military and tactical knives

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While retaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Dark Stone Washed
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While maintaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: satin finish
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

Rigorous efficiency or flexible dynamics? - A question that doesn't even arise for Alessandra de Santis's Boker Plus Gemtek. It can do both, not to mention the nuances in between. The designer from Hydra Design is known for her spirited creations with maximum functionality.

The Gemtek confidently joins this series and presents itself as a folding knife with a Frame Lock mechanism, featuring a Modified-Droppoint blade in high-performance D2 steel, which opens with a Flipper and impresses with its stonewash finish and a decorative false edge.

The handle front is made of gray G10, equipped with a discreet triangular texture for optimal grip. Carefully balanced elements such as the red spacers with an integrated loop and a G10 triangle on the back, reflecting the structure of the handle's front, elegantly complete the pocket knife's appearance.

The Tip-Up (r) clip allows for deep carry, ensuring the knife almost entirely disappears in the pants pocket. It comes with a high-quality nylon case for storage.

Intended use: Tactical

Type of production: Industrial
Country of production: Taiwan
Blade: in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 72mm.
Blade thickness: 3.7mm.
Total length: 176mm.
Weight: 132g.
Clip: removable stainless steel
Locking mechanism: Frame Lock
Packaging: nylon zippered case - cardboard box with Boker Plus logos
Notes: opening with Carson Flipper system on ball bearings - design by Alessandra De Santis

When blade length is limited, the need is not. Designed for easy carry and compactness, the Full Immunity™ features a less than 2.5-inch CPM-M4 blade with a Cobalt Black Cerakote® finish that boasts exceptional edge retention and strength in a Wharncliffe profile that tapers to an ultra-fine point. The included lanyard speeds retrieval from the pocket for manual use in emergency situations. Finished with anodized aluminum handles, the Full Immunity™ is a concentration of utility in a compact configuration.

Intended Use: Tactical

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-M4 62/64 HRC carbon steel
Blade finish: cobalt black cerakote
Handle: Aluminum
Blade length: 63mm.
Blade thickness: 2.3mm.
Length closed: 87mm.
Total length: 150mm.
Thickness when closed: 12.7mm.
Weight: 65g.
Closure: AXIS Lock
Clip: Tip Up, stainless steel, removable and reversible, mini deep carry type
Packaging: Cardboard box with Benchmade logos
Notes: -

When blade length is limited, the need is not. Designed for easy carry and compactness, the Full Immunity™ features a less than 2.5-inch CPM-M4 blade with a Cobalt Black Cerakote® finish that boasts exceptional edge retention and strength in a Wharncliffe profile that tapers to an ultra-fine point. The included lanyard speeds retrieval from the pocket for manual use in emergency situations. Finished with anodized aluminum handles, the Full Immunity™ is a concentration of utility in a compact configuration.

Intended Use: Tactical

Type of production: Industrial
Country of manufacture: USA
Blade: CPM-M4 62/64 HRC carbon steel
Blade finish: cobalt black cerakote
Handle: aluminum
Blade length: 63mm.
Blade thickness: 2.3mm.
Length closed: 87mm.
Total length: 150mm.
Thickness when closed: 12.7mm.
Weight: 65g.
Closure: AXIS Lock
Clip: Tip Up, stainless steel, removable and reversible, mini deep carry type
Packaging: Cardboard box with Benchmade logos
Notes: -

Intended Use: Tactical

Type of production: Industrial
Country of Production: USA
Blade: carbon steel CPM-M4 62/64 HRC
Blade finish: cobalt black
Handle: aluminum
Blade length: 63mm.
Blade thickness: 2.3mm.
Length closed: 87mm.
Total length: 150mm.
Thickness when closed: 12.7mm.
Weight: 65g.
Closure: AXIS Lock
Clip: Tip Up, stainless steel, removable and reversible, mini deep carry type
Packaging: Cardboard box with Benchmade logos
Notes: -

