Passion for knives

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new, never taken out of its packaging.
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Coltelleria Collini exclusive - Available in only 33 numbered examples on blade and box

Intended use: collection / EDC / CQD

Type of production: industrial, limited
Blade: Japanese laminated stainless steel (San Mai) with cryogenically hardened 61.5HRC CoS cutting edge; with double concave shank in the strong of the blade
Blade treatment: satin finish
Country of manufacture: Italy
Handle: made of Titanium, machined from solid, with integral Frame Lock system with removable casement and safety made of stainless steel
Blade length: 75mm.
Blade thickness: 6.3mm.
Total length: 180mm.
Weight: 186g.
Clip: stainless steel, reversible, deep pocket type and with tip up port
Notes: tapered Skull Crasher engaged in the tang - Limited and numbered edition of only 33 pieces serialized on the blade and box
Box: cardboard, numbered, with ExtremaRatio and Coltelleria Collini logos

WAKI XXV ANNIVERSARIUM LIMITED EDITION is a limited series version of only 150 pieces that keeps all the features of the famous Waki model intact.

This product is an elaboration of the Japanese Wakizashi sword, a typical blade 30 to 60 centimeters long, which the Samurai always carried in contact with the body, where the Katana was carried exclusively in battle.

The blade has the classic Japanese Tanto profile and is made of Böhler N690 steel with heat treatments that raise its hardness to 58 HRC for the best combination of edge hold and strength. The blade, with flat rounding, features a precious satin finish.

The handle, in black coloring, is made of Forprene while The black-colored Cordura sheath is equipped with a MOLLE system that ensures safe carrying of the razor-sharp blade by protecting it from shocks that could reduce its efficiency.

WAKI XXV ANNIVERSARIUM LIMITED EDITION comes in an IP67-certified watertight Polypropylene technical case with pressurization valve that is weather, dust and shock resistant. Also inside is a metal plaque with the numbering of the limited series of 150 and a commemorative coin of the twenty-fifth Extrema Ratio anniversary.

Intended Use: Collection / Tactical / Machete

Production type: Industrial
Country of manufacture: Italy
Blade: N690Co stainless steel at 58HRC
Blade Treatment: Satin finish
Handle: Forprene
Blade Length: 297mm.
Blade thickness: 6.5mm. tapering to 4mm from the handle.
Total length: 456mm.
Weight: 384g.
Sheath: cordura, compatible with M.O.L.L.E. systems.
Packaging: polypropylene case with numbered metal plaque and commemorative coin with Extrema Ratio logos
Notes: Limited and numbered edition made in only 150 pieces

Exclusive knife in entirely handcrafted "Comix" coloration, part of a batch of products made especially for the Atlanta 2023 Blade Show.

"Comix" type coloring refers to a coloring technique used in comic books and illustrations that is inspired by the style of traditional comic books. This style of coloring often features flat, bright colors with sharp edges between different shades. Some hallmarks of comix-type coloring include:

Flat backgrounds: Areas of solid color are applied without shading or complex tonal gradations. This gives a more "clean" and stylized look to the image.

Sharp edges: The borders between different shades of color are often marked by black or dark contour lines. These lines define the boundaries of the various elements in the image and accentuate the contrast between the different colors.

Bright colors: In comix-type coloring, bright, saturated colors are often used to create visual impact. These colors can be used to distinguish characters or to emphasize certain elements of the image.

Simplified shading: Although comix-type coloring may include shadows and highlights to add depth, these are often simplified compared to other coloring techniques. Shadows may be represented by areas of darker color or simple lines or brush strokes.

Graphic effects: Some elements of graphic effects, such as dots or speed lines, can be used to accentuate action or movement in illustrations.




Production Type: Handcrafted
Blade Production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: "Comix" coloring, entirely handmade and hand-painted
Handle: Micarta
Blade length: 240mm.
Blade thickness: 6.5mm.
Total length: 403mm.
Balance: backward
Weight: 740g.
Sheath: made of thermoformed kydex
Packaging: unpacked - supplied with certificate of originality and Wander Tactical warranty
Notes: This knife is part of an exclusive batch of knives made entirely by hand and customized one by one designed for the Atlanta 2023 Blade Show.

Reventon knife, no longer in production for years and limited to 2000 pieces, withdrawn from a private collection globally in excellent condition - Complete with everything, plastic box and certificates. Checked and certified by our internal laboratory.

Extrema Ratio was chosen by Automobili Lamborghini to produce the Reventón Folder, an emergency knife, belt cutter and glass breaker, designed by the Lamborghini Style Center, which becomes the official equipment of each of the 20 Reventón produced, the most exclusive supercar of the House of Bull.

