage even during serving. Thanks to its functional design, the cooling sleeve is very easy to use: simply place it in the freezer and apply it directly to the bottle at serving time. In just a few minutes it helps keep the wine chilled, avoiding ice melt and beverage dilution typical of traditional methods.
The Pulltex Wine Cooler is reversible on both sides, increasing ease of use and extending its durability, making it suitable for frequent use in both domestic and professional settings.
Its flexible structure easily adapts to different bottle shapes, ensuring uniform coverage and consistent cooling across the entire surface. Compact, lightweight and reusable, it is ideal for dinners, aperitifs, hospitality and events, offering an elegant and functional wine service solution.
Brand: Pulltex
Type: Wine cooler sleeve
Use: Cooling and maintaining wine bottle temperature
Dimensions: 35 x 17.5 cm
How to use: Store in freezer before use
Reusable: Yes.10960500€10.66Only 1 leftOnly 1 left
-
Birkmann - Contoura - Cast Alu Baking Mould FOUNTAIN - 24 cm
BIRKMANN – Contoura 25247 – cast aluminium cake pan 24 cm
The Contoura cake pan by Birkmann is designed to deliver precise and reliable baking results even in demanding home kitchens. Made of cast aluminium, it ensures extremely even heat distribution during baking, allowing cakes to develop a perfectly baked structure and uniform golden colour across the entire surface.
The quality of the material and the solid construction of the mould guarantee stability and consistent performance over time. Cast aluminium is highly appreciated in baking thanks to its ability to transmit heat quickly and evenly, supporting consistent batter rise and more accurate baking results compared to traditional pans.
The mould features a height of 10.5 cm, allowing the preparation of tall, soft and well-developed cakes. This depth makes it suitable for a variety of baked goods such as classic cakes, bundt-style desserts, yeast-based sweets and more elaborate recipes requiring a defined shape and uniform baking even in the inner sections.
The material is acid resistant, a useful characteristic when preparing desserts that include ingredients such as fresh fruit, berries or citrus. This property helps preserve the quality and performance of the mould even with rich and aromatic batters.
The Contoura line is also designed to enhance dessert presentation. The mould creates an elegant and defined shape that makes every cake visually refined and ready to be served directly at the table, transforming even simple recipes into professional-looking creations.
The cake pan is designed to withstand temperatures up to 200 °C, making it suitable for most home baking preparations. To preserve the material and maintain the quality of the mould over time, hand washing is recommended.
Technical features
Intended use: Cake and baking mould
Material: Cast aluminium
Colour: Champagne
Dimensions: 235 x 235 x 105 mm
Mould height: 105 mm
Acid resistant: Yes
Temperature resistance: Up to 200 °C
Dishwasher safe: No25247€31.97Only 2 leftOnly 2 left -
Birkmann - Contoura - Cast Alu Baking Mould ROSE - 18 cm
BIRKMANN – Contoura 25242 – die-cast aluminium cake pan 18 cm
The Contoura cake pan by Birkmann is designed to deliver precise and reliable baking results even in demanding home kitchens. Made from die-cast aluminium, it ensures excellent heat distribution during baking, promoting uniform browning and perfectly baked cake structure.
The solid construction and the deep 9 cm mould allow the preparation of tall and well-defined cakes, while the acid-resistant material ensures durability even with batters containing ingredients such as fruit or citrus. The Contoura line design enhances the final presentation, turning every preparation into an elegant and visually striking creation.
Technical features
Intended use: Cake and oven dessert mould
Material: Die-cast aluminium
Colour: Champagne
Dimensions: 200 x 200 x 90 mm
Mould height: 90 mm
Acid resistant: Yes
Temperature resistance: Up to 200 °C
Dishwasher safe: No25242€30.33Only 2 leftOnly 2 left -
Birkmann - Silicone Spatula Set with Cookie Cutter - Flower
The Birkmann silicone spatula set with flower cookie cutter is a practical kit designed for baking enthusiasts. Perfect for preparing homemade biscuits and working dough with precision, it combines functionality and creativity in the kitchen.
The spatula is made of food-grade silicone, flexible and heat resistant, ideal for mixing ingredients, scraping dough and spreading creams efficiently.
The steel cookie cutter allows you to create biscuits with an elegant flower shape, perfect for shortcrust pastry, tea biscuits and decorative homemade treats.
Suitable for both home use and baking enthusiasts, this set makes it easy to prepare biscuits and pastries while adding a decorative touch to your creations.421578€9.84Only 3 leftOnly 3 left -
Timothy Wright - Custom fixed blade knife - 154CM - stag - PRIVATE COLLECTION
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially Available: No
* Edge: Factory original
* Blade Marks: None
* Handle Marks: None
* Sheath: Handmade leather, original, good condition
* Manuals, Certificates, Warranty: No certificates
* Inspected and Certified by our internal labCustom fixed blade knife made by American maker Timothy Wright, a well-known figure in U.S. custom knifemaking. This numbered piece (#16) combines the functionality of a hunting knife with the refined build of a collector’s item.The satin-finished 154CM steel blade offers great edge retention and corrosion resistance, with a usable length of 115 mm and a solid 5 mm thickness. The handle is crafted from genuine stag antler, selected for texture and strength, seamlessly fitted to a full tang. Completing the ensemble is a hand-stitched leather sheath and detailed finishing that confirm its custom origin and limited production.
