Movies and Videogames
-
Museum Replicas Windlass - Helmet of Themistocles - 881014 - wearable helmet
Fully wearable reproduction of Themistokles helmet from the movie 300 Rise of an Empire.
The helmet is made of steel with an antique bronze finish, has a soft padded fabric lining inside, adjustable with leather laces, which can be worn by most people.
Dimensions: about 30 x 30 x 20 cm
881014 -
Museum Replicas Windlass - Centurion Gladius 501430 - Gladio - historical sword
Faithful reproduction of the Roman sword produced by Windlass
Blade: 1095 carbon steel
Handle: in wood and bronze
Blade length: 50cm.
Total Length: 71cm.
Blade thickness: 1.5mm.
Balancing: advanced
Weight: 765g.
Sheath: in leather, hand-sewn, with bronze finishes
Notes: balanced, perfect for exposition or historical re-enactment501430 -
Museum Replicas Windlass - 100298 Monks Robe Red - Medieval clothing
Museum Replicas Windlass - 100298 Monks Robe - Medieval clothing This costume monaco, already seen in the movie "The Crimson Rivers" with Jean Reno or in the movie "The Name of the Rose" with Sean Connery, releases mystery and religiosity and conveys a great magnetism towards the wearer. Completely made of heavy brown cotton, has a hood and rope belt.100298R -
Windlass - Altair Under Tunic
This under tunic is from Assassin's Creed and worn by Altair the Assassin. His long sleeve under tunic is a soft gray and made of 100% cotton. Coordinates with the Altair Over Tunic with Hood #883002, which is also shown in the picture. The complete outfit is shown here, but to get the look you have to purchase all the pieces or look in our Complete Outfits for Men section. Choose from sizes S/M or L/XL. Key Features: Licensed from the video game 'Assassin's Creed' Top quality construction and fabric Worn by Altair the Assassin883001 -
Museum Replicas Windlass - Braveheart - The Sword of William Wallace - movie props
Reproduction, made by Windlass, of the William Wallace's sword, used by Mel Gibson in the BraveHeart movie.
Total length: 154.5 cm
Blade length: 120 cm - NOT WRENCHED
Steel: High carbon content (it is recommended to periodically maintain oil to avoid oxidation)
Blade thickness: 4.4 mm
Weight: 2.98 kgThe handle (25.5 cm) and the first part of the blade are covered in leather.
501421 -
Museum Replicas Windlass - Conan - Father Sword Bronze - 884017 - fantasy sword
Faithful official reproduction of Conan's Father's sword, taken from the movie "Conan the Barbarian"
Handcrafted by Windlass Steelcrafts® expert blacksmiths
- Blade in 1085 high carbon steel hardened to 52 HRC
- handle: in leather with knob and finely chiseled bronze hiltBlade length: 72 cm
Total length: 96
Weight: about 2.36 kg
Blade thickness: 4mm
Edition accompanied by certificates of authenticity.© 2011 Conan Properties International, LLC. Conan ®, Conan the Barbarian ®, and all related logos, characters, names, and distinctive likenesses thereof are trademarks of Conan Properties International LLC unless otherwise noted. All Rights Reserved. Museum Replicas Limited Authorized User.
884017 -
Museum Replicas Windlass - Tunica Crusade Hospital 100590 + 100588 Hood and Belt - Medieval clothing
Museum Replicas Windlass - Tunica Crusade Hospital 100590 + 100588 Hood and Belt - Medieval clothing
Worn by the crusaders of the hospital, this long brown cotton tunic has a large white cross embroidered on the chest and a flashy belt rope.
And 'completed by strips of chain mail antiqued to give the illusion of wearing a complete armor beneath his tunic knit.
The tunic also comes complete with a heavy cotton hood with cross embroidered on the left shoulder.
Material: 100% cotton100588 -
Windlass - Crusader Priest Robe
This holy follower wears both the blood red front tabard of the Crusades, while also the gold embroidered lion rampant of King Richard. Full pure white cotton robe with matching hood and cap. Heavy gold applique adorns the sleeves. Dry clean only. Choose S/M or L/XL. Key Features Licensed from the video game 'Assassin's Creed' Top quality construction and fabric Worn by the Crusader Priest883010 -
Pohl Force - MK-9 Last Blood Heartstopper - Rambo 5 CNC² Edition - knife
With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.
