military and tactical knives
-
Benchmade - Skirmish 630 Titanium - NOS FULL SET from a PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Sporting / Collection
Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) conditionBM-630-CP -
ExtremaRatio - Glauca B1 G.I.G.N. Knife - PRIVATE COLLECTION - knife
The GLAUCA B1 folding knife was born from the collaboration with the GIGN (special unit of the French National Gendarmerie). It has a tip designed to allow maximum penetration. On the back of the handle it features a stop strap cutting system.
It is equipped with a rear glass breaker, a clip that can be applied in three positions and a side safety device.
The rigid sheath is made of ABS applied to a Cordura base and allows you to store the knife with the blade open.
Allows multiple attachment options: MOLLE system for tactical vests, belt attachment and thigh attachment.
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Excellent condition
* Commercially available No
* Sharpness: Original
* Marks on blade: small scratches on the blade
* Marks on handle: NO
* Packaging: YES
* Sheath: YES
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratory
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Burnished
Handle: Rough Anticorodal
Blade length: 115mm.
Blade thickness: 4mm.
Closed length: 158mm
Total length: 268mm.
Closed thickness: 15mm.
Weight: 197g.
Closure: Liner Lock with Additional Safety
Clip: Removable and multi-position, in stainless steel
Sheath: Cordura and Kydex with magnetic blade retention
Packaging: Cardboard box with Extrema Ratio logos
Notes: supplied with the G.I.G.N. (National Gendarmerie Intervention Group) French, specialized in operations against terrorism and emergency response in the event of hostagesAP-ER-GLA-B1 -
Wander Tactical - Hurricane Knife Compound - Raw - Black Micarta - Artisanal Knife
Intended use: Tactical / Multirole
Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw
Handle: Micarta
Blade length: 110mm
Blade thickness: 5mm
Total length: 250mm
Balance: Rearward
Weight: 295g
Sheath: Thermoformed Kydex
Packaging: Certificate of warranty and authenticity
Note: Knife entirely handcraftedWT-HUR-RBM -
ExtremaRatio - MPC Desert Warfare - 2014 Full Set - PRIVATE COLLECTION - Knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 2014 knife overall in near new, unused condition, some minor marks on metal parts given by age
* Commercially available Discontinued.
* Sharpening: Factory sharpened, never used for cutting.
* Marks on blade: No
* Marks on handle: Some discoloration of laser engravings given by age.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Multirole
Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade Finish: Desert Warfare
Handle: Anticorodal with stainless steel spacer
Blade length: 115mm.
Blade thickness: 6.3mm.
Total length: 260mm.
Weight: 245g.
Lock system: Back Lock with additional safety pin
Packaging: cardboard box with Extrema Ratio logos
Notes: Previously purchased discontinued specimen from a private collection. Full set, in near-new conditionER-MPCDW-CP -
Fox - Tokala Fixed Knife - Bison Micarta - FX-105MB - Design by Reichart Markus - knife
Intended use: Utility / Tactical / Outdoor
Type of production: Industrial
Country of production: Italy
Blade: Niolox 59/61HRC stainless steel with Black Idroglider finish
Handle: Bison Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced by 1cm
Weight: 235g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -FX-105MB -
Boker Plus - Desertman - 12C27 Sandy Brown TPR - 02BO083 - fixed blade knife single edge
Intended Use: Outdoor / Bushcraft / Light Utility
Production type: Industrial
Country of Production: Taiwan
Blade: hidden tang made of Sandvik 12C27 stainless steel
Blade Finish: Titanium coating
Handle: Injection molded polymers (brown TPR and black GRP)
Blade length: 115mm.
Blade thickness: 4.2mm.
Total length: 242mm.
Weight: 210g.
Sheath: polymer and Nylon
Packaging: cardboard box with Boker Plus logos
Notes: -BO-02BO083 -
ExtremaRatio - S-Thil Stone Washed - knife
Extrema Ratio S-THIL STONE WASHED is a tactical backup knife with monolithic construction machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with Thilo designer Arnd Schiller.
The blade, a spear point type, is hardened to 58 HRC in order to achieve the best balance of edge retention and strength, features a false counterbore at the top that enhances penetration and point work characteristics, and has a full-length groove (fuller) that flows elegantly from the blade to the handle. The blade is milled integrally to the knife to enhance its compactness and lightness, maintaining a minimal thickness while still having a profile reminiscent of the classic Extrema Ratio handle.
That profile goes to form two small guards and a comfortable thumb rest to prevent the hand from slipping towards the blade. On the end are a skull crusher with a diamond-shaped tip and a slot that allows a wrist strap to be attached to the knife or the handle to be fitted with paracord coiling.
The molded nylon sheath is designed to be extremely flat with very small side dimensions to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the blade cutting edge to the right or left. The double retention system integral to the sheath consists of four pressure elements that work only two at a time, depending on right/left-handed use, while the nylon textile part has a button that allows the knife to be secured to the sheath.
The end of the sheath has a hole to expel liquids or debris inside. The ability to attach belt clip, ulticlip, malice clip makes it extremely versatile. You can also attach the sheath to the M.O.L.L.E. system by braiding the paracord.
Intended Use: Tactical/Multi-role
Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Stonewashed
Handle: Steel N690Co 58HRC
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: Nylon
Packaging: cardboard box with Extrema Ratio logos
Notes: -ER-STHIL-SW -
ExtremaRatio - S-Thil Black Warfare knife - XXV Anniversary Special Edition - knife
Extrema Ratio S-THIL Black Warfare, a special version of the S-THIL model, is a backup knife with a monolithic structure machined from a single piece of 5 mm thick BOHLER N690 steel, developed in collaboration with the designer Thilo Arnd Schiller. The spear point type blade is hardened to 58 HRC in order to obtain the best balance between edge retention and strength, has a false edge in the upper part which enhances the characteristics of penetration and tip work, and is equipped with a Full length furrow flowing elegantly from blade to grip.
The blade is milled integrally with the knife to enhance its compactness and lightness, maintaining a minimum thickness even with a profile that recalls the classic Extrema Ratio handle. This profile forms two small guards and a comfortable thumb rest in order to prevent the hand from slipping towards the blade. On the end there is a skull crusher with a diamond-shaped tip and a slot that allows you to attach a wrist strap to the knife or to equip the handle with paracord winding.
