New Arrivals 2026: new knives, LED flashlights and outdoor & kitchen gear

The NITECORE SUMMIT Air is a compact and lightweight power bank designed for outdoor use in extreme environmental conditions. With a stated capacity of 8,000 mAh, it provides a practical solution for keeping smartphones, action cameras, electronic devices and other accessories powered during activities such as skiing, ski touring, mountaineering and ice climbing.

Designed for winter use, the SUMMIT Air can be used while discharging at temperatures as low as -40 °C. Its IPX8 waterproof rating also provides a high level of water resistance, making it suitable for snow, rain and challenging weather conditions.

The two USB-C ports allow up to two devices to be powered simultaneously, while the maximum output power of 22.5 W supports fast charging protocols including PD, QC 3.0 and SCP.

Measuring just 92 × 41 × 21 mm and weighing approximately 135 g, the NITECORE SUMMIT Air is easy to carry and is a practical solution for anyone looking for a reliable power source during outdoor activities.

Key Features

• Capacity: 8,000 mAh
• Maximum output power: 22.5 W
• 2 USB-C ports
• Supports PD, QC 3.0 and SCP protocols
• Usable while discharging down to -40 °C
• IPX8 waterproof rating
• Compact dimensions: 92 × 41 × 21 mm
• Weight: approximately 135 g
• Integrated RGB indicators
• Charging cable with lanyard included
• Ideal for outdoor and winter activities

Technical Specifications

• Brand: NITECORE
• Model: SUMMIT Air
• Model code: NCPB0501
• Type: Power bank
• Battery: Li-ion
• Stated capacity: 8,000 mAh
• Rated capacity: 4,700 mAh (5 V / 3 A)
• Rated energy: 28.08 Wh
• Typical energy: 28.8 Wh
• USB-C input: 5 V / 2 A; 9 V / 2.22 A; 12 V / 1.67 A
• Maximum input power: 20 W
• Outputs: 2 × USB-C
• Output per port: 5 V / 3 A; 9 V / 2.22 A; 10 V / 2.25 A; 12 V / 1.67 A
• Maximum output power: 22.5 W
• Simultaneous output: 5 V / 3 A – 15 W max
• Supported protocols: PD, QC 3.0, SCP
• Water resistance: IPX8
• Discharge temperature: -40 °C to +60 °C
• Charging temperature: 0 °C to +50 °C
• Dimensions: 92 × 41 × 21 mm
• Weight: 135 g ± 5 g
• Included accessories: charging cable with lanyard

Package Contents

• NITECORE SUMMIT Air
• Charging cable with lanyard

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available: No
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratory

Intended use: hunting / collection

Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.

The Nitecore NWE10 is an ultra-compact electronic emergency whistle designed to generate a powerful acoustic signal of up to 126 dB without the need to blow into it.

It is designed for trekking, hiking, trail running, camping, mountaineering, boating, travelling and emergency kits, where it may be essential to quickly attract attention or signal your position even in conditions of fatigue, cold or physical difficulty.

Unlike a traditional whistle, the NWE10 generates its signal electronically: simply operate the power button to produce a powerful and repeatable acoustic signal, without using physical energy by continuously blowing into a whistle.

Acoustic output up to 126 dB

Despite its extremely compact dimensions, the Nitecore NWE10 can reach a declared sound pressure level of up to 126 dB.

The powerful acoustic output is designed to increase the possibility of being detected from a distance and provides valuable support in situations where your voice may not be sufficient or cannot be used for long periods.

Single and continuous acoustic signal

With the device switched off, a brief press of the button produces a single acoustic signal.

Holding the button down activates the continuous acoustic signal, which stops when the button is released.

This mode allows you to immediately attract attention while directly controlling the duration of the signal.

Automatic SOS mode

By holding the button down for approximately 10 seconds, the NWE10 automatically enters SOS mode.

The device then switches from the continuous signal to an automatic intermittent acoustic sequence, repeated approximately every 3 minutes.

This function is particularly useful in an emergency because it allows the device to continue signalling automatically without requiring the user to constantly hold down the control.

Beacon mode

During SOS operation, it is possible to switch to Beacon mode, providing an additional signalling mode designed to help locate the user.

No need to blow

One of the main advantages of the Nitecore NWE10 compared with a conventional whistle is its fully electronic operation.

In an emergency situation, after many hours of walking or in conditions of cold, stress or fatigue, repeatedly blowing into a whistle can become difficult.

With the NWE10 you simply press a button: the electronics generate the acoustic signal for you, reducing the physical effort required to continue attracting attention.

Up to 80 hours runtime

The built-in Li-ion battery provides a declared runtime of up to 80 hours, an especially important feature for a device intended for safety and outdoor use.

To keep the battery in good condition during long periods of inactivity, Nitecore recommends periodically recharging the device.

USB-C charging

The NWE10 features a modern USB-C port and can be recharged using compatible chargers, power banks and other USB power sources.

Charging input is 5V / 1A and a full recharge takes approximately 2 hours when using a compatible power adapter.

The device can also be used while charging.

Battery level indicator

Four indicator lights allow you to quickly check the remaining battery capacity:

• 4 indicators on: 76% - 100%
• 3 indicators on: 51% - 75%
• 2 indicators on: 26% - 50%
• 1 indicator on: 0% - 25%

When only one indicator remains illuminated, it is recommended to recharge the product as soon as possible.

Compact and lightweight

With dimensions of approximately 65 x 33 x 32 mm and a weight of only 38 g, the Nitecore NWE10 can easily be added to personal equipment without significantly increasing weight or bulk.

It can be carried in a backpack, trekking equipment, an EDC kit, a vehicle or any emergency preparedness kit.

Ideal for

• Trekking and hiking
• Trail running and ultratrail
• Mountaineering and outdoor activities
• Camping and bivouacking
• Boating and fishing
• Travel
• Emergency kits
• EDC equipment

Main features

• Electronic emergency whistle
• Sound output up to 126 dB
• No need to blow
• Single acoustic signal
• Continuous acoustic signal
• Automatic SOS mode
• Beacon mode
• Built-in Li-ion battery
• Runtime up to 80 hours
• USB-C charging
• 5V / 1A input
• Charging time approximately 2 hours
• 4-level battery indicator
• Dimensions: approximately 65 x 33 x 32 mm
• Weight: approximately 38 g

Technical specifications

Brand: Nitecore
Model: NWE10
Type: Electronic emergency whistle
Maximum sound output: 126 dB
Modes: Single, Continuous, SOS, Beacon
Maximum runtime: up to 80 hours
Battery: Built-in rechargeable Li-ion battery
Charging: USB-C
Input: 5V / 1A
Charging time: approximately 2 hours
Dimensions: approximately 65 x 33 x 32 mm
Weight: approximately 38 g
Colour: Green
Operating temperature: -40°C to +35°C
Storage temperature: -40°C to +45°C

Warnings

The Nitecore NWE10 produces an extremely powerful acoustic signal. Avoid prolonged use close to the ears to prevent possible hearing damage.

Do not cover the sound outlet during operation and do not immerse the device in water or other liquids.

The product contains a built-in Li-ion battery and must not be disassembled, punctured, crushed, burned or modified.

Nitecore NWE10: small enough to carry, powerful when needed

The Nitecore NWE10 reinterprets one of the simplest and most traditional outdoor safety tools, transforming it into a modern, rechargeable electronic device equipped with automatic signalling modes.

126 dB sound output, only 38 grams, SOS and Beacon modes, up to 80 hours runtime and USB-C charging make it an extremely interesting accessory for outdoor enthusiasts or anyone wishing to add a simple and immediate emergency signalling device to their equipment.

A device that takes up very little space and that you hopefully never have to use in a real emergency, but which can become extremely important when you need to make yourself heard.

The Nitecore NWE10 is an ultra-compact electronic emergency whistle designed to generate a powerful acoustic signal of up to 126 dB without the need to blow into it.

It is designed for trekking, hiking, trail running, camping, mountaineering, boating, travelling and emergency kits, where it may be essential to quickly attract attention or signal your position even in conditions of fatigue, cold or physical difficulty.

Unlike a traditional whistle, the NWE10 generates its signal electronically: simply operate the power button to produce a powerful and repeatable acoustic signal, without using physical energy by continuously blowing into a whistle.

Acoustic output up to 126 dB

Despite its extremely compact dimensions, the Nitecore NWE10 can reach a declared sound pressure level of up to 126 dB.

The powerful acoustic output is designed to increase the possibility of being detected from a distance and provides valuable support in situations where your voice may not be sufficient or cannot be used for long periods.

Single and continuous acoustic signal

With the device switched off, a brief press of the button produces a single acoustic signal.

Holding the button down activates the continuous acoustic signal, which stops when the button is released.

This mode allows you to immediately attract attention while directly controlling the duration of the signal.

Automatic SOS mode

By holding the button down for approximately 10 seconds, the NWE10 automatically enters SOS mode.

The device then switches from the continuous signal to an automatic intermittent acoustic sequence, repeated approximately every 3 minutes.

This function is particularly useful in an emergency because it allows the device to continue signalling automatically without requiring the user to constantly hold down the control.

Beacon mode

During SOS operation, it is possible to switch to Beacon mode, providing an additional signalling mode designed to help locate the user.

No need to blow

One of the main advantages of the Nitecore NWE10 compared with a conventional whistle is its fully electronic operation.

In an emergency situation, after many hours of walking or in conditions of cold, stress or fatigue, repeatedly blowing into a whistle can become difficult.

With the NWE10 you simply press a button: the electronics generate the acoustic signal for you, reducing the physical effort required to continue attracting attention.

Up to 80 hours runtime

The built-in Li-ion battery provides a declared runtime of up to 80 hours, an especially important feature for a device intended for safety and outdoor use.

To keep the battery in good condition during long periods of inactivity, Nitecore recommends periodically recharging the device.

USB-C charging

The NWE10 features a modern USB-C port and can be recharged using compatible chargers, power banks and other USB power sources.

Charging input is 5V / 1A and a full recharge takes approximately 2 hours when using a compatible power adapter.

The device can also be used while charging.

Battery level indicator

Four indicator lights allow you to quickly check the remaining battery capacity:

• 4 indicators on: 76% - 100%
• 3 indicators on: 51% - 75%
• 2 indicators on: 26% - 50%
• 1 indicator on: 0% - 25%

When only one indicator remains illuminated, it is recommended to recharge the product as soon as possible.

Compact and lightweight

With dimensions of approximately 65 x 33 x 32 mm and a weight of only 38 g, the Nitecore NWE10 can easily be added to personal equipment without significantly increasing weight or bulk.