Intended use: Custom fixed blade knife for collection / light outdoor use
Production type: Handmade
Country of origin: United States of America
Blade: 154CM steel
Blade finish: Satin
Handle: Natural stag antler
Blade length: 115 mm
Blade thickness: 5 mm
Overall length: 237 mm
Weight: 197 g
Sheath: Hand-stitched leather
Notes: “TIMOTHY” signature on blade – 154CM steel – serial #16 – custom, non-serialized productionAP-TW-CORNO€942.62Only 1 leftOnly 1 left -
Zero Tolerance - ZT0117 DuraLock - Satin CPM-MagnaCut & Carbon Fiber - knife
Inspired by the legendary F-117 Stealth, the 0117 brings the same angular precision and engineering efficiency to a modern everyday carry. The slim, sculpted profile is unmistakably ZT: refined, contemporary, and designed for those who appreciate understated complexity. The lightweight carbon fiber handle pairs with a two-tone CPM MagnaCut blade, with satin and stonewashed finishes, striking a perfect balance between elegance and character. The custom thumb stud and precision-machined DuraLock mechanism ensure smooth and secure operation, while titanium spacer tubes and partially integrated liners maintain a solid structure without adding weight. Sleek and functional, the 0117 represents ZT's vision of modern precision.
Key features
* Premium Made in USA folder designed for a slim and refined EDC; lightweight carbon fiber scales
* CPM MagnaCut blade with excellent edge retention, toughness, and corrosion resistance; two-tone satin/stonewashed finish for a sophisticated look
* Slim DuraLock design with custom thumb stud and precision-machined lock pin; smooth opening on KVT bearings
* Partially integrated liners and tubular titanium spacers for maximum strength at reduced weight
* Deep-carry wraparound clip for secure and balanced carry, reversible right/left
Intended use: Sports / CollectionType of production: Industrial
Country of production: USA
Blade: CPM-MagnaCut steel at 62/64HRC
Blade finish: Satin
Handle: Carbon fiber with blue anodized titanium spacers and Black Oxide screws
Blade length: 84mm.
Blade thickness: 2.3mm.
Closed length: 116mm.
Total length: 200mm.
Weight: 54g.
Closure: DuraLock (modified Cross Bar Lock / Axis Lock)
Clip: Removable and reversible, deep pocket type, stainless steel treated with Cerakote
Packaging: cardboard box with Zero Tolerance logos
Notes: flipper opening system on KVT ceramic ball bearingsZT0117€245.90Only 1 leftOnly 1 left
-
Birkmann - AVANTGARDE silicone mould
Bring magic into your kitchen with this Birkmann silicone mould!
With this beautiful AVANTGARDE silicone mould, you can easily make delicious festive treats such as mini cakes, brownies or desserts. Thanks to the non-stick surface of the silicone, the treats can be removed effortlessly after baking or freezing: just wait for them to cool and gently push them out of the mould. The mould allows you to create 6 medium-sized treats in 3 different shapes, each with a diameter of approximately 7 cm.
Made of high-quality silicone, it is resistant to temperatures between -60°C and +240°C, making it ideal for both the oven and freezer.
Diameter: 7x5.5cm
Pieces: 6
Shapes: 3.
251878€16.39Only 1 leftOnly 1 left -
Birkmann - Heart puzzle cookie cutter set - 2 pieces
Made entirely of durable metal, Birkmann cookie cutters are the ideal tool for creating themed cookies quickly, easily and precisely.
Their solid construction ensures a clean, even cut, maintaining the shape perfectly even after baking.
Designed for both amateurs and professional bakers, they are perfect for making biscuits to decorate with royal icing, sugar paste or chocolate, achieving neat and impeccable results.
The smooth surface makes them easy to clean and convenient to use, even for repeated use.
Ideal not only for biscuits, but also for shortcrust pastry, gingerbread, marzipan and sugar paste, they allow you to give free rein to your creativity on every occasion, from parties to special moments.Dimensions: 13cmx2.5cm
145047€9.02Only 1 leftOnly 1 left -
Triangle - Set for carving and decoration of fruits and vegetables - 2 Pcs
Triangle 2-Piece Set for Decorating Pumpkins consists of two utensils designed for hollowing, decorating and finishing pumpkins and fruit.The set includes a practical scoop for hollowing and removing pulp and a special knife for creating decorations and details with greater precision.