The Pohl Force LAST BLOOD® CNC² Edition MK-9 is a perfectly designed knife in the eye-catching Spear Point style that looks like a modern, tactical tool in the unmistakable Pohl design.
Only strong and high quality materials are used for its manufacturing: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives the 23cm long and 6mm thick blade a high corrosion resistance and an excellent edge retention. The full tang construction is topped with a micarta handle that ends in an aesthetic element that can be used as a striking tool.
The micarta machining gives the handle a distinctive look with three-dimensional millings, and the handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. A subhilt on the underside of the handle provides maximum control in handling the blade giving the MK-9 a distinctive look. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.
The knife comes with a leather sheath of the highest quality and is sold with a 3D Velcro patch and a cloth for care and cleaning.
Intended Use: Collection
Blade: Full tang stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: Micarta
Blade length: 230mm.
Blade thickness: 6mm.
Total lenght: 380mm.
Weight: 658g.
Scabbard: Leather
Packaging: 3D Velcro patch - Cleaning clothPF-5003 -
Pohl Force - MK-8 Last Blood Bowie - Rambo 5 CNC² Edition - knife
With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.
The Pohl Force LAST BLOOD® CNC² Edition MK-8 is a perfectly designed knife in the classic Bowie style that, despite its historical roots, presents itself as a modern, tactical tool in the unmistakable Pohl design.
Only high quality, durable materials are used in its construction: Stainless steel 90Cr18MoV (440C) hardened to 57/58HRC gives the 20cm long, 6mm thick Bowie blade high corrosion resistance and excellent edge retention. The full tang construction culminates in a G-10 handle that finishes with a unique aesthetic element that impresses with its dramatic design.
The black surface with three-dimensional millings on the handle contrasts colourfully with the blade in a two-tone finish. The handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. It is completed by the ever-present knotted paracord camouflage lanyard that distinguishes all Pohl Force productions and corresponds exactly to the same paracord used in the filming of the movie.
The knife comes with a top-quality leather sheath and is sold with a 3D Velcro patch and a cloth for care and cleaning.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: In G-10
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 350mm.
Weight: 538g.
Scabbard: Leather
Packaging: 3D Velcro patch - Cleaning clothPF-5002 -
Pohl Force - MK-9 Last Blood Heartstopper - Rambo 5 CNC² Edition - Kydex Set - knife
With the Pohl Force MK-8 and MK-9 knives at its side, the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen, comes to an end.
The Pohl Force LAST BLOOD® CNC² Edition MK-9 is a perfectly designed knife in the eye-catching Spear Point style that looks like a modern, tactical tool in the unmistakable Pohl design.
Only strong and high quality materials are used for its manufacturing: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives the 23cm long and 6mm thick blade a high corrosion resistance and an excellent edge retention. The full tang construction is topped with a micarta handle that ends in an aesthetic element that can be used as a striking tool.
The micarta machining gives the handle a distinctive look with three-dimensional millings, and the handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. A subhilt on the underside of the handle provides maximum control in handling the blade giving the MK-9 a distinctive look. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.
The knife comes with a high quality thermoformed Kydex® sheath with belt loop and thigh stopper and is sold with a certificate of manufacture, a 3D Velcro patch, a care and cleaning cloth and a Nylon Zip bag with Pohl Force logos.
Each knife is numbered on both the blade and certificate.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: Micarta
Blade length: 230mm.
Blade thickness: 6mm.
Total lenght: 380mm.
Weight: 658g.
Scabbard: Thermoformed, in Kydex
Package: Warranty certificate with serial number - 3D Velcro patch - Cleaning cloth - Soft Nylon pouch with zipper and Pohl Force logos.PF-5113 -
Pohl Force - MK-8 Last Blood Bowie - Rambo 5 CNC² Edition - Kydex Set - knife
With the Pohl Force MK-8 and MK-9 knives at its side comes the conclusion of the legendary Rambo series (1982-2019), which like no other has made the knife the most important part of its equipment on the big screen.