The special Black Warfare version uses the innovative and original Geotech Camo pattern, created by laser engraving. The molded nylon sheath has been designed to be extremely flat and with very small lateral dimensions, in order to make it as compact as possible. The design of the knife makes it ambidextrous, allowing it to be inserted into the sheath with the cutting edge of the blade to the right or left. The double retention system integral with the sheath is made up of four pressure elements that work only two at a time, depending on right/left use, while in the nylon textile part there is a button that allows you to secure the knife to the sheath . The end of the sheath has a hole that allows you to expel liquids or residues inside. The possibility of applying belt clips, ulticlips, malice clips makes it extremely versatile. It is also possible to hook the sheath to the M.O.L.L.E. system. weaving the paracord lanyard.
The S-thil Black Warfare is supplied in an IP67 certified watertight Polypropylene technical case, with pressurization valve, resistant to atmospheric agents, dust and shocks. Inside there are also the Nylon sheath, the double ULTICLIP and the double grain sharpening plate (ceramic abrasive and synthetic diamond).
Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade treatment: BURNISHING MIL-C-13924 GEOTECH CAMO
Handle: N690 steel
Blade length: 119mm.
Blade thickness: 5mm.
Total length: 230mm.
Weight: 123g.
Sheath: in Kydex, with double multiposition ULTICLIP attachment clip
Packaging: Polypropylene case with S-Thil / Extrema Ratio logos
Notes: exclusive briefcase to celebrate the company's 25th anniversaryER-STHIL-BWLE -
Boker Plus - Papillon Trainer Bali - 01BO352 - training knife
Intended Use: Training
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 420
Blade Finish: Stonewashed
Handle: Stainless steel
Blade Length: 114mm.
Blade thickness: 3.7mm.
Length closed: 138mm.
Total length: 252mm.
Weight: 124g.
Closure: T-latch
Clip: -
Package: Cardboard box with Boker Plus logos
Notes: -BO-01BO352 -
TB Outdoor - Maraudeur tactical knife in G10 Black - 11060035 - knife
This survival knife was designed by the French Tarrerias-Bonjean in collaboration with the military expert Philippe PEROTTI.
Manufactured in the workshops in Thiers, this survival knife features a MOX ® stainless steel blade. The black PVD coating offers very high wear and corrosion resistance.
Paracord 550 handle ensures a soft, comfortable, but safe grip in all conditions.
Glass shatter on the heel of the knife.Intended use: collection
Blade: MOX ® 58/59 hrc stainless steel
Handle: in G10
Blade length: 113mm.
Blade thickness: 4mm.
Total length: 246mm.
Weight: 214g.
Sheath: in kydex
Notes: Philippe Perotti design11060035 -
Benchmade - Fixed Adamas Flat Earth Cruwear by Shane Sibert - 375FE-1 - knife
A new era for Adamas®! The last thing your gear needs is another bulky knife weighing you down, which is why the 375FE-1 Adamas® has been redesigned to be stronger than ever while keeping weight and bulk down.
Entirely machined from super-strong CPM-CruWear® steel with cobalt coating that offers enhanced corrosion resistance. In addition to the knife, the sheath has been redesigned to be secured with a low profile MALICE CLIPS®, allowing users to carry the knife on MOLLE® webbing or a standard belt.
Intended Use: Tactical
Manufacturing Type: Industrial
Country of Production: USA
Blade: Tool steel CPM-CRUWEAR 63/65HRC
Blade Treatment: Cobalt Flat Earth
Handle: -
Blade Length: 106mm.
Blade thickness: 4.3mm.
Total lenght: 232mm.
Weight: 160g.
Scabbard: made of injection molded polymer, with fixing clip type Malice
Packaging: cardboard box with Benchmade logos
Notes: new version 2021 - in the package is included paracord for the handleBM-375FE-1 -
Benchmade - Fixed Adamas Cruwear by Shane Sibert - 375BK-1 - knife
A new era for Adamas®! The last thing your gear needs is another bulky knife weighing you down, which is why the 375BK-1 Adamas® has been redesigned to be stronger than ever while keeping weight and bulk down.
Entirely machined from super-strong CPM-CruWear® steel with cobalt coating that offers added corrosion resistance. In addition to the knife, the sheath has been redesigned to be secured with a low profile MALICE CLIPS®, allowing users to carry the knife on MOLLE® webbing or a standard belt.
Intended Use: Tactical
Manufacturing Type: Industrial
Country of Production: USA
Blade: Tool Steel CPM-CRUWEAR 63/65HRC
Blade Treatment: Cobalt Black Steel
Handle: -
Blade Length: 106mm.
Blade thickness: 4.3mm.
Total lenght: 232mm.
Weight: 160g.
Scabbard: made of injection molded polymer, with fixing clip type Malice
Package: cardboard box with Benchmade logos
Notes: new version 2021BM-375BK-1 -
Benchmade - Model 85 Billet Titanium knife - knife
*** ATTENTION: PAYMENT FOR THIS ITEM CANNOT BE MADE WITH PAYPAL ***
Intended use: sports / collection
Type of production: Industrial
Production Lama: USA
Blade: CPM-S30V 58 / 60HRC stainless steel
Blade treatment: satin
Handle: Billet Titanium machined from solid and numerically controlled
Blade length: 112mm.
Blade thickness: 3.1mm.
Closed length: 139mm.
Total length: 254mm.
Weight: 149g.
Closure: Magnetic T-latch
Clip: -
Sheath: Black nylon
Packaging: Cardboard box with Benchmade logos
Note: -BM-85 -
Maserin - Badger knife - Design by A. Zanin - 940 / G10N - knife
Fixed blade tactical knife designed by Alessandro Zanin.
Built without compromise modeled on the biomechanics of the hand, sculpted curves for maximum contact and absolute control, aggressive, powerful, agile and fast in hand changes.
Specialized for the most extreme uses.
Intended use: Tactical / Light UtilityType of production: Industrial
Country of production: Italy
Blade: full tang in D2 58HRC steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 110mm.
Blade thickness: 6mm.
Total length: 250mm.
Balancing: set back
Weight: 353
Sheath: in Kydex,
Packaging: cardboard box with Maserin logos
Note:MA-940/G10N -
Viper - David Evoluzione by T. Rumici - Green Micarta - VT4002ECG - knife
Use: Light Utility
Type of production: Industrial
Production Country: Italy
Blade: Carbon steel D2 59 / 60HRC
Blade Treatment: Blackwash
Handle: Canvas Micarta
Blade length: 105mm.
Blade thickness: 5.8mm.
Overall length: 227mm.
Balancing: backward 2cm
Weight: 260g.