The scoop allows you to hollow out pumpkins or other fruit, while the decoration knife is suitable for creating patterns and finishing details.The set is particularly useful for seasonal decorations, such as preparing pumpkins for Halloween.
During Easter, the scoop can also be used to dip and color Easter eggs and to move them after cooking or coloring, reducing the risk of breaking them during handling.
Intended use: Decorating and hollowing pumpkins and fruit
Product type: 2-piece decoration set
Contents: 1 scoop for hollowing and 1 knife for decorations and finishing details
Material: Stainless steel and polypropylene handle
Dimensions: Approx. 18 cm
Packaging: Set consisting of 2 pieces901850210Special Price €14.75 Regular Price €20.49Only 2 leftOnly 2 left
-
Birkmann - decorative silicone mat for cakes and biscuits - HEART
Tappeto in silicone per decorare
Il tappeto in silicone Birkmann serve per decorare direttamente sulla glassa fondente. E' utile anche per creare nastri decorati con fondente.
Le misure sono: cm. 50x50.
Il motivo di decorazione è in rilievo a forma di cuori.
Resiste al calore fino a 250°8144T€22.13Only 3 leftOnly 3 left -
Birkmann - EASY BAKING - Nonstick baking pan for Donuts - 8402
Non-stick material baking pan for making the characteristic donuts.
- The baking pan measures 35x27 cm.
- is possible to make 6 donuts with a diameter of 9 cm.
- Whitford brand nonstick coating.
- Made of high quality carbon steel.
- Heat resistant up to 230° in the oven
8402€18.03Only 1 leftOnly 1 left -
Triangle - Basic carving tool set 3 pieces
Triangle Basic Set 3 Decorating Knives is a practical set for quickly turning fruit and vegetables into decorative shapes, ideal for presenting dishes, buffets and creative preparations.The three utensils allow you to create different motifs, such as leaves, flowers, animals and other decorations from fresh ingredients.
The functional parts are made of tempered stainless steel, while the handles are made of PP. The different blade shapes allow you to make specific cuts, engravings and preparations on fruit and vegetables.
The set is designed for creative decoration of dishes and buffets. The vegetable knife allows you to create decorative details, while the two carving tools allow you to carve and create different shapes directly in the food.
Intended use: Decorating fruit and vegetables
Product type: 3-piece decorating knife set
Functional parts material: Tempered stainless steel
Handle material: PP
Contents: 3 decorating tools
Vegetable knife: 4.5 cm blade
V-blade carving tool: E2, 5 cm blade
Round carving tool: A2, 5 cm blade908570302€26.23Only 1 leftOnly 1 left -
Buck - Vanguard Fixed Blade Knife - Outdoor and Hunting Knife with 420HC Blade and Walnut Handle
Designed for field work and big-game hunting enthusiasts, the Buck Vanguard is a fixed-blade knife that combines tradition, durability, and reliability. A classic model from Buck, designed to confidently handle game preparation and processing thanks to its Drop Point blade, ergonomic handle, and safety guard that ensures optimal control during use.
The 420HC steel blade, subjected to a specific Buck heat treatment, offers an excellent balance between strength, ease of resharpening, and edge retention. The Heritage Walnut DymaLux® handle with brass accents gives the knife an elegant and traditional look, while maintaining a secure and comfortable grip even during prolonged use.
Made in the United States with select materials and meticulous craftsmanship, the Vanguard comes with a dedicated sheath: an indispensable companion for hunters, outdoor enthusiasts, and anyone seeking a sturdy, functional fixed-blade knife steeped in history.
Intended Use: Sports / Hunting
Production Type: Industrial
Country of Origin: USA
Blade: 420HC stainless steel
Blade Finish: Satin
Handle: Walnut with brass guard and pommel
Blade Length: 90 mm
Blade Thickness: 3.5 mm
Overall Length: 215 mm
Weight: 186 g
Sheath: Brown leather
Packaging: Cardboard box with Buck logosB0192BRS-B€131.15Only 2 leftOnly 2 left
-
Buck - 184 Buckmaster - 1986 Vintage Iconic Knife - PRIVATE COLLECTION - knife
KNIFE PREVIOUSLY PURCHASED, FROM A PRIVATE COLLECTION
* Provenance: Acquired from a private individual, previously purchased
* Condition: Overall in excellent condition; shows no signs of actual use. It does, however, have the typical scuff marks caused by inserting and removing the sheath, which inevitably abrades the satin finish of the blade; these marks are superficial, uniform, and characteristic of this particular knife model. The sheath is in excellent condition, with minimal signs of abrasion and no breaks or sagging. It comes with an additional nylon pocket with Velcro that contains the original vintage oil-lubricated compass.
* Commercial availability: Discontinued
* Sharpness: Factory-sharpened, but could be improved. Not re-sharpened to preserve the product’s original appearance.
