Passion for knives

Intended use: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: CPM-S35VN stainless steel at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade length: 140mm.
Blade thickness: 5.58mm.
Total length: 276mm.
Balancing: on the lower guard branch
Weight: 335g.
Sheath: Nylon thigh, M.O.L.L.E.compatible
Notes: New 2018 version - Guarantee and authenticity certificates - Design by William W. Harsey

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

The particular situation created in the early years of the 1914/18 war, now mired in increasingly complex and protected trenches and fortifications, favored the formation of men who, little by little, specialized in the coup.

Our assault units, the Arditi, had their dagger. It was obtained from the pieces cut away by the long blades of the Vetterli 1870 bayonets, which in the narrow trenches, in the corridors, between the reticulars were only an obstacle. It was certainly a rustic weapon, of recovery, not too beautiful but certainly inexpensive, light, not cumbersome and in expert hands also effective.

Today, on the occasion of the centenary, we recall this important page of Italian military history with a limited celebratory series in only 100 numbered copies. This version has a satin blade and a walnut wood handle and is sold with a wooden box and leather sheath.

Intended use: Tactical / Military / Collection

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Satin
Handle: Walnut wood
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 270mm.
Weight: 224g.
Sheath: leather thigh-strap
Packaging: wooden box
Notes: Limited edition in 100 numbered copies - Edition to celebrate the hundred years of the Italian Arditi

Purpose of use: Collection / Utility

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose of use: Collection / Utility

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose of use: Collection / Utility

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 140mm.
Blade thickness: 5.58mm.
Total length: 276mm.
Balance: on the lower guard branch
Weight: 335g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Dark Earth PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Blade: Carbon Steel
Handle: horn
Blade length: 225 mm.
Blade Thickness: 10 mm.
Overall length: 350 mm.
Weight: without covers g. 375 - g with sheath. 504
Sheath: leather and wood, handmade
Notes: every knife and 'entirely handmade in Nepal and also includes two small knives.

Fox - Specwog Alfa Folder FX-310 - tactical knife

Intended use: Tactical / Utilities / Collection

Type of production: industrial
Blade: Stainless Steel Full Tang N690Co 58/60HRC
Treatment Blade: PVD
Production Blade: Italy
Handle: G10
Blade length: 95mm.
Blade Thickness: 4mm.
Overall length: 222mm.
Balancing: 2 cm back from the guard
Weight: 242g.
Clip: Steel
Notes: Specwog designed by Dean Rostohar

Kukri - World War II Gurkha

Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).

Lama: Acciaio al carbonio
Manicatura: Legno - ATTENZIONE, trattandosi di un prodotto artigianale la colorazione del manico può variare rispetto al modello fotografato
Lunghezza lama: 250 mm.
Spessore della lama: 11 mm.
Lunghezza totale: 405 mm.
Peso: -- g.
Fodero: in cuoio con trattamento camouflage e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.

Winner of "American year knife" to Blade Show 2007.

The Pacific, born of the fruitful collaboration between Reeve and HARSEY is the civilian version of the model Green Beret created to celebrate the 50th Anniversary of "the 1st Special Forces Group" department that has operated in Asia and the Pacific; the name of the knife derives the operating environment of the department.

Intended use: Fighter / Utility Light
Type of production: semi-industrial
Blade: full tang CPM-S35VN Steel 55 / 57HRC with GunKote finish
Country of production: Idaho - USA
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade Thickness: 5.8mm.
Overall length: 315mm.
Balance: on the lower part of the guard
Weight: 336g.
Sheath: Nylon, made in USA, with leg attacks and Type M.O.L.L.E.
Notes: Certificate of guarantee and authenticity

Kukri - Gurkha Army

Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).

Blade: Carbon steel
Manicure: black polished horn
Blade length: 265 mm.
Blade thickness: 10 mm.
Total length: 390 mm.
Weight: g.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.

Intended use: Collection / Tactical

Type of production: Semi-Industrial
Lama production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: MilSpec MIL-C-13924
Handle: Pressed leather and brass rings
Blade length: 175mm.
Blade thickness: 5mm.
Length closed: -
Total length: 291mm.
Thick when closed: -
Balancing: -
Weight: 398g.
Closing: -
Clip: -
Sheath: Leather, handmade
Packaging: Cardboard box with ExtremaRatio logos
Notes: Replica of the dagger distributed on the first course G.O.I. of 1952

Knife Withdrawn from Private Collection
Type: Previously Purchased
Condition: In good condition
Available in the market: No longer in production
Sharpening: Factory
Marks on the blade: Some marks
Marks on the handle: None
Box: NOT Present
Sheath: In kydex
Manuals, Certificates, and Warranties: NO
Checked and Certified by our internal laboratory
Intended Use: Tactical/Utility/Collection

Type of Production: Industrial
Blade: N690Co stainless steel 58/60HRC Full Tang
Blade Treatment: PVD
Blade Production: Italy
Handle: G10
Blade Length: 115mm.
Blade Thickness: 6mm.
Total Length: 255mm.
Balance: On the guard branch
Weight: 330g.
Sheath: Polymers with tech lock
Notes: Designed by Specwog Dean Rostohar

Kukri - Nepal Police

Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).

Lama: Acciaio al carbonio
Manicatura: legno
Lunghezza lama: 225 mm.
Spessore della lama: 10 mm.
Lunghezza totale: 355 mm.
Peso: senza fodero g. 524 - con fodero g. 666
Fodero: in cuoio e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.

Kukri - Operation Iraqi Freedom

Arma nazionale del Nepal e dei suoi guerrieri Gurkha, si distingue per la sua lama ricurva affilata nel latoconcavo e per lo spostamento del peso verso la punta che consente fendenti molto efficaci. L’impugnatura è diritta, senzaguardia. Caratteristico il ricasso (kauri) e il fodero di legno ricoperto di cuoioin cui sono contenuti anche due piccoli coltelli (karda e chakmak).

Lama: full tang in Acciaio al carbonio
Manicatura: Legno
Lunghezza lama: 275mm.
Spessore della lama: 10mm.
Lunghezza totale: 415mm.
Peso: 710g.
Fodero: in cuoio e legno, realizzato a mano
Note: ogni coltello e' interamente realizzato a mano in Nepal e comprende anche due piccoli coltelli.

Blade: Carbon steel
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: single engraved, black line
Manicure: Black horned horn engraved and polished
Finishes: Brass
Blade length: 275 mm.
Blade thickness: 10 mm.
Total length: 400 mm.
Karda: 110 mm.
Chakmak: 105 mm.
Weight: 505g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand

Kukri - World War II Gurkha

Nepal's national weapon and its Gurkha warriors are distinguished by their sharp curved blade in the lathe and the weight shift towards the tip that allows very effective gaiters. The grip is straight, no guard. Characteristic is the ricotta (kauri) and the leather sheath covered with two small knives (karda and chakmak).

Blade: Carbon steel
Handling: Wood - ATTENTION, since it is a handicraft product, the color of the handle may vary from the photographed model
Blade length: 250 mm.
Blade thickness: 11 mm.
Total length: 405 mm.
Sheath: leather and wood, handmade
Notes: Every knife is handmade in Nepal and also includes two small knives.

Blade: Carbon steel
Conformation: Flat blade
Kauri: Discovered
Aunlo-Bal: single black line engraved
Manicure: Black horn of polished and engraved buffalo
Finishes: Brass
Blade length: 260 mm.
Blade thickness: 9 mm.
Total length: 380 mm.
Karda: 120 mm.
Chakmak: 115 mm.
Weight: 490g.
Sheath: leather and wood
Notes: Original Nepalese knife made entirely by hand