Sheath: Nylon, compatible M.O.L.L.E. by Vega
Packaging: cardboard box with Viper and logos Tecnocut
Notes: Design by Tommaso RumiciVT4002ECG -
Viper - David Evoluzione by T. Rumici - Black Micarta - VT4002ECB - knife
Use: Light Utility
Type of production: Industrial
Production Country: Italy
Blade: Carbon steel D2 59 / 60HRC
Blade Treatment: Blackwash
Handle: Canvas Micarta
Blade length: 105mm.
Blade thickness: 5.8mm.
Overall length: 227mm.
Balancing: backward 2cm
Weight: 260g.
Sheath: Nylon, compatible M.O.L.L.E. by Vega
Packaging: cardboard box with Viper and logos Tecnocut
Notes: Design by Tommaso RumiciVT4002ECB -
ExtremaRatio - RAO II - knife
Intended use: military / tactical
Type of production: industrial
Production Blade: Italy
Blade: Stainless steel 58HRC N690Co
Treatment Blade: Testudo MIL-C-13924
Handle: 4.5mm anti-corrosion
Blade length: 115mm.
Blade Thickness: 6.3mm.
Length closed: 142
Overall length: 262mm.
Balancing: -
Weight: 330g.
Closure: front lock changed - safety pin threaded
Clip: -
Sheath: tactical nylon with attacks M.O.L.L.E. suitable for both the knife closed and open
Notes: diamond sharpener includedER-RAO-II -
ExtremaRatio - Pugio Testudo Filo Singolo - knife
Il nome è quello della corta ed appuntita daga romana, ma la forma dell,impugnatura a osso di seppia rastremato sui lati ricorda quella dei lunghi pugnali caucasici.
Daghetta da stivale, un back up da difesa, ottima scelta per il porto dissimulato. La lama arrotata a rasoio e l'assenza di guardie elimina la possibilità di impigliamenti nelle tecniche di CQC. Accompagnato da fodero rigido ad innesto automatico con belt-lock.Destinazione d'uso: Tattico / CQC
Tipo di produzione: Industriale
Paese di produzione: Italia
Lama: in acciaio inox N690Co 58HRC
Trattamento lama: Brunitura Mil-C-13924
Impugnatura: Forprene
Lunghezza lama: 110mm.
Spessore lama: 6.5mm.
Lunghezza totale: 225mm.
Peso: 190g.
Fodero: in ABS, rigido, con aggancio tipo Tek-Lok
Confezione: Scatola di cartone con loghi Extrema Ratio
Note: Versione a filo singolo (e pertanto di libera vendita e detenzione) della daga PugioER-PUGIO -
ExtremaRatio - Fulcrum Compact knife Desert Warfare - knife
After the Shrapnel, Extrema Ratio gives us a second knife that, despite having a total length of only 21 centimeters, maintains all the technical / tactical characteristics of the previous models.
The Fulcrum C (compact) therefore completes the Fulcrum series with a fixed blade. Sturdy and compact knife, suitable for emergency or concealed use.
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Finish: camouflage coating
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Total length: 210mm.
Balancing: set back
Weight: 200g.
Sheath: rigid in ABS with Tek-Lok coupling with automatic knife retention system.
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificatesER-FUC-DW -
ExtremaRatio - Fulcrum Compact Testudo - knife
Extrema Ratio Fulcrum Compact Testudo
After Shrapnel, Extrema Ratio gives us a second knife which, while having a total length of just 21 centimeters, it maintains all the technical / tactical previous models.
The Fulcrum C (compact) then goes to complete the series of Fulcrum fixed blade knife and turns out to be a robust and compact, suitable for use in emergency or concealed.
Occupation: knife backup
N690 steel blade with 58HRC coated testudo
Blade thickness: 6.3 mm.
Blade length: 110 mm.
Total length: 210 mm.
Handle in Forprene
ABS hard case with Tek-Lok coupling with automatic retention of the knife.ER-FUC-BK -
ExtremaRatio - MF2 Desert Warfare - Lockable knife
Target: Tactical / Fighter
Type of production: Industrial
Blade production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Geocamous
Manicure: Anticorodal
Blade Length: 115mm.
Blade thickness: 4mm.
Closed length: 155mm.
Total length: 263mm.
Closed thickness: 24mm.
Balance: -
Weight: 195g.
Closure: Liner Lock
Clip: Stainless Steel
Sheath: -
Packing: black carton box with Extrema Ratio logos
Notes: -4352DW -
ExtremaRatio - MF2 Ordinanza Col Moschin - Lockable Knife
Target: Tactical / Fighter
Type of production: Industrial
Blade production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Testudo
Manicure: Anticorodal
Blade Length: 115mm.
Blade thickness: 4mm.
Closed length: 155mm.
Total length: 263mm.
Closed thickness: 24mm.
Balance: -
Weight: 195g.
Closure: Liner Lock
Clip: Stainless Steel
Sheath: -
Package: Polycarbonate briefcase with Extrema Ratio and Col Moschin logos
Notes: -4352CM -
ExtremaRatio - MF2 Rough knife - folding knife
Intended use: Tactical / Fighter
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 58HRC
Blade treatment: Testudo
Handle: Rough Anticorodal
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: 155mm.
Total length: 263mm.
Thick when closed: 24mm.
Balancing: -
Weight: 195g.
Closure: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: black cardboard box with Extrema Ratio logos
Note: -4352R -
ExtremaRatio - Shrapnel OG Desert Warfare - knife
Extrema Ratio Shrapnel Desert Warfare
Il primo coltello Extrema Ratio che, pur avendo una lunghezza totale di soli 21 centimetri, mantiene inalterate tutte le caratteristiche tecnico/tattiche dei precedenti modelli.Destinazione d'uso: Tattico/Sportivo
Tipo di produzione: Industriale
Paese di produzione: Italia
Lama: in acciaio inox N690Co
Finitura: brunitura Testudo
Impugnatura: Forprene
Lunghezza lama: 110mm.
Spessore lama: 6.3mm.
Lunghezza totale: 210mm.
Bilanciatura: arretrata
Peso: 200g.
Fodero: in ABS con aggancio Tek-Lok con sistema automatico di ritenzione del coltello.
Confezione: Scatola di cartone con loghi Extrema Ratio e certificati del produttoreER-SHR-DW -
ExtremaRatio - Shrapnel OG Testudo - knife
Extrema Ratio Shrapnel
Il primo coltello Extrema Ratio che, pur avendo una lunghezza totale di soli 21 centimetri, mantiene inalterate tutte le caratteristiche tecnico/tattiche dei precedenti modelli.