The Fox Pikal is a folding tactical knife specifically designed for martial arts practitioners. It was created with the collaboration of the personal defense instructor Giuliano Ron who, after two years of severe tests, combined the advantages of the Pikal style (handle with blade pointing down and edge facing the person) with the Karambit (rear ring for the index)

Intended use: Tactical / Military

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 182mm.
Weight: 113g.
Clip: reversible and removable, in painted stainless steel
Packaging: Cardboard box with Fox logos
Notes: Design by Giuliano Ron

As a Filipino martial arts enthusiast, Italian knife designer Alessandra De Santis of Hydra Design decided to design a Karambit knife for Boker Plus. These sickle-shaped knives originated in Southeast Asia and were preferably used for harvesting rice. In contrast, the Karambit from Boker Plus comes in a tactical guise. The 154CM Hawkbill blade effortlessly slices its way through cardboard and ropes, while the G10 handle and sturdy linerlock provide the necessary safety on the job.

Light weight and high efficiency form the backbone of the pocket knife named after the Norse goddess of the underworld. As an alternative to the flipper opening, the knife offers a thumb stud screwed into the back of the blade whose shape also serves as an "Emerson Wave"-style opening. Alessandra De Santis' characteristic angular design elements are found in the G10 ring at the end of the handle. The flush, reversible clip allows for flexible knife carrying. Supplied with a high-quality nylon pouch.


Intended Use: Tactical

Production type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel 154CM
Blade treatment: satin finish
Handle: G10
Blade length: 61mm.
Blade thickness: 2.8mm.
Total length: 170mm.
Weight: 93g.
Clip: removable and reversible, stainless steel
Closure: LinerLock 
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings and via "Emerson Wave" style pin - design by Alessandra De Santis

As a Filipino martial arts enthusiast, Italian knife designer Alessandra De Santis of Hydra Design decided to design a Karambit knife for Boker Plus. These sickle-shaped knives originated in Southeast Asia and were preferably used for harvesting rice. In contrast, the Karambit from Boker Plus comes in a tactical guise. The black-coated 154CM Hawkbill blade effortlessly slices its way through cardboard and ropes, while the black G10 handle and sturdy linerlock provide much-needed safety on the job.

Light weight and high efficiency form the backbone of the pocket knife named after the Norse goddess of the underworld. As an alternative to the flipper opening, the knife offers a thumb stud screwed into the back of the blade whose shape also serves as an "Emerson Wave"-style opening. Alessandra De Santis' characteristic angular design elements are found in the G10 ring at the end of the handle. The flush, reversible clip allows for flexible knife carrying. Supplied with a high-quality nylon pouch.


Intended Use: Tactical

Production type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel 154CM
Blade treatment: black coating
Handle: G10
Blade length: 61mm.
Blade thickness: 2.8mm.
Total length: 170mm.
Weight: 93g.
Clip: removable and reversible, stainless steel
Closure: LinerLock 
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings and via "Emerson Wave" style pin - design by Alessandra De Santis

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: full tang, stainless steel Elmax 60/62 HRC
Blade treatment: Black Top Shield
Handle: G-10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 140mm.
Weight: 60g.
Sheath: made of Kydex, with Ulti-Clip attachment
Packaging: cardboard box with Fox logos
Notes: Design by Denis Simonutti

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: full tang, stainless steel Elmax 60/62 HRC
Blade treatment: Black Top Shield
Handle: G-10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 140mm.
Weight: 65g.
Sheath: made of Kydex, with Ulti-Clip attachment
Packaging: cardboard box with Fox logos
Notes: Design by Denis Simonutti

The K-Talon is a karambit with a particularly thin full tang structure that, including sheath and grips, reaches a thickness of only 10 mm. The curved, hooked blade is designed inspired by the shape of a claw. It is designed to achieve precise, deep cuts while simultaneously hooking, trapping and/or ripping.