It can be carried in a backpack, trekking equipment, an EDC kit, a vehicle or any emergency preparedness kit.

Ideal for

• Trekking and hiking
• Trail running and ultratrail
• Mountaineering and outdoor activities
• Camping and bivouacking
• Boating and fishing
• Travel
• Emergency kits
• EDC equipment

Main features

• Electronic emergency whistle
• Sound output up to 126 dB
• No need to blow
• Single acoustic signal
• Continuous acoustic signal
• Automatic SOS mode
• Beacon mode
• Built-in Li-ion battery
• Runtime up to 80 hours
• USB-C charging
• 5V / 1A input
• Charging time approximately 2 hours
• 4-level battery indicator
• Dimensions: approximately 65 x 33 x 32 mm
• Weight: approximately 38 g

Technical specifications

Brand: Nitecore
Model: NWE10
Type: Electronic emergency whistle
Maximum sound output: 126 dB
Modes: Single, Continuous, SOS, Beacon
Maximum runtime: up to 80 hours
Battery: Built-in rechargeable Li-ion battery
Charging: USB-C
Input: 5V / 1A
Charging time: approximately 2 hours
Dimensions: approximately 65 x 33 x 32 mm
Weight: approximately 38 g
Colour: Green
Operating temperature: -40°C to +35°C
Storage temperature: -40°C to +45°C

Warnings

The Nitecore NWE10 produces an extremely powerful acoustic signal. Avoid prolonged use close to the ears to prevent possible hearing damage.

Do not cover the sound outlet during operation and do not immerse the device in water or other liquids.

The product contains a built-in Li-ion battery and must not be disassembled, punctured, crushed, burned or modified.

Nitecore NWE10: small enough to carry, powerful when needed

The Nitecore NWE10 reinterprets one of the simplest and most traditional outdoor safety tools, transforming it into a modern, rechargeable electronic device equipped with automatic signalling modes.

126 dB sound output, only 38 grams, SOS and Beacon modes, up to 80 hours runtime and USB-C charging make it an extremely interesting accessory for outdoor enthusiasts or anyone wishing to add a simple and immediate emergency signalling device to their equipment.

A device that takes up very little space and that you hopefully never have to use in a real emergency, but which can become extremely important when you need to make yourself heard.

The Nitecore NWE10 is an ultra-compact electronic emergency whistle designed to generate a powerful acoustic signal of up to 126 dB without the need to blow into it.

It is designed for trekking, hiking, trail running, camping, mountaineering, boating, travelling and emergency kits, where it may be essential to quickly attract attention or signal your position even in conditions of fatigue, cold or physical difficulty.

Unlike a traditional whistle, the NWE10 generates its signal electronically: simply operate the power button to produce a powerful and repeatable acoustic signal, without using physical energy by continuously blowing into a whistle.

Acoustic output up to 126 dB

Despite its extremely compact dimensions, the Nitecore NWE10 can reach a declared sound pressure level of up to 126 dB.

The powerful acoustic output is designed to increase the possibility of being detected from a distance and provides valuable support in situations where your voice may not be sufficient or cannot be used for long periods.

Single and continuous acoustic signal

With the device switched off, a brief press of the button produces a single acoustic signal.

Holding the button down activates the continuous acoustic signal, which stops when the button is released.

This mode allows you to immediately attract attention while directly controlling the duration of the signal.

Automatic SOS mode

By holding the button down for approximately 10 seconds, the NWE10 automatically enters SOS mode.

The device then switches from the continuous signal to an automatic intermittent acoustic sequence, repeated approximately every 3 minutes.

This function is particularly useful in an emergency because it allows the device to continue signalling automatically without requiring the user to constantly hold down the control.

Beacon mode

During SOS operation, it is possible to switch to Beacon mode, providing an additional signalling mode designed to help locate the user.

No need to blow

One of the main advantages of the Nitecore NWE10 compared with a conventional whistle is its fully electronic operation.

In an emergency situation, after many hours of walking or in conditions of cold, stress or fatigue, repeatedly blowing into a whistle can become difficult.

With the NWE10 you simply press a button: the electronics generate the acoustic signal for you, reducing the physical effort required to continue attracting attention.

Up to 80 hours runtime

The built-in Li-ion battery provides a declared runtime of up to 80 hours, an especially important feature for a device intended for safety and outdoor use.

To keep the battery in good condition during long periods of inactivity, Nitecore recommends periodically recharging the device.

USB-C charging

The NWE10 features a modern USB-C port and can be recharged using compatible chargers, power banks and other USB power sources.

Charging input is 5V / 1A and a full recharge takes approximately 2 hours when using a compatible power adapter.

The device can also be used while charging.

Battery level indicator

Four indicator lights allow you to quickly check the remaining battery capacity:

• 4 indicators on: 76% - 100%
• 3 indicators on: 51% - 75%
• 2 indicators on: 26% - 50%
• 1 indicator on: 0% - 25%

When only one indicator remains illuminated, it is recommended to recharge the product as soon as possible.

Compact and lightweight

With dimensions of approximately 65 x 33 x 32 mm and a weight of only 38 g, the Nitecore NWE10 can easily be added to personal equipment without significantly increasing weight or bulk.

It can be carried in a backpack, trekking equipment, an EDC kit, a vehicle or any emergency preparedness kit.

Ideal for

• Trekking and hiking
• Trail running and ultratrail
• Mountaineering and outdoor activities
• Camping and bivouacking
• Boating and fishing
• Travel
• Emergency kits
• EDC equipment

Main features

• Electronic emergency whistle
• Sound output up to 126 dB
• No need to blow
• Single acoustic signal
• Continuous acoustic signal
• Automatic SOS mode
• Beacon mode
• Built-in Li-ion battery
• Runtime up to 80 hours
• USB-C charging
• 5V / 1A input
• Charging time approximately 2 hours
• 4-level battery indicator
• Dimensions: approximately 65 x 33 x 32 mm
• Weight: approximately 38 g

Technical specifications

Brand: Nitecore
Model: NWE10
Type: Electronic emergency whistle
Maximum sound output: 126 dB
Modes: Single, Continuous, SOS, Beacon
Maximum runtime: up to 80 hours
Battery: Built-in rechargeable Li-ion battery
Charging: USB-C
Input: 5V / 1A
Charging time: approximately 2 hours
Dimensions: approximately 65 x 33 x 32 mm
Weight: approximately 38 g
Colour: Green
Operating temperature: -40°C to +35°C
Storage temperature: -40°C to +45°C

Warnings

The Nitecore NWE10 produces an extremely powerful acoustic signal. Avoid prolonged use close to the ears to prevent possible hearing damage.

Do not cover the sound outlet during operation and do not immerse the device in water or other liquids.

The product contains a built-in Li-ion battery and must not be disassembled, punctured, crushed, burned or modified.

Nitecore NWE10: small enough to carry, powerful when needed

The Nitecore NWE10 reinterprets one of the simplest and most traditional outdoor safety tools, transforming it into a modern, rechargeable electronic device equipped with automatic signalling modes.

126 dB sound output, only 38 grams, SOS and Beacon modes, up to 80 hours runtime and USB-C charging make it an extremely interesting accessory for outdoor enthusiasts or anyone wishing to add a simple and immediate emergency signalling device to their equipment.

A device that takes up very little space and that you hopefully never have to use in a real emergency, but which can become extremely important when you need to make yourself heard.

The Nitecore NWE10 is an ultra-compact electronic emergency whistle designed to generate a powerful acoustic signal of up to 126 dB without the need to blow into it.

It is designed for trekking, hiking, trail running, camping, mountaineering, boating, travelling and emergency kits, where it may be essential to quickly attract attention or signal your position even in conditions of fatigue, cold or physical difficulty.

Unlike a traditional whistle, the NWE10 generates its signal electronically: simply operate the power button to produce a powerful and repeatable acoustic signal, without using physical energy by continuously blowing into a whistle.

Acoustic output up to 126 dB

Despite its extremely compact dimensions, the Nitecore NWE10 can reach a declared sound pressure level of up to 126 dB.

The powerful acoustic output is designed to increase the possibility of being detected from a distance and provides valuable support in situations where your voice may not be sufficient or cannot be used for long periods.

Single and continuous acoustic signal

With the device switched off, a brief press of the button produces a single acoustic signal.

Holding the button down activates the continuous acoustic signal, which stops when the button is released.

This mode allows you to immediately attract attention while directly controlling the duration of the signal.

Automatic SOS mode

By holding the button down for approximately 10 seconds, the NWE10 automatically enters SOS mode.

The device then switches from the continuous signal to an automatic intermittent acoustic sequence, repeated approximately every 3 minutes.

This function is particularly useful in an emergency because it allows the device to continue signalling automatically without requiring the user to constantly hold down the control.

Beacon mode

During SOS operation, it is possible to switch to Beacon mode, providing an additional signalling mode designed to help locate the user.

No need to blow

One of the main advantages of the Nitecore NWE10 compared with a conventional whistle is its fully electronic operation.

In an emergency situation, after many hours of walking or in conditions of cold, stress or fatigue, repeatedly blowing into a whistle can become difficult.

With the NWE10 you simply press a button: the electronics generate the acoustic signal for you, reducing the physical effort required to continue attracting attention.

Up to 80 hours runtime

The built-in Li-ion battery provides a declared runtime of up to 80 hours, an especially important feature for a device intended for safety and outdoor use.

To keep the battery in good condition during long periods of inactivity, Nitecore recommends periodically recharging the device.

USB-C charging

The NWE10 features a modern USB-C port and can be recharged using compatible chargers, power banks and other USB power sources.

Charging input is 5V / 1A and a full recharge takes approximately 2 hours when using a compatible power adapter.

The device can also be used while charging.

Battery level indicator

Four indicator lights allow you to quickly check the remaining battery capacity:

• 4 indicators on: 76% - 100%
• 3 indicators on: 51% - 75%
• 2 indicators on: 26% - 50%
• 1 indicator on: 0% - 25%

When only one indicator remains illuminated, it is recommended to recharge the product as soon as possible.

Compact and lightweight

With dimensions of approximately 65 x 33 x 32 mm and a weight of only 38 g, the Nitecore NWE10 can easily be added to personal equipment without significantly increasing weight or bulk.

It can be carried in a backpack, trekking equipment, an EDC kit, a vehicle or any emergency preparedness kit.

