May 2015

Mini-Trapper is a fixed-blade outdoor knife that, thanks to its small size, can be carried comfortably in your pocket while hiking.

Made of Elmax steel with a hardness of 61 HRC, it is extremely durable and suitable for all uses, including hunting to process small prey. The groove on the back of the blade acts as a thumb gripper allowing the knife to be guided safely.

Mini-Trapper has a one-piece construction into which deer antler insignia are attached by steel screws.


Intended Use: Hunting / Hiking

Production type: Industrial
Country of manufacture: Italy
Blade: full tang in Elmax 61HRC steel
Blade treatment: Stonewashed
Handle: deer antler
Blade length: 65mm.
Blade thickness: 4mm.
Total length: 120mm.
Weight: 76g.
Sheath: leather
Packaging: cardboard box with Maserin logos
Notes: -

Intended Use: Utility / Hiking

Production type: Industrial
Country of Production: Italy
Blade: Full tang, D2 tool steel hardened to 58/61HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 115mm.
Blade thickness: 6mm.
Total length: 280mm.
Balance: advanced
Weight: 576g.
Sheath: kydex
Packaging: Cardboard box with Maserin logos
Notes: Design by Alessandro Olivetto

The product is an elaboration of the Japanese Wakizashi sword, a typical blade 30 to 60 centimeters long, which the Samurai carried at all times in contact with the body, where the Katana was carried exclusively in battle. The blade produced from Boehler N690 steel is hardened to 58HRC while the handle is made of forprene, an elastomer that falls under the "NATO standard" for resistance to extreme conditions. The Waki Black comes with a cordura, military-derived scabbard that ensures safe carrying of the razor-sharp blade and its protection from shocks that could reduce its efficiency. The scabbard is also equipped with the MOLLE system that allows it to be carried on tactical vests and general belts.

Intended Use: Tactical/Machete

Type of production: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co at 58HRC
Blade Treatment: Burnishing MIL-C-13924
Handle: Forprene
Blade Length: 297mm.
Blade thickness: 6.5mm. tapering to 4mm from the handle.
Total length: 456mm.
Weight: 384g.
Sheath: cordura, compatible with M.O.L.L.E. systems.
Packaging: cardboard box with Extrema Ratio logos
Notes: -

The collaboration with Attilio Morotti returns for the creation of this elegant knife of small size but with high strength thanks to the use of top-quality Swedish steel and expert craftsmanship finish. Useful on any occasion and convenient to carry at all times thanks to its magnetic leather sheath made in Italy.



Intended Use: Hunting/Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in Sandvik 14C28N stainless steel
Blade treatment: Satin finish, with rounded edges
Handle: Stabilized maple burl
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 151mm.
Weight: 56g.
Scabbard: pocket, leather, with magnetic clasp (no belt loops/hooks)
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

The collaboration with Attilio Morotti returns for the realization of this elegant knife of small size but with high strength thanks to the use of Swedish steel of excellent quality and skillful craftsmanship finish. Useful on any occasion and convenient to carry at all times thanks to its magnetic leather sheath made in Italy.


Intended Use: Hunting/Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: full tang in Sandvik 14C28N stainless steel
Blade treatment: Satin finish, with rounded edges
Handle: Stabilized maple burl
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 151mm.
Weight: 56g.
Scabbard: pocket, leather, with magnetic clasp (no belt loops/hooks)
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio Morotti

Intended Use: Utility / Hiking

Production type: Industrial
Country of Production: Italy
Blade: Full tang, tool steel D2
Blade Finish: Stonewashed
Handle: G-10
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 290mm.
Balance: slightly advanced
Weight: 412g.
Sheath: nylon, with thigh and belt attachments
Package: Cardboard box with Maserin logos - diamond sharpener - wire saw for wood
Note: Design by Davide Bomben, president of the Associazione Italiana Esperti d'Africa (Italian Association of African Experts) and chief instructor of the Poaching Prevention Academy, an organization that in Namibia and other African countries trains rangers against poachers. He is the director of training for the African Field Guides Association and for over ten years has worked with the tour operator Il Diamante and with Wilderness Safaris as a guide and ranger. He has published guides to Namibia, South Africa and Botswana and three books on African mammals and birds. He is the promoter and referent of numerous projects for the protection of African wildlife such as rhinos, lions, elephants and gorillas.