The back ring is designed to achieve a strong and secure grip in all conditions preventing the knife from sliding back and making it exceptionally difficult to disarm or turn against the user.

The very thin Kydex sheath has a quick release and comes with paracord that allows it to be used as a neck knife or attached to MOLLE-system platforms.

Intended use: tactical

Type of production: industrial
Country of production: Italy
Blade: full tang, stainless steel N690Co 58/60HRC
Blade finish: Dark Stone Washed
Handle: anodized anticorodal aluminum
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 175mm.
Weight: 130g.
Sheath: Kydex
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with multi-position, M.O.L.L.E.-compatible attachment systems.

Satre is a small, light and extremely resistant fixed blade knife. Given its characteristics, it is used in a wide range of disciplines and uses ranging from survival activity, bushcraft or as an element of an EDC (Every Day Carry) kit.

It was designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S.S. (Italian Federation of Sports and Experimental Survival).

In Neck Knife mode, through the use of a paracord 550 cord, it is possible to keep it around the neck by keeping the knife vertically with the handle facing downwards. The metal eyelets on the sheath made of pre-shaped Kydex allow the application of both the lanyard and the accessory holder.

The full-tang skeletonized structure allows you to customize the knife using paracord as a coating for the handle

This Black version uses the Böhler N690 heat treated at 58 HRC. This material is chosen for its resistance to oxidation, the durability of the wire and above all the reliability it has shown over the years.

Intended use: Neck / Hiking / Utility Knife

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black
Handle: stainless steel N690Co 58 / 60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78 g.
Sheath: in Kydex, for neck
Packaging: Cardboard box with Extrema Ratio logos
Note: possibility to use the sheath with Ulti-Clip systems, M.O.L.L.E. o Tek-Lok (available separately)

Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.

In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.

The full-tang skeleton structure allows to personalize the knife using the Paracord as a coating for the handle.

The Black S600 version uses Böhler S600 steel. This steel is used in industrial manufacturing to make metalworking tools and in mold making.

The high content of Molybdenum, Tungsten and a good presence of Vanadium in its chemical composition, give it excellent qualities of hardness, wear resistance and toughness. The presence of Cobalt favors the formation of small carbides uniformly distributed, a characteristic that enhances and elevates wear resistance.

Satre S600 is hardened and cryogenically treated, thus reaching an exceptional hardness of 64 HRC. This gives it great wear resistance and the ability to guarantee the cutting edge of the wire for a long time.

Böhler S600 has 4.5% Chromium, which makes it a carbon steel and therefore can cause rust and oxidation if neglected. To better protect it from atmospheric agents, we have chosen the new external coating EXP DARK.

The high hardness and resistance to wear and abrasion, make this steel not easy to sharpen.

Intended Use: Neck Knife / Hiking / Utility

Production type: industrial
Country of production: Italy
Blade: Carbon steel Bohler S600 64HRC
Blade treatment: Black EXP DARK
Handle:in carbon steel Bohler S600 64HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).

Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.

In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.

The full-tang skeleton structure, allows to personalize the knife using the Paracord as a coating for the handle.

The Stone Washed version uses Böhler N690 heat treated to 58 HRC. This material is chosen for its ability to resist oxidation, the durability of the edge and above all the reliability it has shown over the years.

Intended Use: Neck Knife / Hiking / Utility

Type of production: industrial
Country of production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade Treatment: Stone Washed
Handle: Stainless steel N690Co 58/60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total lenght: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).

Intended Use: Neck / Tactical / Military

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8A 58/60HRC
Blade Finish: Black Powder Coating
Handle: Stainless steel AUS-8A 58/60HRC
Blade Length: 68mm.
Blade thickness: 4.8mm.
Total length: 159mm.
Weight: 80g.
Scabbard: Thermoplastic, multi-position, with push-button retention system.
Package: Cardboard box with Spartan Blades Field Grade logos.
Note: Design by Iovito/Carey - The Field Grade series with Bronze color box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (company formed by Spartan Blades and Ka-Bar). In this series you can find the most iconic Spartan Blades designs offered at very aggressive and competitive prices.

