Passion for knives

Extrema Ratio, on the occasion of the 10th anniversary of COM.FO.SE., presents a version in a limited series of only 70 pieces, "A.S.F.K. X BRIGATAE ANNIVERSARIUM LIMITED EDITION". 

A.S.F.K. (Assault Special Forces Knife) is the dagger dedicated to and acquired by the Army Special Forces Command. This model recalls the tradition of arditism and the bloody trench battles punctuated by assaults with a bladed weapon. A.S.F.K. is a trench knife reimagined with a modern twist.

A.S.F.K. X BRIGATAE ANNIVERSARIUM LIMITED EDITION comes in an IP67-certified watertight Polypropylene technical case with pressurization valve that is weatherproof, dustproof and shockproof. Inside is a metal plate with the numbering of the series limited to only 70 pieces.

Intended Use: Tactical/Collection

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Burnishing Geotech Camo
Handle: Forprene
Blade Length: 162mm.
Blade thickness: 6.3mm.
Overall length: 289mm.
Balance: backward
Weight: 413g.
Sheath: cordura, M.O.L.L.E. compatible.
Packaging: thermoplastic collectible case with logos 
Notes: limited and numbered edition made in only 70 pieces

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - year of production 2015
* Conditions: Like new
* Commercially available Yes
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: NO
* Sheath: In kydex
* Manuals, Certificates and Guarantees: YES
* Checked and Certified by our internal laboratory

Intended Use: Tactical/Military/Survival

Country of production: USA
Type of production: semi-artisanal
Blade: 1095 58HRC carbon steel
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Closed length: - mm.
Total length: 302mm.
Balance: in coincidence with the lower guard branch
Weight: 585g.
Sheath: in kydex, tactical, with double multi-position clip
Notes: Design by Tom Brown, used in the film The Hunted with Benicio Del Toro, each knife has a serial number on the blade.

Intended Use: Tactical/Military/Survival

Type of production: Made in the USA, semi-crafted
Blade: 1095 58HRC carbon steel - Camo
Handle: Micarta RMT (Rocky Mountain Tread)
Blade length: 160mm.
Blade thickness: 6mm.
Total length: 302mm.
Balance: in coincidence with the lower guard branch.
Weight: 595g.
Sheath: made of kydex, with double metal multi-position clip
Notes: Design by Tom Brown; used in the 2003 film "The Hunted / The Prey" starring Benicio Del Toro and Tommy Lee Jones

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued; Company no longer in operation as of 2017.
* Sharpening: Factory.
* Marks on blade: Normal marks, found on all Strider models with Tiger Stripe finish.
* Marks on handle: None
* Box: Originally sold unboxed
* Scabbard: Original, in Khaki-colored Cordura, by Eagle USA.
* Manuals, Certificates and Warranties:Originally sold without certificates or warranties.
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Collection

Type of manufacture:Midtech
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Finish: Tiger Stripe
Handle: Black G-10 with GG (Gunner Grip) pattern
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 298mm.
Weight: 353g.
Sheath: Khaki, cordura, by Eagle USA
Packaging: -
Notes: 2010 specimen in very good condition - Shows small scuff marks on the Tiger Stripe finish, which is common with any Strider model made with this matte blade finish - Strider knives have always been offered by the company without any box, packaging, manual or certificate - This historic company ceased operations in 2017, after a 25-year career - Mick Strider, the company's previous founding partner, is still in business and dedicated solely to making custom knives.

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, model dating back to the 90s
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: without box
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory

Intended use: Collection / Vintage

Type of production: artisanal
Country of production: Germany
Blade: stainless steel
Blade finish: satin finish
Handle: ABS with metal parts
Blade length: 80mm.
Blade thickness: 2.5mm.
Total length: 185mm.
Balancing: backward
Weight: 130g.
Sheath: -
Packaging: -
Notes: Vintage 90s knife

The Buck 124 was originally designed in 1966 as a dive combat knife called the Nemo. The model then went into production in 1967 and was offered with either a dive sheath (NEMO) or a leather sheath (FRONTIERSMAN). The knife was the same and has remained so to this day.

In the 1960s about 300 examples were produced and they had black phenolic handles with white Teflon spacers. Then in the 1970s it had a fluctuating production, with very poor sales numbers, until in '73 it was offered with a "Buckarta" (Micarta) handle and began to find favor with the public, with over 10000 examples sold until the early 1980s. Until 1983 model production remained high, and in 1984 a version of the FRONTIERSMAN with a Pakkawood handle was introduced; the 1984 version did not have the patent logos engraved, the 1985 version had the patent engravings, and from 1986 the knife began to have the production date engraved on the blade.