Ideal for

• Trekking and hiking
• Trail running and ultratrail
• Mountaineering and outdoor activities
• Camping and bivouacking
• Boating and fishing
• Travel
• Emergency kits
• EDC equipment

Main features

• Electronic emergency whistle
• Sound output up to 126 dB
• No need to blow
• Single acoustic signal
• Continuous acoustic signal
• Automatic SOS mode
• Beacon mode
• Built-in Li-ion battery
• Runtime up to 80 hours
• USB-C charging
• 5V / 1A input
• Charging time approximately 2 hours
• 4-level battery indicator
• Dimensions: approximately 65 x 33 x 32 mm
• Weight: approximately 38 g

Technical specifications

Brand: Nitecore
Model: NWE10
Type: Electronic emergency whistle
Maximum sound output: 126 dB
Modes: Single, Continuous, SOS, Beacon
Maximum runtime: up to 80 hours
Battery: Built-in rechargeable Li-ion battery
Charging: USB-C
Input: 5V / 1A
Charging time: approximately 2 hours
Dimensions: approximately 65 x 33 x 32 mm
Weight: approximately 38 g
Colour: Green
Operating temperature: -40°C to +35°C
Storage temperature: -40°C to +45°C

Warnings

The Nitecore NWE10 produces an extremely powerful acoustic signal. Avoid prolonged use close to the ears to prevent possible hearing damage.

Do not cover the sound outlet during operation and do not immerse the device in water or other liquids.

The product contains a built-in Li-ion battery and must not be disassembled, punctured, crushed, burned or modified.

Nitecore NWE10: small enough to carry, powerful when needed

The Nitecore NWE10 reinterprets one of the simplest and most traditional outdoor safety tools, transforming it into a modern, rechargeable electronic device equipped with automatic signalling modes.

126 dB sound output, only 38 grams, SOS and Beacon modes, up to 80 hours runtime and USB-C charging make it an extremely interesting accessory for outdoor enthusiasts or anyone wishing to add a simple and immediate emergency signalling device to their equipment.

A device that takes up very little space and that you hopefully never have to use in a real emergency, but which can become extremely important when you need to make yourself heard.

KNIFE ACQUIRED FROM A PRIVATE COLLECTION
* Origin: Acquired from a private individual, previously purchased
* Condition: Excellent overall condition, with minor storage and handling marks consistent with its age
* Commercial availability: Discontinued - rare collector's model
* Sharpening: Apparently original factory edge
* Marks on blade: Minimal surface marks consistent with age; blade in excellent overall condition
* Marks on handle: Minimal surface marks consistent with age and storage
* Box: Present, original period box, with stains, yellowing and normal signs of age
* Sheath: Present, original Buck Nemo synthetic diving sheath, complete with retaining straps
* Manuals, Certificates and Warranties: Original BUCK NEMO documentation with use and maintenance instructions included
* Inspected and Certified by our in-house laboratory

The Buck 122 Nemo is one of the most fascinating and collectible knives from Buck's early production history and represents an important chapter in the development of the American brand. Introduced in 1967, the Nemo was specifically designed as a professional diving knife for divers requiring a strong, powerful and dependable tool for use in marine environments.

The Nemo design would subsequently give rise to the celebrated Buck 124 Frontiersman. During the earliest stages of production, the two models were essentially identical in terms of knife construction and were distinguished primarily by their equipment: the 122 Nemo was supplied with a dedicated synthetic diving sheath designed to be strapped to the leg, whereas the Frontiersman was marketed with a traditional leather sheath for outdoor use.

The example offered here belongs to one of the rarest and most desirable configurations within the Nemo/Frontiersman family: the early 1967 commercial production with white Teflon spacers. According to historical documentation from the Buck Collectors Club, the estimated production for this configuration was only 300-500 examples.

Its construction details are highly distinctive: a black phenolic handle, thin white Teflon spacers, a robust stainless-steel guard and the characteristic one-piece stainless-steel bird's-beak pommel, complete with a lanyard hole at the end.

The blade marking is also significant for dating the knife. The ricasso bears the simple two-line “BUCK / U.S.A.” stamp, without the 122 model number. Buck introduced systematic model-number markings only in later years, making this early configuration immediately recognizable to knowledgeable collectors.

The large plain-edge blade is made from 440C stainless steel, one of the reference steels used by Buck during this period and selected for its strong cutting performance, toughness and good corrosion resistance. Nevertheless, the Nemo's intended underwater use required particularly careful maintenance after exposure to salt water, something Buck specifically emphasized in the documentation originally supplied with the knife.

This example retains its rare original Buck Nemo diving sheath, made from rigid synthetic material and complete with adjustable straps for attachment to the diver's leg. The presence of the Nemo-specific sheath is particularly important, as it distinguishes this configuration from the contemporary Buck 124 Frontiersman.

The set also retains the original large two-piece ivory-colored Buck Knife box, typical of the earliest production period, and most importantly the rare original “BUCK NEMO” instruction sheet, in which Buck explained the characteristics of the steel and provided specific instructions for proper blade maintenance following use in water.

The knife is in excellent condition considering its age. The blade retains a very uniform satin finish and shows no evident corrosion; the handle, guard and pommel are likewise very well preserved. Only minor surface marks consistent with almost sixty years of storage and handling are visible.

The original sheath is complete and in excellent overall condition, with normal superficial signs of age. The box shows more evident staining, yellowing and storage marks, entirely consistent with its age. The original documentation is present and further enhances the historical importance and completeness of this set.

A 1967 Buck 122 Nemo with white Teflon spacers is already a highly significant piece in Buck history; finding one still accompanied by its original diving sheath, box and BUCK NEMO documentation makes this example particularly desirable for a collection dedicated to early Buck knives, American military and professional knives, or the history of diving knives.

Intended use: Professional diving / Collection
Production type: Industrial
Brand: Buck Knives
Model: 122 Nemo
Year / Variant: 1967 - White Teflon Spacers
Country of manufacture: USA
Blade: 440C stainless steel
Blade profile: Clip Point / Bowie
Edge: Plain
Blade finish: Satin
Marking: Two-line BUCK / U.S.A., without model number
Handle: Black phenolic material
Spacers: White Teflon
Guard: Stainless steel
Pommel: One-piece stainless steel, bird's-beak profile with lanyard hole
Blade length: Approx. 159mm / 6.25"
Overall length: Approx. 298mm / 11.75"
Sheath: Original Buck Nemo synthetic diving sheath with adjustable leg straps
Box: Original two-piece ivory-colored Buck Knife box
Documentation: Original BUCK NEMO instruction and maintenance sheet
Estimated production of this variant: 300-500 examples according to historical Buck Collectors Club documentation
Notes: Rare 1967 example with white Teflon spacers, previously purchased and acquired from a private collection

The AP01 is an ultra-compact mini electric pump designed to quickly inflate and deflate air mattresses, camping pillows, vacuum bags, inflatable toys, and many other accessories. Thanks to its extremely compact size and weight of just 22 g, it can be easily carried in a backpack, pocket, or travel kit.

Equipped with USB-C power, it offers an airflow rate of up to 220 L/min and a maximum pressure of ±2.8 kPa, ensuring high performance in a pocket-sized format. The practical single-button control allows for intuitive one-handed use, while the sturdy polycarbonate (PC) body ensures durability and reliability even under heavy use.

Ideal for camping, hiking, travel, and outdoor activities, the AP01 combines lightness, convenience, and performance in a single device.

KEY FEATURES
Quick inflation and deflation with a single device
Maximum air pressure: ±2.8 kPa
Air flow rate up to 220 L/min
Powered via USB-C port (5V⎓2A)
Single-button design for simple and immediate use
Body made of durable PC material
Ultra-compact and ultra-lightweight
Shock-resistant up to 2 meters
Automatic shut-off after 20 minutes of continuous operation
Compatible with various accessories thanks to the 5 included nozzles

TECHNICAL SPECIFICATIONS
Model: AP01
Dimensions: 41 mm × Ø31 mm
Weight: 22 g (excluding accessories)
Inflation/deflation pressure: ±2.8 kPa
Air flow rate: 220 L/min
Power supply: USB-C (5V⎓2A)
Battery life: Up to 3 hours*
Material: Polycarbonate (PC)
Impact resistance:     Up to 2 m

*Battery life measured under laboratory conditions using a 10,000 mAh power bank. Results may vary depending on the power source and environmental conditions.

PACKAGE CONTENTS
AP01 Mini Electric Pump
Carrying case
5 interchangeable nozzles
USB-C ↔ USB-C charging cable

IDEAL FOR 
Camping mats
Inflatable pillows
Vacuum compression bags
Inflatable toys and accessories
Outdoor and travel gear

BENEFITS
Extremely lightweight and portable
Inflates and deflates quickly
Universal USB-C power supply
Sturdy, shock-resistant construction
Perfect for camping, hiking, and travel

When darkness falls, you need a tool capable of turning the night into absolute control: the Nitecore P17iX is designed for those who operate without compromise—a powerhouse of precision and reliability engineered to handle emergencies, tactical missions, and field operations.

Compact yet extraordinarily powerful in performance, it combines advanced technology, extended runtime, and military-grade durability in a flashlight designed to dominate any operational scenario.

KEY FEATURES

The P17iX delivers a maximum light output of 27,225 cd with a beam depth of up to 330 meters, making it suitable for nighttime search operations, professional use, and advanced tactical operations.

The dual rear switch system with ENGAGE button provides immediate access to the LUMIN SHIELD®, STROBE, and SEARCH tactical functions, while the side SET button allows for full control of brightness levels and custom configurations.

Rapid Lock™ technology enables the flashlight to be locked immediately, preventing accidental activation during transport.

Powered by the included NL2155HPi 21700 lithium-ion battery, the P17iX offers up to 100 hours of runtime at the 15-lumen LOW setting.

USB-C charging supports QC/PD fast charging with a charging time of approximately 2 hours using a compatible power adapter.

The P17iX features two main operating configurations: Duty mode for professional daily use and Tactical mode designed for advanced operational use.

The P17iX is constructed from 7075-T6 aerospace-grade aluminum alloy with a military-grade HA III anodized finish.