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Taiwan
Blade: full tang stainless steel AUS-8 57/59HRC
Blade Finish: Powder coated
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Total length: 145mm.
Weight: 78g.
Sheath: ABS with clip
Notes: knife made for USSF

Production type: Industrial

Country of Production: USA
Blade: Stainless steel 440C
Blade treatment: Black Traction Coating
Handle: Stainless steel 440C
Blade Length: 56mm.
Blade thickness: 4.45mm.
Total length: 158mm.
Weight: 85g.
Scabbard: polymer, with clip attachment
Packaging: cardboard box with Benchmade logos
Notes: Design by Greg Thompson

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Acid Stone Washed
Handle: Acid Stone Washed Titanium with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 110g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: wire, AISI 302 stainless steel, removable and reversible
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Satin
Handle: Carbon Fiber with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 60g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: wire, AISI 302 stainless steel, removable and reversible
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Dark Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Dark Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: Carbon fiber and anodized titanium
Blade length: 60mm.
Blade thickness: 4mm.
Length closed: 88m.
Total length: 148mm.
Thick when closed: 11mm
Weight: 64g.
Closure: FrameLock in carbon fiber with stainless steel knocker
Clip: titanium anodized, machined from solid
Packaging: Display box made of transparent film
Notes: Opening by Carson Flipper system - Ball bearing movement - Design by Jesper Voxnaes - Winner of the 2018 Blade Show as "Overall Knife of the Year"

Intended use: Sports / Tactical / Collection

Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: Carbon fiber and anodized titanium
Blade length: 60mm.
Blade thickness: 4mm.
Length closed: 88m.
Total length: 148mm.
Thick when closed: 11mm
Weight: 64g.
Closure: FrameLock in carbon fiber with stainless steel knocker
Clip: titanium anodized, machined from solid
Packaging: Display box made of transparent film
Notes: Opening by Carson Flipper system - Ball bearing movement - Design by Jesper Voxnaes - Winner of the 2018 Blade Show as "Overall Knife of the Year"

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: Black Idroglider stonewashed
Handle: stonewashed aluminum
Blade length: 60mm.
Blade thickness: 4mm.
Length closed: 88m.
Total length: 148mm.
Thick when closed: 11mm
Weight: 84g.
Closing: Frame Lock with stainless steel knocker
Clip: burnished stainless steel
Packaging: cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Aluminum version of the model SURU Carbon Fiber, winner of the Blade Show 2018 as "Overall Knife of the Year"

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: Black Idroglider stonewashed
Handle: stonewashed aluminum
Blade length: 60mm.
Blade thickness: 4mm.
Length closed: 88m.
Total length: 148mm.
Thick when closed: 11mm
Weight: 84g.
Closing: Frame Lock with stainless steel knocker
Clip: burnished stainless steel
Packaging: cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Aluminum version of the model SURU Carbon Fiber, winner of the Blade Show 2018 as "Overall Knife of the Year"

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: Black Idroglider stonewashed
Handle: stonewashed aluminum
Blade length: 60mm.
Blade thickness: 4mm.
Length closed: 88m.
Total length: 148mm.
Thick when closed: 11mm
Weight: 84g.
Closing: Frame Lock with stainless steel knocker
Clip: burnished stainless steel
Packaging: cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Aluminum version of the model SURU Carbon Fiber, winner of the Blade Show 2018 as "Overall Knife of the Year"

Intended use: Tactical / Military

Type of production: Industrial
Country of production: Italy
Blade: full tang in N690Co stainless steel
Blade treatment: Black Idroglider
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 175mm.
Balancing: Set back
Weight: 95g.
Sheath: kydex, with belt clips made of synthetic material
Packaging: cardboard box with Fox FKMD logos
Notes: Fixed blade version of the FX-599 folding Mini Karambit model