Impiego: coltello di backup
Lama in acciaio N690 a 58HRC con rivestimento testudo
Spessore lama: 6,3 mm.
Lunghezza lama: 110 mm.
Lunghezza totale: 210 mm.
Manicatura in Forprene
Fodero in ABS con aggancio Tek-Lok con sistema automatico di ritenzione del coltello.ER-SHR-BK -
ExtremaRatio - Col Moschin Compact - Testudo - knife
Intended Use: Tactical
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: Testudo
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Length closed: -
Total length: 212mm.
Thick when closed: -
Balance: -
Weight: 209g.
Closing: -
Clip: -
Sheath: ABS
Packaging: Cardboard box with logos Extrema Ratio
Notes:ER-CMC-BK -
ExtremaRatio - Glauca G1 knife - GSG9 - knife
Glauca G1, an evolution of the Glauca model, has specific features designed especially for the renowned GSG9 department, a special unit of the Bundespolizei, which has officially adopted it. The handle, made of anodized anticorodal aluminum with tactical mud coloring, is equipped with a tungsten carbide rear glass breaker.
On the back are a stainless steel nail stripper that can be locked in the open position and a resealable rescue tool that allows the operator to make a quick emergency cut to free a possible casualty from their clothing. This second tool is also great for use as a belt cutter.
The blade locking system is the proven LINER-LOCK to which is added a second safety mechanism to be operated manually.
Production type: IndustrialCountry of manufacture: Italy
Blade: N690Co stainless steel
Blade Treatment: Burnishing MIL-C-13924
Handle: Anticorodal
Blade Length: 112mm.
Blade thickness: 4mm.
Length closed: 158mm.
Total length: 270mm.
Thickness when closed: 17mm.
Weight: 225g.
Closure: Liner Lock with additional side safety
Clip: Removable, burnished stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: Rear window breaker - Stainless steel nail striker - Reclosable cutting rescue toolER-GLA-G1 -
Gerber - Applegate Fairbairn Knife - PRIVATE COLLECTION - 5780 - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Conditions: in excellent conditions
Available in the market: NO
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: NO, without original box
Checked and Certified by our internal laboratory
Intended use: Tactical/MilitaryBlade: in 154CM stainless steel
Blade Production: USA
Handle: Zytel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balancing: -
Weight: 113g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: without boxAP-GE-APP -
Microtech - Currahee - S/E Green 102-1GR - PRE-OWNED - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: January 2014 production, previously purchased.
* Condition: Brand new
* Commercially available: Discontinued and no longer available.
* Sharpening: Factory.
* Marks on blade: No
* Marks on handle: Small abrasions given by contact with scabbard.
* Box: Present and original
* Scabbard: Present and original
* Manuals, Certificates and Warranties: Warranty and maintenance sheet.
* Checked and Certified by our in-house laboratory
Intended Use: Heavy Utility
Production type: Midtech
Country of Production: USA
Blade: full tang in D2 steel at 59/60HRC
Blade treatment: Gunkote Green
Handle: polymer
Blade length: 115mm.
Blade thickness: 5.2mm.
Total length: 250mm.
Balance: advanced
Weight: 370g.
Sheath: polymer, with M.O.L.L.E. compatible multi-position attachments.
Packaging: cardboard box with Microtech logos, Maintenance and warranty information
Notes: produced in January 2014 - previously purchased - brand newMCT1021GR -
Wander Tactical - Hurricane Compound - Raw & Micarta Black - custom made knife
Intended Use: Tactical / Multirole
Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Raw
Handle: Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 250mm.
Balance: backward
Weight: 295g.
Sheath: made of thermoformed Kydex
Packaging: certificate of guarantee and authenticity
Notes: knife made entirely by handWT-HUR-CRB -
ExtremaRatio - Shrapnel knife - Testudo - 1st series 2004 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - year of production 2004 - 1st series Shrapnel with double guard branch and kydex sheath
* Conditions: Like new
* Commercially available Yes
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: NO
* Sheath: In kydex
* Manuals, Certificates and Guarantees: YES
* Checked and Certified by our internal laboratoryIntended Use: Military/Tactical
Type of production: industrial
Blade production: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: MIL-C 13924 bluing
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Closed length: 142mm.
Total length: 210mm.
Weight: 210g.
Clips: absent
Sheath: ABS sheath with Tek-Lok attachment with automatic knife retention system.
Note: -ER-SHR-BK-1 -
ExtremaRatio - RAO II Expeditions - knife
Intended use: hiking / Survivalism
Type of production: industrial
Country of manufacture: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Dark Stone
Handle: anticorodal of 4.5mm
Blade length: 115mm.
Blade thickness: 6.3mm.
Length closed: 142
Total length: 262mm.
Weight: 330g.
Closure: modified front lock - threaded safety pin
Sheath: tactical Nylon with M.O.L.L.E. attachments suitable for both closed and open knife
Notes: diamond sharpener and fire starter includedER-RAO-II-EX -
Davide Ceroni - Trinidad Scorpion Custom Bali - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Original packaging present
* Scabbard: Original scabbard present.
* Manuals, Certificates and Warranties: Certificate of Warranty and Authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: sports/collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL-34 60HRC
Blade finish: dual tone (satin finish and microblading)
Handle: channel handles and titanium TI6AL4V inserts, ball bearing movement
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: 147mm.
Total length: 256mm.
Weight: 120g.
Closure: -
Clip: -
Sheath: Black leather pouch
Packaging: Leather pouch with zipper and certificate of authenticity and warranty made of steel, laser engraved
Notes: Designed and made entirely by hand in Italy by Davide Ceroni - Previously purchased 09/12/2021 specimen from private collectionAP-CKTRSC -
Viper - Rhino 1 - Elmax steel - Pau Santo wood by Fabrizio Silvestrelli - V5901CB - knife
Intended use: Sporting
Production type: Industrial
Blade Production: Italy
Blade: Uddeholm ELMAX SuperClean steel, HRC 59/61
Blade Treatment: Satin
Handle: Pau Santo wood
Blade length: 108mm.
Blade thickness: 4.2mm.
Length closed: 143mm.
Total length: 253mm.
Thickness when closed: 19mm.
Balance: - Weight: 280g.