It can be used in any weather conditions thanks to its IP68 certification (waterproof and submersible up to 2 meters) and is impact-resistant from drops of up to 2 meters

TECHNICAL SPECIFICATIONS

LEDs: 4x M515S five-core LEDs
Operating Modes: 4 electronically regulated brightness levels + LUMIN SHIELD® + SEARCH + WARNING FLASH + STROBE
Power and Runtime: 5000 lumens LUMIN SHIELD® -> 2500 lumens SEARCH -> 1500 lumens (2h 30min.) -> 400 lumens (6h) -> 80 lumens (25h) -> 15 lumens (100h) -> 5000-lumen strobe
Peak output: 27,225 candelas
Maximum beam distance: 330m
Activation method: dual rear buttons (TAIL + ENGAGE) with tactical Momentary On function and side SET button for mode management and advanced settings
Light mode selection: with the flashlight on via the side SET button
Lighting modes: Flood / Mixed / Spotlight with independent memory for each brightness level
Head and Body: 7075-T6 aerospace-grade aluminum alloy
Finish: Military-grade HA III anodized
Lens: Ultra-clear glass with scratch-resistant and anti-reflective coating
Batteries: Operates with a Nitecore 21700 i-series NL2155HPi 5,500mAh rechargeable battery (included) and is compatible with CR123/RCR123
Charging: Integrated USB-C port with QC/PD fast charging up to 18W
Dimensions: 14 cm (L) - 2.6 cm (barrel diameter) - 2.68 cm (head diameter)
Weight: 101 g (batteries not included)
Accessories: NTH17 tactical holster, clip, spare O-ring, CR123 adapter, USB-C cable with lanyard
Water resistance: IP68 standard, submersible up to 2 meters deep
Holster: NTH17 tactical plastic holster with burnished stainless steel mounting clip
Impact resistance: withstands drops from a height of 2 meters
Nitecore Italia Warranty: Flashlight covered by a 5-year warranty - Battery covered by a 12-month warranty

The NITECORE HLB2500 2,500 mAh all-weather battery pack is designed to operate at temperatures as low as -40 °C (-40 °F) and at altitudes of up to 10,000 metres, with an IPX8 waterproof rating.

It features a USB-C charging port and multiple protection mechanisms, and complies with various international certifications.

Compatible with headlamps such as the NITECORE HA29 UHE and HA27 UHE, it provides stable power in challenging environments, including high-altitude mountaineering, snow sports, winter hiking and outdoor expeditions.

TECHNICAL SPECIFICATIONS
Capacity: 2,500 mAh
Rechargeable via USB-C
Withstands over 500 charge cycles
Voltage: 3.7V
Li-ion (lithium-ion) technology
Waterproof to IPX8 standard
Suitable for use in harsh climates, down to -40°C
Suitable for use at high altitudes, up to 10,000m

COMPATIBILITY
*NITECORE HA27 UHE
*NITECORE HA29 UHE

Precautions:
* Do not leave batteries unattended whilst charging
* Do not charge on carpets, wooden tables or flammable materials
* We are not liable for damage resulting from tampering with the batteries
* We are not liable for incorrect use or reverse polarity of the batteries

Compact, lightweight, and high-performance, this power bank combines a carbon fiber unibody construction with magnesium alloy heat sinks to ensure durability, thermal efficiency, and maximum reliability. The high-energy-density lithium-ion battery offers optimized real-world capacity for extended use, while maintaining an extremely compact form factor.

With an energy density of 242.5 mWh/g and an advanced design that reduces bulk and weight, it is approximately 28% lighter and more compact than traditional 20,000mAh power banks. Furthermore, thanks to 67.5Wh of usable energy, it offers approximately 22% more runtime than equivalent models on the market.

Equipped with dual high-power USB-C ports up to 65W, it supports fast charging and intelligent power management, making it ideal for mobile devices, tablets, and compact laptops. The IPX8 waterproof design and reinforced construction also make it suitable for professional and outdoor use.

Key Features:
High-capacity power bank with lithium-ion battery
Output up to 65W with USB-C Power Delivery support
Dual independent high-performance USB-C ports
USB-C input up to 65W for fast device charging
PD fast charging support
Pass-through charging function (can charge a device while the power bank is charging)
Display screen with battery percentage indicator
IP68 water-resistant certification
Intelligent power management system

Technical Specifications:
Cell: Lithium-ion
Battery capacity: 76Wh / 77.6Wh (15.52V)
Nominal capacity: 13,500mAh 5V (TYP 3A)
USB-C input (IN): 5V⎓3A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓3.25A (65W MAX)
USB-C Output (OUT1 / OUT2): 5V⎓3A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓3.25A (65W MAX)
Total Output: 5V⎓3A (15W MAX in shared mode)
Waterproof rating: IP68
Dimensions: 128mm x 48mm x 29mm
Weight: 320g ±5g
Included accessories: USB-C to USB-C cable

Compact, lightweight, and high-performance, this power bank combines a carbon fiber unibody construction with magnesium alloy heat sinks to ensure durability, thermal efficiency, and maximum reliability. The high-energy-density lithium-ion battery offers optimized real-world capacity for extended use, while maintaining an extremely compact form factor.

With an energy density of 242.5 mWh/g and an advanced design that reduces bulk and weight, it is approximately 28% lighter and more compact than traditional 20,000mAh power banks. Furthermore, thanks to 67.5Wh of usable energy, it offers approximately 22% more runtime than equivalent models on the market.

Equipped with dual high-power USB-C ports up to 65W, it supports fast charging and intelligent power management, making it ideal for mobile devices, tablets, and compact laptops. The IPX8 waterproof design and reinforced construction also make it suitable for professional and outdoor use.

Key Features:
High-capacity power bank with lithium-ion battery
Output up to 65W with USB-C Power Delivery support
Dual independent high-performance USB-C ports
USB-C input up to 65W for fast device charging
PD fast charging support
Pass-through charging function (can charge a device while the power bank is charging)
Display screen with battery percentage indicator
IP68 water-resistant certification
Intelligent power management system

Technical Specifications:
Cell: Lithium-ion
Battery capacity: 76Wh / 77.6Wh (15.52V)
Nominal capacity: 13,500mAh 5V (TYP 3A)
USB-C input (IN): 5V⎓3A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓3.25A (65W MAX)
USB-C Output (OUT1 / OUT2): 5V⎓3A / 9V⎓3A / 12V⎓3A / 15V⎓3A / 20V⎓3.25A (65W MAX)
Total Output: 5V⎓3A (15W MAX in shared mode)
Waterproof rating: IP68
Dimensions: 128mm x 48mm x 29mm
Weight: 320g ±5g
Included accessories: USB-C to USB-C cable

When darkness falls, you need a tool capable of turning the night into absolute control: the Nitecore P27iX is designed for those who operate without compromise—a powerhouse of precision and reliability engineered to handle emergencies, tactical missions, and field operations.

Compact yet extraordinarily powerful in performance, it combines advanced technology, extended runtime, and military-grade durability in a flashlight designed to dominate any operational scenario.

KEY FEATURES
* The P27iX delivers a maximum light output of 46,320 cd with a beam depth of up to 430 meters, making it suitable for nighttime search operations, professional use, and advanced tactical operations.
* The dual rear switch system with ENGAGE button provides immediate access to the LUMIN SHIELD®, STROBE, and SEARCH tactical functions, while the side SET button allows for full control of brightness levels and custom configurations.
* Rapid Lock™ technology allows for immediate locking of the flashlight, preventing accidental activation during transport.
* The stainless steel front bezel with silicon nitride ceramic inserts also allows for rapid glass breaking in emergency situations.
* Powered by the included NL2155HPi 21700 lithium-ion battery, the P27iX offers up to 100 hours of runtime at the 15-lumen LOW setting.
* USB-C charging supports QC/PD fast charging with a charging time of approximately 2 hours using a compatible power adapter.
* The P27iX features two main operating configurations: Duty mode for professional daily use and Tactical mode designed for advanced operational use.
* The P27iX is constructed from 7075-T6 aerospace-grade aluminum alloy with a military-grade HA III anodized finish.
* It can be used in any weather conditions thanks to its IP68 certification (waterproof and submersible up to 2 meters) and is impact-resistant from drops of up to 2 meters

TECHNICAL SPECIFICATIONS
LEDs: 4x M515S five-core LEDs
Operating Modes: 4 electronically regulated brightness levels + LUMIN SHIELD® + SEARCH + WARNING FLASH + STROBE
Power and Runtime: 5000 lumens LUMIN SHIELD® -> 2500 lumens SEARCH -> 1500 lumens (2h 30min.) -> 400 lumens (6h) -> 80 lumens (25h) -> 15 lumens (100h) -> 5000-lumen strobe
Peak output: 46,320 candelas
Maximum beam distance: 430m
Ignition method: dual rear buttons TAIL + ENGAGE with tactical Momentary On function and side button SET for mode management and advanced settings
Light mode selection: with flashlight on via side button SET
Lighting modes: Flood / Mixed / Spotlight with independent memory for each brightness level
Head and Body: 7075-T6 aerospace-grade aluminum alloy
Finish: Military-grade HA III anodized
Lens: ultra-clear glass with scratch-resistant and anti-reflective coating
Batteries: operates with a Nitecore 21700 i-series NL2155HPi 5,500mAh rechargeable battery (included) and is compatible with CR123/RCR123
Charging: integrated USB-C port with QC/PD fast charging up to 18W
Dimensions: 14.3 cm (L) - 2.6 cm (body diameter) - 3.2 cm (head diameter)
Weight: 124 g without batteries - 201 g with battery
Accessories: NTH27 tactical holster, clip, spare O-ring, CR123 adapter, USB-C cable with lanyard
Waterproofing: IP68 standard, submersible up to 2 meters deep
Holster: NTH27 tactical plastic holster with burnished stainless steel mounting clip
Impact resistance: withstands drops from a height of 2 meters
Nitecore Italia Warranty: Flashlight covered by a 5-year warranty - Battery covered by a 12-month warranty

The Nitecore NL1816R is an 18350-format rechargeable lithium-ion battery, ideal for compact, high-performance devices. With a capacity of 1600mAh and a continuous discharge current of up to 3A, it delivers reliable, long-lasting power. Equipped with a built-in USB-C charging port, it allows for fast and convenient charging without the need for external chargers. Advanced protection circuits ensure safety against overcharging, deep discharge, and short circuits, making it an excellent choice for LED flashlights and other electronic devices.