The Pohl Force LAST BLOOD® CNC² Edition MK-8 is a perfectly designed knife in the classic Bowie style that despite its historical roots presents itself as a modern, tactical tool in the unmistakable Pohl design.
Only high quality and resistant materials are used for its production: the stainless steel 90Cr18MoV (440C) hardened at 57/58HRC gives to the Bowie blade, 20cm long and 6mm thick, a high resistance to corrosion and an excellent edge retention. The full tang construction culminates in a G-10 handle that ends in a unique aesthetic element that impresses with its dramatic design.
The black surface with three-dimensional millings on the handle sits in chromatic contrast to the two-tone finish blade. The handle and blade are visually connected by a CNC-milled guard machined from a solid block of stainless steel. It is completed by the ever-present knotted camouflage paracord lanyard that distinguishes all Pohl Force productions and matches exactly the same paracord used in the filming of the movie.
The knife comes with a high quality thermoformed Kydex® sheath with belt loop and thigh stopper and is sold with a certificate of manufacture, a 3D Velcro patch, a care and cleaning cloth and a Nylon Zip bag with Pohl Force logos.
Each knife is numbered on both the blade and certificate.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57/58HRC
Handle: In G-10
Blade length: 200mm.
Blade thickness: 6mm.
Total length: 350mm.
Weight: 538g.
Scabbard: Thermoformed, in Kydex
Package: Warranty certificate with serial number - 3D Velcro patch - Cleaning cloth - Soft Nylon pouch with zipper and Pohl Force logos.PF-5112 -
Museum Replicas Windlass - Leif Erikson Sword - 501651 - Viking sword
Leif is believed to have been born around 970, second son of Erik the Red (Eiríkr Rauði), a Norwegian, son of Thorvald Asvaldsson, great grandson of Naddoddr, the discoverer of Iceland. His mother was Þjoðhildur. His father had founded two Viking colonies, the Western Settlement and the Eastern Settlement, in Greenland, a land to which he himself had given its name.
High carbon steel blade, robust and well white. The pommel and guard are richly carved and decorated with sea dragons and intertwined knots. The wooden handle is covered in black leather and features three knotted rings. The sword comes with a black leather scabbard with decorations and a leather belt.
Blade: 1065 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 74.5cm.
Blade thickness: 4mm.
Weight with scabbard: 1535g.
Sheath: leather with bronze mounts
Notes: the blade is not sharp501651 -
Museum Replicas Windlass - Damascus Viking Sword 500262 - Viking sword
Although iron was a tougher material than bronze it would frequently bend. Damascus, or pattern welded steel, was used to make the blade strong enough to withstand the rigors of combat. Early Viking swords were forged from layers of iron interwoven with strands of steel to produce a very tough sword. This sword is based on an original circa 850-900 AD sword discovered in Finland. The Damascus Viking Sword is made of high carbon Damascus steel. The blade is polished with the fuller acid etched to bring out the beautiful Damascus pattern. The pommel and crossguard are made of solid steel and the grip is leather wrapped wood. Includes a matching wood scabbard with a black leather covering and steel mounts. A very nice example of a true Viking sword.
Blade: 1070 carbon steel damask battle ready
Handle: in leather and metal
Total length: 91.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard 1304g.
Weight with no sheath 938g.
Sheath: wood covered with leather with metal fittings
Note: -500262 -
Museum Replicas Windlass - Viking Sword 501472 - sword
Blade: 1050 battle ready carbon steel
Handle: in wood and bronzed metal
Total length: 94.5cm.
Blade length: 76.5cm.
Blade thickness: 4mm.
Internal handle length 170 cm: external 17.5cm
Weight with scabbard: 1404g.
Sheath: leather with bronze fittings
Note: -501472 -
Museum Replicas Windlass - Gladiator - Tigris Axe 880011
Museum Replicas Windlass - Gladiator - Tigris Axe 880011
From the classic movie Gladiator comes the Axe of Tigris. Features all steel and brass construction with a high carbon steel blade. Includes wall plaque. Made by Windlass Steelcrafts.