Closure: Back Lock with two wire springs
Clip:Tempered AISI420 steel with stonewashed treatment
Sheath: -
Packaging: Cardboard box with Viper logos
Notes: Design by Fabrizio "Sylvester" SilvestrelliV5901CB -
Andre De Villiers ADV - Kudu Hunter Fixed - M390 & Black G10 - knife
The Kudu Hunter fixed-blade knife offers an excellent balance between form and function: the wide drop point blade is reminiscent of its predecessor model Harpoon, but without the dedicated thumb rest. The handle is extremely comfortable for different types of grips, and its shape does not cause fatigue during long periods of use. The Kydex scabbard has a Kydex belt loop that allows you to switch between normal belt carry and scout carry, right or left handed, with ease. This is truly an excellent "all-around" design by Andre.
Intended use: collection/sporting
Type of manufacture: midtech
Country of manufacture: South Africa
Blade: full tang, stainless steel M390
Blade treatment: Satin finish
Handle: Black G10
Blade length: 115mm.
Blade thickness: 4.8mm.
Total length: 228mm.
Balance: backward
Weight: 205g.
Sheath: carbon fiber-effect kydex with multi-position belt attachment
Packaging: -
Notes: designed and made entirely by Andre De VilliersADV-KH -
Viper - Rhino 1 - Elmax steel - DCV Green Micarta by Fabrizio Silvestrelli - V5905CV - knife
Intended use: Sport
Type of production: Industrial
Blade production: Italy
Blade: Uddeholm ELMAX SuperClean steel, HRC 59/61
Blade treatment: Dark stone washed
Handle: Canvas micarta green
Blade length: 108mm.
Blade thickness: 4.2mm.
Closed length: 143mm.
Total length: 253mm.
Closed thickness: 19mm.
Balancing: - Weight: 250g.
Closure: Back Lock with two wire springs
Clip: Tempered AISI420 steel with stonewashed treatment
Scabbard: -
Packaging: Cardboard box with Viper logos
Notes: Design by Fabrizio "Sylvester" SilvestrelliV5905CV -
CKF - Kadat Limited Edition by Alex Vorobyov - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available: Discontinued, made in 2018 in only 300 pieces, individually numbered
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Original Nylon case with accessories.
* Scabbard: Not provided
* Manuals, Certificates and Warranties: Certificate with serial number and signature.
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Collection
Type of production: Midtech (semi-craft)
Country of manufacture: Russia
Blade: stainless steel M390
Blade treatment: Bkacwashed
Handle: bronze anodized titanium with carbon fiber inserts
Blade length: 111mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 250mm.
Thickness when closed: 13mm.
Weight: 167g.
Closure: Frame Lock
Clip: titanium machined from solid, with Timascus insert
Notes: knife from private collection, previously purchased, made in only 300 individually numbered examplesCKF-KAD-CP -
ExtremaRatio - Fulcrum Knife Compact Geocamo - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Discontinued coloration - First series, with flat sheath - Overall in very good condition, with small marks on the blade due to insertion and removal of the knife from the sheath - Original factory sharpening in excellent condition, never used - Accompanied by original box and paper certificates and warranties - checked and certified by our in-house laboratory.
Intended Use: Tactical/SportingProduction type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co
Finish: camouflage coating
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Total length: 210mm.
Balance: backward
Weight: 200g.
Sheath: rigid ABS with Tek-Lok attachment with automatic knife retention system.
Packaging: knife withdrawn from private collection globally in excellent conditionER-FUC-GEO-CP -
Fox - Pro Hunter Fixed Knife - Black Micarta - FX-131MBSW - knife
Intended use: Utility / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690Co 58 / 60HRC stainless steel with stonewash finish
Handle: Black Canvas Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: advanced to 1cm
Weight: 190g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -FX-131MBSW -
TB Outdoor - Maraudeur tactical knife in G10 Green - 11060037 - knife
This survival knife was designed by the French Tarrerias-Bonjean in collaboration with the military expert Philippe PEROTTI.
Manufactured in the workshops in Thiers, this survival knife features a MOX ® stainless steel blade. The black PVD coating offers very high wear and corrosion resistance.
Paracord 550 handle ensures a soft, comfortable, but safe grip in all conditions.
Glass shatter on the heel of the knife.Intended use: collection
Blade: MOX ® 58/59 hrc stainless steel
Handle: in G10
Blade length: 113mm.
Blade thickness: 4mm.
Total length: 246mm.
Weight: 214g.
Sheath: in kydex
Notes: Philippe Perotti design11060037 -
TB Outdoor - Maraudeur tactical knife in desert - 11060004 - knife
This survival knife was designed by the French Tarrerias-Bonjean in collaboration with the military expert Philippe PEROTTI.
Manufactured in the workshops in Thiers, this survival knife features a MOX ® stainless steel blade. The black PVD coating offers very high wear and corrosion resistance.
Paracord 550 handle ensures a soft, comfortable, but safe grip in all conditions.
Glass shatter on the heel of the knife.Intended use: collection
Blade: MOX ® 58/59 hrc stainless steel
Handle: in paracord
Blade length: 113mm.
Blade thickness: 4mm.
Total length: 246mm.
Weight: 200g.
Sheath: in kydex
Notes: Philippe Perotti design11060004 -
ExtremaRatio - Col Moschin Compact Satin knife in San Mai V-TOKU2 - Limited Edition - knife
Japanese steel blends with Italian excellence
For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.
Col Moschin Compact model: for this First Production Run a run of 10 pieces numbered from 1 to 10 was created.
The lethality of the COL MOSCHIN knife in compact version. Supplied with rigid belt sheath and BELT-CLIP. The rigid sleeve can be positioned horizontally, vertically or in a 45 ° inclined position
Use: tactical, sports, hiking, collection
Blade: integral, in laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Handle: forprene
Blade length: 110mm.
Blade thickness: 6.5mm.
Total length: 212mm.
Balance: set back to 0.5cm. from the guard branch
Weight: 209g.
Sheath: ABS with multi-position Tek-Lok attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a thin surface of oil.
As in the ancient Japanese Samurai swords.Rolled steel - imported into Italy by Collini Steel directly from Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
ER-COLC-VT -
White River Knife & Tool - Ursus Bushcraft BC45 - WRUR45 - knife - knife
Collini Cutlery is the official distributor for Italy of the White River Knife & Tool knives
Designed for intensive use in real survival situations, this knife is also excellent for outdoor use and hunting.
Intended use: Hunting / SportsType of production: Artisan
Blade production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: -
Total length: 240mm.
Thick when closed: -
Balancing: 2 cm backward
Weight: 238g.