Technical Specifications
Model: NL1816R
Format: 18350 (button top)
Capacity: 1600mAh
Nominal Voltage: 3.6V (3.96Wh)
Continuous Discharge Current: 3A
Charging Port: Integrated USB-C (5V, 0.5A)
Number of Charge Cycles: Over 500
Built-in protection: against overcharging, deep discharge, and short circuit
Safety valve: activates in case of rapid increase in internal pressure
External materials: nickel-plated stainless steel, abrasion-resistant coating
Dimensions: 40.8 ± 0.3 mm (length) x 18.5 ± 0.3 mm (diameter)
Weight: 27g
Certifications: CE, UL, RoHS
Warranty: 12 months
Compatibility

Compatible with most flashlights and devices that support 18350 batteries, including Nitecore models such as the MT1C Pro,

KEY FEATURES
* Maximum output of 360 lumens
* Features a primary white light (color temperature: 6,000K), a high-CRI auxiliary white light (CRI≥90, color temperature: 4,500K), and an auxiliary red light.
* Uses a multi-faceted unibody optical lens system
* Built-in 500mAh lithium-ion battery
* Built-in smart lithium-ion battery charging circuit with USB-C charging port
* Designed with two buttons for easy one-handed operation
* 7 brightness levels, 3 light sources, and 3 special modes available
* Designed with 4 power indicators to show remaining battery charge
* Made of durable PC material
* Highly elastic and adjustable headband for lightweight comfort and convenience
* Impact-resistant up to 1 meter
* IP66-rated water and dust resistance

TECHNICAL SPECIFICATIONS
LEDs: 2x NiteLab UHE LEDs (primary white light and secondary with CRI ≥ 90) + 1 red LED, all with a 50,000-hour lifespan
Operating Modes: 7 brightness levels, 3 light sources, and 3 special modes
Primary white light power and runtime: 360 lumens (2 hours) -> 200 lumens (5 hours) -> 37 lumens (7 hours) -> 1 lumen (97 hours) -> S.O.S. -> Beacon Light
Secondary white light power and runtime: 20 lumens (7 hours)
Red light power and runtime: 13 lumens (12 hours) -> 1 lumen (53 hours) -> Slow flashing
Peak brightness: 1600 candelas
Maximum illumination distance: 80 meters
Power On/Off and Mode Selection: Power button
Body: ABS
Battery: Built-in 500mAh Li-ion, rechargeable via USB-C port
Dimensions: 5.21 cm (L) - 3.31 cm (W) - 2.44 cm (H)
Weight: 38g. - elastic headband included
Accessories included in the package: headlamp with mounting bracket, elastic headband, USB-C charging cable
Water resistance: IP66 rated
Impact resistance: withstands drops from a height of 1m
Notes: -

Product Introduction.
Discover the power and versatility of our multifunctional flashlight, powered by 3 AAA alkaline batteries. With a maximum output of 600 lumens and 3 different color temperatures (warm, neutral and cool light), it is ideal for any situation. The auxiliary red light provides additional visibility, while its shock and water resistance (IP68) makes it perfect for harsh conditions. With a maximum range of 132 meters and a battery life of up to 125 hours, this flashlight is designed for durability and excellent performance. Easy to use with one hand and compatible with different types of batteries, it is the must-have accessory for any adventure.

Key Features.
MAXIMUM POWER: 600 lumens
LED TECHNOLOGY: Uses dual-core UHE MCT LEDs (Patent No. CN202323108231.8), with 3 color temperatures (3,000K warm light, 4,500K neutral white light, 6,500K cool white light) and auxiliary red light.
RANGE AND DISTANCE: Maximum distance of 132 meters.
MAXIMUM AUTONOMY: Up to 125 hours.
COMPATIBLE BATTERIES: Uses 3 AAA alkaline batteries (included), Ni-MH batteries, lithium-iron batteries or the NITECORE HLB1500 lithium-ion battery pack purchased separately.
DESIGN AND DURABILITY: Shock resistant up to 1 meter and made of special PC plastic with low temperature resistance.
WATERPROOFABILITY: Degree of water resistance and dust resistance according to IP68 standard.
EASY USE: Designed with two buttons that differ in shape and touch for easy one-handed operation.

FL1 Standard Data.
Primary Light (Neutral White Light / Warm Light / Cold White Light)
HIGH: 600 lumens - Autonomy: 1h 30min - Distance: 132m - Intensity: 4,364cd
MID: 280 lumens - Autonomy: 2h 30min - Distance: 94m - Intensity: 2,197cd
LOW: 100 lumens - Autonomy: 8h - Distance: 54m - Intensity: 722cd
ULTRALOW: 6 lumens - Autonomy: 97h - Distance: 14m - Intensity: 47cd
Auxiliary Red Light
HIGH: 15 lumens - Autonomy: 13h - Distance: 5m - Intensity: 7cd
LOW: 5 lumens - Autonomy: 31h - Distance: 4m - Intensity: 3cd
SLOW FLASH: 15 lumens - Autonomy: -
SOS: 600 lumens - Autonomy: -
BEACON: 600 lumens - Autonomy: -

Technical Specifications.
Dimensions: 60.2 mm x 46.7 mm x 34.2 mm (2.37“ x 1.84” x 1.35")
Weight: 90 g (3 AAA alkaline batteries and headband included) / 56 g (1.98 oz) with headband included

Accessories Included
3x AAA alkaline batteries
Headband
Diffusion pouch
Clip

Product Introduction.
Discover the power and versatility of our multifunctional flashlight, powered by 3 AAA alkaline batteries. With a maximum output of 600 lumens and 3 different color temperatures (warm, neutral and cool light), it is ideal for any situation. The auxiliary red light provides additional visibility, while its shock and water resistance (IP68) makes it perfect for harsh conditions. With a maximum range of 132 meters and a battery life of up to 125 hours, this flashlight is designed for durability and excellent performance. Easy to use with one hand and compatible with different types of batteries, it is the must-have accessory for any adventure.

Key Features.
MAXIMUM POWER: 600 lumens
LED TECHNOLOGY: Uses dual-core UHE MCT LEDs (Patent No. CN202323108231.8), with 3 color temperatures (3,000K warm light, 4,500K neutral white light, 6,500K cool white light) and auxiliary red light.
RANGE AND DISTANCE: Maximum distance of 132 meters.
MAXIMUM AUTONOMY: Up to 125 hours.
COMPATIBLE BATTERIES: Uses 3 AAA alkaline batteries (included), Ni-MH batteries, lithium-iron batteries or the NITECORE HLB1500 lithium-ion battery pack purchased separately.
DESIGN AND DURABILITY: Shock resistant up to 1 meter and made of special PC plastic with low temperature resistance.
WATERPROOFABILITY: Degree of water resistance and dust resistance according to IP68 standard.
EASY USE: Designed with two buttons that differ in shape and touch for easy one-handed operation.

FL1 Standard Data.
Primary Light (Neutral White Light / Warm Light / Cold White Light)
HIGH: 600 lumens - Autonomy: 1h 30min - Distance: 132m - Intensity: 4,364cd
MID: 280 lumens - Autonomy: 2h 30min - Distance: 94m - Intensity: 2,197cd
LOW: 100 lumens - Autonomy: 8h - Distance: 54m - Intensity: 722cd
ULTRALOW: 6 lumens - Autonomy: 97h - Distance: 14m - Intensity: 47cd
Auxiliary Red Light
HIGH: 15 lumens - Autonomy: 13h - Distance: 5m - Intensity: 7cd
LOW: 5 lumens - Autonomy: 31h - Distance: 4m - Intensity: 3cd
SLOW FLASH: 15 lumens - Autonomy: -
SOS: 600 lumens - Autonomy: -
BEACON: 600 lumens - Autonomy: -

Technical Specifications.
Dimensions: 60.2 mm x 46.7 mm x 34.2 mm (2.37“ x 1.84” x 1.35")
Weight: 90 g (3 AAA alkaline batteries and headband included) / 56 g (1.98 oz) with headband included

Accessories Included
3x AAA alkaline batteries
Headband
Diffusion pouch
Clip

The Nitecore EMR16 is a portable electronic mosquito repeller designed to provide effective protection against mosquitoes during any outdoor activity. Compact, lightweight, and easy to use, it creates a protected zone of up to 5 meters in about 10 minutes, ensuring comfort and peace of mind while camping, hiking, or enjoying time outdoors.

Equipped with a built-in 5,200 mAh rechargeable battery, it provides up to 5 hours of runtime and charges via USB-C, making it ideal for travel and extended use.

High-efficiency heating technology activates the repellent plates without flames or liquids, offering a safe, clean, and portable solution. The rugged construction with IPX5 water resistance and the clip-and-carabiner design make it perfect for any outdoor adventure.

TECHNICAL SPECIFICATIONS
Water resistance: IPX5
USB-C input: 5V - 2A (5W MAX)
Built-in battery: 5,200 mAh Li-ion / 3.7 V / (19.24 Wh)
Heating plate temperature: 180°C
Protection range: approx. 5m.
Dimensions: 136x55x27 mm. 
Weight: 180g. +/- 5g.

PACKAGE CONTENTS
* Nitecore EMR16
* USB-C charging cable
* Double carabiner hook

Compact, powerful, versatile. The EDC07 features two quad-core UHE MCT LEDs capable of reaching 1,500 lumens with a maximum intensity of 4,410 cd and a range of up to 132 meters. The three selectable color temperatures — 6,500K (CRI 73), 4,500K (CRI 83), and 3,000K (CRI 97) — allow you to adapt the light output to any context, from maximum contrast to superior color fidelity.

It offers 5 brightness levels, ULTRALOW mode, STROBE mode with random frequencies for greater disorientation, and SOS mode, with integrated memory of the selected level and temperature. The dual TIR optical lenses generate a soft, uniform beam, while the constant current circuit and ATR (Advanced Temperature Regulation) module ensure stable output and optimized thermal management.

Powered by a built-in 1,500 mAh Li-ion battery, it provides up to 360 hours of runtime and a full recharge in approximately 1 hour and 15 minutes via USB-C, with an intelligent charging system and integrated level indicators. APC technology reduces standby consumption for up to 12 months of battery life.

Built from high-performance PC, shock-resistant up to 2 meters and IP67 certified against water and dust, it weighs only 70 g (120 × 31 × 21 mm with clip). A rear button for instant power-up, a front M button for total control, a stainless steel clip and included accessories complete a flashlight designed for professional performance in an EDC format.