* Marks on the blade: Several superficial abrasion marks left by the sheath, typical of this particular knife model
* Marks on the handle: A few barely noticeable signs of age
* Box: -
* Sheath: Present, in excellent condition, with an additional nylon pocket containing the original period oil-filled compass
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratory
The most distinctive—and patented—feature of the Buckmaster Buck 184 is the presence of two removable, screw-mounted harpoons, or hooks. Their primary function is to provide an anchor point: the knife can, in fact, be used as a sort of throwing hook by attaching a rope to the ring on the pommel. The manufacturer claimed the grappling hooks had a holding capacity of up to 600 pounds.In the case of the Navy SEALs, the requirement was for a knife that could also be used underwater and, if necessary, allow for the anchoring of equipment or vehicles to a submerged anchor point. This specific requirement contributed to the choice of an all-steel construction, designed to offer strength and durability even under harsh underwater operating conditions.
Intended Use: Sports / Collectible
Production Type: Industrial
Country of Manufacture: USA
Blade: Knife made entirely of 425M stainless steel
Blade Finish: Satin
Handle: Hollow, stainless steel, with rear screw plug
Blade Length: 185 mm.
Blade Thickness: 7.5 mm.
Overall length: 315 mm.
Balance: offset toward the guard
Weight: 675 g.
Sheath: black ABS with an additional nylon pocket, featuring loops and a Velcro closure, containing a small oil-filled field compass.
Notes: 1986 knife previously purchased, from a private collectionBU-184-1986-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Zero Tolerance - Strider Fixed - Tungsten DLC CPM-S30V & OD Green G10 - PRIVATE COLLECTION - ZT0121 - knife
PREVIOUSLY PURCHASED KNIFE, FROM A PRIVATE COLLECTION
* Origin: Acquired from a private seller, previously purchased
* Condition: In excellent mechanical condition - good cosmetic condition
* Commercially available: Discontinued
* Sharpening: Professionally resharpened
* Marks on blade: Several signs of oxidation on the blade and minor abrasions, which do not compromise its practical use
* Marks on handle: None
* Box: Missing
* Sheath: In excellent condition
* Manuals, Certificates, and Warranties: None
* Inspected and certified by our in-house laboratoryIntended Use: Tactical
Manufacturing Type: Industrial
Country of Manufacture: USA
Blade: Full tang, CPM-S30V steel
Blade Finish: Tungsten DLC
Handle: G-10 with 3D machining
Blade length: 105 mm.
Blade thickness: 4.5 mm.
Overall length: 205 mm.
Balance: 1.5 cm rearward
Weight: 264 g.
Sheath: thermoformed Kydex
Notes: designed by Mick StriderZT0121-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Zero Tolerance - ZT0100 by Ken Onion - Black DLC CPM-3V & Black G10 - PRIVATE COLLECTION - knife
KNIFE FROM A PRIVATE COLLECTION
* Origin: Previously purchased knife from a private collection
* Condition: 2008 model, overall in excellent condition
* Commercial Availability: Discontinued
* Sharpness: Factory-sharpened, could be improved
* Blade Condition: Minor cosmetic marks on the DLC finish due to age
* Handle Condition: None
* Box: -
* Sheath: Included
* Manuals, Certificates, and Warranties: -
* Inspected and Certified by our in-house laboratoryThe Zero Tolerance 0100 is one of the first knives produced by Zero Tolerance, the premium division of Kai USA, which was launched in 2006 to develop professional tools for military personnel, law enforcement, and first responders. The 0100 model was, in fact, one of the first three fixed-blade knives in the original lineup, alongside the 0121 and 0150 models.
The design bears the unmistakable stylistic signature of Ken Onion, the renowned American designer already responsible for numerous successes at Kershaw. The distinctive “S”-curved blade offers an unusual combination of cutting ability, power, and precision, making the ZT0100 suitable for both tactical applications and the most demanding outdoor use.
For its construction, Zero Tolerance chose CPM 3V, a steel then considered cutting-edge for its strength and impact resistance, paired with a tungsten DLC coating and three-dimensionally machined G-10 scales. This combination helped solidify the brand’s early reputation as a manufacturer of “overbuilt” knives, designed without compromise for field use.
Today, the ZT 0100 is a discontinued model particularly prized by collectors, as it is considered one of the knives that helped define the Zero Tolerance brand’s identity in its early years.
Intended Use: Tactical / Sporting / Collectible
Production Type: Industrial
Country of Manufacture: USA
Blade: Full tang, CPM-3V carbon steel
Blade Finish: Tungsten DLC coating
Handle: G10
Blade Length: 146mm.
Blade thickness: 4.8 mm.
Overall length: 267 mm.
Weight: 317 g.
Sheath: Nylon, belt-mounted, with thermoformed Kydex lining
Packaging: -
Notes: Previously purchased knife, from a private collectionZT0100-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Pulltex - Professional Corkscrew Hybrid All Black
The Pulltex Professional Corkscrew Hybrid All Black 10910500 is designed for sommeliers, restaurateurs and wine enthusiasts seeking reliability, precision and ergonomics during wine service. This model combines the best features of renowned Pulltex corkscrews, pairing the practicality of a double lever with a modern total black design.
