military and tactical knives

In this new edition of the Defender FX-689, we have focused our attention on the blade, introducing an extraordinary 5 mm thick N690Co blade, which gives it particularly high strength. The handle features deep transverse grooves for an extremely secure grip.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Microbead blasting
Handle: Walnut wood with through-guard and steel pommel
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 350g.
Sheath: leather
Packaging: cardboard box with Fox logos
Notes: -

Intended Use: Multirole / Utility

Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade finish: Raw, with compound type sharpening
Handle: Micarta
Blade length: 150mm.
Blade thickness: 5mm.
Total length: 295mm.
Balance: advanced
Weight: 395g.
Sheath: thermoformed Kydex with multi-position belt loop, MOLLE compatible
Packaging: polypropylene case with Wander Tactical logos and certificate of authenticity signed and dated
Notes: Particular unique specimen with compound type sharpening

The M-PAT was created by U.S. military service member Seth Brown and was designed specifically for fighter jet crews. Its slim profile and sturdy size are designed it specifically so that it can be carried on the safety vest or otherwise at the top of the torso in order to cause as little discomfort as possible while in the flight deck. It is ideal for vertical carrying and, thanks to the two retention modes of the sheath, it will not go anywhere until you need it. The M-PAT's applications extend outside the cockpit and it is perfectly suited to a belt or tactical vest. It is always handy when you need it and out of the way when you don't. When you only have room for one knife for self-defense and survival, there's the M-PAT.


Intended Use: Tactical/Military

Type of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Coyote Tan Coating
Handle: Canvas Micarta
Blade Length: 124mm.
Blade thickness: 4.8mm.
Total Length: 248mm.
Balance: on the guard branch
Weight: 309g.
Sheath: kydex
Packaging: transparent plastic bag
Notes: Emergency whistle - Design by Seth Brown

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balancing: backward
Weight: 201g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings or usable as a neck knife
Packaging: -
Notes: unique knife with Clip point tip, handcrafted

Production Type: Artisan
Blade Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw Finish
Handle: Micarta
Blade Length: 243mm.
Blade thickness: 6mm.
Total length: 400mm.
Balance: backward
Weight: 662g.
Sheath: made of thermoformed kydex
Packaging: -
Notes: unique and handcrafted knife

For SOG's 20th anniversary in 2006, a new adaptation of the original SOG Bowie, one of the company's signature knives, was released. This oversized blade knife will amaze you with its precise and aesthetically accurate construction to that of the 1980s. Unlike the original, all parts are protected by a black TiNi coating to give the knife a more aggressive look and better performance.

Intended use: collection / tactical / military / vintage

Type of production: industrial
Blade: AUS-8 stainless steel
Blade finish: titanium nitriding
Handle: Leather rings
Blade length: 190mm.
Blade thickness: 6.5mm.
Total length: 326mm.
Balance: backward
Weight: 485g.
Scabbard: leather
Notes: -

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

Haast Eagle model .: unique piece.

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 135mm.
Blade thickness: 6.5mm.
Total length: 285mm.
Balancing: backward
Weight: 378g.
Sheath: in black leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel
Send feedback
History
Saved
Community

Destination of use: tactical / hunting / collection

Type of Production: industrial
Blade: 420 stainless steel
Lama Italy production
Handle: in wood
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 310mm.
Balancing: backward, to 1cm. from the guard branch
Weight: 318g. (520g with scabbard)
Closure: -
Clip: -
Sheath: in leather
Packaging: cardboard box
Notes: Engraving on the blade "4eme REGIMENT ETRANGER" Engraving on the knob of the handle: "Foreign Legion 4 Regiment Logo"

Intended use: Sports / Tactical

Type of production: Industrial
Production Country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Surface treatment: Blackwash
Handle: Titanium bronzed
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 130mm.
Overall length: 225mm.
Thick when closed: 14.5mm
Weight: 180g.
Closing: Framelock
Clip: Removable, stainless steel
Packaging: cardboard box with Fox Knives logos
Notes: Design by Rob Walker

Intended Use: Collection / Sports
Industrial production
Production Country: Taiwan
Blade: 440C
Blade treatment: satin two-tones
Handle: walnut wood with mosaic pin
Blade length: 227mm.
Blade thickness: 6.5mm.
Overall length: 362mm.
Weight: 472G.
Sheath: Leather
Packaging: gift box with warranty card and microfiber cloth for cleaning
Notes: Edition in numbered and limited edition - Design by Anders Högström

In collaboration with Wander Tactical, we have decided to offer their model TACTICO URO in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.