Therefore, our proposed model is from 1984.

Knife withdrawn from private collection - Classic Buck model dating from 1984, first series with wooden handle - Overall in very good condition, with no particular noticeable marks, with a few small scratches on aluminum guard and pommel - Scabbard in excellent condition - Original factory sharpening, but underperforming - Lacking box and certificates - Checked and certified by our in-house laboratory.

Intended Use: Hunting / Utility / Multirole / Collection

Type of production: Industrial
Country of manufacture: USA
Blade: full tang, 425M stainless steel
Blade finish: satin-finished
Handle: Pakkawood
Blade length: 159mm.
Blade thickness: 4.5mm.
Total length: 300mm.
Balance: backward
Weight: 377g.
Sheath: black leather
Packaging: absent
Notes: knife withdrawn from private collection, 1984 specimen, overall in very good condition

Iconic knife produced by Puma and dating back to the late 1980s, characterized by a then very modern line and a very advanced steel for the time (154CM).  Knife withdrawn from private collection - Overall in very good condition - Never used, never sharpened, still with factory sharpening - A few small marks on the right side handle, in concomitance with the sheath that goes to hook the knife through a pin that tends to irreparably rub the handle itself - Supplied with original wooden case and leather sheath - Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Collection / Vintage / Tactical

Type of production: handcrafted
Country of manufacture: Germany
Blade: stainless steel 154CM
Blade finish: satin-finished
Handle: Integral, stainless steel and Micarta
Blade length: 160mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 285g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - Limited edition of only 500 pieces, numbered on the blade, specimen 170 of 550 - Knife withdrawn from private collection globally in excellent condition

Tops - Tom Brown - The Tracker

Intended use: Tactical / Military / Survival

Type of production: semi industrial
Blade: 1095 58HRC carbon steel - Camo
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Closed length: - mm.
Total length: 302mm.
Balancing: coinciding with the lower guard branch
Weight: 595g.
Closure: -
Clip: -
Sheath: in kydex, tactical with double multi-position clip
Notes: Design by Tom Brown, used in the film The Hunted with Benicio Del Toro, entirely handmade in the USA, each knife is numbered and accompanied by a certificate of guarantee and authenticity.

Japanese steel blends with Italian excellence

For this 2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Col Moschin model: for this First Production Run a run of 11 pieces was produced, numbered from 1 to 11.

Special purpose cutting knife, specially developed for the 9th Col Moschin Parachute Assault Regiment, elite unit of the Folgore brigade.

Use: tactical, sports, hiking, collection

Blade: integral, in laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Handle: forprene
Blade length: 160mm.
Blade thickness: 6.5mm.
Total length: 290mm.
Balance: set back to 0.5cm. from the guard branch
Weight: 265g.
Sheath: modular tactical, from thigh or belt, in Nylon
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - being the cutting edge in carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

As in the ancient Japanese Samurai swords.

Rolled steel - imported into Italy by Collini Steel directly from Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel
Invia commenti
Cronologia
Salvate
Community

Intended use: Outdoor / Tactical

Type of production: Semi-Industrial
Country of production: USA
Blade: A2 steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 315mm.
Balancing: advanced
Weight: 480g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -
Send feedback
History
Saved

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -

Intended use: Hiking / Hunting

Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -

Intended use: hard utility / survival

Type of production: industrial seeds
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade finish: stone washed
Handle: micarta
Blade length: 147mm.
Blade thickness: 5mm.
Total length: 273mm.
Balancing: coinciding with the lower guard branch
Weight: 408g.
Sheath: in leather
Notes: Design by Tom Brown - used in the film The Hunted with Benicio Del Toro - Limited edition edition to celebrate the 20 years of production of the model - Each knife is numbered and accompanied by a certificate of guarantee and authenticity

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

BACK SIGNED

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

BACK SIGNED

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

Use: Outdoor / Sports

Type of production: Industrial
Production Country: Taiwan
Blade: full tang, steel D2
Blade treatment: stonewashed
Handle: G10
Blade length: 157mm.
Blade thickness: 5mm.
Overall length: 280mm.
Weight: 293g.
Sheath: Kydex with coupling type Tek-Lok
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jesper Voxnæs

Commissioned and officially adopted in 2002 by the famous 9th Regiment. Raiders "Col Moschin", this model expresses the quintessence of pure combat knife.

Inspired by daggers with asymmetric blade and straight handle but oriented Arditi, from which the Regiment traces its vestiges, it was reworked in a modern way.
The center of gravity is strong backlog, particularly the tip piercing. And 'light, handy and intuitive. Each new intruder receives one, and each new intruder is trained to use it.