The structure features a double steel lever that allows cork extraction in two steps with minimal effort, reducing the risk of cork breakage. The Teflon-coated spiral improves cork penetration and ensures smoother operation during use.
The curved micro-serrated knife with easy opening allows precise foil cutting, while the integrated guide wing helps perform the cut quickly and accurately. The matte black finish on the lever and blade gives the corkscrew an elegant and professional appearance.
Ideal for wine service in restaurants, wine shops, wine bars and advanced home use, the Pulltex Hybrid All Black offers strength, lightness and practicality even during frequent use.
Material: Steel and high-resistance components
Finish: Matte black ALLBLACK
Type: Professional double lever corkscrew
Spiral: Teflon-coated
Blade: Curved micro-serrated
Blade opening: One-hand opening
Capsule cutting system: Integrated guide wing
Dimensions: 12 x 2,2 x 1,5 cm
Weight: 71 g
Product code: 10910500
Use: Wine, catering, sommelier, wine shop.10910500€9.02Only 0 leftOnly 0 leftOut of stock -
Sog - Recon Government S21 rare knife - blued blade - Made in Japan - PRIVATE COLLECTION
KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in excellent condition
* Availability Discontinued
* Sharpening: Factory edge
* Blade marks: No
* Handle marks: No
* Box: -
* Sheath: Present - Original
* Manuals, Certificates and Warranty: -
* Checked and certified by our internal laboratoryThe SOG Recon Government S21 is an extremely rare variant of the Government model, produced between the 1990s and early 2000s, when SOG was among the world reference brands in outdoor and military cutlery. This version stands out for its dark blade finish.
Unlike the standard Government S13 in stainless steel, the Recon Government uses SK-5 carbon steel, required for the gun-blued treatment, not applicable to stainless steels. This makes it a technically different model.
Produced as an alternative variant of the series, today it is considered an extremely rare knife with almost no availability on the collector market.
Technology and materials
SK-5 steel blade with gun-blued finish that reduces reflections and protects the surface. Hardness 57-58 HRC for a good balance between strength and sharpenability. Black Kraton handle for a secure grip.
Solid construction with steel guard and pommel, consistent with the Government series for heavy-duty use.
Technical specs
Blade: Plain edge, gun-blued finish
Steel: SK-5 carbon steel
Hardness: 57-58 HRC
Handle: Black Kraton
Blade length: 15,9 cm
Total length: 28,6 cm
Blade thickness: 4,6 mm
Weight: approx. 240 g
Sheath: Nylon
Production: Japan
Product code: S21
Production period: 1990 - 2002
Discontinued model, among the rarest in the SOG Government series.SOG-S21AP€0.00Only 0 leftOnly 0 leftOut of stock -
Bawidamann Blades - POGN - Single Edge CPM-CruWear & Paracord - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Not supplied by manufacturer
* Sheath: Present
* Manuals, Certificates, and Warranties: Not supplied by manufacturer
* Checked and certified by our in-house laboratoryBawidamann Blades is a small, 100% American, family-owned company founded and run by Ben Bawidamann in Ohio. The brand stands out for its production of tactical and serious-use knives, designed for operators (soldiers, law enforcement, instructors) as well as EDC (Every Day Carry) enthusiasts or fans of sturdy blades.
The brand's philosophy revolves around unique and functional designs with distinctive and often aggressive aesthetics, with ideas that originate from the operational world and the designer's personal vision. The blades are made from high-quality steel, and many models feature special details such as custom finishes and ergonomic handles.
Bawidamann is not an industrial manufacturer: many knives are produced in limited quantities or small batches available only through the manufacturer's website, making them difficult to find in Europe and highly sought after by collectors.
Intended use: Collection/Sports
Type of production: Midtech
Country of production: USA
Blade: full tang in CPM-CruWear steel at 64HRC
Blade finish: Stonewashed
Handle: Paracord
Blade length: 98mm.
Blade thickness: 4mm.
Total length: 203mm.
Weight: 114g.
Sheath: Boltaron, with rigid belt loop, M.O.L.L.E. compatible.
Packaging: -
Notes: knife previously purchased from a private collectionBB-POGN-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Bawidamann Blades - GUNNR - CPM-S35VN & Black G10 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Not supplied by manufacturer
* Sheath: Present
* Manuals, Certificates, and Warranties: Not supplied by manufacturer
* Checked and certified by our in-house laboratoryBawidamann Blades is a small, 100% American, family-owned company founded and run by Ben Bawidamann in Ohio. The brand stands out for its production of tactical and serious-use knives, designed for operators (soldiers, law enforcement, instructors) as well as EDC (Every Day Carry) enthusiasts or fans of sturdy blades.