Closing: -
Clip: -
Sheath: leather
Packaging: Wooden box with WRKT logos
Notes: flintlock housed in a scabbard pocketWRUR45 -
Benchmade - SOCP Tactical Folder - Axis Plain - 391BK - Knife
Intended use: Tactical
Type of production: Industrial
Country of production: USA
Blade: in steel D2
Blade treatment: Black Coating
Handle: CF-Elite (ultralight polymer, reinforced with carbon fiber)
Blade length: 113mm.
Blade thickness: 3mm.
Length closed: 143mm.
Total length: 257mm.
Weight: 116g.
Closing: AxisLock
Clip: multiposition, removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Note: -BM-391BK -
Medford Knife and Tools - TFF-1 Tactical Black Blood - PRIVATE COLLECTION - knife
Collector's knife from a private collection - Model TTFF1 by Medford with custom Black Blood treatment and black coating of the sleeve by Dino Picco by Wander Tactical - Excellent condition with original box - Regrinded - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Tactical / Collection
Type of production: Custom
Blade production: Usa
Blade: D2 steel
Blade treatment: -
Handle: aluminum and titanium
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 245mm.
Thick when closed: 13mm.
Balancing: on the guard branch
Weight: 252g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg Medford - Black Blood blade treatment and handle repainted by Wander Tactical designer Dino PiccoTTFF1-CP -
Medford Knife and Tools - USMC The Fighter Flipper - Bronze Anodized Titanium - knife
Intended use: Tactical / Heavy Duty
Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Black PVD
Handle: Titanium with bronze anodizing and black PVD shank
Blade length: 106mm.
Blade thickness: 5mm.
Length closed: 132mm.
Total length: 238mm.
Thick when closed: 15mm.
Weight: 172g.
Opening: through the Karst pinball system
Closing: Framelock in titanium
Clip: titanium, removable, flamed
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg MedfordM204-36A1 -
ExtremaRatio - Shrapnel OG Satin - San Mai V-TOKU2 Limited Edition - knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
SHRAPNEL OG model: for this First Production Run, a circulation of 10 pieces numbered from 1 to 10 was produced.
SHRAPNEL OG is a truly multi-purpose "back-up", with strong combat attitudes. The leaf blade is characterized by a wide flat winding, with a narrow sharpening angle which makes it particularly sharp. The rigid sheath can be positioned horizontally, vertically or inclined at 45 °. The SHRAPNEL OG is produced without the top guard.
Use: tactical, sports, hiking, collection
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Handle: forprene
Blade length: 90mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: set back to 0.5cm. from the guard branch
Weight: 190g.
Sheath: ABS with Tek-Lok multiposition attachment
Notes: Numbered edition - cardboard box with Extremaratio logos and certificateAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (V-Toku2, VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, reaches hardness and cutting performance significantly higher than that achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.ERCC-P-S-VT2 -
Pohl Force - Alpha Four Knife - Outdoor Version - 1059 - knife
Intended use: Sports / Tactical
Type of production: Industrial
Blade: CTS-BD1 stainless steel
Blade treatment: micro-shot blasting
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Total length: 260mm.
Thick when closed: 18mm
Balancing: set back by 1cm from the guard branch
Weight: 270g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: cardboard box with Pohl Force logos - numbered guarantee certificate - sticker with Pohl Force logos - PVC patch with velcro
Notes: Peg for opening with a single hand, which can be disassembled / assembled according to your preferencesPF-1059 -
479/5000 White River Knife & Tool - Ursus Bushcraft BC45 knife - knife
Intended use: Hunting / Sports
Type of production: Craft
Lama production: USA
Blade: CPM-S35VN 58 / 60HRC stainless steel
Blade treatment: -
Handle: micarta
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: -
Total length: 240mm.
Thickness when closed: -
Balancing: 2 cm back
Weight: 238g.
Closure: -
Clip: -
Sheath: in leather
Packaging: cardboard box with WRKT logos
Note:WT-BC45 -
ExtremaRatio - Glauca J1 Jagdkommando - knife
Folding knife developed together with the experts of the Department Jagdkommando materials, the special strength of the Austrian army. It has a tip designed to allow maximum penetration. It is equipped with a rear evacuation hammer, clip applicable in three positions and lateral secure. The handle is made with a particular finish for a better grip during use. The sheath desert kydex with hooking for M.O.L.L.E. system, allows storing the knife blade to open.
Type of production: Industrial
Production Country: Italy
Blade: stainless steel N690Co
Blade treatment: burnishing MIL-C 13924
Handle: rough anticorodal
Blade length: 110mm.
Blade thickness: 4mm.
Closed Length: 158mm
Overall length: 268mm.
Thickness when closed: 15mm.
Weight: 198g.
Lock: Liner Lock with secure additional
Clip: Removable, stainless steel
Sheath: Kydex, compatible with MOLLE attacks
Packaging: Cardboard box with Extrema Ratio logos
Notes: Rear glass breakerER-GLAJ1 -
Wander Tactical - Hurricane Military Tool - GunKote Black & Micarta Black - custom knife
Intended use: Tactical / Collection
Type of production: Custom
Production Lama: Italy
Blade: full tang, D2 steel, cryogenic treatment, to 59 / 61HRC
Blade treatment: GunKote
Handle: Micarta
Blade length: 110 mm.
Blade thickness: 6.5mm.
Overall length: 250 mm.
Balance: on guard branch
Weight: 345g.
Sheath: Artisan, Kydex thermoformed with Tek-Lok attack
Packaging: -
Notes: being a prototype, the final product might be changed from that photographedWT-HUR-RCB -
Pohl Force - Alpha Four - Desert Tactical Limited Edition - 1061 - knife
Intended use: Tactical collection
Type of production: Industrial
Blade: D2 steel
Blade treatment: Satin finish
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: 1cm back from the guard branch
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Pohl Force logos - numbered certificate of guarantee - Cordura sheath - sticker with Pohl Force logos
Notes: Limited edition of just 600 numbered copies - Package Inside there is a small peg to mount on the back of the blade to make the opening knife with one handPF-1060 -
Pohl Force - Alpha Four - Desert Tactical Limited Edition - 1061 - knife
Intended use: Tactical collection
Type of production: Industrial
Blade: D2 steel
Blade treatment: Satin finish
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: 1cm back from the guard branch
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Pohl Force logos - numbered certificate of guarantee - Cordura sheath - sticker with Pohl Force logos
Notes: Limited edition of just 600 numbered copies - Package Inside there is a small peg to mount on the back of the blade to make the opening knife with one handPF-1061 -
Benchmade - Model 87 Titanium - knife
*** ATTENTION: THE PAYMENT OF THIS ARTICLE SHALL NOT BE MADE WITH PAYPAL ***
Intended Use: sport / collection
Type of production: Industrial
Production Lama USA
Blade: CPM-S30V Stainless Steel 58 / 60HRC
Blade treatment: satin
Handle: titanium billet and worked CNC
Blade length: 114mm.