All knives of this series have straight handles KRATON from ergonomic design whose shape and size favors besides a solid grip the rapid change of straight handle (Sabre Grip) to upside (Reverse Grip). An Allen screw stainless steel allows the campaign from disassembly for maintenance and lubrication of the through shank increasing the operational life of the knife.

The sheath and 'suitable all'aviolancio and underwater operations and amphibious and is' applicable to the belt or the accoutrements.

Intended Use: Collection / Tactical / Military

Production Country: Italy
Blade: N690Co 58HRC stainless steel
Surface treatment: Black PVD
Handle: Removable Kraton
Blade length: 160mm.
Blade Thickness: 6.3mm.
Overall length: 290mm.
Balancing: backward, 1 cm. the branch of the lower guard
Weight: 265g.
Sheath: tactical modular, from thigh or belt, Nylon
Notes: Limited Edition with exhibitor in Plexyglass

Warning: as these are handmade products, there may be variations with respect to the following and displayed in the picture below.

Blade: Carbon steel, with incisions
Conformation: Dui Chirra
Kauri: Discovered
Aunlo-Bal: -
Handle: wood engraved
Finishes: Brass
Blade length: 160 mm.
Blade thickness: 8 mm.
Overall length: 280 mm.
Karda: 55 mm.
Chakmak: 55 mm.
Weight: 224g. (308g inclusive sheath)
Sheath: engraved wood and brass
Notes: Original Nepalese knife entirely handmade

Designed by David Repossini, instructor of Krav-Maga with decades of experience in martial arts and combat systems in the military, was founded with the purpose of joining a blade with a survival for the fight, trying to be more effective than high knives already in business. The result is the model Outlander, a tool that can be picked up and handled in six major ways and making it adaptable to different contexts.

It is effective both for heavy work, such as cutting of a branch, is for precision work, such as making out to light the campfire. In combattimentoè well balanced, maneggevle and forms that make it effective is to strike or engage, and to achieve the most sensitive parts in extension.

The variety of grips allows feasible to do many different techniques of combat systems also bringing together elements typical of the kukri and karambit.

Intended Use: Combat Survival

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Stonewashed
Handle: G10
Blade length: 165mm.
Blade thickness: 6mm.
Overall length: 295mm.
Balancing: Set back to 1.5cm. the branch of the guard
Weight: 466g.
Sheath: Nylon with leather loop
Packaging: Cardboard Box
Notes: designed by David Repossini

Introducing the new Model 451 full-tang fixed blade field knife, designed and made by Freeman Outdoor Gear LLC.

The CerakoteTM coated LSS PGK steel drop point blade features a main flat grind with a thick secondary swedge for maximum toughness and piercing ability.

The exposed pommel with jimping acts as a flat hammering surface and includes a lanyard attachment hole sized for the included 550 cord lanyard. 

The blade is heat treated and double tempered to a hardness of 59-61 Rc and the cutting edge is ground razor sharp at a 40 degree included angle (20 degrees per side).

The handle scales are CNC machined from tough G-10 or optional Canvas Micarta with milled grooves for a secure and comfortable grip. The handle shape provides an ergonomic and balanced grip for use in multiple positions. Enhanced parrot's beak pommel and lower front guard aid in blade retention during chopping. Stainless steel hardware locks all the components into place.

Included is a Spec-Ops Brand fabric sheath with thermoformed puncture-proof kydex lining.

This is a premium 100% US-made field knife designed to excel in multiple cutting chores under the most demanding conditions.

Specifications:

Knife Name:  Model 451 Chopper

Designer:  Jeff Freeman

Overall Length: 11.8"

Blade Length: 6.5”

Blade Thickness:  3/16”

Blade Steel:  LSS PGK

 Blade Hardness:  59-61 HRC

Blade Style:  Full-Tang Fixed Blade, Drop Point

Coating: CerakoteTM Ceramic Firearms Coating

Handle Material: Machined G-10 or Canvas Micarta

Sheath Material: Spec-Ops Brand Basic Modular Sheath

Knife Weight: 0.66 LBS

Note from Jeff: Before joining the US Army, I worked for 5 seasons as a wildland firefighter based out of Sweet Home, Oregon. While there, I battled scores of wildfires throughout Oregon and the Western United States with a very skilled, hard-working and dedicated group of young men and women. My crew's radio dispatch call sign was "451". 

I've named this knife family the "Model 451" in honor of those crew mates past and present that put it all on the line for the protection of our wildlands.