Intended Use: Utility / Hiking

Production type: Industrial
Country of Production: Italy
Blade: Full tang, tool steel D2
Blade Finish: Stonewashed
Handle: G-10
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 290mm.
Balance: slightly advanced
Weight: 412g.
Sheath: nylon, with thigh and belt attachments
Package: Cardboard box with Maserin logos - diamond sharpener - wire saw for wood
Note: Design by Davide Bomben, president of the Associazione Italiana Esperti d'Africa (Italian Association of African Experts) and chief instructor of the Poaching Prevention Academy, an organization that in Namibia and other African countries trains rangers against poachers. He is the director of training for the African Field Guides Association and for over ten years has worked with the tour operator Il Diamante and with Wilderness Safaris as a guide and ranger. He has published guides to Namibia, South Africa and Botswana and three books on African mammals and birds. He is the promoter and referent of numerous projects for the protection of African wildlife such as rhinos, lions, elephants and gorillas.

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in 440C 58HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Balancing: backward
Weight: 151
Sheath: nylon
Packaging: cardboard box with Maserin logos
Note:

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in 440C 58HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 195mm.
Balancing: backward
Weight: 151
Sheath: nylon
Packaging: cardboard box with Maserin logos
Note:

French regional knife handcrafted in the city of Sauveterre

Blade: Swedish 12C27 to 54HRC stainless steel.
Handle: horn
Blade length: 90 mm.
Blade thickness: 3 mm.
Total length: 200 mm.
Weight: 90 g.
Folders: Stainless Steel
Heads: Stainless steel
Closure: Stainless steel retention spring
Clip: Absent
Sheath: Absent

Fixed blade tactical knife designed by Alessandro Zanin.
Built without compromise modeled on the biomechanics of the hand, sculpted curves for maximum contact and absolute control, aggressive, powerful, agile and fast in hand changes.
Specialized for the most extreme uses.

Intended use: Tactical / Light Utility

Type of production: Industrial
Country of production: Italy
Blade: full tang in D2 58HRC steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 110mm.
Blade thickness: 6mm.
Total length: 250mm.
Balancing: set back
Weight: 353
Sheath: in Kydex,
Packaging: cardboard box with Maserin logos
Note:

Intended use: Hunting / Hiking / Agriculture

Type of production: Industrial
Country of production: Italy
Blade: D2 steel at 59HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 165mm.
Balancing: Backward
Weight: 94 g.
Sheath: leather, ambidextrous, belt with horizontal port
Packaging: Cardboard box
Notes: Designed by Corey Sar Fox, Texan knifemaker who has lived in Italy for over 20 years

Intended use: Hunting / Hiking / Agriculture

Type of production: Industrial
Country of production: Italy
Blade: D2 steel at 59HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 165mm.
Balancing: Backward
Weight: 94 g.
Sheath: leather, ambidextrous, belt with horizontal port
Packaging: Cardboard box
Notes: Designed by Corey Sar Fox, Texan knifemaker who has lived in Italy for over 20 years

Intended use: Tactical / Light Utility
Type of production: Industrial
Country of production: Maniago - Italy
Blade: full tang in stainless steel N690Co 58HRC
Blade treatment: Stonewashed
Handle: G10
Blade length: 107mm.
Blade thickness: 4mm.
Total length: 230mm.
Balancing: set back
Weight: 195
Sheath: in Kydex, by Radar
Packaging: cardboard box with Maserin logos
Notes: L.E.O. is the acronym of Law Enforcement Only - designed by Tommaso Rumici

Intended use: tactical / military

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Full Tang in stainless steel N690Co
Blade treatment: Stonewashed
Handle: G10
Blade Length: 70mm.
Blade thickness: 3mm.
Total length: 190mm.
Balancing: Rearranged
Weight: 80g.
Sheath: Kydex, neck or belt, with Tek-Lok multiposition attachment
Packing: Cardboard box with Maserin logos
Notes: designed by Russ Kommer

Intended use: tactical / military

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Full Tang in stainless steel N690Co
Blade treatment: Teflonatura
Handle: G10
Blade Length: 70mm.
Blade thickness: 3mm.
Total length: 190mm.
Balancing: Rearranged
Weight: 80g.
Sheath: Kydex, neck or belt, with Tek-Lok multiposition attachment
Packing: Cardboard box with Maserin logos
Notes: designed by Russ Kommer

