Neck Knives: your reliable daily companion

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While retaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: Dark Stone Washed
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

The kiridashi is a traditional Japanese cutting tool that has ancient roots in culture and tradition; Extrema Ratio has revised according to its style this knife belonging to Japanese tradition giving it a more tactical look than the original. While maintaining the characteristic chisel rounding, KIRI has a special tip designed to achieve a high penetration efficiency. 

Extrema Ratio KIRI is available in Dark Stone and Satin finishes, both made of Böhler N690 steel hardened to 58HRC. The handle consists of two black-colored anodized anticorodal aluminum grips. The preshaped Kydex sheath is equipped with metal eyelets that allow paracord lanyard to be attached to MOLLE system platforms as well.

Intended use: Neck knife / Utility

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58/60HRC
Blade treatment: satin finish
Handle: stainless steel N690Co 58/60HRC
Blade length: 60mm.
Blade thickness: 5mm.
Total length: 190mm.
Weight: 112g.
Sheath: in Kydex, for neck
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility of using the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (may be purchased separately)

Satre is a small, light and extremely resistant fixed blade knife. Given its characteristics, it is used in a wide range of disciplines and uses ranging from survival activity, bushcraft or as an element of an EDC (Every Day Carry) kit.

It was designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S.S. (Italian Federation of Sports and Experimental Survival).

In Neck Knife mode, through the use of a paracord 550 cord, it is possible to keep it around the neck by keeping the knife vertically with the handle facing downwards. The metal eyelets on the sheath made of pre-shaped Kydex allow the application of both the lanyard and the accessory holder.

The full-tang skeletonized structure allows you to customize the knife using paracord as a coating for the handle

This Black version uses the Böhler N690 heat treated at 58 HRC. This material is chosen for its resistance to oxidation, the durability of the wire and above all the reliability it has shown over the years.

Intended use: Neck / Hiking / Utility Knife

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black
Handle: stainless steel N690Co 58 / 60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78 g.
Sheath: in Kydex, for neck
Packaging: Cardboard box with Extrema Ratio logos
Note: possibility to use the sheath with Ulti-Clip systems, M.O.L.L.E. o Tek-Lok (available separately)

Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.

In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.

The full-tang skeleton structure allows to personalize the knife using the Paracord as a coating for the handle.

The Black S600 version uses Böhler S600 steel. This steel is used in industrial manufacturing to make metalworking tools and in mold making.

The high content of Molybdenum, Tungsten and a good presence of Vanadium in its chemical composition, give it excellent qualities of hardness, wear resistance and toughness. The presence of Cobalt favors the formation of small carbides uniformly distributed, a characteristic that enhances and elevates wear resistance.

Satre S600 is hardened and cryogenically treated, thus reaching an exceptional hardness of 64 HRC. This gives it great wear resistance and the ability to guarantee the cutting edge of the wire for a long time.

Böhler S600 has 4.5% Chromium, which makes it a carbon steel and therefore can cause rust and oxidation if neglected. To better protect it from atmospheric agents, we have chosen the new external coating EXP DARK.

The high hardness and resistance to wear and abrasion, make this steel not easy to sharpen.

Intended Use: Neck Knife / Hiking / Utility

Production type: industrial
Country of production: Italy
Blade: Carbon steel Bohler S600 64HRC
Blade treatment: Black EXP DARK
Handle:in carbon steel Bohler S600 64HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).

Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.

It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.

In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.

The full-tang skeleton structure, allows to personalize the knife using the Paracord as a coating for the handle.

The Stone Washed version uses Böhler N690 heat treated to 58 HRC. This material is chosen for its ability to resist oxidation, the durability of the edge and above all the reliability it has shown over the years.

Intended Use: Neck Knife / Hiking / Utility

Type of production: industrial
Country of production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade Treatment: Stone Washed
Handle: Stainless steel N690Co 58/60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total lenght: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).

Intended Use: Neck / Tactical / Military

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8A 58/60HRC
Blade Finish: Black Powder Coating
Handle: Stainless steel AUS-8A 58/60HRC
Blade Length: 68mm.
Blade thickness: 4.8mm.
Total length: 159mm.
Weight: 80g.
Scabbard: Thermoplastic, multi-position, with push-button retention system.
Package: Cardboard box with Spartan Blades Field Grade logos.
Note: Design by Iovito/Carey - The Field Grade series with Bronze color box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (company formed by Spartan Blades and Ka-Bar). In this series you can find the most iconic Spartan Blades designs offered at very aggressive and competitive prices.

Production type: Industrial

Country of Production: USA
Blade: Stainless steel 440C
Blade treatment: Black Traction Coating
Handle: Stainless steel 440C
Blade Length: 56mm.
Blade thickness: 4.45mm.
Total length: 158mm.
Weight: 85g.
Scabbard: polymer, with clip attachment
Packaging: cardboard box with Benchmade logos
Notes: Design by Greg Thompson

Intended use: Tactical / Utility

Type of production: Industrial
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Blade treatment: Black Coating
Handle: -
Blade length: 60mm.
Blade thickness: 3.1mm.
Total length: 130mm.
Weight: 32g.
Sheath: in ABS, for neck
Packaging: rigid pack with Ka-Bar logos
Note: -

Use: Neck / backup

Type of production: Industrial
Production Country: Sweden
Blade: Sandvik 12C27 stainless steel 57 / 58HRC
Handle: ABS with anti-slip rubber inserts
Blade length: 53 mm.
Blade thickness: 2 mm.
Overall length: 143 mm.
Weight: 80g.
Sheath: ABS

Use: Neck / backup

Type of production: Industrial
Production Country: Sweden
Blade: Sandvik 12C27 stainless steel 57 / 58HRC
Handle: ABS with anti-slip rubber inserts
Blade length: 53 mm.
Blade thickness: 2 mm.
Overall length: 143 mm.
Weight: 80g.
Sheath: ABS

Use: Neck / backup

Type of production: Industrial
Production Country: Sweden
Blade: Sandvik 12C27 stainless steel 57 / 58HRC
Handle: ABS with anti-slip rubber inserts
Blade length: 53 mm.
Blade thickness: 2 mm.
Overall length: 143 mm.
Weight: 80g.
Sheath: ABS

Use: Neck / backup

Type of production: Industrial
Production Country: Sweden
Blade: Sandvik 12C27 stainless steel 57 / 58HRC
Handle: ABS with anti-slip rubber inserts
Blade length: 53 mm.
Blade thickness: 2 mm.
Overall length: 143 mm.
Weight: 80g.
Sheath: ABS