KEY FEATURES

* Equipped with three color temperatures: cool 6,500K (CRI 73), neutral 4,500K (CRI 83), warm 3,000K (CRI 97)
* Strobe and SOS modes
* Adopts dual TIR optical lenses for a soft, uniform beam
* Peak beam intensity of 4410 cd and maximum range of 132 meters
* Powered by a built-in 1500mAh lithium-ion battery to provide up to 360 hours of runtime
* Advanced Power Cut-Off (APC) technology for extremely low standby power consumption
* Built-in Advanced Temperature Regulation (ATR) module (patent no. ZL201510534543.6)
* Includes a stainless steel clip
* High-performance polymer body
* USB-C/USB-C charging cable and wrist strap included in the package

TECHNICAL DATA
LEDs: 2x UHE Quad Core MCT white light with 3 different light tones (warm/cool/neutral), with a life cycle of 50,000 hours
Operating modes: 5 electronically adjusted light powers for all tones + Strobe and SOS
Cold Light Powers and Durations: 1500 Lumens (2.15h.) -> 300 Lumens (2.45h.) -> 80 Lumens (11h.) -> 15 Lumens (52h.) -> 1 Lumen (360h.)
Warm Light Power and Duration: 1000 Lumens (2.15h.) -> 220 Lumens (2.45h.) -> 55 Lumens (11h.) -> 11 Lumens (52h.) -> 1 Lumen (360h.)
Neutral Light Power and Duration: 1300 Lumens (2.15h.) -> 260 Lumens (2.45h.) -> 65 Lumens (11h.) -> 13 Lumens (52h.) -> 1 Lumen (360h.)
Peak power: 4410 candelas at 1500 Lumens (with cold light)
Maximum illumination distance: 132m at 1500 Lumens (with cold light)
Switching and brightness selection method: Rear button on the tail of the torch
Brightness and light temperature selection method: Multi-purpose front button
Head and body: High-strength polymer material
Lens: TIR optics
Battery: Rechargeable, integrated, non-removable Li-Ion, 1500mAh
Dimensions: 120mm (length) - 31mm (width) - 21mm (Thickness)
Weight: 70g.
Included accessories: integrated stainless steel clip, wrist strap, USB-C/USB-C charging cable
Waterproof: IP67 standard
Impact resistance: withstands drops from up to 2m
Notes: Equipped with front indicator lights that show the battery charge status

The TIP3 from NITECORE combines advanced technology and high performance in an ultra-compact format designed for everyday use. The 4-core UHE MCT LED delivers up to 720 lumens and allows you to choose between three color temperatures (3,000K warm light, 4,500K neutral white, 6,500K cool white), adapting the lighting to any situation. The TIR optical lens ensures a uniform and soft beam, with a maximum intensity of 2,117 candelas and a range of up to 92 meters.

The integrated 650 mAh lithium-ion battery provides up to 160 hours of runtime and is supported by a smart charging circuit with USB-C port. APC (Advanced Power Cut-Off) technology minimizes standby consumption, while the constant current circuit provides stable and reliable output. The ATR (Advanced Temperature Regulation) system automatically optimizes performance based on operating conditions.

The dual-button interface allows for intuitive control with 5 brightness levels and direct access to TURBO mode, as well as a memory function for brightness and color temperature. Semi-lock and full-lock modes are available, with integrated indicators for battery level and lock status.

Constructed of aluminum alloy with a military-grade HA III hard anodized finish, the TIP3 is impact resistant up to 2 meters and IP54 certified against water and dust. Compact (62 × 26 × 15 mm) and lightweight (30 g), it includes a keyring clip, clip, and USB-C charging cable: a professional, robust, and always ready-to-use solution.

KEY FEATURES
* Uses quad-core UHE MCT (Multiple Color Temperatures) LEDs with a maximum output of 720 lumens
* Equipped with 3 color temperatures (3,000 K warm light / 4,500 K neutral white light / 6,500 K cool white light)
* Offers 5 brightness levels for each color temperature with instant access to TURBO mode
* Maximum beam intensity of 2,117 cd and maximum range of 92 meters
* Designed with a TIR optical lens to provide uniform, soft light
* Indicator lights to display battery level and lock status
* Built-in 650 mAh lithium-ion battery, providing up to 160 hours of battery life
* Advanced Power Cut-Off (APC) technology for ultra-low power consumption in standby mode
* Integrated smart lithium-ion battery charging circuit with USB-C charging port
* Smart memory function for color temperature and brightness level
* Semi-lock mode and full lock mode available
* Metal rear ring capable of supporting up to 30 kilograms of weight
* Made of aluminum alloy with military-grade HA III hard anodized finish
* Waterproof and dustproof to IP54 standard

TECHNICAL DATA
LEDs: 2x UHE MCT Quad-Core with a life cycle of 50,000 hours
Operating modes: 5 electronically regulated light outputs and variable color temperature
Outputs and runtimes: 720 lumens (/) -> 220 lumens (1.45h.) -> 65 lumens (6h.) -> 15 lumens (16h.) -> 1 lumen (160h.)
Peak power: 2117 candelas at 720 lumens
Maximum illumination distance: 92m at 720 lumens
Switching method: Dedicated button
Light selection method: Multifunction button
Head and body: Aluminum alloy
Finish: HA III grade anodization
Lens: Synthetic optics, TIR type
Battery: 650mAh rechargeable Li-Ion, integrated and non-removable
Dimensions: 62mm (length) - 26mm (width) - 15mm (thickness)
Weight: 30g.
Included accessories: key clip, plastic clip, USB-C charging cable
Water resistance: IP54 standard
Impact resistance: withstands drops from up to 2m
Notes: can also operate while charging via USB-C port - rear key ring can withstand up to 30kg

The Nitecore Pocket 5 is a compact magnetic power bank designed for wired charging of mobile devices. At just 9 mm thick and weighing 125 g, it features a slim, portable design, ideal for everyday use on the go.

It has a capacity of 5,000 mAh with an output of 22.5 Wh. The device features a magnetic attachment system that ensures a stable connection with compatible smartphones, guaranteeing efficient charging via a USB-C cable—a choice made to prevent devices from overheating.

The power bank can be charged via both the integrated cable and the USB-C port, with power up to 18 W. When stowed in the body, the integrated cable forms a loop that can be conveniently used as a carrying handle.

Pass-through charging is supported, allowing the power bank and the connected device to be charged simultaneously. The device is IPX7-certified for water resistance and guarantees operation within a temperature range of -10°C to 35°C.

Key Features:

Body Material: Anodized aerospace-grade aluminum and polymers
Cable Material: Braided nylon, with anodized aerospace-grade aluminum plugs
Dimensions: 102x70x9 mm
Capacity: 5,000mAh / 3.87V / (19.35Wh)
Rated capacity: 3,400mAh at 5V (TYP 2.4A)
Input: USB-C (C1) / (C2): 5V⎓2.4A / 9V⎓2A (18W MAX)
Output: USB-C (C1) / (C2): 5V⎓2.4A / 9V⎓2.22A / 12V⎓1.67A / 10V⎓2.25A (22.5W MAX)
Total Output: 5V⎓3A (15W MAX)
Weight: 125g +/- 5g.
Water resistance rating: IPX7
Attachment system: 10N magnetic, compatible with iPhone, MagSafe cases, or via the adhesive metal ring included in the package
Package contents: Power bank with integrated USB-C cable, adhesive metal ring for devices not natively compatible

The Nitecore Pocket 5 is a compact magnetic power bank designed for wired charging of mobile devices. At just 9 mm thick and weighing 125 g, it features a slim, portable design, ideal for everyday use on the go.

It has a capacity of 5,000 mAh with an output of 22.5 Wh. The device features a magnetic attachment system that ensures a stable connection with compatible smartphones, guaranteeing efficient charging via a USB-C cable—a choice made to prevent devices from overheating.

The power bank can be charged via both the integrated cable and the USB-C port, with power up to 18 W. When stowed in the body, the integrated cable forms a loop that can be conveniently used as a carrying handle.

Pass-through charging is supported, allowing the power bank and the connected device to be charged simultaneously. The device is IPX7-certified for water resistance and guarantees operation within a temperature range of -10°C to 35°C.

Key Features:

Body Material: Anodized aerospace-grade aluminum and polymers
Cable Material: Braided nylon, with anodized aerospace-grade aluminum plugs
Dimensions: 102x70x9 mm
Capacity: 5,000mAh / 3.87V / (19.35Wh)
Rated capacity: 3,400mAh at 5V (TYP 2.4A)
Input: USB-C (C1) / (C2): 5V⎓2.4A / 9V⎓2A (18W MAX)
Output: USB-C (C1) / (C2): 5V⎓2.4A / 9V⎓2.22A / 12V⎓1.67A / 10V⎓2.25A (22.5W MAX)
Total Output: 5V⎓3A (15W MAX)
Weight: 125g +/- 5g.
Water resistance rating: IPX7
Attachment system: 10N magnetic, compatible with iPhone, MagSafe cases, or via the adhesive metal ring included in the package
Package contents: Power bank with integrated USB-C cable, adhesive metal ring for devices not natively compatible

The Nitecore Pocket 5 is a compact magnetic power bank designed for wired charging of mobile devices. At just 9 mm thick and weighing 125 g, it features a slim, portable design, ideal for everyday use on the go.

It has a capacity of 5,000 mAh with an output of 22.5 Wh. The device features a magnetic attachment system that ensures a stable connection with compatible smartphones, guaranteeing efficient charging via a USB-C cable—a choice made to prevent devices from overheating.

The power bank can be charged via both the integrated cable and the USB-C port, with power up to 18 W. When stowed in the body, the integrated cable forms a loop that can be conveniently used as a carrying handle.

Pass-through charging is supported, allowing the power bank and the connected device to be charged simultaneously. The device is IPX7-certified for water resistance and guarantees operation within a temperature range of -10°C to 35°C.

Key Features:

Body Material: Anodized aerospace-grade aluminum and polymers
Cable Material: Braided nylon, with anodized aerospace-grade aluminum plugs
Dimensions: 102x70x9 mm
Capacity: 5,000mAh / 3.87V / (19.35Wh)
Rated capacity: 3,400mAh at 5V (TYP 2.4A)
Input: USB-C (C1) / (C2): 5V⎓2.4A / 9V⎓2A (18W MAX)
Output: USB-C (C1) / (C2): 5V⎓2.4A / 9V⎓2.22A / 12V⎓1.67A / 10V⎓2.25A (22.5W MAX)
Total Output: 5V⎓3A (15W MAX)
Weight: 125g +/- 5g.
Water resistance rating: IPX7
Attachment system: 10N magnetic, compatible with iPhone, MagSafe cases, or via the adhesive metal ring included in the package
Package contents: Power bank with integrated USB-C cable, adhesive metal ring for devices not natively compatible

Compact, powerful, versatile. The EDC07 features two quad-core UHE MCT LEDs capable of reaching 1,500 lumens with a maximum intensity of 4,410 cd and a range of up to 132 meters. The three selectable color temperatures — 6,500K (CRI 73), 4,500K (CRI 83), and 3,000K (CRI 97) — allow you to adapt the light output to any context, from maximum contrast to superior color fidelity.

