Passion for knives
-
Fox - Predator I Tanto - Black Idroglider FX-G2B - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Black Idroglider
Handle: Forprene
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 295g.
Sheath: cordura, with leg strap
Packaging: cardboard box with Fox logos
Note: -FX-G2B -
Fox - FX-G3B - Predator I - Large Clip Point Black Teflon - coltello
Destinazione d'uso: Sportivo/Tattico/Militare
Lama: in acciaio inox N690Co 58/60HRC
Manicatura: smontabile in Forprene
Lunghezza lama: 180mm.
Spessore della lama: 6mm.
Lunghezza chiuso: - mm.
Lunghezza totale: 300mm.
Bilanciatura: -
Peso: 290g.
Chiusura: -
Clip: -
Fodero: cordura e gomma balistica a fissaggio cosciale con fodero supplementare per un coltello chiudibile
Note: -5717 -
Fox - Spartan Defender Combat Knife - SF-CC03 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife from 2014 previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Out of production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Slight superficial rub marks on matte finish.
* Marks on handle: Small superficial marks on pommel and guard.
* Box: Not present
* Scabbard: Present, original, fiberglass, nylon and cordura sheath with stainless steel thread cutter.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory
Knife launched on the market in 2014 by Fox Knives, civilian version of their Spartan Defender Military Bayonet. It has the distinction of having a trapezoidal polymer handle with the blade offset upward from the user's grip. Model now discontinued and replaced by the "Spartan 2 Leonidas" currently in production, decidedly more canonical in appearance, conformation and materials.
Intended Use: Collection / All Round Utility / Tactical
Country of Production: Italy
Blade: Stainless Steel N690Co 59/60HRC with MILSPEC MIL-C-13924 treatment
Handle: NATO Black 9011 forprene and 316L stainless steel with MILSPEC MIL-C-13927 treatment
Blade length: 185mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: On the lower guard branch
Weight: 390g.
Sheath: made of high-strength fiberglass with Cordura and ballistic Nylon exterior. The main sheath is equipped with a wire cutter plate.
Notes: knife from 2014 previously purchased and from private collection - discontinued itemSF-CC03-AP -
Buck - Talon - Black Tactical Machete - 0808BKX - Knife
Intended use: Tactical / Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang, in 5160 carbon steel
Blade finish: Cerakote
Handle: Micarta
Blade length: 254mm.
Total length: 406mm.
Balancing: Advanced
Weight: 655g.
Sheath: Nylon and Polyester
Packaging: Cardboard box with Buck logos
Note: -BU0808BKX -
Hardcore Hardware Australia - MFK-04 GEN II - Desert - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Australia
Blade: full tang in steel D2 at 58 / 60HRC
Blade treatment: Teflon coating
Handle: G10
Blade length: 130mm.
Blade thickness: 6mm.
Total length: 267mm.
Balancing: Advanced
Weight: 319g.
Sheath: in Kydex, with Tek-Lok attacks
Packaging: cardboard box
Note: -HH-MFK04D€220.49Out of stock -
Hardcore Hardware Australia - MFK-02 GEN II - Desert - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Australia
Blade: full tang in steel D2 at 58 / 60HRC
Blade treatment: Teflon coating
Handle: G10
Blade length: 128mm.
Blade thickness: 6mm.
Total length: 265mm.
Balancing: Advanced
Weight: 347g.
Sheath: in Kydex, with Tek-Lok attacks
Packaging: cardboard box
Note: -HH-MFK02D€220.49Out of stock -
Chris Reeve - Pacific by W. Harsey - black canvas micarta - knife
Winner of "American year knife" to Blade Show 2007.
The Pacific, born of the fruitful collaboration between Reeve and HARSEY is the civilian version of the model Green Beret created to celebrate the 50th Anniversary of "the 1st Special Forces Group" department that has operated in Asia and the Pacific; the name of the knife derives the operating environment of the department.
Intended use: Fighter / Utility Light
Type of production: semi-industrial
Blade: full tang CPM-S35VN Steel 55 / 57HRC with GunKote finish
Country of production: Idaho - USA
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade Thickness: 5.8mm.
Overall length: 315mm.
Balance: on the lower part of the guard
Weight: 336g.
Sheath: Nylon, made in USA, with leg attacks and Type M.O.L.L.E.
Notes: Certificate of guarantee and authenticity0026 -
Extremaratio - Fulcrum II D Folder Desert Warfare - Tanto - knife
Intended use: tactical / military / backup
Blade: Stainless Steel N690Co 58HRC Desert Warfare
Manicure: 4.5mm Thickness Anticorodal
Blade Length: 95mm.
Blade thickness: 6mm.
Closed length: 127
Total length: 220mm.
Balance: -
Weight: 200g.
Closing: Back Lock
Clip: Removable and reversible in stainless steel
Sheath: -
Notes: safety mechanism both in opening and closing4146D -
Extremaratio - Fulcrum II T Black - Tanto - knife
Directly derived from military specifications, this fold has been developed to replace a fixed blade in use.
To achieve this result, very strong materials, high thicknesses and a solid and safe opening and closing system were used: the back lock.
The knife is equipped with a manual safety device which confers maximum safety in use and reduces the risk of accidental closure in manieradrastica.
The safety device, if inserted in closing, prevents the knife from being turned against itself in the case of subtraction.Materials and workmanship:
All parts of the knife are machined from high-precision CNC machines, while assembly, adjustment and sharpening are carried out by hand.
The blade is made of cobalt N690 stainless steel, a steel with very high resistance to mechanical stress, cutting capacity, thread strength and corrosion resistance. The grinding is flat and the hardness is 58HRC.
The grips of the handle are in Anticorodal, an aluminum alega with high resistance to mechanical stress and oxidation.