Blade thickness: 3.1mm.
Closed Length: 139mm.
Overall length: 254mm.
Weight: 153g.
Closed: T-magnetic latch
Clip: -
Sheath: Black Nylon
Packaging: Cardboard box with Benchmade logos
Notes: -BM-87 -
ExtremaRatio - Shrapnel OG Satin in San Mai CoS - knife
For this new exclusive collaboration with Extrema Ratio we decided to propose a best seller in the world of cutlery, the Shrapnel model. It's a satin blade version but the most important thing is that has been used, for the first time in Italy, the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used the CoS (Cobalt Special, considered mechanically superior by 25% compared to the already appreciated VG10) for the central plate and the 420J2 (55 HRC) for the two side plates, in order to have a high cutting capacity, but at the the same time a remarkable resilience and resistance to oxidation.
A First Production Run of 30 pieces has been made.
SHRAPNEL OG is a truly versatile “back up” knife with marked combat qualities. Its leaf-shaped blade is flat ground at a characteristically low angle to a wide, extraordinarily sharp edge. The included hard sheath can be worn vertically, horizontally or obliquely (at a 45° angle). Tthe SHRAPNEL OG hilt design does not include a guard.
Use: tactical , sports , hiking , collection
Blade: Full , Japanese- rolled stainless steel ( San Mai) with sharp CoS to 61,7HRC in cryogenic tempering
Handle: Forprene
Blade length: 90mm.
Blade Thickness: 6.5 mm.
Overall length: 210mm.
Balancing: back to 0.5cm . by guard branch
Weight: 214g.
Sheath: ABS with Tek - Lok multi attack
Notes: cardboard box with Extremaratio logos and certificate
Clad Metal
It is a composite metal partly or entirely diffusion bonded together of different kinds of metals.
Metal composition shows higher performance which respective materials alone do not possess and the performance complements opposite characteristics of each material, that is "compound characteristics"Clad Effect on Cutleries
Toughness
Like Japanese swords, clad metal is hard to break or bend, thanks to the toughness as the hard steel part is clad with soft steels.
Easy to work on
Cladded structure is easy to apply on such works as forging, grinding, sharpening or polishing to make a sharp blade.
Improved corrosion resistance
Proper material combination generates electrical potential difference and it enhances the corrosion resistance on blade edge.
Better and long lasting sharpness
Steel after forging pressure makes the microscopic structure denser and improves the sharpness and ensures long lasting performance.
Resource saving
As high class steel is used only for necessary part, it is perfectly cost effective..
Easy distortion correction
As the steel is bonded with soft steel materials, its blade is hard to break and the distortion correction is easy.
Easy drilling and welding after heat treatment
Though the steel gets harder after heat treatment, the soft steel never loses its softness, enabling the material to be drilled or welded.
Design improvement
Laminated patterns or Damascus patterns appear from basis materials which are bonded with different kinds of metals.ERCC-SH -
Pohl Force - MK-1 Titanium - Limited Edition - 1065 - Knife
Intended use: Tactical / Military / Collection
Type of production: Industrial
Country of production: Italy (by Lion Steel - Maniago)
Blade: stainless Niolox
Blade treatment: Blackwash
Handle: Anodized Titanium 6Al4V
Blade length: 113mm.
Blade thickness: 5mm.
Closed Length: 147mm.
Overall length: 240mm.
Thick when closed: 14mm.
Weight: 240g.
Lock: Frame Lock with stainless steel swing and integrated security system Rotoblock
Clip: Removable, burnished stainless steel
Packaging: Cardboard box with a nylon bag zip, patch velco Pohl Force and warranty certificates numbered
Notes: Edition limited and numbered edition for only 200 numbered copies of the blade, box and certificate12601 -
Benchmade - Nimravus 140BK Knife - Knife
Intended use: Tactical
Type of production: Industrial
blade production: U.S.A.
Blade: 154CM Stainless Steel 58 / 61HRC
Blade treatment: TiNi
Handle: Aluminum
Blade length: 115mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 240mm.
Thick when closed: -
Balancing: -
Weight: 142g.
Closed: -
Clip: -
Sheath: Nylon, MOLLE compatible
Packaging: Cardboard box with Benchmade logos
notes:BM-140BK -
ExtremaRatio - Fulcrum C FH - Full Handle - Black - knife
Intended use: Tactical
Type of production: Industrial
Production Country: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: burnishing MIL-C-13924
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Overall length: 240mm.
Weight: 241g.
Sheath: ABS, with Tek-Lok type of coupling system
Packaging: cardboard box with Extrema Ratio logos
Notes: long-handled version of the model Shrapnel OGER-FUC-FHB -
ExtremaRatio - Shrapnel OG Full Handle - Black - knife
Intended use: Tactical
Type of production: Industrial
Production Country: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: burnishing MIL-C-13924
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Overall length: 240mm.
Weight: 241g.
Sheath: ABS, with Tek-Lok type of coupling system
Packaging: cardboard box with Extrema Ratio logos
Notes: long-handled version of the model Shrapnel OG12553 -
Wander Tactical - Hurricane knife Iron Washed and Black Micarta - custom knife
Type of production: Artisan
Lama production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 110mm.
Blade thickness: 6.5mm.
Total length: 250mm.
Balancing: set back
Weight: 345g.
Sheath: in black leather
Packaging: -
Notes: Each knife is unique and handcrafted; certificate of authenticity custom processing12500 -
Wander Tactical - Hurricane Military Tool - Raw Finish and Green Micarta - custom knife
Type of production: Artisan
Lama production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 110mm.
Blade thickness: 6.5mm.
Total length: 250mm.
Balancing: set back
Weight: 345g.
Sheath: in Kydex, thermoformed, with Tek-Lok type connection
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.
Send feedback
History
Saved
Community12499 -
Wander Tactical - Hurricane Military Tool - Black Blood & Desert Micarta - custom knife
2016 version: Now with a 6.5mm of blade thickness
Intended use: Tactical / Collection
Type of production: Custom
Production Lama: Italy
Blade: full tang, D2 steel, cryogenic treatment, to 59 / 61HRC
Blade treatment: Black Blood
Handle: Micarta
Blade length: 110 mm.