The "Reventón Folder" is an accessory of the highest functional and aesthetic level, clearly in line with the philosophy of the car built with concepts and technologies directly borrowed from the most advanced aviation industry.

The knife is produced in a limited edition of 2,000 pieces, the first twenty equip the Reventón, the other 1980 pieces will be available for collectors.

Intended use: Collection

Type of production: Industrial
Production Lama: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Testudo
Handle: Anticorodal
Blade length: 120mm.
Blade thickness: 6.3mm.
Closed length: 155mm.
Total length: 260mm.
Thick when closed: 21mm.
Balancing: -
Weight: 235g.
Closure: Back Lock with safety catch
Clip: -
Sheath: -
Packaging: plastic box with Lamborghini and Reventon logos
Notes: Specimen number 297 out of 2000, unique piece at our disposal

The particular situation created in the early years of the 1914/18 war, now mired in increasingly complex and protected trenches and fortifications, favored the formation of men who, little by little, specialized in the coup.

Our assault units, the Arditi, had their dagger. It was obtained from the pieces cut away by the long blades of the Vetterli 1870 bayonets, which in the narrow trenches, in the corridors, between the reticulars were only an obstacle. It was certainly a rustic weapon, of recovery, not too beautiful but certainly inexpensive, light, not cumbersome and in expert hands also effective.

Today, on the occasion of the centenary, we recall this important page of Italian military history with a limited celebratory series in only 100 numbered copies. This version has a satin blade and a walnut wood handle and is sold with a wooden box and leather sheath.

Intended use: Tactical / Military / Collection

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Satin
Handle: Walnut wood
Blade length: 167mm.
Blade thickness: 6.3mm.
Total length: 270mm.
Weight: 224g.
Sheath: leather thigh-strap
Packaging: wooden box
Notes: Limited edition in 100 numbered copies - Edition to celebrate the hundred years of the Italian Arditi

Purpose: Collection / Sportsman

Type of production: Industrial
Country of Origin: Taiwan
Blade: 440C steel
Blade treatment: satin finish
Handle: rayskin and cotton
Blade Length: 235mm.
Blade thickness: 6.5mm.
Total Length: 375mm.
Weight: 527g.
Sheath: in leather
Packing: gift box with guarantee certificate and microfibre cloth for cleaning
Notes: Limited edition number edition in 1999 - Design by Wally Hayes

Intended Use: Collection / Sports
Industrial production
Production Country: Taiwan
Blade: 440C
Blade treatment: satin two-tones
Handle: walnut wood with mosaic pin
Blade length: 227mm.
Blade thickness: 6.5mm.
Overall length: 362mm.
Weight: 472G.
Sheath: Leather
Packaging: gift box with warranty card and microfiber cloth for cleaning
Notes: Edition in numbered and limited edition - Design by Anders Högström

A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces

Intended Use: collection / EDC / CQD

Type of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria Collini

A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces

Intended Use: collection / EDC / CQD

Type of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria Collini

A Coltelleria Collini Exclusive - Limited edition, available in only 33 serialized pieces

Intended Use: collection / EDC / CQD

Type of production: Industrial, Limited
Blade: Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic quenching; with fuller double concave in the strong blade
Blade treatment: Satin finish
Production Country: Italy
Handle: Titanium, Billet, with full Frame Lock locking system with sash and secure removable made of stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 186g.
Clips: stainless steel, reversible type deep pocket and port tip up
Notes: Skull Crasher tapered shank engaged in - Edition limited and numbered edition in only 33 serialized pieces on the blade and box
Box: cardboard, numbered, with ExtremaRatio logos and Coltelleria Collini

Collectors Edition with:

* Box of ABS branded laser
* Tactical Kydex scabbard and leather, handcrafted
* Attack Tek-Lok
* Lanyard black paracord with custom anodized titanium wire stop with slogans and Extrema Ratio Knives Collini

Only two specimens at our disposal: Number 4 of 100 and number 9 of 100

This is a Collini Cutlery Exclusive - Only available in 100 serialized pieces

Intended Use: collection / EDC / CQD
Type of production: industrial, Limited
Blade: N690 stainless steel in 58HRC with hollow ground fuller
Blade Treatment: Black Testudo
Blade Production: Italy
Handle: Titanium machined from solid.
Closing system: Frame Lock with swing and safe removable stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 190g.
Clips: stainless steel, reversible, deep pocket, tip up
Notes: Conical Skull Crasher engaged in the shank - Limited and serialized edition in only 100 pieces
Box: Cardboard, serialized, with Extrema Ratio and Coltelleria Collini logos

Commissioned and officially adopted in 2002 by the famous 9th Regiment. Raiders "Col Moschin", this model expresses the quintessence of pure combat knife.