Blade: Carbon Steel 1095
Handle: Steel
Blade length: 25cm.
Total length: 75 cm.
Blade Thickness: 5mm.Weight: 2014g.
wooden display support© 2010 DW Studios LLC. All Rights Reserved.
880011 -
Museum Replicas Windlass - The Eagle - Sword of Marcus Aquila - Gladio - products from films
Faithful reproduction of the sword of Marcus Aquila, produced by Windlass and from the movie "The Eagle", the epic film of 2011 with Channing Tatum and film adaptation of the novel "The Eagle of the Ninth Legion" by Rosemary Sutcliff.
Blade steel: 1095 Carbon blunt
Handle: wood and bronze
Blade length: 50.3cm.
Total length: 70cm.
Blade thickness: 1.5mm.
Balancing: Advanced
Weight: 815g.
Sheath: leather, hand-sewn, finished in bronze
Notes: Manufactured under license film official Universal Studios888005 -
Capitan America - Scudo ufficiale 1942 - edizione limitata 500pz - prodotto ufficiale Marvel
Esclusiva e autentica riproduzione dello scudo ufficiale di Capitan America, prodotto dalla Windlass su licenza Marvel Entertainment.
Realizzato in scala 1:1 utilizzando le immagini ufficiali dai fumetti Marvel.
Ogni pezzo è stato assemblato e finito a mano.
All'interno della confezione è presente un certificato di autenticità, il numero di serie e un supporto da muro.
Pezzi prodotti per questa serie: 500
Dimensioni: 75 x 58 cm
Peso: 3,80 kg885018 -
Museum Replicas Windlass - Conan - Atlantean Sword Bronze - spada fantasy
Fedele riproduzione ufficiale della spada di Conan, tratta dal film "Conan il Barbaro"
Prodotto realizzato a mano da esperti forgiatori della Windlass Steelcrafts®
- Lama in acciaio 1085 high carbon steel temprato a 52 HRC
- impugnatura: in corda con pomolo e elsa in bronzo finemente cesellate
Lunghezza lama: 72,5 cm
Lunghezza totale: 101
Peso: 3.10 kg circa
Spessore lama: 4,5 mm
Edizione corredata di certificati di autenticità.
© 2011 Conan Properties International, LLC. Conan ®, Conan the Barbarian ®, and all related logos, characters, names, and distinctive likenesses thereof are trademarks of Conan Properties International LLC unless otherwise noted. All Rights Reserved. Museum Replicas Limited Authorized User.W884016 -
Museum Replicas Windlass - Conan - Valeria Sword Bronze - spada fantasy
Fedele riproduzione ufficiale della spada di Valeria, tratta dal film "Conan il Barbaro"
Prodotto realizzato a mano da esperti forgiatori della Windlass Steelcrafts®
- Lama in acciaio 1085 high carbon steel temprato a 52 HRC
- impugnatura: in legno con pomolo in bronzo finemente cesellate
Lunghezza lama: 66 cm
Lunghezza totale: 95
Peso: 1.85 kg circa
Spessore lama: 4,6 mm
Edizione corredata di certificati di autenticità.
© 2011 Conan Properties International, LLC. Conan ®, Conan the Barbarian ®, and all related logos, characters, names, and distinctive likenesses thereof are trademarks of Conan Properties International LLC unless otherwise noted. All Rights Reserved. Museum Replicas Limited Authorized User.3328 -
Museum Replicas Windlass - Elmo spartano - ufficiale di "300" - 881002
300 è un film del 2007 diretto da Zack Snyder con il supporto di Frank Miller, adattamento cinematografico del graphic novel 300; quest'ultimo è stato a sua volta ispirato a un altro film, The 300 Spartans, un racconto semi-storico della battaglia delle Termopili svoltasi nel 480 a.C.
Il film è stato girato con la tecnica del chroma key per riprodurre le immagini dell'originale fumetto. È uscito nelle sale negli USA il 9 marzo 2007, mentre in Italia il 23 marzo 2007.