Blade thickness: 6.5mm.
Overall length: 250 mm.
Balance: on guard branch
Weight: 345g.
Sheath: Artisan, Kydex thermoformed with Tek-Lok attack
Packaging: -
Notes: being a prototype, the final product might be changed from that photographed12498 -
CRKT - No Time Off by Flavio Ikoma - NoTimeOff - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel CTS BD-1 to 57 / 59HRC
Blade treatment: Satin
Handle: FRN with stainless steel liners
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 108mm.
Overall length: 184mm.
Thick when closed: -
Balancing: -
Weight: 167g.
Lock: Liner Lock with security system ILS Ikoma Lock Safety
Clips: stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design by Flavio Ikoma, opening system with ball bearing type IKBS opening type Carson FlipperC2906 -
Wander Tactical - Hurricane Military Tool - Dark Earth & Desert Micarta - knife
Intended use: Tactical / Collection
Type of production: Artisan
Production Country: Italy
Blade: D2 steel with cryogenic hardening
Treatment Lama: Dark Earth
Handle: Micarta Loveless
Blade length: 110 mm.
Blade thickness: 5.5 mm.
Overall length: 250 mm.
Balance: the branch guard
Weight: 300 g.
Sheath: Artisan in Kydex thermoformed, attack Tek-Lok type
Packaging: -
Notes: -12432 -
Wander Tactical - Hurricane Military Tool - PPK Desert - custom knife
The Hurricane PPK is adopted by the association PPA - Poaching Prevention Academy (Group of friends and experts in anti-poaching techniques joined with the Italian experts of Africa (IAEA). The intention is to act, giving logistical and operational support, to reduce poaching in Africa that put on risk of extiction many species. This knife is sold exclusively at Coltelleria Collini.
Intended use: Tactical / Collection
Type of production: Artisan
Production Country: Italy
Blade: D2 steel with cryogenic hardening
Treatment Lama: Dark Earth
Handle: Micarta Green Loveless
Blade length: 110 mm.
Blade thickness: 5.5 mm.
Overall length: 250 mm.
Balance: the branch guard
Weight: 300 g.
Sheath: Artisan in Kydex thermoformed, attack Tek-Lok type
Packaging: -
Notes: -WT-HUR-PPK -
Wander Tactical - Hurricane Military Tool - Black Blood - custom knife
2016 version: Now with a 6.5mm of blade thickness
Intended use: Tactical / Collection
Type of production: Custom
Production Lama: Italy
Blade: full tang, D2 steel, cryogenic treatment, to 59 / 61HRC
Blade treatment: Black Blood
Handle: Micarta Green
Blade length: 110 mm.
Blade thickness: 6.5mm.
Overall length: 250 mm.
Balance: on guard branch
Weight: 345g.
Sheath: Artisan, Kydex thermoformed with Tek-Lok attack
Packaging: -
Notes: being a prototype, the final product might be changed from that photographedWT-HUR -
Pohl Force - Alpha Five - Survival Plain Edge - 1048 - knife
Intended Use: Tactical collection
Type of production: Industrial
Blade: Stainless steel CTS-BD1
Treatment Lama: black
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: backward 1cm from the branch guard
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with logos Pohl Force - numbered certificate of guarantee - patch vinyl with velcro and logos Pohl Force - sticker logos Pohl Force
Notes: Inside the box there is a small pin to mount on the back of the blade to make the knife can be opened with one handPF-1048 -
Pohl Force - Three Foxtrott Survival 1044 - Knife
Pohl Force - Three Foxtrott Survival 1044 - Knife
Intended Use: Tactical / Military
Type of production: Industrial
Production Lama: Italy
Blade: Steel Niolox
Treatment Lama: black
Handle: G10 and Titanium
Blade length: 114mm.
Blade thickness: 5mm.
Closed Length: 145mm.
Overall length: 255mm.
Thick when closed: 15mm.
Balancing: -
Weight: 218g.
Closure: Frame Lock with safety Rotoblock
Clip: Removable, stainless steel
Sheath: -
Packaging: Cardboard box with nylon bag with zip and warranty certificates
Notes: Made in Italy by Lion SteelPF1044 -
Pohl Force - Alpha Five - Survival Serrated Edge - 1047 - knife
Intended Use: Tactical collection
Type of production: Industrial
Blade: Stainless steel CTS-BD1
Treatment Lama: black
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: backward 1cm from the branch guard
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with logos Pohl Force - numbered certificate of guarantee - patch vinyl with velcro and logos Pohl Force - sticker logos Pohl Force
Notes: Inside the box there is a small pin to mount on the back of the blade to make the knife can be opened with one hand12242 -
Pohl Force - Alpha Four - Survival Serrated Edge - 1045 - knife
Intended Use: Tactical collection
Type of production: Industrial
Blade: Stainless steel CTS-BD1
Treatment Lama: black
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: backward 1cm from the branch guard
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with logos Pohl Force - numbered certificate of guarantee - patch vinyl with velcro and logos Pohl Force - sticker logos Pohl Force
Notes: Inside the box there is a small pin to mount on the back of the blade to make the knife can be opened with one hand12241 -
Pohl Force - Alpha Four - Survival Plain Edge - 1046 - knife
Intended Use: Tactical collection
Type of production: Industrial
Blade: Stainless steel CTS-BD1
Treatment Lama: black
Handle: Zytel
Blade length: 113mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 18mm
Balancing: backward 1cm from the branch guard
Weight: 270g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with logos Pohl Force - numbered certificate of guarantee - patch vinyl with velcro and logos Pohl Force - sticker logos Pohl Force
Notes: Inside the box there is a small pin to mount on the back of the blade to make the knife can be opened with one hand12240 -
Cold Steel - Spartan folding Kopis - 21ST - knife
Utilisation: Sport
Type de production: industriel
Lame de production: Taiwan
Lame: acier inoxydable AUS 10A
Traitement de la lame: délavé
Manche: Grivory
Longueur de la lame: 114 mm.
Épaisseur de lame: 4mm.
Longueur fermé: 152 mm.
Longueur totale: 266mm.
Épaisseur une fois plié: -
Equilibrage: -
Poids: 260g.
Fermoir: Tri-Ad verrouillage
Clips: acier inoxydable amovible
Gaine: -
Conditionnement: boîte en carton avec des logos de Cold Steel
Notes: -CS21ST