The brand's philosophy revolves around unique and functional designs with distinctive and often aggressive aesthetics, with ideas that originate from the operational world and the designer's personal vision. The blades are made from high-quality steel, and many models feature special details such as custom finishes and ergonomic handles.
Bawidamann is not an industrial manufacturer: many knives are produced in limited quantities or small batches available only through the manufacturer's website, making them difficult to find in Europe and highly sought after by collectors.
Intended use: Collection/Sports
Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade finish: Stonewashed
Handle: G10 by VZ Grip
Blade length: 118mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 217 g.
Sheath: Boltaron, with rigid belt loop, M.O.L.L.E. compatible.
Packaging: -
Notes: knife previously purchased from a private collection.BB-GUNNR-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Benchmade - Skirmish Titanium Knife 630 - USED - knife
KNIFE RETIRED FROM A PRIVATE COLLECTION
Type: Previously Purchased
Condition: USED
Commercial availability: No
Sharpening: Re-sharpened by our laboratory
Blade condition: in excellent condition
Handle condition: numerous marks and scratches on both sides
Manuals, Certificates and Warranties: Without certificates
Inspected and Certified by our internal laboratoryDesigned by custom maker Neil Blackwood and manufactured by Benchmade before its definitive removal from the catalog, the 630 Skirmish is now considered a true cult object in tactical and collectible knife making.This used example features a CPM S30V stainless steel blade professionally re-sharpened by our laboratory and solid titanium scales showing evident signs of wear on both sides.A large and fully functional knife, intended for those who want to handle a high-end piece without focusing too much on aesthetics. Even in this configuration, the Skirmish remains an extremely robust, rare and highly desired cutting tool.
Intended use: Collection - Heavy duty use
Production type: Discontinued industrial production
Country of manufacture: United States
Blade: CPM S30V stainless steel - re-sharpened - HRC not declared
Blade finish: Satin - re-sharpened
Handle: Solid anodized titanium, marked on both sides
Blade length: 110 mm
Blade thickness: 4 mm
Closed length: 135 mm
Total length: 245 mm
Closed thickness: 12.5 mm
Weight: 189 g
Lock: Titanium Frame Lock
Clip: Steel, tip-down, non-reversible
Packaging: without packaging
Notes: Discontinued model - used with re-sharpened blade and marked scales - high rarity on the Benchmade secondary marketBM-630CP-US€0.00Only 0 leftOnly 0 leftOut of stock -
Marttiini - MFK‑2 W Folding Knife - 8cm - PRIVATE COLLECTION - sport knife
KNIFE FROM PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Excellent, like new
* Commercial availability: Still available
* Sharpening: Original
* Blade marks: None
* Handle marks: Some minor wear due to time
* Packaging: Handmade leather pouch with lace
* Sheath: -
* Manuals, Certificates, Warranties: MARTTIINI certificates
* Inspected and certified by our in-house lab
The Marttiini Folding Knife MFK-2 W is a medium-sized folding knife designed for reliable everyday use and light outdoor activities, in full accordance with the functional tradition of the Finnish brand. Its design focuses on structural robustness, constructional simplicity, and natural materials, offering a stainless steel blade that's easy to maintain and an ergonomic handle built for real, continuous use. The combination of steel frame, natural wood scales, and integrated pocket clip makes it a balanced choice for users seeking a solid, classically styled EDC with Nordic quality—suitable for both users and collectors.
Intended use: EDC, light outdoor, camping, daily use
Production type: Industrial production
Country of origin: Finland
Blade: 420 stainless steel
Blade finish: Polished
Handle: Natural wood (Finnish birch)
Blade length: 80 mm
Blade thickness: Not disclosed by the manufacturer
Overall length: 190 mm
Weight: 139g
Locking mechanism: Liner lock
Clip: Steel pocket clip, side position, non-reversible (not specified)
Packaging: Marttiini metal box
Note: Part of the MFK (Marttiini Folding Knives) series
The MFK series represents Marttiini’s vision of a modern folding knife, while preserving a strong connection to Finnish aesthetics and materials. The MFK-2 W is a mid-range option, perfect for those seeking a solid, well-crafted folding knife with a classic identity—distinct from many tactical or overly modern EDCs.AP-MFK‑2W€0.00Only 0 leftOnly 0 leftOut of stock -
Casula Cutlery – S’Asseminesa – Handmade Horn Tip Knife – Private Collection
Origin Acquired from a private collector, previously purchased
Condition Like new, never used
Sharpening Factory edge
Marks on blade None
Marks on handle None
Box -
Manuals, Certificates and Warranty Included
Checked and certified by our internal workshopThe Handcrafted Sardinian Guspinese Razor Blade in Horn Tip, made by Coltelleria Artigianale Guspinese, represents the perfect fusion of island tradition and artisanal craftsmanship. Handmade according to the ancient knife-making art of Guspini, this blade stands out for its tipless design, typical of the historic "guspinese", crafted for safe and versatile use.