The tang, in hardened N690, is an effective emergency crystals. All screws, pins and clips are in burnished stainless steel. The blade, the lever and the shank are covered with Testudo treatment, very resistant to abrasion and oxidation. The cheeks are black anodized.Intended use: tactical / military / backup
Blade: stainless steel N690Co 58HRC
Handle: Anticorodal thickness 4.5mm
Blade length: 95mm.
Blade thickness: 6mm.
Length closed: 127
Total length: 220mm.
Weight: 200g.
Closure: Back Lock
Clip: removable and reversible in stainless steel
Notes: safety mechanism both in opening and closing4146R -
ExtremaRatio - MPC Tactical knife - Knife
Directly derived from military specifications, this folding was developed to replace a fixed blade in use.
To achieve this, very strong materials, high thicknesses and a solid and safe diaper opening / closing system were used.
The knife is equipped with a manual safety device that confers maximum safety in use and reduces the risk of accidental closures in a manual manner.
The safety device, if inserted in the closure, prevents the operators or police officers from turning the knife against them in the event of theft.Materials and processes:
All the parts of the knife are machined from solid by high precision numerical control machines while assembly, adjustment and sharpening are done by hand.
The blade is made of N690 cobalt stainless steel, a steel with very high resistance to mechanical stress, cutting capacity, wire hold and corrosion resistance. The grinding is flat and the hardness is 58HRC.
The handle grips are made of Anticorodal, an aluminum alloy with high resistance to mechanical stress and oxidation.
The shank, in tempered N690, is an effective emergency crystal breaker. All the screws, pins and laclipes are in burnished stainless steel. The blade, the lever and the shank are covered with Testudo treatment, very resistant to abrasion and oxidation. The handles are black anodized.Model: M.P.C.
Destination: General use
Lung. Total: 260 mm
Blade: 115 mm
Weight: 245 gr
Thick. Blade: 6 mm
Mat. Blade: N690 cobalt stainless steel
Handle: Anticorodal4147N -
Fox - FX-G2DC - The Predator - Desert Camo Tanto - Knife
Fox - FX-G2DC - The Predator - Desert Camo Tanto - Knife
Intended Use: Sport / Tactical / Military
Blade: Stainless steel N690Co 58/60HRC
Handle: removable Forprene
Blade length: 180mm.
Blade thickness: 6mm.
Closed Length: - mm.
Total length: 295mm.
Balance: -
Weight: 298g.
Closing: -
Clip: -
Sheath: Cordura and ballistic rubber sheath with leg attachment to extra for a folding knife
WARNING: the color of the sheath varies depending on the availability / choice of production company: [email protected] or 0331-632686 for additional info.
Notes: -5718 -
Fox - FX-P1B - Predator I Tanto - Black Teflon - knife
Intended use: Tactical / Military
Country of Production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade Finish: Teflon
Handle: removable in Forprene
Blade length: 145mm.
Blade thickness: 6mm.
Total length: 265mm.
Weight: 230g.
Sheath: cordura and ballistic rubber with thigh fastening
Note: -5715 -
Fox - O.M.G. Kaimano Combat Diving - OMG-1 - coltello da sub
Destinazione d'uso: sub/tattico/rescue
Tipo di produzione: industriale
Produzione Lama: Italia
Lama: in acciaio inox N690Co
Trattamento Lama: DLC
Manicatura: Forprene
Lunghezza lama: 140mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 300mm.
Bilanciatura: arretrata, a 3cm dal ramo di guardia inferiore
Peso: 180g.
Chiusura: -
Clip: -
Fodero: tattico in nylon con attacchi M.O.L.L.E.
Note:5784 -
Fox - Stealth Tanto - Titanio e Carbonio - FX-SCT01B - coltello
Destinazione d'uso: tattico/militare
Tipo di produzione: industriale
Lama: Titanio Beta 45HRC antiriflesso e Fibra di Carbonio
Produzione Lama: Italia
Manicatura: smontabile in Foprprene
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 296mm.
Bilanciatura: sul ramo di guardia
Peso: 158g.
Chiusura: -
Clip: -
Fodero: Kydex con attacco multiposizione in polimeri
Note: attacco multiposizione in acciaio sostituibile compreso nella confezione5758 -
Fox - Stealth Utility - Titanio e Carbonio - FX-SCT02B - coltello
Destinazione d'uso: tattico/militare
Tipo di produzione: industriale
Lama: Titanio Beta 45HRC antiriflesso e Fibra di Carbonio
Produzione Lama: Italia
Manicatura: smontabile in Foprprene
Lunghezza lama: 135mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 272mm.
Bilanciatura: arretrata, a 2cm. dal ramo di guardia
Peso: 136g.
Chiusura: -
Clip: -
Fodero: Kydex con attacco multiposizione in polimeri
Note: attacco multiposizione in acciaio sostituibile compreso nella confezione5759 -
Zero Tolerance - Strider Bayonet Fixed Blade - ZT-9 - coltello
Questo coltello è nato dalla collaborazione tra Zero Tolerance e Strider Knife.
Destinazione d'uso: Tattico/Collezione
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: full tang in acciaio CPM3V
Trattamento Lama: stone washed finish
Manicatura: G-10 textured G10 ranger green
Lunghezza lama: 190mm.
Spessore lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 310mm.
Spessore da chiuso: -
Bilanciatura: arretrata ad 1.0cm dalla guardia
Peso: 560g.
Chiusura: -
Clip: -
Fodero: Nylon e Kydex
Confezione: scatola in cartone con loghi Zero Tolerance
Note: Coltello a filo singolo di libra vendita e di libera detenzione, con guardia standard che non si adatta a nessuna canna o frangifiamma specifico di arma da fuoco.4368