It offers 5 brightness levels, ULTRALOW mode, STROBE mode with random frequencies for greater disorientation, and SOS mode, with integrated memory of the selected level and temperature. The dual TIR optical lenses generate a soft, uniform beam, while the constant current circuit and ATR (Advanced Temperature Regulation) module ensure stable output and optimized thermal management.

Powered by a built-in 1,500 mAh Li-ion battery, it provides up to 360 hours of runtime and a full recharge in approximately 1 hour and 15 minutes via USB-C, with an intelligent charging system and integrated level indicators. APC technology reduces standby consumption for up to 12 months of battery life.

Built from high-performance PC, shock-resistant up to 2 meters and IP67 certified against water and dust, it weighs only 70 g (120 × 31 × 21 mm with clip). A rear button for instant power-up, a front M button for total control, a stainless steel clip and included accessories complete a flashlight designed for professional performance in an EDC format.

KEY FEATURES

* Equipped with three color temperatures: cool 6,500K (CRI 73), neutral 4,500K (CRI 83), warm 3,000K (CRI 97)
* Strobe and SOS modes
* Adopts dual TIR optical lenses for a soft, uniform beam
* Peak beam intensity of 4410 cd and maximum range of 132 meters
* Powered by a built-in 1500mAh lithium-ion battery to provide up to 360 hours of runtime
* Advanced Power Cut-Off (APC) technology for extremely low standby power consumption
* Built-in Advanced Temperature Regulation (ATR) module (patent no. ZL201510534543.6)
* Includes a stainless steel clip
* High-performance polymer body
* USB-C/USB-C charging cable and wrist strap included in the package

TECHNICAL DATA
LEDs: 2x UHE Quad Core MCT white light with 3 different light tones (warm/cool/neutral), with a life cycle of 50,000 hours
Operating modes: 5 electronically adjusted light powers for all tones + Strobe and SOS
Cold Light Powers and Durations: 1500 Lumens (2.15h.) -> 300 Lumens (2.45h.) -> 80 Lumens (11h.) -> 15 Lumens (52h.) -> 1 Lumen (360h.)
Warm Light Power and Duration: 1000 Lumens (2.15h.) -> 220 Lumens (2.45h.) -> 55 Lumens (11h.) -> 11 Lumens (52h.) -> 1 Lumen (360h.)
Neutral Light Power and Duration: 1300 Lumens (2.15h.) -> 260 Lumens (2.45h.) -> 65 Lumens (11h.) -> 13 Lumens (52h.) -> 1 Lumen (360h.)
Peak power: 4410 candelas at 1500 Lumens (with cold light)
Maximum illumination distance: 132m at 1500 Lumens (with cold light)
Switching and brightness selection method: Rear button on the tail of the torch
Brightness and light temperature selection method: Multi-purpose front button
Head and body: High-strength polymer material
Lens: TIR optics
Battery: Rechargeable, integrated, non-removable Li-Ion, 1500mAh
Dimensions: 120mm (length) - 31mm (width) - 21mm (Thickness)
Weight: 70g.
Included accessories: integrated stainless steel clip, wrist strap, USB-C/USB-C charging cable
Waterproof: IP67 standard
Impact resistance: withstands drops from up to 2m
Notes: Equipped with front indicator lights that show the battery charge status

The TIP3 from NITECORE combines advanced technology and high performance in an ultra-compact format designed for everyday use. The 4-core UHE MCT LED delivers up to 720 lumens and allows you to choose between three color temperatures (3,000K warm light, 4,500K neutral white, 6,500K cool white), adapting the lighting to any situation. The TIR optical lens ensures a uniform and soft beam, with a maximum intensity of 2,117 candelas and a range of up to 92 meters.

The integrated 650 mAh lithium-ion battery provides up to 160 hours of runtime and is supported by a smart charging circuit with USB-C port. APC (Advanced Power Cut-Off) technology minimizes standby consumption, while the constant current circuit provides stable and reliable output. The ATR (Advanced Temperature Regulation) system automatically optimizes performance based on operating conditions.

The dual-button interface allows for intuitive control with 5 brightness levels and direct access to TURBO mode, as well as a memory function for brightness and color temperature. Semi-lock and full-lock modes are available, with integrated indicators for battery level and lock status.

Constructed of aluminum alloy with a military-grade HA III hard anodized finish, the TIP3 is impact resistant up to 2 meters and IP54 certified against water and dust. Compact (62 × 26 × 15 mm) and lightweight (30 g), it includes a keyring clip, clip, and USB-C charging cable: a professional, robust, and always ready-to-use solution.

KEY FEATURES
* Uses quad-core UHE MCT (Multiple Color Temperatures) LEDs with a maximum output of 720 lumens
* Equipped with 3 color temperatures (3,000 K warm light / 4,500 K neutral white light / 6,500 K cool white light)
* Offers 5 brightness levels for each color temperature with instant access to TURBO mode
* Maximum beam intensity of 2,117 cd and maximum range of 92 meters
* Designed with a TIR optical lens to provide uniform, soft light
* Indicator lights to display battery level and lock status
* Built-in 650 mAh lithium-ion battery, providing up to 160 hours of battery life
* Advanced Power Cut-Off (APC) technology for ultra-low power consumption in standby mode
* Integrated smart lithium-ion battery charging circuit with USB-C charging port
* Smart memory function for color temperature and brightness level
* Semi-lock mode and full lock mode available
* Metal rear ring capable of supporting up to 30 kilograms of weight
* Made of aluminum alloy with military-grade HA III hard anodized finish
* Waterproof and dustproof to IP54 standard

TECHNICAL DATA
LEDs: 2x UHE MCT Quad-Core with a life cycle of 50,000 hours
Operating modes: 5 electronically regulated light outputs and variable color temperature
Outputs and runtimes: 720 lumens (/) -> 220 lumens (1.45h.) -> 65 lumens (6h.) -> 15 lumens (16h.) -> 1 lumen (160h.)
Peak power: 2117 candelas at 720 lumens
Maximum illumination distance: 92m at 720 lumens
Switching method: Dedicated button
Light selection method: Multifunction button
Head and body: Aluminum alloy
Finish: HA III grade anodization
Lens: Synthetic optics, TIR type
Battery: 650mAh rechargeable Li-Ion, integrated and non-removable
Dimensions: 62mm (length) - 26mm (width) - 15mm (thickness)
Weight: 30g.
Included accessories: key clip, plastic clip, USB-C charging cable
Water resistance: IP54 standard
Impact resistance: withstands drops from up to 2m
Notes: can also operate while charging via USB-C port - rear key ring can withstand up to 30kg

The TIP3 from NITECORE combines advanced technology and high performance in an ultra-compact format designed for everyday use. The 4-core UHE MCT LED delivers up to 720 lumens and allows you to choose between three color temperatures (3,000K warm light, 4,500K neutral white, 6,500K cool white), adapting the lighting to any situation. The TIR optical lens ensures a uniform and soft beam, with a maximum intensity of 2,117 candelas and a range of up to 92 meters.

The integrated 650 mAh lithium-ion battery provides up to 160 hours of runtime and is supported by a smart charging circuit with USB-C port. APC (Advanced Power Cut-Off) technology minimizes standby consumption, while the constant current circuit provides stable and reliable output. The ATR (Advanced Temperature Regulation) system automatically optimizes performance based on operating conditions.

The dual-button interface allows for intuitive control with 5 brightness levels and direct access to TURBO mode, as well as a memory function for brightness and color temperature. Semi-lock and full-lock modes are available, with integrated indicators for battery level and lock status.

Constructed of aluminum alloy with a military-grade HA III hard anodized finish, the TIP3 is impact resistant up to 2 meters and IP54 certified against water and dust. Compact (62 × 26 × 15 mm) and lightweight (30 g), it includes a keyring clip, clip, and USB-C charging cable: a professional, robust, and always ready-to-use solution.

KEY FEATURES
* Uses quad-core UHE MCT (Multiple Color Temperatures) LEDs with a maximum output of 720 lumens
* Equipped with 3 color temperatures (3,000 K warm light / 4,500 K neutral white light / 6,500 K cool white light)
* Offers 5 brightness levels for each color temperature with instant access to TURBO mode
* Maximum beam intensity of 2,117 cd and maximum range of 92 meters
* Designed with a TIR optical lens to provide uniform, soft light
* Indicator lights to display battery level and lock status
* Built-in 650 mAh lithium-ion battery, providing up to 160 hours of battery life
* Advanced Power Cut-Off (APC) technology for ultra-low power consumption in standby mode
* Integrated smart lithium-ion battery charging circuit with USB-C charging port
* Smart memory function for color temperature and brightness level
* Semi-lock mode and full lock mode available
* Metal rear ring capable of supporting up to 30 kilograms of weight
* Made of aluminum alloy with military-grade HA III hard anodized finish
* Waterproof and dustproof to IP54 standard

TECHNICAL DATA
LEDs: 2x UHE MCT Quad-Core with a life cycle of 50,000 hours
Operating modes: 5 electronically regulated light outputs and variable color temperature
Outputs and runtimes: 720 lumens (/) -> 220 lumens (1.45h.) -> 65 lumens (6h.) -> 15 lumens (16h.) -> 1 lumen (160h.)
Peak power: 2117 candelas at 720 lumens
Maximum illumination distance: 92m at 720 lumens
Switching method: Dedicated button
Light selection method: Multifunction button
Head and body: Aluminum alloy
Finish: HA III grade anodization
Lens: Synthetic optics, TIR type
Battery: 650mAh rechargeable Li-Ion, integrated and non-removable
Dimensions: 62mm (length) - 26mm (width) - 15mm (thickness)
Weight: 30g.
Included accessories: key clip, plastic clip, USB-C charging cable
Water resistance: IP54 standard
Impact resistance: withstands drops from up to 2m
Notes: can also operate while charging via USB-C port - rear key ring can withstand up to 30kg

Key Features
* Uses 6 dual-core UHE MCT (Multiple Color Temperatures) LEDs
* Equipped with primary lights offering three color temperatures (3,000 K warm light / 4,500 K neutral white light / 6,500 K cool white light) and auxiliary red lights
* Uses a unibody optical lens system with various facets
* Maximum power of 800 lumens and maximum range of 120 meters
* Includes a NITECORE HLB1500 lithium-ion battery pack, providing up to 88 hours of runtime
* Compatible with various AAA batteries
* Designed with two buttons that differ in shape and feel, allowing for easy one-handed operation
* 5 brightness levels, 3 special modes, and 2 brightness options for red light
* Power indicators for intuitive power indication
* Equipped with aluminum alloy heat sinks
* Made of special PC plastic that is impact and low temperature resistant
* Impact resistant up to 1 meter
* Waterproof to IP66 standard