The satin-finished stainless steel blade ensures corrosion resistance and lasting sharpness, while the carefully carved natural horn handle provides an ergonomic, elegant, and comfortable grip.
Every detail — from the brass bolster to the horn’s natural texture — tells a story of craftsmanship, making this knife not only a functional tool for daily use but also an exclusive collector’s item, ideal for enthusiasts of Sardinian culture, gastronomy, and outdoor life.
Intended use: Daily utility, collecting, outdoor activities
Production type: Handcrafted, handmade
Country of manufacture: Italy (Sardinia)
Blade: Satin-finished stainless steel
Blade finish: Artisan satin finish, smooth surface with fine texture
Handle: Handcrafted natural horn
Blade length: approx. 80mm
Blade thickness: approx. 2.5mm
Closed length: 125mm
Total length: approx. 200mm
Closed thickness: approx. 34mm
Weight: approx. 110g
Locking system: Traditional folding knife (pressure mechanism)
Clip: None
Packaging: Soft protective caseCAG-SASS€0.00Only 0 leftOnly 0 leftOut of stock -
C.A.G. – Sardinian Guspinese Razor Blade – Handcrafted in Horn Tip – PRIVATE COLLECTION
Origin Acquired from a private collector, previously purchased
Condition Like new, never used
Sharpening Factory edge
Marks on blade None
Marks on handle None
Box -
Manuals, Certificates and Warranty Included
Checked and certified by our internal workshopThe Handcrafted Sardinian Guspinese Razor Blade in Horn Tip, made by Coltelleria Artigianale Guspinese, represents the perfect fusion of island tradition and artisanal craftsmanship. Handmade according to the ancient knife-making art of Guspini, this blade stands out for its tipless design, typical of the historic "guspinese", crafted for safe and versatile use.
The satin-finished stainless steel blade ensures corrosion resistance and lasting sharpness, while the carefully carved natural horn handle provides an ergonomic, elegant, and comfortable grip.
Every detail — from the brass bolster to the horn’s natural texture — tells a story of craftsmanship, making this knife not only a functional tool for daily use but also an exclusive collector’s item, ideal for enthusiasts of Sardinian culture, gastronomy, and outdoor life.
Intended use: Daily utility, collecting, outdoor activities
Production type: Handcrafted, handmade
Country of manufacture: Italy (Sardinia)
Blade: Satin-finished stainless steel
Blade finish: Artisan satin finish, smooth surface with fine texture
Handle: Handcrafted natural horn
Blade length: approx. 80mm
Blade thickness: approx. 2.5mm
Closed length: 125mm
Total length: approx. 200mm
Closed thickness: approx. 34mm
Weight: approx. 110g
Locking system: Traditional folding knife (pressure mechanism)
Clip: None
Packaging: Soft protective caseCAG-LSG€0.00Only 0 leftOnly 0 leftOut of stock -
Buck - Omni Hunter 395-1 – Folding Hunting Knife - PRIVATE COLLECTION
* Origin: Acquired from a private collector
* Condition: Excellent
* Commercial availability: Currently discontinued
* Sharpening: Factory edge
* Blade marks: None
* Handle marks: None
* Box: Not included
* Sheath: Cordura
* Manuals, Certificates, Warranty: Not included
* Inspected and Certified by our internal laboratoryBuck 395-1 Omni Hunter is a folding hunting knife by Buck Knives, the legendary American brand known for producing reliable, heavy-duty blades since 1902. This model is ideal for outdoor enthusiasts and hunters seeking a lightweight, ergonomic knife that's easy to handle in all conditions. The 420HC stainless steel blade provides an optimal balance of hardness, corrosion resistance, and ease of sharpening, while the Dynaflex handle ensures a secure grip even in wet environments. With its lockback mechanism and one-hand opening, the Buck 395-1 is the perfect companion for hiking, hunting, or any outdoor adventure, blending traditional aesthetics with modern performance.
Intended use: Hunting, outdoor, camping, EDC
Production type: Industrial, Omni Hunter series
Country of origin: USA
Blade: 420HC stainless steel
Blade finish: Satin / Drop point
Handle: Dynaflex® (ergonomic rubber)
Blade length: approx. 76 mm
Blade thickness: approx. 3.0 mm
Closed length: approx. 118 mm
Total length: approx. 194 mm
Closed thickness: approx. 12–14 mm
Weight: approx. 87.9 g
Locking system: Lockback
Sheath: Cordura
Packaging: No box includedBU395-1€0.00Only 0 leftOnly 0 leftOut of stock -
Gian Paolo ‘Furitto’ Concedda - Guspinese bovine horn and acid-etched titanium - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: in excellent condition, with some minor signs of wear
* Available on the market: unique, handmade piece
* Sharpness: original
* Marks on blade: None
* Marks on handle: some minor abrasions due to wear and tear
* Packaging: handmade leather case with cord
* Sheath: -
* Manuals, certificates and guarantees: Business card and certificate of authenticity, difficult to read due to ink discolouration over time
* Checked and certified by our in-house laboratorySardinia boasts a thousand-year-old tradition in metalworking and knife production, with a particular concentration in the Guspinese-Arburese-Gonnese area, historically linked to the mines of Montevecchio. This area is home to iconic models such as the Arburesa and the Guspinese (Sa Kuspidesa), symbols of craftsmanship handed down through the ages. This is where the work of Gian Paolo Cancedda, aka Furitto, comes in. He is a master knife maker who combines loyalty to tradition with technical research, helping to keep Guspinese cutlery alive and recognisable throughout the world.