Use: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: in CoS SanMai steel 61.5 HRC
Lama treatment:
Handle: Micarta
Blade length: 135mm.
Blade thickness: 6.5mm.
Total length: 285mm.
Balancing: set back
Weight: 470g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Special edition limited edition "Factory Custom Knife" in collaboration with Rick Hinderer. The peculiarity of this model is very rare to mount both industrial parts made from Zero Tolerance, which custom parts made specifically from Hinderer in his workshop. Specifically, all the titanium screws, spacers, clips, clips and covers all the parts in golden color are made entirely by hand.

Intended Use: Collection / Sports

Type of production: Industrial parts with craft
Production Lama USA
Blade: Stainless steel CTS-204P
Treatment Lama: dual tone, with satin carry in bronze
Handle: Titanium anodized bronze, with gold trim
Blade length: 8.9mm.
Blade thickness: 4mm.
Length closed: 119mm.
Overall length: 208mm.
Thick when closed: 14mm.
Balancing: -
Weight: 164g.
Closure: Frame Lock
Clip: Removable, Multi position, anodized titanium
Sheath: -
Packaging: logos collection Zero Tolerance, warranty and authenticity with the serial number of the knife
Notes: Design by Rick Hinderer - opening system KVT on ball bearings with engagement by Flipper

Destinazione d'uso: caccia/collezione

Tipo di Produzione: industriale
Lama: in acciaio inox 440
Produzione Lama Italy
Manicatura: in legno di palissandro
Lunghezza lama: 180mm.
Spessore della lama: 5mm.
Lunghezza totale: 310mm.
Bilanciatura: arretrata, ad 1cm. dal ramo di guardia
Peso: 330g.
Chiusura: -
Clip: -
Fodero: in cuoio con attacchi molle
Confezione: scatola di cartone 
Note: Incisione sulla lama "2° REGIMENT ETRANGER PARACHUTISTES". Incisione sul pomello dell'impugnatura: "Logo Para' Commando"

Intended use: Sport

Type of production: Industrial
Production Lama: China
Blade: 440A stainless steel
Treatment Lama: Browning
Handle material: Micarta
Blade length: 170mm.
Blade thickness: 5mm.
Length closed: -
Total length: 305mm.
Thick when closed: -
Balance: -
Weight: 395g.
Closing: -
Clip: -
Sheath: Cordura
Packaging: Cardboard box with logos Boker Magnum
Notes: -

Destinazione d'uso: caccia/collezione

Tipo di Produzione: industriale
Lama: in acciaio inox 440
Produzione Lama Italy
Manicatura: in legno di palissandro
Lunghezza lama: 180mm.
Spessore della lama: 5mm.
Lunghezza totale: 310mm.
Bilanciatura: arretrata, ad 1cm. dal ramo di guardia
Peso: 330g.
Chiusura: -
Clip: -
Fodero: in cuoio con attacchi molle
Confezione: scatola di cartone 
Note: Incisione sulla lama "3 Regiment Etranger d'Infanterie" Incisione sul pomello dell'impugnatura: "Logo Legione Straniera 3 R.E.I"

Destinazione d'uso: caccia/collezione

Tipo di Produzione: industriale
Lama: in acciaio inox 420
Produzione Lama Italy
Manicatura: in legno
Lunghezza lama: 180mm.
Spessore della lama: 5mm.
Lunghezza totale: 310mm.
Bilanciatura: arretrata, ad 1cm. dal ramo di guardia
Peso: 330g.
Chiusura: -
Clip: -
Fodero: in cuoio
Confezione: scatola di cartone 
Note: Incisione sulla lama "6 R.E.G. Legio Patria Nostra" Incisione sul pomello dell'impugnatura: "Logo Legione Straniera 6 Reggimento - 6e rgiment tranger de gnie"