LEDs: 6x UHE MCT LEDs with a life cycle of 50,000 hours and three different color temperatures (Warm/Neutral/Cool) + 2x auxiliary red LEDs
Output: 5x primary light outputs, 3x auxiliary red outputs, and 2x signaling modes, all digitally controlled
Primary light power and duration: 6 lumens (88h.)  -> 100 lumens (13h.) -> 280 lumens (6h.) -> 450 lumens (3.45h.) -> 800 lumens (2.30h.) -> Beacon -> SOS
Auxiliary red light power and duration: 5 lumens (70h.)  -> 15 lumens (14h.) -> flashing at 15 lumens
Range: up to 120m.
Peak power: 3611 candelas
Batteries: 1x Nitecore HLB1500 1500mAh battery pack (included) rechargeable via USB-C cable - also compatible with 3x 1.2/1.5V AAA alkaline batteries
Flashlight dimensions: 63x48x33mm. 
Weight: 91g. (with battery, mounting bracket, and elastic band)
Body: made of impact-resistant and low-temperature-resistant plastic
Strap: elastic, breathable, adjustable in diameter
Waterproof rating: IP66
Included in the package: HLB1500 USB-C rechargeable battery pack - elastic headband - light diffusion bag - clip

Key Features:
* Ultra-lightweight Li-Ion power bank with 10000mAh capacity
* Carbon fiber frame and panels
* Dual USB-C output channels
* 22.5W output from each USB-C port
* LED power level indicator
* Pass-through charging (can be recharged while charging other devices)

Compact in size, powerful in substance. The NB10000 Gen4 integrates a 10,000 mAh (39 Wh) Li-ion cell in just 140 g, offering nominal power up to 7,200 mAh at 5 V and USB-C charging/delivery up to 22.5 W. Dual USB-C output and pass-through charging ensure operational continuity, while IPX7 certification ensures water resistance in accidental conditions (not for underwater use).

The advanced touch interface with Knock-to-Wake activates smart indicators and dynamic RGB lighting; Normal and Eco modes (5V⎓1A) optimize performance based on the connected device. Multiple indicators accurately communicate status and charge level, while intelligent power management protects the battery from deep discharge.

Ultra-compact dimensions (116 × 46.8 × 14.5 mm), included lanyard cable, and total lighting control complete a power bank designed for those who demand technical efficiency, reliability, and character, wherever they go.

Technical Specifications:
* Capacity: 10000mAh / 3.9V / 39 Wh
* Nominal Energy: 6800mAh 5V (TYP 3 A) / 7200mAh 5V (TYP 1A)
* Dimensions: Length 116mm x Width 46.8mm x Height 14.5mm
* Weight: 143g +/- 5g
* USB-C Input: 5V-3A / 9V-2.22A / 12V-1.87A (22.5W MAX)
* USB-C output (OUT1) / (OUT2): 5V-3A / 9V-2.22A / 12V-1.87A (22.5W MAX)
* Waterproof rating: IPX7 (not designed for underwater use)
* Included accessories: USB-C/USB-C charging cable with lanyard

NB Plus is a high-performance, compact, and lightweight portable power bank, ideal for reliable charging in any situation.

Thanks to its slim design and IPX7-certified waterproofing, it offers protection against dust, water splashes, and temporary immersion, making it perfect for everyday and outdoor use.

TECHNICAL DATA
Cell type: Li-ion
Capacity: 10000mAh 3.85V (38.5Wh)
Nominal energy: 5600mAh 5V (TYP 3A)
Input: USB-C: 5V⎓3A / 9V⎓2A (18W MAX)
USB-C output: 5V⎓3A / 9V⎓2.22A / 12V⎓1.68A / 10V⎓2.28A (22.5W MAX)
USB-A output: 5V⎓3A / 9V⎓2A / 12V⎓1.5A / 10V⎓2.25A (22.5W MAX)
Total output: 5V⎓3A (15W MAX)
Waterproof rating: IPX7
Material: Self-supporting composite cell with carbon fiber outer cheeks
Dimensions: 122.4mm x 59.6mm x 11.7mm
Weight: 155g±5g
Note: The product does not include a charging cable and is not compatible with magnetic or induction charging systems.

Designed to offer maximum lighting versatility, this NITECORE headlamp uses four dual-core UHE MCT LEDs with three color temperatures (6,500 K, 4,500 K, and 3,000 K with high CRI) and auxiliary red lights. The multifaceted optical system ensures a uniform beam of up to 800 lumens and 150 m, while the removable modular battery with HLB1500 included (also compatible with AAA) ensures up to 65 hours of autonomy.

Robust and intuitive, it features dual buttons, charge indicators, a magnesium alloy heat sink, shock-resistant PC construction, and IPX6 protection for reliable use in any environment.

Key Features

* Uses four dual-core UHE MCT (Multiple Color Temperatures) LEDs
* Equipped with primary lights offering three color temperatures: 6,500 K cool white light (CRI 73), 4,500 K neutral white light (CRI 83), 3,000 K warm light (CRI 97)
* Designed with auxiliary red lights
* Uses a unibody optical lens system with various facets
* Maximum power of 800 lumens and maximum range of 150 meters
* Maximum runtime of 65 hours
* Equipped with a removable modular battery case
* Includes a NITECORE HLB1500 lithium-ion battery pack and is compatible with various AAA batteries
* Designed with two buttons of different shapes and feel for easy one-handed operation
* 5 brightness levels, 3 special modes, and 2 brightness options for red light
* Power indicators for intuitive indication of charge status
* Die-cast magnesium alloy heat sink for efficient heat dissipation
* Made of special PC plastic that is impact-resistant and low-temperature resistant
* Impact-resistant up to 1 meter
* Waterproof according to IPX6 standard

Weights and Dimensions

Dimensions: 73 × 43 × 38 mm (including bracket and battery case)
Weight: 75 g (battery case, bracket, and strap)
Weight with HLB1500 battery: 100 g (including case, bracket, and strap)

Included Accessories

MBC10 battery case
NITECORE HLB1500 lithium-ion battery pack
Bracket
Elastic band
Diffuser bag
Clip

Power Options

NITECORE HLB1500 rechargeable lithium-ion battery pack – 3.85 V – Compatible (recommended)
AAA alkaline primary battery – 1.5 V – Compatible
AAA Ni-MH rechargeable battery – 1.2 V – Compatible

Performance with HLB1500 rechargeable battery (included)

Primary light (white: neutral, warm, and cool)
Turbo: 800 lumens – 2 hours – 150 m – 5,632 cd
High: 500 lumens – 3 hours 30 min – 120 m – 3,628 cd
Mid: 280 lumens – 7 hours – 94 m – 2,197 cd
Low: 100 lumens – 15 hours – 54 m – 722 cd
Ultralow: 8 lumens – 65 hours – 15 m – 49 cd

Auxiliary red light
High: 15 lumens – 11 hours – 7 m – 15 cd
Low: 5 lumens – 34 hours and 30 min – 6 m – 5 cd

Special modes
Red flashing: 15 lumens
SOS: 800 lumens
Beacon: 800 lumens

Resistance

Impact resistance: 1 meter
Water resistance: IPX6

Designed for those who move quickly between city, work, and travel, the SLB08 Modular Sling Bag by Nitecore x Lii Gear is a compact bag that combines urban minimalism and tactical modularity. Ultra-lightweight (only 125 g) but surprisingly versatile, it adapts to any situation: from the subway to intercontinental flights, from cycling to evening strolls.

It's not just a simple sling bag: it's an expandable modular system that can grow with your daily needs.

Features

The SLB08 was created in the Lii Gear laboratory in Beijing, which has specialized in modular transport systems since 2014. Compact like a minimalist sling, expandable like a tactical platform.

Technical Data
Material: 500D nylon
Capacity: 2L
Dimensions: 27x4x16
Weight: 125g

Perfect for:
* Smartphone
* Power bank
* Earphones
* Wallet
* Passport and documents
* Keys and everyday EDC

The SLB08 can be used in five configurations:
* Sling bag
* Fanny pack
* Crossbody
* Utility pouch
* Additional bag attached to other backpacks

Structure and materials
* Scratch and abrasion-resistant 500D nylon
* Double-slider YKK zippers
* High-durability UTX buckles
* Quick-adjust strap that can be used with one hand

Smart organization
* Two transparent compartments with honeycomb mesh
* Internal divider separates phone, keys, and wallet
* Transparent front pocket for instant visibility
* Find what you need in a flash, even when you're in a hurry.

Document compartment
* The rear compartment in breathable transparent mesh allows you to:
* View your boarding pass and passport
* Pass through airport security without opening your bag

Modularity
The SLB08 features MOLLE webbing on:
* Sides
* Bottom
* Shoulder strap

You can:
* Attach flashlights
* Secure a bottle with elastic bands
* Add pouches and accessories
* Mount mosquito repellents or other outdoor tools

Perfect for travel
* Soft structure that folds flat in a suitcase or backpack
* Unfolds in seconds for everyday use once you arrive at your destination

What makes the SLB08 different
Proven design - Lii Gear is known for products such as Fugu Bomb and Mr. Octopus, which are appreciated for their build quality and functional design.

Transparent organization - Honeycomb mesh and clear front pocket allow you to check and locate contents immediately.

True modularity - Four rear attachment points and MOLLE compatibility for real integration with other systems.

Controlled craftsmanship - Made in small batches in the Lii Gear workshop, with attention to detail and manual quality control.

Genuine Nitecore elastic headband designed as a replacement part for headlamps compatible with a 25 mm mounting height (pitch). Made from high-quality materials, it guarantees wear resistance, long-lasting elasticity, and optimal comfort even during prolonged use.

The adjustable design ensures a perfect fit on the head, keeping the headlamp stable even during intense movement. The desert color, understated and technical, is ideal for outdoor, professional, and operational activities.

Key Features:

Original Nitecore replacement elastic headband
Height (pitch): 25 mm
High elasticity and long-lasting durability
Comfort and stability during use
Color: Desert

Compatibility:
Compatible with all headlamps equipped with a 25 mm headband and, specifically, with the following Nitecore models:
HA23, HA25, HA27, NU05, NU06, NU07, NU25, NU27.

Applications:
Ideal as a replacement for a worn headband or as a spare part to ensure the headlamp’s full efficiency in any usage scenario.