Robusto e indossabile elmo utilizzato dai guerrieri spartani
Replica tratta dal film di "300"
Materiali: acciaio placcato bronzo anticato con allacciature in cuoio881002 -
Museum Replicas Windlass - Spartacus Arena Sword - prodotti tratti da film
Spada ufficiale prodotta dalla Windlass e tratta dalla serie televisiva "Spartacus" - Blood and Sand.
Lama: Acciaio forgiato a mano in acciaio al carbonio
Impugnatura: in legno, e metallo
Lunghezza Lama: 61,5cm.
Lunghezza Totale: 84cm.
Spessore Lama: 3mm.
Bilanciatura: avanzata, a 12cm. dal ramo di guardia
Peso: 1440g.8701 -
Museum Replicas Windlass - Spartacus Sica Arena Sword - prodotti tratti da film
Spada ufficiale prodotta dalla Windlass e tratta dalla serie televisiva "Spartacus" - Blood and Sand.
Lama: Acciaio forgiato a mano in acciaio al carbonio
Impugnatura: in legno, e metallo
Lunghezza Lama: 61cm.
Lunghezza Totale: 80cm.
Spessore Lama: 3mm.
Bilanciatura: avanzata, a 12cm. dal ramo di guardia
Peso: 900g.8700 -
Museum Replicas Windlass - Sword of Ibelin 500816 - The Crusades - Artisan Sword
Blade: carbon steel
Handle: wood and leather
Knob: aluminum alloy
Guard: aluminum alloy
Sheath: -
Blade length: 91cm.
Handle Length: 15cm.
Total Length: 114cm.
Blade width: 50mm.
Blade thickness: 3mm.
Weight: 1360g.
Weight with Sheath: -
Balancing: Advanced to 9cm.
Support: Painted wooden wall plate500816 -
Museum Replicas Windlass - Sword of Robin Hood 882501 - prodotti tratti da film
Replica ufficiale dietro licenza ufficiale Universal Pictures, della spada di Robin Hood diretto da Ridley Scott.
Lama: Acciaio al carbonio 1050 battle ready
Impugnatura: in metallo e legno
Lunghezza Lama: 89cm.
Lunghezza Totale: 101,5cm.
Spessore Lama: 4mm.
Peso: 1890g.
Fodero: non compreso.882501 -
Windlass - 300 - Leonidas Spartan Sword - 881010 - products based on films
This battle ready sword, faithfully reproduces the sword of Sparta used in the 300 and 300 Rise of an Empire movies.
Blade: 1050 battle ready carbon steel
Handle: Burnished steel and finely stitched leather
Blade length: 65cm.
Total length: 76.50cm.
Blade thickness: 3mm.
Balance: advanced, at 7cm. from the guard branch
Weight: 1250g.
Sheath: in leather881010 -
Windlass - Altair Overtunic with Hood - Assassin's Creed
Cappuccio e sovratunica smanicata di Altair, realizzata in cotone bianco con dettagli ricamati in nero e argento.
Il prodotto può essere coordinato con la sottotunica art. 883001
Prodotti dotati di licenze ufficiali Ubisoft/Assassin's Creed
Ulteriori accessori presenti nell'immagine, sono venduti separatamente883002 -
Windlass - Helm of King Leonidas - From the movie "300" - 881003 - clothing
Faithful reproduction of the helmet used by King Leonidas in the film "300".
Manufacturer: Windlass.
The helmet, wearable, is made of steel with a bronze-effect plating, leather lining, synthetic crest. Equipped with exhibition support.
Dimensions: about 30 x 45 x 20 cm, crest included.
881003 -
Windlass - The Gladiator - faithful reproduction of Maximus's Gladio - film-based products
Faithful reproduction produced by Windlass, of the sword taken from the movie "The Gladiator", epic film of 2000, directed by Ridley Scott and starring Russell Crowe.
Exhibition product
Blade: Carbon steel
Handle: in synthetic material, wood and bronze
Blade length: 75cm.
Total Length: 97cm.
Blade thickness: 3mm.
Balancing: advanced, at 3cm. from the guard branch
Sheath: in wood and leather with brass fittings
Weight: 1450g.880012