Purpose: Sportsman / Tactical

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Black Idroglider
Handle: G10
Blade Length: 65mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total Length: 170mm.
Closure thickness: 14mm.
Balance: -
Weight: 98g.
Opening: KOR Kinetic Opening Ramp system by Bram Frank
Washers: Brass, with ball bearings
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Sheath: -
Packing: Cardboard box with Fox logos
Notes: Aluminum ring - Design by Bastinelli

Target: Tactical / CQC

Type of production: Industrial
Country of production: Italy
Blade: stainless steel Elmax 59/61HRC
Blade treatment: Black Hidroglider
Handle: carbon fiber and bronze CeraKote titanium
Blade Length: 62mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 174mm.
Closed thickness: 11mm.
Weight: 82g.
Opening: Carson Flipper system and Emerson Wave
Washers: Brass
Closure: Titanium Framelock with Stainless Steel Swing
Clip: Titanium, removable and reversible
Sheath: zip pocket in synthetic leather
Packing: cardboard box with Fox logos
Notes: Patents Emerson Pat. 5.878.500

Target: Tactical / CQC

Type of production: Industrial
Country of production: Italy
Blade: Elmax stainless steel 59/61HRC
Blade treatment: satin finish
Handle: carbon fiber and titanium
Blade Length: 62mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Total length: 174mm.
Closed thickness: 11mm.
Weight: 82g.
Opening: Carson Flipper system and Emerson Wave
Washers: Brass
Closure: Titanium Framelock with Stainless Steel Swing
Clip: Titanium, removable and reversible
Sheath: zip pocket in synthetic leather
Packing: cardboard box with Fox logos
Notes: Patents Emerson Pat. 5.878.500

Fox - Dart Tanto Karambit Training by Doug Marcaida - FX-597TK - knife

Intended use: Tactical Training

Type of production: Industrial
Production Lama: Italy
Blade: stainless steel 420 with tip and rounded blade
Blade treatment: -
Handle: G-10
Blade length: 64mm.
Blade thickness: 3mm.
Closed Length: 120mm.
Overall length: 185mm.
Thick when closed: -
Balancing: -
Weight: 104g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Fox FKMD
Notes: Developed by Doug Marcaida and Lad Mandiola - Opening Wave by Emerson

This knife was designed and perfected in every detail for its primary use in the marine environment. The blade has a flat rounding that allows symmetrical cutting work with wider support. The tip, on the other hand, which is thick and durable thanks to the tanto version, allows greater penetration and a sharper, more precise cut. The stone washed finish process facilitates locating in the marine environment.

The structure of the handle, made of anodized anticorodal aluminum, features a design with milling in concentric circles and lightening and anti-slip perforations so as to facilitate rinsing from saltiness. A small slot is cut into the middle of the cheek piece to allow for tightening or releasing smaller shackles. BF2 V is equipped with reversible clip; adjusting screw retainer for closing and opening the blade; 70-mm. knot shock ankle with fastening mechanism; and correctable. The presentation of the BF2 V took place on the Amerigo Vespucci School Ship.




Intended use: sporting/nautical

Type of production: industrial
Blade: stainless steel N690Co 58HRC with Stone Washed finish
Country of Production: Italy
Handle: Anticorodal with stainless steel reinforcements
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 190mm.
Weight: 149g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Notes: Anklet/knife lock - Small sized turnbuckle - Quick-release tactical corrector - Open knife safety catch - Safety catch for Anklet/knife lock

Intended use: tactical / military

Type of production: industrial
Blade: full tang in stainless steel AUS-8 57 / 59HRC
Blade treatment: nitriding
Handle: Zytel
Blade length: 63mm.
Blade thickness: 3mm.
Length closed: -
Total length: 145mm.
Balancing: -
Weight: 78g.
Closure: -
Clip: -
Sheath: ABS with clip
Note: -