Use: Heavy Utility / Hiking

Type of production: industry
Blade: full tang, stainless steel ACX-380 (Krupp 1.4116) to 58HRC
Treatment Blade: satin
Production Lama: spain
Handle: Canvas Micarta
Blade length: 160mm.
Blade Thickness: 5mm.
Overall length: 280mm.
Balance: the branch guard
Weight: 360g.
Sheath: Brown leather
Packaging: cardboard box with logos Azero Spain

Takeshi Saji - Bat 150 - Knife Craft

Intended Use: Collection / Sports

Type of production: Artisan
Production Lama: Japan
Blade: Forged by hand, damask laminate with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: black micarta
Blade length: 160mm.
Blade thickness: 6mm.
Length closed: -
Overall length: 290mm.
Thick when closed: -
Balancing: -
Weight: 406g.
Closing: -
Clip: -
Sheath: Black Leather
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi Saji

Originally produced in 1967 as a combat model, and also used during the Vietnam conflict, the model 124 becomes discontinuous since 1997 only to be revived by Buck in the Heritage Collection 2012/2013 in a limited edition of only 700 copies. It is distinguished by the full tang blade and the handle in black linen micarta.

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Full tang, stainless steel 420HC
Treatment Blade: -
Handle: Micarta
Blade length: 159mm.
Blade thickness: 4.5mm.
Length closed: -
Overall length: 300mm.
Thick when closed: -
Balancing: -
Weight: 377g.
Closure: -
Clip: -
Sheath: Black Leather
Packaging: Cardboard box with logos Buck
Notes: Limited Edition Heritage Collection 2012/2013 with a print run of only 700 copies

Destination: Military/Tactic/Collection

Type of manufacturing: industrial
Blade: W 1.4116 inox
Blade Treatment: IDROGLIDER GOLD® Black
Made in: Italy
Handle: Nylon reinforced with fiber glass, PP and TPE
Blade Length: 160mm.
Blade Thickness: 4,5mm.
Total Length: 290mm.
Balancing: on knife's guard
Weight: 288g. (with sheath 534g.)
Sheath: cordura with thigh band
Note: -

The design of this military knife, sponsored by COFS (Special Forces Operative Command) in the person of General Bertolini, had already been suggested by some collectors of white weapons of the time. The restyling of the famous "paratrooper assault dagger mod. 1939 ", constitutes an important piece of Italian military history.

The knife, while borrowing the line, the structure and the proportions from the original, has been strengthened, enriched with functional modifications and made with materials with modern military specifications. The result of these few modifications is an extremely functional and effective dagger. The sheath is ankle-shaped to be worn as Italian paratroopers usually wear a bayonet.

The 39-09 COMBAT version is the compact version with 160mm blade and side sheath.

Intended use: Tactical

Type of production: Industrial
Country of production: Italy
Blade: in N690Co 58HRC stainless steel
Blade treatment: MilSpec MIL-C-13924
Handle: Forprene
Blade length: 160mm.
Blade thickness: 6.3mm.
Length closed: -
Total length: 284mm.
Thick when closed: -
Balancing: -
Weight: 305g.
Sheath: Nylon
Packaging: Cardboard box with ExtremaRatio logos
Note: -

Glock - 78 Field Knife - Sand - knife

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

Glock - 78 Field Knife - Black - knife

The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.

Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic Polymers

Sog - Bowie II - S1T-L - knife

Intended Use: sports / tactical / hunting

Type of production: industrial
Blade: AUS-8 stainless steel
Treatment Blade: nitriding titanium
Handle material: leather rings
Blade length: 160mm.
Blade thickness: 6mm.
Length closed: -
Total length: 278mm.
Balance: backward, at 1 cm from the branch guard
Weight: 298g.
Sheath: tactical leather
Notes: -

Sog - Trident II - S2B - knife

Intended Use: sports / tactical / hunting

Type of production: industrial
Blade: AUS-8 stainless steel
Handle material: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Total length: 278mm.
Balance: backward, at 1 cm from the branch guard
Weight: 312g.
Sheath: tactical leather
Notes: -

Intended use: Tactical / Military / Survival

Type of production: industrial seeds
Blade: 1095 58HRC carbon steel
Handle: Micarta
Blade length: 160mm.
Blade thickness: 6mm.
Length closed: - mm.
Total length: 302mm.
Balancing: coinciding with the lower guard branch
Weight: 585g.
Closure: -
Clip: -
Sheath: kydex, tactical with double multiposition clips
Notes: Design by Tom Brown, used in the movie The Hunted with Benicio Del Toro, entirely handmade in the USA, each knife is numbered and accompanied by a certificate of guarantee and authenticity.