Intended Use: Hunting / Hiking

Type of production: Industrial
Production Lama: Italy
Blade: 440C Stainless Steel 57 / 58HRC
Blade treatment: Satin
Handle: micarta green
Blade length: 214mm.
Blade thickness: 5mm.
Overall length: 345mm.
Balancing: Advanced
Weight: 420g.
Sheath: Leather
Packaging: Cardboard box with logos Maserin
Notes: Knives Group's official Facebook "Boars that Passion", created by Maserin in collaboration with the Group with the aim of getting the best knives for cinghialai, combining high quality materials with excellence in processing, aesthetics, ease of use and absolute security

Intended Use: Hunting / Hiking

Type of production: Industrial
Production Lama: Italy
Blade: 440C Stainless Steel 57 / 58HRC
Blade treatment: Satin
Handle: Orange G10
Blade length: 214mm.
Blade thickness: 5mm.
Overall length: 345mm.
Balancing: Advanced
Weight: 420g.
Sheath: Leather
Packaging: Cardboard box with logos Maserin
Notes: Knives Group's official Facebook "Boars that Passion", created by Maserin in collaboration with the Group with the aim of getting the best knives for cinghialai, combining high quality materials with excellence in processing, aesthetics, ease of use and absolute security

Intended Use: Hunting / Hiking

Type of production: Industrial
Production Lama: Italy
Blade: 440C Stainless Steel 57 / 58HRC
Blade treatment: Satin
Handle: Orange G10
Blade length: 214mm.
Blade thickness: 5mm.
Overall length: 345mm.
Balancing: Advanced
Weight: 420g.
Sheath: Leather
Packaging: Cardboard box with logos Maserin
Notes: Knives Group's official Facebook "Boars that Passion", created by Maserin in collaboration with the Group with the aim of getting the best knives for cinghialai, combining high quality materials with excellence in processing, aesthetics, ease of use and absolute security

Intended use: Survival / utlity

Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel  N690Co
Treatment Lama: Glazing
Handle: Green G10
Blade length: 110mm.
Blade thickness: 4mm.
Overall length: 235mm.
Balancing: Set back to 1.5cm. the branch of the guard
Weight: 195g.
Sheath: Nylon with leather loop
Packaging: Cardboard box with logos Maserin
Notes: developed in collaboration with dozens of chamois hunters experts Facebook Group "Rupicapra rupicapra"

Intended use: Survival / utlity

Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel  N690Co
Treatment Lama: Glazing
Handle: Green G10
Blade length: 110mm.
Blade thickness: 4mm.
Overall length: 235mm.
Balancing: Set back to 1.5cm. the branch of the guard
Weight: 195g.
Sheath: Nylon with leather loop
Packaging: Cardboard box with logos Maserin
Notes: developed in collaboration with dozens of chamois hunters experts Facebook Group "Rupicapra rupicapra"

The range of fixed blade knives Lion Steel has added a new model to 4:55 inches. The goal is to create a knife to all, easy to carry and effective use.

Type of production: Industrial
Production Lama: Italy
Blade: full tang, steel Sleipner 60 / 61HRC
Treatment Lama: Satin
Handle: Santos Wood
Blade length: 115mm.
Blade thickness: 4.5mm.
Overall length: 241mm.
Weight: 245g.
Sheath: Leather
Packaging: Cardboard box with logos Lion Steel
Notes: Design by Molletta

Intended Use: Sport / EDC

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 57 / 59HRC
Blade Treatment : Satin
Handle: G10 with 420C inner liners and anodized GR2 titanium spacer
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 182mm.
Thick when closed: -
Balancing: -
Weight: 90g.
Closing: Action Stopper patented system
Clip: Stainless steel satin
Packaging: cardboard box with Viper logos
Notes: Design by T. Rumici

Intended Use: Sport / EDC

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 57 / 59HRC
Blade Treatment: Satin
Handle: Carbon Fiber with 420C inner liners and anodized GR2 titanium spacer
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 182mm.
Thick when closed: -
Balancing: -
Weight: 90g.
Closing: Action Stopper patented system
Clip: Stainless steel satin
Packaging: cardboard box with Viper logos
Notes: Design by T. Rumici