Intended use: Regional / Collection
Type of production: Handcrafted
Country of production: Guspini, Sardinia, Italy
Blade: Sandvik 12C27 stainless steel
Blade treatment: satin finish
Handle: solid cow horn tip with acid-treated titanium collar
Blade length: 96 mm.
Blade thickness: 2 mm.
Closed length: 102 mm.
Total length: 199 mm.
Closed thickness: 18 mm.
Weight: 38 g.
Closure: no blade lock
Clip: -
Sheath: -
Packaging: leather case with handmade lace, craftsman's business card and certificate of authenticity from the Italian Knife Makers' Guild, difficult to read due to ink discolouration over time
Notes: knife previously purchased from a private collectionFUR-GUS-CP€0.00Only 0 leftOnly 0 leftOut of stock -
McNees Knives - MAC2 3.5" Fastback - Matte SW CPM-Magnacut & Bronze Titanium - PRIVATE COLLECTION - Knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Origin: Retired from a private collection, previously purchased
* Condition: Like new, never used
* Available on the market: 2023 model, currently out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Sheath: -
* Manuals, Certificates, and Warranties: Present
* Checked and certified by our in-house labMcNees Knives is an independent American company based in Vernon, Alabama, specializing in the production of high-quality folding knives, fixed blades, and EDC equipment, made entirely in the United States. For over fifteen years, the company has been building strong relationships with customers, partners, and suppliers who share the same values of reliability, passion, and attention to detail.
Today, McNees Knives continues to grow, offering some of the best knives and EDC accessories on the market, backed by customer service that is considered among the best in the industry. Entering the world of McNees means choosing quality, craftsmanship, and a brand that truly puts the customer first.
Intended use: Sports/Tactical
Type of production: MidTech
Country of production: USA
Blade: CPM-MagnaCut steel
Blade treatment: Matte Stonewashed
Handle: Bronze-colored anodized titanium
Blade length: 87mm.
Blade thickness: 3.8mm.
Closed length: 107 mm.
Total length: 194 mm.
Weight: 122 g.
Lock: Frame Lock
Clip: bronze-colored anodized titanium, removable
Packaging: cardboard box with McNees logos, warranty certificate with technical specifications
Notes: previously purchased knife from a private collectionMCN014-CP€0.00Only 0 leftOnly 0 leftOut of stock -
Klotzli - High Tech Opal Liner Lock Folder - ATS-34 & Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased
* Condition: Overall in excellent condition, shows some minor signs of age and a few small abrasions on the titanium handle, mechanically flawless
* Available on the market: Out of production
* Sharpness: Factory sharp
* Marks on blade: None
* Marks on handle: minor abrasions on the titanium due to age
* Box: Present and complete
* Sheath: Present, with signs of age, but which do not compromise its use
* Manuals, Certificates and Warranties: Present
* Checked and certified by our in-house laboratoryThis liner lock knife by Klotzli Knives of Switzerland is a refined model from the early 2000s by Wimpff Design, made with a milled and anodised two-tone titanium frame, embellished with a genuine opal stone.
The Wharncliffe-style blade, with a satin finish, stands out for its precision and elegance. The locking mechanism is solid and reliable, the click is crisp and the blade is perfectly centred; opening and closing are smooth and fluid, confirming the high quality of construction. The knife comes with a black leather sheath and is in excellent condition.
The Swiss company Klotzli has been producing knives for over 150 years and is internationally renowned for its high-end folding knives. The use of selected materials combined with rigorous production standards guarantees a consistent level of quality over time. The models are the result of collaboration with world-renowned master knife makers such as Michael Walker and Christian Wimpff. Production is supervised directly by Peter Klotzli, a fifth-generation knife maker, who personally checks every item made in his workshop.
Intended use: collection / sports
Type of production: Industrial
Country of production: Switzerland
Blade: ATS-34 stainless steel
Blade finish: satin
Handle: anodised titanium with opal stone insert
Locking system: Titanium Liner Lock
Blade length: 85mm.
Blade thickness: 3 mm.
Total length: 192 mm.
Weight: 77 g.
Sheath: pocket sheath, black leather, with manufacturer's logos
Notes: knife no longer in production, previously purchased, from a private collectionCHW-M-OPAL-CP€0.00Only 0 leftOnly 0 leftOut of stock