Inspired by daggers with asymmetric blade and straight handle but oriented Arditi, from which the Regiment traces its vestiges, it was reworked in a modern way.
The center of gravity is strong backlog, particularly the tip piercing. And 'light, handy and intuitive. Each new intruder receives one, and each new intruder is trained to use it.

All knives of this series have straight handles KRATON from ergonomic design whose shape and size favors besides a solid grip the rapid change of straight handle (Sabre Grip) to upside (Reverse Grip). An Allen screw stainless steel allows the campaign from disassembly for maintenance and lubrication of the through shank increasing the operational life of the knife.

The sheath and 'suitable all'aviolancio and underwater operations and amphibious and is' applicable to the belt or the accoutrements.

Intended Use: Collection / Tactical / Military

Production Country: Italy
Blade: N690Co 58HRC stainless steel
Surface treatment: Black PVD
Handle: Removable Kraton
Blade length: 160mm.
Blade Thickness: 6.3mm.
Overall length: 290mm.
Balancing: backward, 1 cm. the branch of the lower guard
Weight: 265g.
Sheath: tactical modular, from thigh or belt, Nylon
Notes: Limited Edition with exhibitor in Plexyglass

** SOLD OUT - OUT OF STOCK AND OUT OF PRODUCTION ** 

This is a Collini Cutlery Exclusive - Only available in 100 serialized pieces

Intended Use: collection / EDC / CQD
Type of production: industrial, Limited
Blade: N690 stainless steel in 58HRC with hollow ground fuller
Blade Treatment: Black Testudo
Blade Production: Italy
Handle: Titanium machined from solid.
Closing system: Frame Lock with swing and safe removable stainless steel
Blade length: 75mm.
Blade Thickness: 6.3mm.
Overall length: 180mm.
Weight: 190g.
Clips: stainless steel, reversible, deep pocket, tip up
Notes: Conical Skull Crasher engaged in the shank - Limited and serialized edition in only 100 pieces
Box: Cardboard, serialized, with Extrema Ratio and Coltelleria Collini logos

Extrema Ratio is proud to present the Culter Venatorius that, so as not to contradict the current address is a technical knife, practical, perhaps a bit 'specialized and that gives a nod to tradition and to the tastes of the most traditionalist hunters who like to do everything yourself.

The Latin motto engraved on the blade reads:

"I am the hunting knife, I am the claw beak and fang of my master. My job is as old as the flesh and blood.", We find that describes significantly the pure essence of the instrument.

We feel to say that if a tool could be capable of humor probably would have added: "It 'a dirty job ... but someone has to do it ...".

The Culter Venatorius, more than a knife, is a complete equipment for slaughtering and skinning of medium and medium-large sized prey, suitable for ungulate hunters.

The kit includes: a knife to slaughter and general use, one skinner provided with cross handle to skin and clean the internal organs the animal, a carver to skin head and snout and a stone with two grains for regrinding of all instruments.

These accessories are contained in the sleeve pocket leather fat-crafted.

The sheath while maintaining the traditional lines, is completely reversible (both the pocket that the passer can be disassembled and applied on the other face of the sheath) and to secure the side which holds the knife has the ambidextrous release. The sheath is handmade by a master saddler leather first-aged choice.

And 'possible to bring the sheath is vertical to the belt connected to the leg, which in a comfortable horizontal position, the shoulder or stopped at the waist with a long belt kit with buckle and snap hooks.

The handle in cocobolo oiled is long enough to allow the use of the knife as a little machete or chopper and thin enough to allow precision cuts.

The blade is in the classic Bohler N690, an excellent steel chrome molybdenum vanadium and cobalt which deserved to become a standard in technical and professional cutlery.

The finish is satin.

The Culter Venatorius is dedicated to all those who wish an Extrema Ratio as batting partner.

- BLADE LENGTH: mm 195
- LENGTH: 340 mm
- BLADE THICKNESS: 6.3 mm
- WEIGHT: 360 g
- BLADE STEEL: BOHLER N690 (58HRC)
- HANDLE MATERIAL: Cocobolo oiled
- GEAR: NO
- SURFACE FINISH / TREATMENT: Satin
- LIMITED EDITION: 300 pieces (serial number on the blade in Roman numerals)